Implicit large eddy simulation of a supersonic flat-plate boundary layer flow by weighted compact nonlinear scheme

The performance of implicit large eddy simulation (ILES) of a supersonic flat-plate turbulent boundary layer flow by weighted compact nonlinear scheme (WCNS) has been investigated. In view of features of WCNS and ILES, it was expected that ILES by WCNS could be an efficient approach to perform LES of supersonic turbulent flows. The flowfield calculated by WCNS was of lower turbulent intensity compared with an explicit LES data obtained by a numerical scheme of the same order of accuracy on a computational grid of similar resolution. It was concluded that the numerical dissipation inherent in WCNS is so large that applying WCNS to ILES of this flowfield is inefficient compared with explicit LES.     

Usability of explicit filtering in large eddy simulation with a low‐order numerical scheme and different subgrid‐scale models

Based on a priori tests, in large eddy simulation (LES) of turbulent fluid flow, the numerical error related to low‐order finite‐difference‐type methods can be large in comparison with the effect of subgrid‐scale (SGS) model. Explicit filtering has been suggested to reduce the error, and it has shown promising results in a priori studies and in some simulations with fourth‐order method. In this paper, the effect of explicit filtering on the total simulation error is studied together with a second‐order scheme, where the numerical error should be even larger. The fully developed turbulent channel flow between two parallel walls is used as a test case. Rather simple SGS models are applied, because these models are most likely used in practical applications of LES. Explicit filtering is here applied to the non‐linear convection term of the Navier–Stokes equations, four three‐dimensional filter functions are applied, and the effect of filtering is separated from the effect of SGS modelling. It is shown that the effect of filtering is rather large and smooth filters introduce an additional error component that increases the total simulation error. Finally, filtering via subfilter‐scale modelling is applied, and it is shown that this approach performs better. However, the large‐frequency components of the resolved flow field are not as effectively damped as when the non‐linear convection term is filtered. Copyright © 2007 John Wiley & Sons, Ltd.     

A time‐implicit high‐order compact differencing and filtering scheme for large‐eddy simulation

This work investigates a high‐order numerical method which is suitable for performing large‐eddy simulations, particularly those containing wall‐bounded regions which are considered on stretched curvilinear meshes. Spatial derivatives are represented by a sixth‐order compact approximation that is used in conjunction with a tenth‐order non‐dispersive filter. The scheme employs a time‐implicit approximately factored finite‐difference algorithm, and applies Newton‐like subiterations to achieve second‐order temporal and sixth‐order spatial accuracy. Both the Smagorinsky and dynamic subgrid‐scale stress models are incorporated in the computations, and are used for comparison along with simulations where no model is employed. Details of the method are summarized, and a series of classic validating computations are performed. These include the decay of compressible isotropic turbulence, turbulent channel flow, and the subsonic flow past a circular cylinder. For each of these cases, it was found that the method was robust and provided an accurate means of describing the flowfield, based upon comparisons with previous existing numerical results and experimental data. Published in 2003 by John Wiley & Sons, Ltd.     

A study on the behaviour of high-order flux reconstruction method with different low-dissipation numerical fluxes for large eddy simulation

This work focuses on the numerical dissipation features of high-order flux reconstruction (FR) method combined with different numerical fluxes in turbulence flows. The famous Roe and AUSM+ numerical fluxes together with their corresponding low-dissipation enhanced versions (LMRoe, SLAU2) and higher resolution variants (HR-LMRoe, HR-SLAU2) are incorporated into FR framework, and the dissipation interplay of these combinations is investigated in implicit large eddy simulation. The numerical dissipation stemming from these convective numerical fluxes is quantified by simulating the inviscid Gresho vortex, the transitional Taylor–Green vortex and the homogenous decaying isotropic turbulence. The results suggest that low-dissipation enhanced versions are preferential both in high-order and low-order cases to their original forms, while the use of HR-SLAU2 has marginal improvements and the HR-LMRoe leads to degenerated solution with high-order. In high-order the effects of numerical fluxes are reduced, and their viscosity may not be dissipative enough to provide physically consistent turbulence when under-resolved.     

Parallel large eddy simulation of turbulent flow around MIRA model using linear equal‐order finite element method

A parallel large eddy simulation code that adopts domain decomposition method has been developed for large‐scale computation of turbulent flows around an arbitrarily shaped body. For the temporal integration of the unsteady incompressible Navier–Stokes equation, fractional 4‐step splitting algorithm is adopted, and for the modelling of small eddies in turbulent flows, the Smagorinsky model is used. For the parallelization of the code, METIS and Message Passing Interface Libraries are used, respectively, to partition the computational domain and to communicate data between processors. To validate the parallel architecture and to estimate its performance, a three‐dimensional laminar driven cavity flow inside a cubical enclosure has been solved. To validate the turbulence calculation, the turbulent channel flows at Re_τ = 180 and 1050 are simulated and compared with previous results. Then, a backward facing step flow is solved and compared with a DNS result for overall code validation. Finally, the turbulent flow around MIRA model at Re = 2.6 × 10⁶ is simulated by using approximately 6.7 million nodes. Scalability curve obtained from this simulation shows that scalable results are obtained. The calculated drag coefficient agrees better with the experimental result than those previously obtained by using two‐equation turbulence models. Copyright © 2007 John Wiley & Sons, Ltd.     

