Electromagnetic small-scale modeling of composite panels involving periodic arrays of circular fibers

Electromagnetic modeling of composite panels as planar multilayers involving a periodic set of circular cylindrical fibers in each constitutive layer is considered. As a first step, the case of a single layer is studied. Combining multipole method and plane-wave expansion leads to full-wave field representations in all space, yielding in particular reflection and transmission coefficients for TE/TM oblique plane-wave illuminations. Gaussian beams are accounted for via a Fourier transform and numerical quadrature scheme. Comparisons with data available for photonic crystals show the accuracy of the method, while results for fiber-reinforced composites illustrate its effectiveness.     

Damage evolution and multi-scale analysis of carbon fiber-reinforced cross-ply laminate with thermal residual stress

In order to study the mechanical and thermal properties of carbon fiber-reinforced cross-ply laminate, a macroscopic [90/0]_8S cross-ply laminate model and a unit cell of fiber regular distribution near the [90/0]_8S laminate interlaminar zone with plastic matrix and interface were created. Then the damage initiation discipline details of [90/0]_8S cross-ply laminate are researched, and the effects of interfacial coefficient of thermal expansion on thermal residual stress distribution and damage initiation are researched in detail both based on the macroscopic and microscopic models. It shows that the initial damage of interlaminar interface occurs in macroscopic model and the initial damage in microscopic model occurs both at intralaminar interface and interlaminar cohesive zone. No matter in macroscopic or microscopic model, the residual stress of 6.27 × 10^?6/°C interfacial coefficient of thermal expansion is larger than that of 6.27 × 10^?7/°C interfacial coefficient of thermal expansion. And the initial damage expands more widely in the first one.     

Fabrication of continuous fiber-reinforced thermoplastic composites with structural gradient from sheath-core type bicomponent fibers

Sheath-core type bicomponent fibers of polypropylene (PP) as a sheath component and thermotropic liquid crystalline polymer (TLCP) as a core component were prepared by the highspeed melt spinning process. Continuous fiber reinforced thermoplastic composites, in which TLCP acts as a reinforcing fiber and PP as a matrix polymer, were fabricated by the compression molding of these fibers. In the melt spinning, the attainable highest take-up velocity of TLCP was improved by co-processing with PP. Tensile modulus and strength of the TLCP component in the PP/TLCP bicomponent fibers increased with an increase in the take-up velocity. Comparison of wide-angle X-ray diffraction patterns of starting bicomponent fibers and fabricated composites indicated that the orientation relaxation of TLCP did not occur in the compression molding process. Accordingly, the tensile modulus and strength of the PP/TLCP composites were similar to those of the bicomponent fibers. Continuous fiber reinforced thermoplastic composites with various types of fiber content distributions were fabricated from the bicomponent fibers in which sheath-core composition was changed gradually in the spinning process. In the three-point bending test, the composites with two different types of symmetric structural gradients, one with higher TLCP fiber content near the surfaces than in the center and the other with higher TLCP content in the center than near the surfaces, exhibited different flexural moduli even though the overall TLCP contents were comparable. In the three-point bending test of a composite with asymmetric structural gradient, the yielding behavior and maximum flexural load varied depending on the direction of load application although the initial flexural moduli were similar.     

口径天线与近区厚介质体复杂系统的电磁建模

针对口径天线及其近区任意厚均匀介质体的复杂系统,应用表面积分方程（SIE）方法结合模式匹配方法（MM）建立了模式激励的新型一体化电磁模型。在馈电端口采取模式匹配方法模拟了波导中的激励情况,将金属壁处理为理想导电体,并在金属壁上利用边界条件建立电场积分方程（EFIE）;利用零场等效原理在介质体内外表面分别建立电场积分方程和磁场积分方程（MFIE）,并组合内外表面建立的电场积分方程和磁场积分方程为PMCHW方程;最后使用矩量法对所建立的EFIE-PMCHW-MM组合方程进行求解。文中结合喇叭天线设计了两个典型算例,所提混合方法EFIE-PMCHW-MM给出的数值结果与商用软件FEKO高度一致,且在求解口径天线与近区厚介质体耦合问题时由于未知量显著减少,大幅度提高了仿真效率,降低了计算机资源消耗。     

Electromagnetic modeling of near-field phase-shifting contact lithography with broadband ultraviolet illumination

Near-field phase-shifting contact lithography is modeled to characterize electromagnetic absorption in a photoresist layer with one face in contact with a quartz binary phase-shift mask. The broadband ultraviolet illumination is represented as a frequency-spectrum of normally incident plane waves. A rigorous coupled-wave analysis is carried out to determine the absorption spectrum of the photoresist layer. The specific absorption rate in the photoresist layer is calculated and examined in relation to the geometric parameters. Columnar features in the photoresist layer are of higher quality on broadband illumination in contrast to monochromatic illumination, in conformity with some recent experimental results. Feature resolution and profile are noticeably affected by the depth of the grooves in the phase-shift mask. Ideally, the feature linewidth can be less than about 100 nm for broadband illumination in the transverse-magnetic mode. These conclusions are subject to modification by the photochemistry-wavelength characteristics of the photoresist.     

