共查询到20条相似文献,搜索用时 31 毫秒
1.
A σ‐coordinate non‐hydrostatic model, combined with the embedded Boussinesq‐type‐like equations, a reference velocity, and an adapted top‐layer control, is developed to study the evolution of deep‐water waves. The advantage of using the Boussinesq‐type‐like equations with the reference velocity is to provide an analytical‐based non‐hydrostatic pressure distribution at the top‐layer and to optimize wave dispersion property. The σ‐based non‐hydrostatic model naturally tackles the so‐called overshooting issue in the case of non‐linear steep waves. Efficiency and accuracy of this non‐hydrostatic model in terms of wave dispersion and nonlinearity are critically examined. Overall results show that the newly developed model using a few layers is capable of resolving the evolution of non‐linear deep‐water wave groups. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
2.
An implicit finite volume model in sigma coordinate system is developed to simulate two‐dimensional (2D) vertical free surface flows, deploying a non‐hydrostatic pressure distribution. The algorithm is based on a projection method which solves the complete 2D Navier–Stokes equations in two steps. First the pressure term in the momentum equations is excluded and the resultant advection–diffusion equations are solved. In the second step the continuity and the momentum equation with only the pressure terms are solved to give a block tri‐diagonal system of equation with pressure as the unknown. This system can be solved by a direct matrix solver without iteration. A new implicit treatment of non‐hydrostatic pressure, similar to the lower layers is applied to the top layer which makes the model free of any hydrostatic pressure assumption all through the water column. This treatment enables the model to evaluate both free surface elevation and wave celerity more accurately. A series of numerical tests including free‐surface flows with significant vertical accelerations and nonlinear behaviour in shoaling zone are performed. Comparison between numerical results, analytical solutions and experimental data demonstrates a satisfactory performance. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
3.
XinJian Chen 《国际流体数值方法杂志》2003,42(9):929-952
The hydrostatic pressure assumption has been widely used in studying water movements in rivers, lakes, estuaries, and oceans. While this assumption is valid in many cases and has been successfully used in numerous studies, there are many cases where this assumption is questionable. This paper presents a three‐dimensional, hydrodynamic model for free‐surface flows without using the hydrostatic pressure assumption. The model includes two predictor–corrector steps. In the first predictor–corrector step, the model uses hydrostatic pressure at the previous time step as an initial estimate of the total pressure field at the new time step. Based on the estimated pressure field, an intermediate velocity field is calculated, which is then corrected by adding the non‐hydrostatic component of the pressure to the estimated pressure field. A Poisson equation for non‐hydrostatic pressure is solved before the second intermediate velocity field is calculated. The final velocity field is found after the free surface at the new time step is computed by solving a free‐surface correction equation. The numerical method was validated with several analytical solutions and laboratory experiments. Model results agree reasonably well with analytical solutions and laboratory results. Model simulations suggest that the numerical method presented is suitable for fully hydrodynamic simulations of three‐dimensional, free‐surface flows. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
4.
A three‐dimensional numerical model is developed for incompressible free surface flows. The model is based on the unsteady Reynolds‐averaged Navier–Stokes equations with a non‐hydrostatic pressure distribution being incorporated in the model. The governing equations are solved in the conventional sigma co‐ordinate system, with a semi‐implicit time discretization. A fractional step method is used to enable the pressure to be decomposed into its hydrostatic and hydrodynamic components. At every time step one five‐diagonal system of equations is solved to compute the water elevations and then the hydrodynamic pressure is determined from a pressure Poisson equation. The model is applied to three examples to simulate unsteady free surface flows where non‐hydrostatic pressures have a considerable effect on the velocity field. Emphasis is focused on applying the model to wave problems. Two of the examples are about modelling small amplitude waves where the hydrostatic approximation and long wave theory are not valid. The other example is the wind‐induced circulation in a closed basin. The numerical solutions are compared with the available analytical solutions for small amplitude wave theory and very good agreement is obtained. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
5.
A three‐dimensional, non‐hydrostatic pressure, numerical model with k–ε equations for small amplitude free surface flows is presented. By decomposing the pressure into hydrostatic and non‐hydrostatic parts, the numerical model uses an integrated time step with two fractional steps. In the first fractional step the momentum equations are solved without the non‐hydrostatic pressure term, using Newton's method in conjunction with the generalized minimal residual (GMRES) method so that most terms can be solved implicitly. This method only needs the product of a Jacobian matrix and a vector rather than the Jacobian matrix itself, limiting the amount of storage and significantly decreasing the overall computational time required. In the second step the pressure–Poisson equation is solved iteratively with a preconditioned linear GMRES method. It is shown that preconditioning reduces the central processing unit (CPU) time dramatically. In order to prevent pressure oscillations which may arise in collocated grid arrangements, transformed velocities are defined at cell faces by interpolating velocities at grid nodes. After the new pressure field is obtained, the intermediate velocities, which are calculated from the previous fractional step, are updated. The newly developed model is verified against analytical solutions, published results, and experimental data, with excellent agreement. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
6.