An unsteady incompressible Navier–Stokes solver for large eddy simulation of turbulent flows

An unsteady incompressible Navier–Stokes solver that uses a dual time stepping method combined with spatially high‐order‐accurate finite differences, is developed for large eddy simulation (LES) of turbulent flows. The present solver uses a primitive variable formulation that is based on the artificial compressibility method and various convergence–acceleration techniques are incorporated to efficiently simulate unsteady flows. A localized dynamic subgrid model, which is formulated using the subgrid kinetic energy, is employed for subgrid turbulence modeling. To evaluate the accuracy and the efficiency of the new solver, a posteriori tests for various turbulent flows are carried out and the resulting turbulence statistics are compared with existing experimental and direct numerical simulation (DNS) data. Copyright © 1999 John Wiley & Sons, Ltd.     

A new multi‐domain/multi‐resolution method for large‐eddy simulation

A new multi‐domain/multi‐resolution method is presented in the framework of the large‐eddy simulation (LES). The proposed treatment at the interfaces is conceived to deal with the problem of discontinuities on the characteristic length scales met in the case of two domains having different resolutions. It gives rise to an original approach taking into account not only the discontinuous aspect on the flow fields values but also, consequently, the non‐conservative aspect of transfer of fluxes through the interfaces. This new treatment at the interfaces has been assessed successfully in the case of a subsonic compressible channel flow. Copyright © 2001 John Wiley & Sons, Ltd.     

Large eddy simulation using a dynamic mixing length subgrid‐scale model

A novel dynamic mixing length (DML) subgrid‐scale model for large eddy simulations is proposed in this work to improve the cutoff length of the Smagorinsky model. The characteristic mixing length (or the characteristic wave number) is dynamically estimated for the subgrid‐scale fluctuation of turbulence by the cutoff wave‐number, k_c, and the dissipation wave‐number, k_d. The dissipation wave number is derived from the kinetic energy spectrum equation and the dissipation spectrum equation. To prove the promise of the DML model, this model is used to simulate the lid‐driven cubical cavity with max‐velocity‐based Reynolds numbers 8850 and 12,000, the channel flows with friction‐velocity‐based Reynolds numbers 180, 395, 590, and 950, and the turbulent flow past a square cylinder at the higher Reynolds number 21,400, respectively, compared with the Smagorinsky model and Germano et al.'s dynamic Smagorinsky model. Different numerical experiments with different Reynolds numbers show that the DML model can be used in simulations of flows with a wide range of Reynolds numbers without the occurrence of singular values. The DML model can alleviate the dissipation of the Smagorinsky model without the loss of its robustness. The DML model shows some advantages over Germano et al.'s dynamic Smagorinsky model in its high stability and simplicity of calculation because the coefficient of the DML model always stays positive. The characteristic mixing length in the DML model reflects the subgrid‐scale fluctuation of turbulence in nature and thus the characteristic mixing length has a spatial and temporal distribution in turbulent flow. Copyright © 2011 John Wiley & Sons, Ltd.     

An improved near‐wall modeling for large‐eddy simulation using immersed boundary methods

An improved near‐wall modeling for large‐eddy simulation using the immersed boundary method is proposed. It is shown in this study that the existing near‐wall modeling for the immersed boundary (IB) methods that imposes the velocity boundary condition at the IB node is not sufficient to enforce a correct wall shear stress at the IB node. A new method that imposes a shear stress condition through the modification of the subgrid scale‐eddy viscosity at the IB node is proposed. In this method, the subgrid eddy viscosity at the IB node is modified such that the viscous flux at the face adjacent to the IB node correctly approximates the total shear stress. The method is applied to simulate the fully developed turbulent flows in a plane channel and a circular pipe. It is demonstrated that the new method improves the prediction of the mean velocity and turbulence stresses in comparison with the existing wall modeling based solely on the velocity boundary condition. Copyright © 2015 John Wiley & Sons, Ltd.     

Comparative study of implicit and subgrid‐scale model large‐eddy simulation techniques for low‐Reynolds number airfoil applications

A computational study of a high‐fidelity, implicit large‐eddy simulation (ILES) technique with and without the use of the dynamic Smagorinsky subgrid‐scale (SGS) model is conducted to examine the contributions of the SGS model on solutions of transitional flow over the SD7003 airfoil section. ILES without an SGS model has been shown in the past to produce comparable and sometimes favorable results to traditional SGS‐based large‐eddy simulation (LES) when applied to canonical turbulent flows. This paper evaluates the necessity of the SGS model for low‐Reynolds number airfoil applications to affirm the use of ILES without SGS‐modeling for a broader class of problems such as those pertaining to micro air vehicles and low‐pressure turbines. It is determined that the addition of the dynamic Smagorinsky model does not significantly affect the time‐mean flow or statistical quantities measured around the airfoil section for the spatial resolutions and Reynolds numbers examined in this study. Additionally, the robustness and reduced computational cost of ILES without the SGS model demonstrates the attractiveness of ILES as an alternative to traditional LES. Published 2012. This article is a US Government work and is in the public domain in the USA.     

