Synthesis and structures of the 2-(dimethylsila)pyrimidine derivatives (Ar = Ph, C6H4Bu-4; X = H, SiMe3, Li(hmpa)2, K(thf)3; n = 1, 2)

Five crystalline 2-(dimethylsila)pyrimidine derivatives (Z) have been prepared in excellent 1–4 or satisfactory 5 yield and characterised. The source of each was ultimately Li[CH(SiMe₂R)(SiMe₂OMe)] [R = Me (B) or OMe (I)]. Compound 1 (Z with Ar = Ph, X = SiMe₃, n = 1) was obtained from Z [with Ar = Ph, X = Li(OEt₂), n = 4; previously isolated from B [P.B. Hitchcock, M.F. Lappert, X.-H. Wei, J. Organomet. Chem. 689 (2004) 1342]] and Me₃SiCl. The potassium salt 2 [Z with Ar = C₆H₄Bu^t-4; X = K(thf)₃, n = 2] was made from K[CH(SiMe₃)(SiMe₂OMe)] (C) (via B) and 4-Bu^tC₆H₄CN. Treatment of 2 with 1,2-dibromoethane afforded 3 (Z with Ar = 4-Bu^tC₆H₄; X = H, n = 1); which when reacted with successively n-butyllithium and Me₃SiCl produced 4 (Z with Ar = 4-Bu^tC₆H₄, X = SiMe₃, n = 1). Compound 5 [Z with Ar = 4-Bu^tC₆H₄, X = Li(hmpa)₂, n = 1] resulted from I with 4-Bu^tC₆H₄CN and then OP(NMe₂)₃ (≡ hmpa). Plausible reaction pathways from the appropriate alkali metal alkyl C or I to 2 or 5, respectively, are suggested; these involve regiospecific 1,3-migrations of SiMe₂OMe from C → N and electrocyclic loss of Me₃SiOMe or SiMe₂(OMe)₂, respectively. The X-ray structures of crystalline 1, 2 and 5 are presented.     

Structure of the CuCl2 adduct of trans-chloro-1,4-bis(p-methoxyphenyl)-1,4-diaza-3-methylbutadien-2-yl-bis(triphenylphosphine) -palladium(II)

An X-ray structure analysis of binuclear complex [CuCl₂{RN---C(Me)C(R′)---NR}] (R = p-C₆H₄OMe; R′ = trans-PdCl(PPh₃)₂) has shown that the Pd---C σ-bonded 1,4-diaza-3-methylbutadien-2-yl-group acts as σ,σ-N,N chelating ligand witha tetragonally distorted tetrahedral geometry around the copper atom. No exchange of ancillary ligands has occured between the two metallic centers of the molecule, which are 4.75 » apart from each other.     

Reactions of tungsten and molybdenum propargyl complexes with Co2(CO)8, Co4(CO)12, and Cp2Mo2(CO)4. A crossover study of formation of (CO)3 Cp(CO)2

The nature of the protonation reaction of (

Full-size image (1K)

o(CO)₃ (M = Mo, W; R = Me, Ph, p-MeC₆H₄) (2) (obtained from (CO)₃CpMCH₂CCR (1) and Co₂(CO)₈) to give (CO)₃ Cp(CO)₂ (3) was further investigated by a crossover experiment. Thus, reaction of an equimolar mixture of 2b (M = W, Cp = η⁵-C₅H₅, R = Ph) and 2e (M = W, Cp = η⁵-C₅H₄Me; R = p-MeC₆H₄) with CF₃COOH affords only 3b (same M, Cp, and R as 2b) and 3e (same M, Cp, and R as 2e) to show an intramolecular nature of this transformation. Reaction of (CO)₃CpWCH₂CCPh (1b) with Co₄(CO)₁₂ was also examined and found to yield 2b exclusively. Treatment of 1 with Cp₂Mo₂(CO)₄ at 0–5°C provides thermally sensitive compounds, possibly (CO)₂Cp

Full-size image (1K)

oCp(CO)₂ (5), which decompose at room temperature to give Cp₂Mo₂(CO)₆ as the only isolated product.     

