Synthesis and visible light photocatalytic properties of polyoxometalate-thionine composite films immobilized on porous TiO2 microspheres

Multilayer films (PW(12)-TH)(n) (PW(12)=PW(12)O(40)(3-), TH=thionine) were immobilized on porous anatase TiO(2) microspheres by layer-by-layer (LbL) self-assembly method. The porous structure of TiO(2) was confirmed by transmission electron microscopy (TEM). Scanning electron microscopy (SEM) showed that TiO(2) template particles had a round shape with an average diameter of 250 nm. The composite films were characterized by FTIR spectroscopy, UV diffuse reflectance spectroscopy and XRD spectroscopy. The results confirmed the successful immobilization of (PW(12)-TH)(n) composite films onto TiO(2) microspheres, and the growth of PW(12)-TH layer pair was uniform. SEM and TEM were also used to characterize the morphology. When PW(12)-TH composite films were assembled on the template, the surface became rougher with the increasing number of layer pair. The lattice fringe of TiO(2) became weaker when immobilized (PW(12)-TH)(n). The photocatalytic properties of the microspheres toward a rhodamine B (RhB) solution were investigated under visible light irradiation. The combination of TiO(2) and PW(12) showed an excellent photocatalytic performance. Both TH sensitization and PW(12) adsorption played important roles during the process of photocatalysis. Moreover, the catalytic property and reusability of as-prepared catalyst were relevant to the number of PW(12)-TH bilayer. The kinetics of the photodecomposition to rhodamine B followed the first-order reaction.     

Preparation of mesostructured barium sulfate with high surface area by dispersion method and its characterization

The spherical and cubic mesoporous BaSO(4) particles with high surface area were successfully produced via one-step process through precipitation reaction in aqueous solution of Ba(OH)(2) and H(2)SO(4) with ethylene glycol (n-HOCH(2)CH(2)OH) as a modifying agent. The BaSO(4) nanomaterial revealed that the high surface area and the mesoporous was stable up to 400 degrees C. Agglomerate mesoporous barium sulfate nanomaterials were obtained by the reaction of Ba(2+) and SO(2-)(4) with ethylene glycol aqueous solution. The ethylene glycol was used to control the BaSO(4) particle size and to modify the surface property of the particles produced from the precipitation. The dried and calcined mesoporous BaSO(4) nanomaterials were characterized by X-ray diffraction (XRD), BET surface area and N(2) adsorption-desorption isotherm, scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared resonance (FTIR) and thermogravimetric analysis (TGA). The as-prepared mesoporous dried BaSO(4) possesses a high BET surface area of 91.56 m(2) g(-1), pore volume of 0.188 cm(3) g(-1) (P/P(0)=0.9849) and pore size of 8.22 nm. The SEM indicates that the morphology of BaSO(4) nanomaterial shows shell like particles up to 400 degrees C, after that there is drastically change in the material due to agglomeration. Synthesis of mesoporous BaSO(4) nanomaterial is of significant importance for both sulphuric acid decomposition and oxidation of methane to methanol.     

Porous magnesium carboxylate framework: synthesis, X-ray crystal structure, gas adsorption property and heterogeneous catalytic aldol condensation reaction

A new three-dimensional alkaline-earth metal-organic framework (MOF) compound, [Mg(Pdc)(H(2)O)](n) (1) (H(2)Pdc = pyridine-2,5-dicarboxylic acid), has been synthesized and structurally characterized by single crystal X-ray diffraction analysis. Compound 1 features a 3D porous framework afforded by the Mg(2)-diad centers through formation of interconnected chair like structural motifs. A nitrogen adsorption study confirms the microporosity of compound 1 with a BET surface area of 211 ± 12 m(2) g(-1). Upon dehydration, the BET surface area of 1 is enhanced to a value of 463 ± 36 m(2) g(-1) due to removal of coordinated water molecule. After rehydration, the compound reverts to its original form as evidenced by powder X-ray diffraction and IR spectroscopic analysis and N(2) sorption measurement. Compound 1 retains its pore structure with a variable BET surface area in several cycles of dehydration and rehydration processes indicating robustness of the framework in [Mg(Pdc)(H(2)O)](n) (1). Compound 1 catalyzes the aldol condensation reactions of various aromatic aldehydes with acetone and cyclohexanone in heterogeneous conditions. Notably, the catalytic activity of the compound is enhanced upon dehydration. The catalyst can be recycled and reused several times without significant loss of activity.     