7.
This paper presents a two‐dimensional finite element model for simulating dynamic propagation of weakly dispersive waves. Shallow water equations including extra non‐hydrostatic pressure terms and a depth‐integrated vertical momentum equation are solved with linear distributions assumed in the vertical direction for the non‐hydrostatic pressure and the vertical velocity. The model is developed based on the platform of a finite element model, CCHE2D. A physically bounded upwind scheme for the advection term discretization is developed, and the quasi second‐order differential operators of this scheme result in no oscillation and little numerical diffusion. The depth‐integrated non‐hydrostatic wave model is solved semi‐implicitly: the provisional flow velocity is first implicitly solved using the shallow water equations; the non‐hydrostatic pressure, which is implicitly obtained by ensuring a divergence‐free velocity field, is used to correct the provisional velocity, and finally the depth‐integrated continuity equation is explicitly solved to satisfy global mass conservation. The developed wave model is verified by an analytical solution and validated by laboratory experiments, and the computed results show that the wave model can properly handle linear and nonlinear dispersive waves, wave shoaling, diffraction, refraction and focusing. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
8.
This paper presents the derivation of a depth‐integrated wave propagation and runup model from a system of governing equations for two‐layer non‐hydrostatic flows. The governing equations are transformed into an equivalent, depth‐integrated system, which separately describes the flux‐dominated and dispersion‐dominated processes. The depth‐integrated system reproduces the linear dispersion relation within a 5 error for water depth parameter up to kd = 11, while allowing direct implementation of a momentum conservation scheme to model wave breaking and a moving‐waterline technique for runup calculation. A staggered finite‐difference scheme discretizes the governing equations in the horizontal dimension and the Keller box scheme reconstructs the non‐hydrostatic terms in the vertical direction. An semi‐implicit scheme integrates the depth‐integrated flow in time with the non‐hydrostatic pressure determined from a Poisson‐type equation. The model is verified with solitary wave propagation in a channel of uniform depth and validated with previous laboratory experiments for wave transformation over a submerged bar, a plane beach, and fringing reefs. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
9.
A coupled surface‐subsurface model for hydrostatic flows under saturated and variably saturated conditions
下载免费PDF全文
![点击此处可从《国际流体数值方法杂志》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Vincenzo Casulli 《国际流体数值方法杂志》2017,85(8):449-464
In this paper, the governing differential equations for hydrostatic surface‐subsurface flows are derived from the Richards and from the Navier‐Stokes equations. A vertically integrated continuity equation is formulated to account for both surface and subsurface flows under saturated and variable saturated conditions. Numerically, the horizontal domain is covered by an unstructured orthogonal grid that may include subgrid specifications. Along the vertical direction, a simple z‐layer discretization is adopted. Semi‐implicit finite difference equations for velocities, and a finite volume approximation for the vertically integrated continuity equation, are derived in such a fashion that, after simple manipulation, the resulting discrete pressure equation can be assembled into a single, two‐dimensional, mildly nonlinear system. This system is solved by a nested Newton‐type method, which yields simultaneously the (hydrostatic) pressure and a nonnegative fluid volume throughout the computational grid. The resulting algorithm is relatively simple, extremely efficient, and very accurate. Stability, convergence, and exact mass conservation are assured throughout also in presence of wetting and drying, in variable saturated conditions, and during flow transition through the soil interface. A few examples illustrate the model applicability and demonstrate the effectiveness of the proposed algorithm. 相似文献
10.
An implicit finite difference model in the σ co‐ordinate system is developed for non‐hydrostatic, two‐dimensional vertical plane free‐surface flows. To accurately simulate interaction of free‐surface flows with uneven bottoms, the unsteady Navier–Stokes equations and the free‐surface boundary condition are solved simultaneously in a regular transformed σ domain using a fully implicit method in two steps. First, the vertical velocity and pressure are expressed as functions of horizontal velocity. Second, substituting these relationship into the horizontal momentum equation provides a block tri‐diagonal matrix system with the unknown of horizontal velocity, which can be solved by a direct matrix solver without iteration. A new treatment of non‐hydrostatic pressure condition at the top‐layer cell is developed and found to be important for resolving the phase of wave propagation. Additional terms introduced by the σ co‐ordinate transformation are discretized appropriately in order to obtain accurate and stable numerical results. The developed model has been validated by several tests involving free‐surface flows with strong vertical accelerations and non‐linear waves interacting with uneven bottoms. Comparisons among numerical results, analytical solutions and experimental data show the capability of the model to simulate free‐surface flow problems. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
11.