Preparation and reactivity of the new cyclopentadienyl-bridged complex (Me2SiCH2CH2SiMe2)(C5H4Fe(CO)2)2

A new metal-metal bonded binuclear iron system [Me₂SiCH₂CH₂SiMe₂][η⁵-C₅H₄Fe(CO)₂]₂ (2) has been prepared by treating two equivalents of NaCp with one equivalent of ClSi(Me)₂CH₂CH₂SiClMe₂ obtaining the intermediate (C₅H₅)Si(Me)₂CH₂CH₂Si(Me)₂(C₅H₅) which then is directly allowed to react with Fe(CO)₅ given 2 in 30% yield. From this cyclopentadienyldisilyl linked system three new binuclear irom complexes are formed. Treatment of 2 with Na/Hg in THF produced the dianion [Me₂SiCH₂CH₂SiMe₂][η⁵-C₅H₄Fe(CO)₂^?]₂ which is quenched with CH₃I giving [Me₂SiCH₂CH₂SiMe₂][η⁵-C₄H₄Fe(CO)₂CH₃]₂ (4) in 76% yield. Complex 2 is oxidized with 1.2 equivalent of I₂ to give [Me₂SiCH₂CH₂SiMe₂][η⁵-C₅H₄Fe(CO)₂I]₂ (5) in 85% yield. Photolysis of 5 (1 equiv.) and PPh₃ (3 equiv.) results in the formation of the bis-substituted compound [Me₂SiCH₂CH₂SiMe₂][η⁵-C₅H₄Fe(CO)(PPh₃)I]₂ (6). These four new binuclear iron complexes are characterized by ¹H, ¹³C, and ³¹P NMR and IR spectroscopy.     

Structural and energetic aspects of hydrogen bonding and proton transfer to ReH2(CO)(NO)(PR3)2 and ReHCl(CO)(NO)(PMe3)2 by IR and X-ray studies

The interaction of rhenium hydrides ReHX(CO)(NO)(PR₃)₂ 1 (X=H, R=Me (a), Et (b), iPr (c); X=Cl, R=Me (d)) with a series of proton donors (indole, phenols, fluorinated alcohols, trifluoroacetic acid) was studied by variable temperature IR spectroscopy. The conditions governing the hydrogen bonding ReHHX in solution and in the solid state (IR, X-ray) were elucidated. Spectroscopic and thermodynamic characteristics (−ΔH=2.3–6.1 kcal mol⁻¹) of these hydrogen bonded complexes were obtained. IR spectral evidence that hydrogen bonding with hydride atom precedes proton transfer and the dihydrogen complex formation was found. Hydrogen bonded complex of ReH₂(CO)(NO)(PMe₃)₂ with indole (2a–indole) and organyloxy-complex ReH(OC₆H₄NO₂)(CO)(NO)(PMe₃)₂ (5a) were characterized by single-crystal X-ray diffraction. A short NHHRe (1.79(5) Å) distance was found in the 2a–indole complex, where the indole molecule lies in the plane of the Re(NO)(CO) fragment (with dihedral angle between the planes 0.01°).     

Synthesis and crystal structures of organometallic compounds containing the ligands C(SiMe3)2(SiMe2H) and C(SiMe2Ph)2(SiMe2H)

Metallation of (HMe₂Si)(Me₃Si)₂CH (1) by LiMe gave the organolithium compound Li(THF)₂C(SiMe₃)₂(SiMe₂H) (2a), which exists in toluene solution as a mixture of covalent species and ion pairs [Li(THF)₄][Li{C(SiMe₃)₂(SiMe₂H)}₂] (2b). Treatment of a mixture of 1 and LiMe with KOBu^t gave KC(SiMe₃)₂(SiMe₂H) (3). This reacted with AlMe₂Cl in hexane/THF to give Al(THF)Me₂{C(SiMe₃)₂(Si Me₂H)} (4). Treatment of (HMe₂Si)(PhMe₂Si)₂CH (5) with LiMe in Et₂O/THF gave the THF adduct [Li(THF)₂C(SiMe₂Ph)₂(SiMe₂H)] (6); in the presence of KOBu^t the solvent-free [K][C(SiMe₂Ph)₂(SiMe₂H)] (7) was obtained. Crystal structure determinations showed that 6 crystallizes in a molecular lattice and 7 in an ionic lattice in which the coordination sphere of the potassium comprises phenyl groups and hydrogen atoms attached to silicon, as well as the central carbon of the bulky carbanion. Compound 7 reacted with an excess of AlMe₂Cl to give [AlClMe{C(SiMe₂Ph)₂(SiMe₂H)}]₂ (8) and AlMe₃. A small amount of the methoxo derivative [Al(OMe)Me{C(SiMe₂Ph)₂(SiMe₂H)}]₂ (9) was obtained as a byproduct, presumably after the accidental admission of traces of air. X-ray structural determinations showed that 8 forms halogen-bridged dimers, with the bulky ligands in the anti-configuration, and 9 forms methoxo-bridged species in which the bulky ligands are syn.     