A local mesh refinement approach for large‐eddy simulations of turbulent flows

In this paper, a local mesh refinement (LMR) scheme on Cartesian grids for large‐eddy simulations is presented. The approach improves the calculation of ghost cell pressures and velocities and combines LMR with high‐order interpolation schemes at the LMR interface and throughout the rest of the computational domain to ensure smooth and accurate transition of variables between grids of different resolution. The approach is validated for turbulent channel flow and flow over a matrix of wall‐mounted cubes for which reliable numerical and experimental data are available. Comparisons of predicted first‐order and second‐order turbulence statistics with the validation data demonstrated a convincing agreement. Importantly, it is shown that mean streamwise velocities and fluctuating turbulence quantities transition smoothly across coarse‐to‐fine and fine‐to‐coarse interfaces. © 2016 The Authors International Journal for Numerical Methods in Fluids Published by John Wiley & Sons Ltd     

A semi‐implicit scheme for large Eddy simulation of piston engine flow and combustion

A semi‐implicit scheme is presented for large eddy simulation of turbulent reactive flow and combustion in reciprocating piston engines. First, the governing equations in a deforming coordinate system are formulated to accommodate the moving piston. The numerical scheme is made up of a fourth‐order central difference for the diffusion terms in the transport equations and a fifth‐order weighted essentially nonoscillatory (WENO) scheme for the convective terms. A second‐ order Adams–Bashforth scheme is used for time integration. For higher density ratios, it is combined with a predictor–corrector scheme. The numerical scheme is explicit for time integration of the transport equations, except for the continuity equation which is used together with the momentum equation to determine the pressure field and velocity field by using a Poisson equation for the pressure correction field. The scheme is aimed at the simulation of low Mach number flows typically found in piston engines. An efficient multigrid method that can handle high grid aspect ratio is presented for solving the pressure correction equation. The numerical scheme is evaluated on two test engines, a laboratory four‐stroke engine with rectangular‐shaped engine geometry where detailed velocity measurements are available, and a modified truck engine with practical cylinder geometry where lean ethanol/air mixture is combusted under a homogeneous charge compression ignition (HCCI) condition. Copyright © 2012 John Wiley & Sons, Ltd.     

Large eddy simulation of turbulent shallow water flows using multi‐relaxation‐time lattice Boltzmann model

In this paper, the standard Smagorinsky's algorithm is embedded into the multiple relaxation time (MRT) lattice Boltzmann model (LBM) for large eddy simulation (LES) of turbulent shallow water flows (MRT‐LABSWE^TM). The model is based on the two‐dimensional nonlinear shallow water equations, giving the depth‐averaged features. It is verified by applying the model in three typical cases in engineering with turbulence: (i) the flow around a square cylinder, (ii) plane cavity flow, and (iii) flows in a junction of 90°. The results obtained by the MRT‐LABSWE^TM are compared with BGK‐LABSWE^TM results and experimental data. The objectives of this study are to validate the MRT‐LABSWE^TM in a turbulence simulation and perform a comparative analysis between the results of BGK‐LABSWE^TM and MRT‐LABSWE^TM. Copyright © 2012 John Wiley & Sons, Ltd.     

A comparative study of inflow conditions for two‐ and three‐dimensional spatially developing mixing layers using large eddy simulation

A series of spatially developing mixing layers are simulated using the large eddy simulation (LES) technique. A hyperbolic tangent function and data derived from boundary layer simulations are used to generate the inflow condition, and their effects on the flow are compared. The simulations are performed in both two and three dimensions. In two‐dimensional simulations, both types of inflow conditions produce a layer that grows through successive pairings of Kelvin–Helmholtz (K–H) vortices, but the composition ratio is lower for the hyperbolic tangent inflow simulations. The two‐dimensional simulations do not undergo a transition to turbulence. The three‐dimensional simulations produce a transition to turbulence, and coherent structures are found in the post‐transition region of the flow. The composition ratio of the three‐dimensional layers is reduced in comparison to the counterpart two‐dimensional runs. The mechanisms of growth are investigated in each type of simulation, and amalgamative pairing interactions are found in the pre‐transition region of the three‐dimensional simulations, and throughout the entire computational domain of those carried out in two‐dimensions. The structures beyond the post‐transition region of the three‐dimensional simulations appear to behave in a much different manner to their pre‐transition cousins, with no pairing‐type interactions observed in the turbulent flow. In order to accurately simulate spatially developing mixing layers, it is postulated that the inflow conditions must closely correspond to the conditions present in the reference experiment. Copyright © 2007 John Wiley & Sons, Ltd.