A three‐dimensional numerical model based on the full Navier–Stokes equations (NSE) in σ‐coordinate is developed in this study. The σ‐coordinate transformation is first introduced to map the irregular physical domain with the wavy free surface and uneven bottom to the regular computational domain with the shape of a rectangular prism. Using the chain rule of partial differentiation, a new set of governing equations is derived in the σ‐coordinate from the original NSE defined in the Cartesian coordinate. The operator splitting method (Li and Yu, Int. J. Num. Meth. Fluids 1996; 23 : 485–501), which splits the solution procedure into the advection, diffusion, and propagation steps, is used to solve the modified NSE. The model is first tested for mass and energy conservation as well as mesh convergence by using an example of water sloshing in a confined tank. Excellent agreements between numerical results and analytical solutions are obtained. The model is then used to simulate two‐ and three‐dimensional solitary waves propagating in constant depth. Very good agreements between numerical results and analytical solutions are obtained for both free surface displacements and velocities. Finally, a more realistic case of periodic wave train passing through a submerged breakwater is simulated. Comparisons between numerical results and experimental data are promising. The model is proven to be an accurate tool for consequent studies of wave‐structure interaction. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
12.
Details are given of the development of a two‐dimensional vertical numerical model for simulating unsteady free‐surface flows, using a non‐hydrostatic pressure distribution. In this model, the Reynolds equations and the kinematic free‐surface boundary condition are solved simultaneously, so that the water surface elevation can be integrated into the solution and solved for, together with the velocity and pressure fields. An efficient numerical algorithm has been developed, deploying implicit parameters similar to those used in the Crank–Nicholson method, and generating a block tri‐diagonal algebraic system of equations. The model has been applied to simulate a range of unsteady flow problems involving relatively strong vertical accelerations. The results show that the numerical algorithm described is able to produce accurate predictions and is also easy to apply. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
13.
Comparing analytical and numerical solution of nonlinear two and three‐dimensional hydrostatic flows
New test cases for frictionless, three‐dimensional hydrostatic flows have been derived from some known analytical solutions of the two‐dimensional shallow water equations. The flow domain is a paraboloid of revolution and the flow is determined by the initial conditions, the nonlinear advective terms, the Coriolis acceleration and by the hydrostatic pressure. Wetting and drying is also included. Some specific properties of the exact solutions are discussed under different hypothesis and relative importance of the forcing terms. These solutions are proposed for testing the stability, the accuracy and the efficiency of numerical models to be used for simulating environmental hydrostatic flows. The computed solutions obtained with a semi‐implicit finite difference—finite volume algorithm on unstructured grid are compared with the corresponding analytical solutions in both two and three space dimension. Excellent agreement are obtained for the velocity and for the resulting water surface elevation. Comparison of the computed inundation area also shows a good agreement with the analytical solution with degrading accuracy observed when the inundation area becomes relatively large and for long simulation time. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
14.
Incompressible multiphase flow and encapsulation simulations using the moment‐of‐fluid method
下载免费PDF全文
![点击此处可从《国际流体数值方法杂志》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Guibo Li Yongsheng Lian Yisen Guo Matthew Jemison Mark Sussman Trevor Helms Marco Arienti 《国际流体数值方法杂志》2015,79(9):456-490
A moment‐of‐fluid method is presented for computing solutions to incompressible multiphase flows in which the number of materials can be greater than two. In this work, the multimaterial moment‐of‐fluid interface representation technique is applied to simulating surface tension effects at points where three materials meet. The advection terms are solved using a directionally split cell integrated semi‐Lagrangian algorithm, and the projection method is used to evaluate the pressure gradient force term. The underlying computational grid is a dynamic block‐structured adaptive grid. The new method is applied to multiphase problems illustrating contact‐line dynamics, triple junctions, and encapsulation in order to demonstrate its capabilities. Examples are given in two‐dimensional, three‐dimensional axisymmetric (R–Z), and three‐dimensional (X–Y–Z) coordinate systems. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
15.
The development of a numerical scheme for non‐hydrostatic free surface flows is described with the objective of improving the resolution characteristics of existing solution methods. The model uses a high‐order compact finite difference method for spatial discretization on a collocated grid and the standard, explicit, single step, four‐stage, fourth‐order Runge–Kutta method for temporal discretization. The Cartesian coordinate system was used. The model requires the solution of two Poisson equations at each time‐step and tridiagonal matrices for each derivative at each of the four stages in a time‐step. Third‐ and fourth‐order accurate boundaries for the flow variables have been developed including the top non‐hydrostatic pressure boundary. The results demonstrate that numerical dissipation which has been a problem with many similar models that are second‐order accurate is practically eliminated. A high accuracy is obtained for the flow variables including the non‐hydrostatic pressure. The accuracy of the model has been tested in numerical experiments. In all cases where analytical solutions are available, both phase errors and amplitude errors are very small. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
16.