Synthesis and reaction chemistry of 4-nitrile-substituted NCN-pincer palladium(II) and platinum(II) complexes (NCN = [NC-4-C6H2(CH2NMe2)2-2,6])

Nitrile-functionalized NCN-pincer complexes of type [MBr(NC-4-C₆H₂(CH₂NMe₂)₂-2,6)] (6a, M = Pd; 6b, M = Pt) (NCN = [C₆H₂(CH₂NMe₂)₂-2,6]⁻) are accessible by the reaction of Br-1-NC-4-C₆H₂(CH₂NMe₂)₂-2,6 (2b) with [Pd₂(dba)₃ · CHCl₃] (5a) (dba = dibenzylidene acetone) and [Pt(tol-4)₂(SEt₂)]₂ (5b) (tol = tolyl), respectively. Complex 6b could successfully be converted to the linear coordination polymer {[Pt(NC-4-C₆H₂(CH₂NMe₂)₂-2,6)](ClO₄)}_n (8) upon its reaction with the organometallic heterobimetallic π-tweezer compound {[Ti](μ-σ,π-CCSiMe₃)₂}AgOClO₃ (7) ([Ti] = (η⁵-C₅H₄SiMe₃)₂Ti).The structures of 6a (M = Pd) and 6b (M = Pt) in the solid state are reported. In both complexes the d⁸-configurated transition metal ions palladium(II) and platinum(II) possess a somewhat distorted square-planar coordination sphere. Coordination number 4 at the group-10 metal atoms M is reached by the coordination of two ortho-substituents Me₂NCH₂, the NCN ipso-carbon atom and the bromide ligand. The NC group is para-positioned with respect to M.     

Lithiated γ-O-functionalized propyl phenyl sulfides and sulfones of the type Li[CH(SOxPh)CH2CH2OR] (x = 0, 2). [Li{CH(SPh)CH2CH2Ot-Bu}(tmeda)] – A structurally characterized organolithium inner complex

Lithiation of O-functionalized alkyl phenyl sulfides PhSCH₂CH₂CH₂OR (R = Me, 1a; i-Pr, 1b; t-Bu, 1c; CPh₃, 1d) with n-BuLi/tmeda in n-pentane resulted in the formation of α- and ortho-lithiated compounds [Li{CH(SPh)CH₂CH₂OR}(tmeda)] (α-2a–d) and [Li{o-C₆H₄SCH₂CH₂CH₂OR)(tmeda)] (o-2a–d), respectively, which has been proved by subsequent reaction with n-Bu₃SnCl yielding the requisite stannylated γ-OR-functionalized propyl phenyl sulfides n-Bu₃SnCH(SPh)CH₂CH₂OR (α-3a–d) and n-Bu₃Sn(o-C₆H₄SCH₂CH₂CH₂OR) (o-3a–d). The α/ortho ratios were found to be dependent on the sterical demand of the substituent R. Stannylated alkyl phenyl sulfides α-3a–c were found to react with n-BuLi/tmeda and n-BuLi yielding the pure α-lithiated compounds α-2a–c and [Li{CH(SPh)CH₂CH₂OR}] (α-4a–b), respectively, as white to yellowish powders. Single-crystal X-ray diffraction analysis of [Li{CH(SPh)CH₂CH₂Ot-Bu}(tmeda)] (α-2c) exhibited a distorted tetrahedral coordination of lithium having a chelating tmeda ligand and a C,O coordinated organyl ligand. Thus, α-2c is a typical organolithium inner complex.Lithiation of O-functionalized alkyl phenyl sulfones PhSO₂CH₂CH₂CH₂OR (R = Me, 5a; i-Pr, 5b; CPh₃, 5c) with n-BuLi resulted in the exclusive formation of the α-lithiated products Li[CH(SO₂Ph)CH₂CH₂OR] (6a–c) that were found to react with n-Bu₃SnCl yielding the requisite α-stannylated compounds n-Bu₃SnCH(SO₂Ph)CH₂CH₂OR (7a–c). The identities of all lithium and tin compounds have been unambiguously proved by NMR spectroscopy (¹H, ¹³C, ¹¹⁹Sn).     