Zone-adaptive modeling of turbulent flames with multiple chemical mechanisms

A novel zone-adaptive modeling method (AdaCM) with multiple chemical mechanisms is proposed for turbulent flames to achieve high-fidelity, yet computationally efficient, predictions. Specifically, a computational economical species transport model, e.g., the well-mixed model, via finite volume algorithm is employed with a simple mechanism as the base model for the whole computational domain, while the advanced transported probability density function (TPDF) method via Lagrangian particle tracking is employed with a detailed mechanism only for spatial regions with intense turbulence-chemistry interaction (TCI), denoted as the “PDF regions”. The PDF regions are dynamically identified based on local flow and flame characteristics and may evolve with time. A two-way particle/finite volume submodel coupling is formulated to ensure the composition consistency between submodels in the PDF regions and impose the correct interface conditions for composition and mass flow rate on the boundary of the PDF regions. With regard to transformation between different species representations in the mechanisms, a species reconstruction/reduction approach based on constrained chemical equilibrium is proposed to ensure element conservation and an adequate specification of unrepresented species at the model interface. The proposed adaptive modeling method has been applied to the well-known Sandia Flame D, in which the well-mixed combustion model with a 6-species, two-step global mechanism is employed as a base model and the high-fidelity TPDF with a 25-species skeletal mechanism is employed for regions with intense TCI. Results demonstrate the consistency in PDF regions between submodels with two distinct mechanisms. The predictions from the adaptive modeling are almost identical to those of TPDF and agree well with experimental measurements, illustrating the preservation of prediction accuracy in the adaptive method. In addition, the total number of computational particles in AdaCM for Flame D is only 18% of that for the stand-alone TPDF, and the recorded computational speedup is about 2.8.     

瞬态抑制二极管电磁脉冲响应建模

针对目前浪涌保护器件性能分析方法不完善、缺乏准确数学模型的问题,提出了一种基于NARX神经网络的电磁脉冲响应时域建模方法,并给出NARX神经网络建模的理论基础及设计步骤。通过组建传输线脉冲测试平台及静电放电实验平台,对NUP2105L型瞬态抑制二极管进行注入实验,采集输入输出实验数据并建立NARX神经网络模型。对建模效果进行分析,所建模型可以较为准确地预测输入脉冲为方波脉冲、人体金属模型及机器模型静电放电电磁脉冲时,响应电压曲线趋势、响应时间、脉冲峰值、箝位时间及箝位电压等性能指标,验证了模型的正确性。     

瞬态抑制二极管电磁脉冲响应建模

针对目前浪涌保护器件性能分析方法不完善、缺乏准确数学模型的问题,提出了一种基于NARX神经网络的电磁脉冲响应时域建模方法,并给出NARX神经网络建模的理论基础及设计步骤。通过组建传输线脉冲测试平台及静电放电实验平台,对NUP2105L型瞬态抑制二极管进行注入实验,采集输入输出实验数据并建立NARX神经网络模型。对建模效果进行分析,所建模型可以较为准确地预测输入脉冲为方波脉冲、人体金属模型及机器模型静电放电电磁脉冲时,响应电压曲线趋势、响应时间、脉冲峰值、箝位时间及箝位电压等性能指标,验证了模型的正确性。     

Electromagnetic modeling of multi-wavelength QWIP optical coupling structures

Quantum-well infrared photodetector (QWIP) materials can be engineered to be optically absorbing over a wide range of wavelengths. This enables multi-band focal plane arrays to be realized. However, some of this flexibility is lost due to the required optical coupling structure that converts normally incident light to horizontal propagation to allow absorption. Such coupling structures are typically strongly wavelength-dependent and must be tuned to the waveband of interest. In this study, we perform electromagnetic simulations to understand and optimize optical coupling structures for multi-band QWIPs.     

Intuitive modeling of bend distortion in large-mode-area fibers

Bend distortion is emerging as an important consideration in the design of amplifier fibers with a large mode area, in addition to bend loss and mode-coupling effects. Simple, intuitive estimates of distortion sensitivity are presented for two interesting classes of fibers, in agreement with full numerical simulations.     

Electromagnetic modeling of the CSNS Hion source extraction system

A Penning surface H^- ion source test stand has been developed for the China Spallation Neutron Source (CSNS) at the Institute of High Energy Physics (IHEP). H^- beams with a current up to 50 mA and a pulse length up to 520μs at a repetition rate of 25 Hz are obtained at present. In order to improve the extraction system based on both the results of the emittance measurements in experiment and the simulation results of the effect of the extraction system on the beam emittance, three dimensional electromagnetic finite element analysis and particle tracking are undertaken. First, the magnetic field of the deflecting magnet is studied in detail, and then the effect of the extraction geometry on the beam transport is also investigated.     

Enhancement of multiple four-wave mixing via cascaded fibers with discrete dispersion decreasing

Cascaded fiber geometry with the dispersion of each fiber decreasing is proposed to enhance the multiple four-wave mixing(FWM) generation. The first fiber with relatively large dispersion initiates and accelerates the expansion of multiple FWM, and the second fiber with small dispersion would allow the phase-matching process(thus the spectrum broadening)to keep going. Numerical and experimental results show that with this geometry not only multiple FWM expansion can be accelerated, but also the efficiency of multiple FWM products can be effectively improved with shorter fibers.     