Preparation of hexagonal platy particles of nanoporous silica using hydrotalcite as morphology template

Hexagonal platy composite particles with a hydrotalcite core and a nanoporous silica shell with a thickness of ca. 100 nm were synthesized by the reaction of a Mg-Al hydrotalcite with a homogeneous aqueous solution containing tetraethoxysilane, hexadecyltrimethylammonium chloride, ammonia and methanol at 3 degrees C. The calcination of the products at 500 degrees C in air led to the composite particle with a Mg/Al mixed oxide core and a nanoporous silica shell. Hexagonal platy particles of nanoporous silica with a pore diameter of 2.3 nm and BET surface area of 700 m(2) (g of silica)(-1) were obtained by removing the Mg/Al mixed oxide core.     

Fabrication of bulk-modified carbon paste electrode containing alpha-PW12O40(3-) polyanion supported on modified silica gel: Preparation, electrochemistry and electrocatalysis

Alpha-PW(12)O(40)(3-) (PW(12)) supported on the surface of silica gel derivatized by 3-aminopropyl(triethoxy)silane (devoted briefly as SiNH(3)PW(12)) was synthesized and used as bulk modifier to fabricate a renewable three-dimensional chemically modified electrode. The electrochemical behavior of the modified electrode was characterized by cyclic voltammetry. There is an ionic bonding character between PW(12) and the surface amino groups of modified silica, which greatly improves the stability of SiNH(3)PW(12)-modified carbon paste electrode due to insolubility of silica gel in water. The SiNH(3)PW(12) bulk-modified carbon paste electrode not only maintains the electrochemical activity of PW(12), but also exhibits remarkable advantages of renewability, as well as simple preparation and inexpensive material. The modified electrode offers an excellent and stable electrocatalytic response for the reduction of IO(3)(-) and hydrogen peroxide. The SiNH(3)PW(12)-CPE is successfully applied as an electrochemical detector to monitor IO(3)(-) in flow injection analysis (FIA). The catalytic peak current was found to be linear with the IO(3)(-) concentration in the range 5x10(-6) to 1x10(-3)molL(-1). The detection limit of the proposed method was found to be 3.1x10(-6)molL(-1) for IO(3)(-) determination.     

Microporous Silica-supported Poi yoxometal ate Catalyst H3PW12O400/SiO2 with High Activity for Acetal Reaction between Benzaldehyde and Ethylene Glycol

Keggin-type polyoxometalates (POMs) whose representative is H3PW12O40(PW12) exhibits a unique combination of physical and chemical properties. They have been widely used as acid catalysts in homogeneous and heterogeneous reaction systems. However, the catalytic activity of PW12 is so limited due to its very low specific surface area (≤9 m2/g)[1] that polar molecules can only react on its surface.     

A mesoporous metal-organic framework constructed from a nanosized C3-symmetric linker and [Cu24(isophthalate)24] cuboctahedra

The mesoporous framework [Cu(3)(L)(H(2)O)(3)]·(DMF)(35)·(H(2)O)(35) (NOTT-119) shows on desolvation a BET surface area of 4118(200) m(2) g(-1), a pore volume of 2.35 cm(3) g(-1), a total H(2) uptake of 101 mg g(-1) at 60 bar, 77 K and a total CH(4) uptake of 327 mg g(-1) at 80 bar, 298 K.     

Hydrothermal synthesis of TiO2(B) nanowires with ultrahigh surface area and their fast charging and discharging properties in Li-ion batteries

We first report a facile hydrothermal route for preparing TiO(2)(B) nanowires with ultrahigh surface area, up to 210 m(2) g(-1). Due to the 1D structure, high BET surface area and shorter b-and c-axis channel across the nanowires, the obtained TiO(2)(B) nanowire was shown to be a good anode material for lithium-ion batteries, especially on the fast charging and discharging performance.     

合成大比表面γ-Mo2N的新方法

The production of high specific surface area γ-Mo₂N (up to 165 m²·g^-1, passivated) by temperature programmed reaction of MoO₃ with mixtures of N₂ and H₂ was reported. The synthetic condition of high surface area γ-Mo₂N (usually, S_BET>100 m²·g^-1) were quite difficult and the amount of starting material MoO₃ in each batch was much less than 0.5 gram. However, some synthetic conditions had been greatly improved in our experiments. The crystalline phase and specific surface area had been characterized by XRD and BET. The XRD gave some information for reaction mechanism.     