Transition metal chemistry of phosphorus based ligands. Ruthenium(II) chemistry of bis(phosphino)amines, X2PN(R)PX2 (R=H or Ph, X=Ph; R=Ph, X2=O2C6H4)

Reactions of CpRuCl(PPh₃)₂ with bis(phosphino)amines, X₂PN(R)PX₂ (1 R=H, X=Ph; 2 R=X=Ph; 3 R=Ph, X₂=O₂C₆H₄) give neutral or cationic mononuclear complexes depending on the reaction conditions. Reaction of 1 with CpRuCl(PPh₃)₂ gives one neutral complex, [CpRu(Cl)(η²-Ph₂PN(H)PPh₂)] (4) and two cationic complexes, [CpRu(η²-Ph₂PN(H)PPh₂)(η¹-Ph₂PN(H)PPh₂)]Cl (5) and [CpRu(PPh₃)(η²-Ph₂PN(H)PPh₂)]Cl (6), whereas the reaction of 2 with CpRuCl(PPh₃)₂ leads only to the isolation of cationic complex, [CpRu(PPh₃)(η²-Ph₂PN(Ph)PPh₂)]Cl (7). The catechol derivative 3, in a similar reaction, affords an interesting mononuclear complex [CpRu(PPh₃){η¹-(C₆H₄O₂)PN(Ph)P(O₂H₄C₆)}₂]Cl (8) containing two monodentate bis(phosphino)amine ligands. The structural elucidation of the complexes was carried out by elemental analyses, IR and NMR spectroscopic data.     

Synthesis and structures of crystalline lithium 1-azaallyls and a 1,3-diazaallyl derived from Li{CH(SiMe3)(SiMe3−n(OMe)n)} (n=1 or 2) and Li{CH(SiMe2OMe)2} and RCN (R=Bu, Ph, 2,5-Me2C6H3, or Ad)

Crystalline [Li{N(SiMe₂OMe)C(^tBu)C(H)(SiMe₃)}]₂ (5), [Li{N(SiMe₂OMe)C(Ph)C(H)(SiMe₃)}]₂ (6), [C(C₆H₃Me₂-2,5)C(H)(SiMe₃)}(TMEDA)](7), [Li{N(SiMe(OMe)₂)C(^tBu)C(H)(SiMe₃)}(THF)]₂ (8), Li{N(SiMe(OMe)₂)C(Ph)C(H)(SiMe₃)}(TMEDA) (9) and [Li{N(SiMe₂OMe)C(^tBu)C(H)(SiMe₂OMe)}]₂ (10) were readily obtained at ambient temperature from (i) [Li{CH(SiMe₃)(SiMe₂OMe)}]₈ (1) and an equivalent portion of RCN (R=^tBu (5), Ph (6) or 2,5-Me₂C₆H₃ (7)); (ii) [Li{CH(SiMe₃)(SiMe(OMe)₂)}]_∞ (2) and an equivalent portion of ^tBuCN (8) or PhCN (9); and (iii) [Li{CH(SiMe₂OMe)₂}]_∞ (3) and one equivalent of ^tBuCN (10). Reactions (i) and (ii) were regiospecific with SiMe_3−n(OMe)_n>SiMe₃ in 1,3-migration from C (in 1 or 2)→N. The 1-azaallyl ligand was bound to the lithium atom as a terminally bound κ¹-enamide (8 and 10), a bridging η³-1-azaallyl (6), or a bridging κ¹-enamide (5). The stereochemistry about the CC bond was Z for 5, 8 and 10 and E for 7. X-ray data are provided for 5, 6, 7, 8 and 10 and multinuclear NMR spectra data in C₆D₆ or C₆D₅CD₃ for each of 5-10.     