An unstructured finite volume technique for the 3D Poisson equation on arbitrary geometry using a σ‐coordinate system
下载免费PDF全文
![点击此处可从《国际流体数值方法杂志》网站下载免费的PDF全文](/ch/ext_images/free.gif)
We present a solver for a three‐dimensional Poisson equation issued from the Navier–Stokes equations applied to model rivers, estuaries, and coastal flows. The three‐dimensional physical domain is composed of an arbitrary domain in the horizontal direction and is bounded by an irregular free surface and bottom in the vertical direction. The equations are transformed vertically to the σ‐coordinate system to obtain an accurate representation of top and bottom topographies. The method is based on a second‐order finite volume technique on prisms consisting of triangular grids in the horizontal direction. The algorithm is accompanied by an analysis of different linear system solvers in order to achieve fast solutions. Numerical experiments are conducted to test the numerical accuracy and the computational efficiency of the proposed method. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
17.
18.
A numerical model has been developed for simulating density‐stratified flow in domains with irregular but simple topography. The model was designed for simulating strong interactions between internal gravity waves and topography, e.g. exchange flows in contracting channels, tidally or convectively driven flow over two‐dimensional sills or waves propagating onto a shoaling bed. The model is based on the non‐hydrostatic, Boussinesq equations of motion for a continuously stratified fluid in a rotating frame, subject to user‐configurable boundary conditions. An orthogonal boundary fitting co‐ordinate system is used for the numerical computations, which rely on a fourth‐order compact differentiation scheme, a third‐order explicit time stepping and a multi‐grid based pressure projection algorithm. The numerical techniques are described and a suite of validation studies are presented. The validation studies include a pointwise comparison of numerical simulations with both analytical solutions and laboratory measurements of non‐linear solitary wave propagation. Simulation results for flows lacking analytical or laboratory data are analysed a posteriori to demonstrate satisfaction of the potential energy balance. Computational results are compared with two‐layer hydraulic predictions in the case of exchange flow through a contracting channel. Finally, a simulation of circulation driven by spatially non‐uniform surface buoyancy flux in an irregular basin is discussed. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
19.
A conservative semi‐implicit method for coupled surface–subsurface flows in regional scale
下载免费PDF全文
![点击此处可从《国际流体数值方法杂志》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Vincenzo Casulli 《国际流体数值方法杂志》2015,79(4):199-214
A semi‐implicit method for coupled surface–subsurface flows in regional scale is proposed and analyzed. The flow domain is assumed to have a small vertical scale as compared with the horizontal extents. Thus, after hydrostatic approximation, the simplified governing equations are derived from the Reynolds averaged Navier–Stokes equations for the surface flow and from the Darcy's law for the subsurface flow. A conservative free‐surface equation is derived from a vertical integral of the incompressibility condition and extends to the whole water column including both, the surface and the subsurface, wet domains. Numerically, the horizontal domain is covered by an unstructured orthogonal grid that may include subgrid specifications. Along the vertical direction a simple z‐layer discretization is adopted. Semi‐implicit finite difference equations for velocities and a finite volume approximation for the free‐surface equation are derived in such a fashion that, after simple manipulation, the resulting discrete free‐surface equation yields a single, well‐posed, mildly nonlinear system. This system is efficiently solved by a nested Newton‐type iterative method that yields simultaneously the pressure and a non‐negative fluid volume throughout the computational grid. The time‐step size is not restricted by stability conditions dictated by friction or surface wave speed. The resulting algorithm is simple, extremely efficient, and very accurate. Exact mass conservation is assured also in presence of wetting and drying dynamics, in pressurized flow conditions, and during free‐surface transition through the interface. A few examples illustrate the model applicability and demonstrate the effectiveness of the proposed algorithm. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
20.
An efficient curvilinear non‐hydrostatic free surface model is developed to simulate surface water waves in horizontally curved boundaries. The generalized curvilinear governing equations are solved by a fractional step method on a rectangular transformed domain. Of importance is to employ a higher order (either quadratic or cubic spline function) integral method for the top‐layer non‐hydrostatic pressure under a staggered grid framework. Model accuracy and efficiency, in terms of required vertical layers, are critically examined on a linear progressive wave case. The model is then applied to simulate waves propagating in a canal with variable widths, cnoidal wave runup around a circular cylinder, and three‐dimensional wave transformation in a circular channel. Overall the results show that the curvilinear non‐hydrostatic model using a few, e.g. 2–4, vertical layers is capable of simulating wave dispersion, diffraction, and reflection due to curved sidewalls. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献