单层膜Kirkpatrick-Baez显微镜的分辨率模型

 分析了几何像差、衍射效应和光学加工精度等因素对不同工作能点的单层膜Kirkpatrick-Baez显微镜成像质量的影响,构建了该显微镜的均方根空间分辨率模型,用Ir单层膜KB显微镜获得了8 keV能量的X射线成像结果,其中心视场的分辨率约为2 mm,±50 mm视场的分辨率优于5 mm。实验结果与分辨率模型的对比表明,中心视场的分辨率受球差、衍射效应和反射镜加工精度的综合影响,边缘视场的分辨率主要由系统的几何像差决定。     

基于电磁拓扑的多腔体屏蔽效能快速算法

提出基于电磁拓扑理论计算开孔多腔体屏蔽效能的快速方法.首先给出双腔体等效电路和电磁拓扑信号流图,并推导孔缝节点处的散射矩阵,给出拓扑网络的散射矩阵方程和传输矩阵方程,获得双腔体的广义Baum-Liu-Tesche(BLT)方程.在此基础上研究了开孔三腔体,包括串型级联三腔体和串并型混合级联三腔体的广义BLT方程.对于串型级联三腔体,其电磁拓扑网络和广义BLT方程在双腔体基础上直接扩展即可获得.而对于串并型混合级联三腔体,通过将位于三腔体公共面上的孔缝等效为三端口网络节点,并根据三端口网络散射参数定义推导获得该节点的散射矩阵,最终得到串并型混合级联三腔体的广义BLT方程.本文方法对双腔体的计算结果与文献结果和实验结果相符合,对3组不同类型和尺寸开孔腔的屏蔽效能的计算结果与时域有限差分法计算结果符合较好.该算法不仅效率高,通过对所有计算结果和实验结果的误差统计分析,表明该算法具有较高的计算准确度.     

Spectroscopic studies of sorbing fibers using combined elements with multiple attenuated total internal reflection

Spectroscopic studies of sorbing devices on the basis of silica capillaries coated by sorbing polymer films are carried out by methods of spectroscopy of multiple attenuated total internal reflection with the use of combined elements of internal reflection. A technique for inspecting and improving the technological process of manufacture of sorbing devices for solid-phase microextraction and subsequent chromatographic analysis of organic compounds is developed.     

Transmission characteristics of VAD fibers using a multiple burner with single source gas nozzle

A vapor phase axial deposition (VAD) method using a multiple burner with single source gas nozzle is presented. Fibers fabricated by this technique feature very low loss and wide bandwidth characteristics, although the refractive index profile slightly deviates from the ideal, on the outer side of the core part. This technique is expected to provide a simple method of fabricating low loss and wide bandwidth fibers.     

Electromagnetic Bloch oscillation in one-dimensional multiple microcavities composed of metamaterials

We propose a photonic structure stacked sequentially by one-dimensional photonic crystals and cavities. The whole structure is composed of single-negative and double-negative materials. The optical Wannier-Stark ladder （WSL） can be obtained in a low frequency region by modulating the widths of the cavities in order. We simulate the dynamical behavior of the electromagnetic wave passing through the proposed photonic structure. Due to the dispersive characteristics of the metamaterials, a very narrow WSL can be obtained. The long-period electromagnetic Bloch oscillation is demonstrated theoretically to have a period on a microsecond time scale.     

多失效模式光电系统可靠性建模分析方法北大核心CSCD

系统可靠性建模分析是开展可靠性分配、预计、故障树分析及可靠性优化设计的基础。介绍了一种光电系统可靠性建模分析方法,针对光电系统中部分分系统具有多种失效模式且各失效模式均服从指数分布的特点,依据齐次马尔科夫理论,采用马尔科夫状态转移图方法建立了产品的可靠性模型,并给出解析表达式、数值计算方法和Monte Carlo仿真方法。最后,将其应用于某机载光电系统供电回路的实例分析中。采用两种计算方法及Monte Carlo仿真方法分别进行计算,并将结果进行对比分析,证明了该方法的正确性及可行性。     

Energy of bonding an adsorbed atom with a single-layer graphene

The change in the local density of states δρ _g of a single-sheet graphene due to adsorption of a single atom has been calculated in the framework of the M model proposed earlier. The dependence of the local density of states δρ _g on the position of the adatom energy level ɛ _a with respect to the Dirac point and other parameters of the problem has been analyzed. It has been shown that the largest changes in the local density of states δρ _g are caused by adatoms with the ɛ _a levels lying in the vicinity of the Dirac point, so that the minimum density of states of graphene remains equal to zero. An analytical expression has been derived for the energy of bonding W _ads of the adatom with graphene. The obtained estimates of the bonding energy W _ads in the weak and strong adatom-substrate bonding regimes are presented. Atoms of alkali metals and halogens have been considered as specific adsorbates.