Synthesis and reactivity of neodymium(III) amido-tethered N-heterocyclic carbene complexes

The reaction of the heteroleptic Nd(III) iodide, [Nd(L′)(N″)(μ-I)] with the potassium salts of primary aryl amides [KN(H)Ar′] or [KN(H)Ar^*] affords heteroleptic, structurally characterised, low-coordinate neodymium amides [Nd(L′)(N″)(N(H)Ar′)] and [Nd(L′)(N″)(N(H)Ar^*)] cleanly (L′ = t-BuNCH₂CH₂[C{NC(SiMe₃)CHNt-Bu}], N″ = N(SiMe₃)₂, Ar′ = 2,6-Dipp₂C₆H₃, Dipp = 2,6-Prⁱ₂C₆H₃, Ar^* = 2,6-(2,4,6-Prⁱ₃C₆H₂)₂C₆H₃). The potassium terphenyl primary amide [KN(H)Ar^*] is readily prepared and isolated, and structurally characterised. Treatment of these primary amide-containing compounds with alkali metal alkyl salts results in ligand exchange to give alkali metal primary amides and intractable heteroleptic Nd(III) alkyl compounds of the form [Nd(L′)(N″)(R)] (R = CH₂SiMe₃, Me). Attempted deprotonation of the Nd-bound primary amide in [Nd(L′)(N″)(N(H)Ar^*)] with the less nucleophilic phosphazene superbase Bu^tNP{NP(NMe₂)₃}₃ resulted in indiscriminate deprotonations of peripheral ligand CH groups.     

Novel sandwich complexes of zirconium [C9H5(SiMe3)2](C5Me4R)ZrCl2 (R = CH3, CH2CH2NMe2): Synthesis and reduction behavior

Novel half-sandwich [C₉H₅(SiMe₃)₂]ZrCl₃ (3) and sandwich [C₉H₅(SiMe₃)₂](C₅Me₄R)ZrCl₂ (R = CH₃ (1), CH₂CH₂NMe₂ (2)) complexes were prepared and characterized. The reduction of 2 by Mg in THF lead to (η⁵-C₉H₅(SiMe₃)₂)[η⁵:η²(C,N)-C₅Me₄CH₂CH₂N(Me)CH₂]ZrH (7). The structure of 7 was proved by NMR spectroscopy data. Hydrolysis of 2 resulted in the binuclear complex ([C₅Me₄CH₂CH₂NMe₂]ZrCl₂)₂O (6). The crystal structures of 1 and 6 were established by X-ray diffraction analysis.     

Steric and electronic effects in stabilizing allyl-palladium complexes of “P-N-P” ligands, X2PN(Me)PX2 (X = OC6H5 or OC6H3Me2-2,6)

The chemistry of η³-allyl palladium complexes of the diphosphazane ligands, X₂PN(Me)PX₂ [X = OC₆H₅ (1) or OC₆H₃Me₂-2,6 (2)] has been investigated.The reactions of the phenoxy derivative, (PhO)₂PN(Me)P(OPh)₂ with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = H or Me; R′ = H, R″ = Me) give exclusively the palladium dimer, [Pd₂{μ-(PhO)₂PN(Me)P(OPh)₂}₂Cl₂] (3); however, the analogous reaction with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = Ph) gives the palladium dimer and the allyl palladium complex [Pd(η³-1,3-R′,R″-C₃H₃)(1)](PF₆) (R′ = R″ = Ph) (4). On the other hand, the 2,6-dimethylphenoxy substituted derivative 2 reacts with (allyl) palladium chloro dimers to give stable allyl palladium complexes, [Pd(η³-1,3-R′,R″-C₃H₃)(2)](PF₆) [R′ = R″ = H (5), Me (7) or Ph (8); R′ = H, R″ = Me (6)].Detailed NMR studies reveal that the complexes 6 and 7 exist as a mixture of isomers in solution; the relatively less favourable isomer, anti-[Pd(η³-1-Me-C₃H₄)(2)](PF₆) (6b) and syn/anti-[Pd(η³-1,3-Me₂-C₃H₃)(2)](PF₆) (7b) are present to the extent of 25% and 40%, respectively. This result can be explained on the basis of the steric congestion around the donor phosphorus atoms in 2. The structures of four complexes (4, 5, 7a and 8) have been determined by X-ray crystallography; only one isomer is observed in the solid state in each case.     