Synthesis of a conducting SiO2-carbon composite from commercial silicone grease and its conversion to paramagnetic SiO2 particles

The thermal decomposition of commercial silicone grease was carried out in a closed reactor (Swagelok) that was heated at 800 degrees C for 3 h, yielding a SiO2-carbon composite with a BET surface area of 369 m2/g. The bulk conductivity (5.72 x 10(-6) S x cm(-2)) of the SiO2-carbon composite was determined by impedance measurements. The as-prepared SiO2-carbon composite was further annealed at 500 degrees C in air for 2 h, which led to the formation of white paramagnetic silica particles (confirmed by ESR), possessing a surface area of 111 m2/g. The present synthetic technique requires unsophisticated equipment and a low-cost commercial precursor, and the reaction is carried out without a solvent, surfactant, or catalyst. The mechanism for the formation of a porous SiO2-carbon composite from the silicone grease is also presented.     

Non-interpenetrated IRMOF-8: synthesis, activation, and gas sorption

The synthesis and successful activation of IRMOF-8 (Zn(4)O(ndc)(3), ndc = naphthalene-2,6-dicarboxylate) is presented. Room temperature synthesis effectively suppresses interpenetration. Although conventional activation under reduced pressure leads to structural collapse, activation by flowing supercritical CO(2) yields a guest-free material with a BET surface area of 4461 m(2) g(-1).     

Dye-polyoxometalate composite films: self-assembly, thermal and photochemical properties

A series of dye-polyoxometalate composite films were prepared by alternately depositing cationic dye molecules and anionic polyoxometalates such as Keggin-type [BW(12)O(40)](5-) and the sandwich complex [Co(4)(H(2)O)(2)(PW(9)O(34))(2)](10-)via layer-by-layer (LbL) self-assembly method. These cationic dye molecules (MB, AA, TH, BB3, BCB and NB) are heterocyclic planar and rigid phenothiazine and phenoxazine dye molecules with different substituting groups in the side chains. The self-assembly of the films was studied by UV-vis and IR spectra. The results show that the substituting groups of dye molecules such as NH(2) and CH(2)CH(3) have influence on the self-assembly properties. The continuous and regular growth of the films was also dependent upon hydrogen bonding (NHO) formed between the amino groups of dye molecules and oxygen atoms of POMs as well as electrostatic interactions. The investigation of thermal and photochemical treatments of the composite films is also presented. The thermal stability experiments indicate that the composite films of TH with two NH(2) substitute groups and NB with more pi-conjugated system exhibit high thermal stability, whereas the sunlight irradiation results indicate that the composite films of TH have good photochemical stability.     

Metal-organic frameworks with phosphotungstate incorporated for hydrolytic cleavage of a DNA-model phosphodiester

Five phosphotungstate-incorporated metal-organic frameworks {[Eu(4)(dpdo)(9)(H(2)O)(16)PW(12)O(40)]}(PW(12)O(40))(2)·(dpdo)(3)·Cl(3) (1); {ZnNa(2)(μ-OH)(dpdo)(4)(H(2)O)(4)[PW(12)O(40)]}·3H(2)O (2); {Zn(3)(dpdo)(7)}[PW(12)O(40)](2)·3H(2)O (3); and [Ln(2)H(μ-O)(2)(dpdo)(4)(H(2)O)(2)][PW(12)O(40)]·3H(2)O (Ln = Ho for 4 and Yb for 5) (dpdo = 4,4'-bipyridine-N,N'-dioxide) have been synthesized through a one-step hydrothermal reaction and characterized by elemental analyses, infrared (IR) spectroscopy, photoluminescence, and single-crystal X-ray diffraction (XRD). The structural analyses indicate that 1-5 display diversity structure from one-dimensional (1D) to three-dimensional (3D) series of hybrids. Kinetic experiments for the hydrolytic cleavage of DNA-model phosphodiester BNPP (bis(p-nitrophenyl)phosphate) were followed spectrophotometrically for the absorbance increase at 400 nm in EPPS (4-(2-hydroxyethyl)piperazine-1-propane sulfonic acid) buffer solution, because of the formation of p-nitrophenoxide with 1-5 under conditions of pH 4.0 and 50 °C. Ultraviolet (UV) spectroscopy indicate that the cleavage of the phosphodiester bond proceeds with the pseudo-first-order rate constant in the range of 10(-7)-10(-6) s(-1), giving an inorganic phosphate and p-nitrophenol as the final products of hydrolysis. The results demonstrate that 1-5 have good catalytic activity and reusability for hydrolytic cleavage of BNPP.     