Iminophosphines: synthesis, formation of 2,3-dihydro-1H-benzo[1,3]azaphosphol-3-ium salts and N-(pyridin-2-yl)-2-diphenylphosphinoylaniline, coordination chemistry and applications in platinum group catalyzed Suzuki coupling reactions and hydrosilylations

The aprotic and protic bi- and multidentate iminophosphines 2-Ph₂PC₆H₄N=CR¹R² (R¹=H, R²=Ph=2a; R¹=Me R²=Ph=2b; R¹=H, R²=2-thienyl=2c; R¹=H, R²=C₆H₄-2-PPh₂=2d; R¹=H, R²=C₆H₄-2-OH=2e, R¹=H, R²=C₆H₄-2-OH-3-Bu^t=2f; R¹=H, R²=CH₂C(O)Me=2g) have been prepared by the acid catalyzed condensation of 2-(diphenylphosphino)aniline with the corresponding aldehyde–ketone. Iminophosphine 2d can be reduced with sodium cyanoborohydride to give the corresponding amino-diphosphine 2-Ph₂PC₆H₄N(H)CH₂C₆H₄-2-PPh₂ (2h). In the presence of a stoichiometric quantity of acid, 2-(diphenylphosphino)aniline reacts in an unexpected manner with benzaldehyde, salicylaldehyde, or acetophenone to give the corresponding 2,3-dihydro-1H-benzo[1,3]azaphosphol-3-ium salts and with pyridine-2-carboxaldehyde to give N-(pyridin-2-ylmethyl)-2-diphenylphosphinoylaniline, the latter of which has been characterized by single-crystal X-ray crystallography, as its palladium dichloride derivative. The attempted condensation of 2-(diphenylphosphino)aniline with pyridine-2-carboxaldehyde to give the corresponding pyridine-functionalized iminophosphine resulted in an unusual transformation involving the diastereoselective addition of two equivalents of aldehyde to give 1,2-dipyridin-2-yl-2-(o-diphenylphosphinoyl)phenylamino-ethanol, which has been characterized by a single-crystal X-ray structure determination. The bidentate iminophosphine 2-Ph₂PC₆H₄N=C(H)Ph reacts with [(cycloocta-1,5-diene)PdClX] X=Cl, Me) to give [Pd{2-Ph₂PC₆H₄N=C(H)Ph}ClX] and the imino-diphosphine 2-Ph₂PC₆H₄N=C(H)C₆H₄-PPh₂ reacts with [(cycloocta-1,5-diene)PdClMe] to give [Pd{2-Ph₂PC₆H₄N=C(H)C₆H₄---PPh₂}ClMe] and each has been characterized by single-crystal X-ray crystallography. The monobasic iminophosphine 2-Ph₂PC₆H₄N=C(Me)CH₂C(O)Me reacts with [Ni(PPh₃)₂Cl₂] in the presence of NaH to give the phosphino–ketoiminate complex [Ni{2-Ph₂PC₆H₄N=C(Me)CHC(O)Me}Cl], which has been structurally characterized. Mixtures of iminophosphines 2a–h and a palladium source catalyze the Suzuki cross coupling of 4-bromoacetophenone with phenyl boronic acid. The efficiency of these catalysts show a marked dependence on the palladium source, catalysts formed from [Pd₂(OAc)₆] giving consistently higher conversions than those formed from [Pd₂(dba)₃] and [PdCl₂(MeCN)₂]. Catalysts formed from neutral bi- and terdentate iminophosphines 2a–d gave significantly higher conversions than those formed from their monobasic counterparts 2e–f. Notably, under our conditions the conversions obtained with 2a–c compare favorably with those of the standards; catalysts formed from tris(2-tolyl)phosphine and tris(2,4-di-tert-butylphenyl)phosphite and a source of palladium. In addition, mixtures of [Ir(COD)Cl]₂ and 2a–h are active for the hydrosilylation of acetophenone; in this case catalysts formed from monobasic iminophosphines 2e–f giving the highest conversions.     

Experimental and theoretical studies on group 1 metallacarboranes: Synthesis, structure and ab initio calculations of the NMR chemical shifts of the 1-(THF)-1-(TMEDA)-1-Na-2,4-(SiMe3)2-2,4-C2B4H5 and related carboranes

The reaction of gaseous HCl with either the disodium or dilithium compound of the [nido-2,4-(SiMe₃)₂-2,4-C₂B₄H₄]²⁻ dianion (I) in 1:1 stoichiometry in THF produced the monoprotonated species 1-Na(THF)₂-2,4-(SiMe₃)₂-2,4-C₂B₄H₅ (II) or 1-Li(THF)₂-2,4-(SiMe₃)₂-2,4-C₂B₄H₅ (III), in 81% and 80% yields, respectively. This method proved superior to that involving the direct reduction of the closo-C₂B₄ carborane by metal hydrides. II and III were characterized by elemental analysis, ¹H, ¹¹B and ¹³C NMR and IR spectra. Compound II was recrystallized from a mixture THF, hexane and TMEDA (1:2:1) to isolate colorless crystals of the mixed solvated species, 1-(THF)-1-(TMEDA)-1-Na-2,4-(SiMe₃)₂-2,4-C₂B₄H₅ (IV), which were subsequently used for X-ray diffraction studies. The structure of IV showed that the capping metal occupied the apical position above the open C₂B₃ face of the carborane and that a hydrogen atom was bridging the two adjacent boron atoms on that face. The ¹¹B and ¹³C NMR spectra calculated by GIAO (gauge independent atomic orbital) methods at the 6-311G^** level on the B3LYP/6-31G^* optimized geometries of I–III, and a number of related nido- and closo-carboranes, gave excellent agreement with experiment, even in compounds where electron correlation effects are known to be important.     

Group 12 metal aryl selenolates. Crystal and molecular structure of [2-(Et2NCH2)C6H4]2Se2 and [2-(Me2NCH2)C6H4Se]2M (M = Zn, Cd)

Diorganodiselenide [2-(Et₂NCH₂)C₆H₄]₂Se₂ (1) was obtained by hydrolysis/oxidation of the corresponding [2-(Et₂NCH₂)C₆H₄]SeLi derivative. The treatment of [2-(Et₂NCH₂)C₆H₄]₂Se₂ with elemental sodium in THF resulted in [2-(Et₂NCH₂)C₆H₄]SeNa (2). Reactions between alkali metal selenolates [2-(R₂NCH₂)C₆H₄]SeM′ (R = Me, Et; M′ = Li, Na) and MCl₂ (M = Zn, Cd) in a 2:1 molar ratio resulted in the [2-(R₂NCH₂)C₆H₄Se]₂M species [R = Me, M = Zn (3), Cd (4); R = Et, M = Zn (5), Cd (6)]. The new compounds were characterized by multinuclear NMR (¹H, ¹³C, ⁷⁷Se, ¹¹³Cd) and mass spectrometry. The crystal and molecular structures of 1, 3 and 4 revealed monomeric species stabilized by N → Se (for 1) and N → M (for 3 and 4) intramolecular interactions.     

Übergangsmetall-substituierte acylphosphane und phosphaalkene : XX. Dipolare [3 + 2]-Cycloadditionen eines acetylendicarbonsäureesters an die metallophosphaalkene (η-C5Me5)(CO)2Fe---P=C(R)SiMe3 (R = Ph, SiMe3)

The metallo-phosphaalkenes (η⁵-C₅Me₅)(CO)₂FeP=C(R)(SiMe₃) (Ia: R = SiMe₃, Ib: R = Ph) and MeO₂C---CC---CO₂Me undergo a dipolar [3+2]-cycloaddition to afford the metallo-heterocycles [(η⁵-C₅Me₅)(CO)

Full-size image

=C(R)SiMe₃] (IIIa,b) with exocyclic P=C double bonds.     