VIII(OH)[O2C-C6H4-CO2].(HO2C-C6H4-CO2H)x(DMF)y(H2O)z(or MIL-68), a new vanadocarboxylate with a large pore hybrid topology: reticular synthesis with infinite inorganic building blocks?

V(III)(OH)[O(2)C-C(6)H(4)-CO(2)].(HO(2)C-C(6)H(4)-O(2)H)(x)(DMF)(y)(H(2)O)(z) or MIL-68 was solvothermally synthesised in a non-aqueous medium. Its structure, built up from octahedral chains connected by terephthalate linkers, exhibits large hexagonal channels containing different occluded moieties. Their irreversible removal releases a specific surface area of 603(22) m(2).g(-1)(BET).     

Structures and H2 adsorption properties of porous scandium metal-organic frameworks

Two new three-dimensional Sc(III) metal-organic frameworks {[Sc(3)O(L(1))(3)(H(2)O)(3)]·Cl(0.5)(OH)(0.5)(DMF)(4)(H(2)O)(3)}(∞) (1) (H(2)L(1)=1,4-benzene-dicarboxylic acid) and {[Sc(3)O(L(2))(2)(H(2)O)(3)](OH)(H(2)O)(5)(DMF)}(∞) (2) (H(3)L(2)=1,3,5-tris(4-carboxyphenyl)benzene) have been synthesised and characterised. The structures of both 1 and 2 incorporate the trinuclear trigonal planar [Sc(3)(O)(O(2)CR)(6)] building block featuring three Sc(III) centres joined by a central μ(3)-O(2-) donor. Each Sc(III) centre is further bound by four oxygen donors from four different bridging carboxylate anions, and a molecule of water located trans to the μ(3)-O(2-) donor completes the six coordination at the metal centre. Frameworks 1 and 2 show high thermal stability with retention of crystallinity up to 350 °C. The desolvated materials 1a and 2a, in which the solvent has been removed from the pores but with water or hydroxide remaining coordinated to Sc(III), show BET surface areas based upon N(2) uptake of 634 and 1233 m(2) g(-1), respectively, and pore volumes calculated from the maximum N(2) adsorption of 0.25 cm(3) g(-1) and 0.62 cm(3) g(-1), respectively. At 20 bar and 78 K, the H(2) isotherms for desolvated 1a and 2a confirm 2.48 and 1.99 wt% total H(2) uptake, respectively. The isosteric heats of adsorption were estimated to be 5.25 and 2.59 kJ mol(-1) at zero surface coverage for 1a and 2a, respectively. Treatment of 2 with acetone followed by thermal desolvation in vacuo generated free metal coordination sites in a new material 2b. Framework 2b shows an enhanced BET surface area of 1511 m(2) g(-1) and a pore volume of 0.76 cm(3) g(-1), with improved H(2) uptake capacity and a higher heat of H(2) adsorption. At 20 bar, H(2) capacity increases from 1.99 wt% in 2a to 2.64 wt% for 2b, and the H(2) adsorption enthalpy rises markedly from 2.59 to 6.90 kJ mol(-1).     

低密度薄水铝石晶体的水热生长过程

对Al2(SO4)3-CO(NH2)2-H2O体系在[Al3＋]=0.2 mol•L－1、[CO(NH2)2]:[Al3＋]=2∶1和反应2 h的水热条件下,不同反应温度的晶体生长过程进行了研究,得到呈多孔、针状团簇体状的微米级低密度薄水铝石晶体.采用ICP-AES、XRD、FT-IR、SEM、BET和粒径分布等手段对反应液和产物进行了分析和表征.结果表明,140 ℃时氢氧化铝凝胶或无定形粉体的析出已大部分完成,温度升高到180 ℃后,产物的结晶度变好,堆密度从117.2 kg•m－3相应增加到158.2 kg•m－3,比表面也从75.3 m2•g－1增加到88.3 m2•g－1,但平均粒径有所下降.晶体前驱体在550 ℃焙烧2 h后完全转化为形貌相似并且比表面增加的γ-Al2O3.     

快速沉淀法制备多孔纳米NiO及其电容性质研究

本文提出一种简单、低成本和无污染的快速沉淀法, 在没有添加任何有机试剂的条件下, 制备了高比表面积并具有良好孔径分布的Ni(OH)2, 于300 ℃下焙烧得到了多孔纳米NiO, 它在2.0 mol/L KOH电解液中的单电极比容量约为255 F/g.     

Fabrication and characterization of mesoporous Co3O4 core/mesoporous silica shell nanocomposites

A mesoporous Co(3)O(4) core/mesoporous silica shell composite with a variable shell thickness of 10-35 nm was fabricated by depositing silica on Co(3)O(4) superlatticed particles. The Brunauer-Emmett-Teller (BET) surface area of the composite with a shell thickness of ca. 2.0 nm was 238.6 m(2)/g, which varied with the shell thickness, and the most frequent pore size of the shell was ca. 2.0 nm. After the shell was eroded with hydrofluoric acid, mesoporous Co(3)O(4) particles with a pore size of ca. 8.7 nm could be obtained, whose BET surface area was 86.4 m(2)/g. It is proposed that in the formation of the composite the electropositive cetyltrimethylammonium bromide (CTAB) micelles were first adsorbed on the electronegative Co(3)O(4) particle surface, which directed the formation of the mesoporous silica on the Co(3)O(4) particle surface. Electrochemical measurements showed that the core/shell composites exhibited a higher discharge capacity compared with that of the bare Co(3)O(4) particles.     

Three-dimensional low symmetry mesoporous silica structures templated from tetra-headgroup rigid bolaform quaternary ammonium surfactant

Two kinds of highly ordered mesoporous silica materials (FDU-11, FDU-13) with novel three-dimensional (3-D) tetragonal and orthorhombic structures were synthesized by using tetra-headgroup rigid bolaform quaternary ammonium surfactant [(CH(3))(3)NCH(2)CH(2)CH(2)N(CH(3))(2)CH(2)(CH(2))(11)OC(6)H(4)C(6)H(4)O(CH(2))(11)CH(2)N(CH(3))(2)CH(2)CH(2)CH(2)N(CH(3))(3).4Br] (C(3-12-12)(-)(3)) as a template under alkaline conditions. High-resolution transmission electron microscopy (HRTEM), small-angle X-ray scattering (SAXS), and X-ray diffraction (XRD) show that mesoporous silica FDU-11 has primitive tetragonal P4/mmm structure with cell parameters a = b = 8.46 nm, c = 5.22 nm, and c/a ratio = 0.617. N(2) sorption isotherms show that calcined FDU-11 has a high BET surface area of approximately 1490 m(2)/g, a uniform pore size of approximately 2.72 nm, and a pore volume of approximately 1.88 cm(3)/g. Mesoporous silica FDU-13 has primitive orthorhombic Pmmm structure. The cell parameters are a = 9.81, b = 5.67, and c = 3.66 nm. N(2) sorption isotherms show that calcined FDU-13 has a high BET surface area of 1210 m(2)/g, a uniform mesopore size of approximately 1.76 nm, and a large pore volume of approximately 1.83 cm(3)/g. Such low symmetries for 3-D mesostructures (tetragonal and orthorhombic system) have not been observed before even in amphiphilic liquid crystals, which maybe resulted from an oblate aggregation of the bolaform surfactant and its strong electrostatic interaction with inorganic precursor. A probable mechanism has been proposed for the formation of such a 3-D low symmetrical mesostructure. These results will further extend the synthesis of mesoporous materials and may open up new opportunities for their new applications in catalysis, separation, and nanoscience.     

Highly porous and robust scandium-based metal-organic frameworks for hydrogen storage

The metal-organic frameworks NOTT-400 and NOTT-401, based on a binuclear [Sc(2)(μ(2)-OH)(O(2)CR)(4)] building block, have been synthesised and characterised; the desolvated framework NOTT-401a shows a BET surface area of 1514 m(2) g(-1) with a total H(2) uptake of 4.44 wt% at 77 K and 20 bar.