Alcohol adducts of zinc dichloride: Molecular structure of [ZnCl2(THF){1-HOC(C6H11)2-2-NMe2C6H4}]

The aminoalcohols 1-HOCR₂-2-NMe₂C₆H₄ [R = Ph (1), R = C₆H₁₁ (2)] and 1-HOCPh₂CH₂-2-NMe₂C₆H₄ (3) react with ZnCl₂ in tetrahydrofuran to give the alcohol adducts [ZnCl₂(THF){1-HOCR₂-2-NMe₂C₆H₄}] [R = Ph (4), R = C₆H₁₁ (5)] and [ZnCl₂(THF){1-HOCPh₂CH₂-2-NMe₂C₆H₄}] (6). The complexes 4–6 were characterized by ¹H and ¹³C NMR spectroscopy, and 5 was also structurally characterized by X-ray crystallography.     

Synthesis and structure of the heterotrinuclear chromium-palladium clusters (RC5H4CrCl)2-(μ3S)(μ-SCMe3)2Pd(PPh3) with ferromagnetic exchange interactions over the CrSCr system

Reactions of (RC₅H₄)₂Cr₂(SCMe₃)₂S(I, R = H; II, R = Me) with (PPh₃)₂PdCl₂ in benzene at 20°C gives trinuclear complexes (RC₅H₄)₂Cr₂Cl₂(μ₃-S)(μ-SCMe₃)₂Pd(PPh₃)(III, R = H; IV, R = Me). The structure of IV as a monobenzene solvate is established by an X-ray analysis (black-green triclinic crystals space group P$\text{1}$ with a = 11.403(4), b = 14.933(5), c = 14.131(5) Å, α = 99.13(3), β = 112.72(3), γ = 95.65(3)°, V = 2201.6 Å, Z = 2; IV·C₆H₆). The structure was solved by direct methods and refined in an anisotropic approximation to R = 0.046, R_w = 0.058 for 7643 reflections with I ? 2σ(I). In the molecule of IV metal atoms are separated by non-bonding distances (Cr … Cr 4.079(I), Cr … Pd 3.230(I) and 3.380(I) Å) but linked by the bridging tridentate sulphur atom (CrS 2.339(2) and 2.329(2), PdS 2.327(2) Å), and two SCMe₃ groups between Pd and Cr (CrS 2.396(2) and 2.403(2), PdS 2.350(2) and 2.381(2) Å, Cr?Pd 85.14(6) and 89.92(6)°). The Cl atoms are transferred from Pd to Cr atoms (CrCl 2.308(2) Å) and being terminally coordinated are in trans-positions to each other (as well as η-CH₃C₅H₄ rings) with respect to the Cr₂Pd plane. Cr atoms in III and IV exhibit ferromagnetic exchange interactions over the Cr?Cr system (+2J = 28 and 11 cm^?1, respectively).     

Synthesis, crystal structures and spectroscopic characterization of two neutral heterobimetallic clusters MS4Cu4(pz)6X2 (where M = Mo (1) or W (2), X = Cl (1) or disordered Cl/Br (2), and pz = 3,5-dimethylpyrazole)

The title complexes were synthesized in acetone by the reaction of [n-Bu₄N]₂[MoS₄Cu₄Cl₄] and pz^Me2 for compound 1, and n-Bu₄NBr, [NH₄]₂[WS₄], CuCl and pz^Me2 for compound 2. X-ray diffraction studies of 1 and 2 demonstrate that four of the six edges of the tetrahedral [MS₄]²⁻ core are bridged by four copper atoms, giving a pentanuclear structure MS₄Cu₄(pz^Me2)₆X₂ (M = Mo, W) with the five metal atoms essentially coplanar. The four Cu atoms exhibit two different coordination modes. Each of one pair of mutually trans Cu atoms is coordinated by two (μ₃-S) atoms and two nitrogen atoms of pz^Me2 rings, giving a distorted tetrahedral CuS₂N₂ arrangement. The other two mutually trans Cu atoms are coordinated by two (μ₃-S) atoms, one nitrogen atom of pz^Me2 and one terminal Cl or Br ligand, giving a distorted tetrahedral CuS₂NX unit. In addition to being structurally studied by X-ray diffraction, the title compounds have been characterized by IR, UV–Vis and ¹H NMR spectroscopy. The IR results, which include low-frequency M–S_b stretching bands, are consistent with the X-ray structural analysis and confirm that the [MS₄]²⁻ cores are coordinated through all four sulfur atoms in the complexes 1 and 2.