The Kinetics of the Reaction of Carbon Dioxide with Propylene Oxide Catalyzed by a Chromium–Salen Complex

The kinetics of the reaction of CO₂ with propylene oxide utilizing a salenCrCl/PPNCl active catalytic system is studied with varying reaction conditions (temperature, pressure, and cocatalyst/catalyst ratio). The reaction proceeds selectively to form cyclic propylene carbonate (PC) at [PPNCl]/[salenCrCl] ratios above two. The value of the effective activation energy of PC formation is found.     

Kinetics and Mechanism of the Oxidation of Glycol by Dihydroxyditelluratoargentate(Ⅲ) with Spectrophotometry

The kinetics of the oxidation of glycol by dihydroxyditelluratoargentate (Ⅲ) complex(DDA) was studied in alkaline medium with spectrophotometry(in a temperature range of 16.6-40 ℃).The first-order rates with respect to glycol and Ag(Ⅲ) were all found.The rates increased with the increase in [OH-] and decreased with the increase in [TeO2-4].No effect was found with the addition of KNO3 and no free radical was detected.In view of this,the dihydroxymonotelluratoargentate(Ⅲ) species(DMA) is assumed to be the active species.A plausible mechanism involving a two-electron transfer is proposed,and the rate equation derived from the mechanism can explain all experimental observations.Activation parameters of the rate-determining step and constants are evaluated.     

Determination of Antioxidants and Preservatives in Cosmetics by SPME Combined with GC–MS

A rapid and simple procedure for the determination of antioxidants and preservatives in cosmetics has been developed utilizing solid-phase microextraction combined with GC–MS. A silica fiber coated with polyacrylate provided the highest extraction efficiency. Detection limits in the range from 0.4 to 8.5 ng mL⁻¹ were obtained. Linearity is over a wide range from 1 to 2,000 ng mL⁻¹ with a relative standard deviation under 16%. Cosmetic from a local supermarket were analysed for antioxidants and preservatives to demonstrate the effectiveness of the proposed method. The concentration of antioxidants and preservatives determined was 20–1,218 μg g⁻¹ for methylparaben and 5–3,779 μg g⁻¹ for propylparaben.     

Transient and Dissipative Host–Guest Hydrogels Regulated by Consumption of a Reactive Chemical Fuel

The transient self-assembly of molecules under the direction of a consumable fuel source is fundamental to biological processes such as cellular organization and motility. Such biomolecular assemblies exist in an out-of-equilibrium state, requiring continuous consumption of high energy molecules. At the same time, the creation of bioinspired supramolecular hydrogels has traditionally focused on associations occurring at the thermodynamic equilibrium state. Here, hydrogels are prepared from cucurbit[7]uril host–guest supramolecular interactions through transient physical crosslinking driven by the consumption of a reactive chemical fuel. Upon action from this fuel, the affinity and dynamics of CB[7]–guest recognition are altered. In this way, the lifetime of transient hydrogel formation and the dynamic modulus obtained are governed by fuel consumption, rather than being directed by equilibrium complex formation.     

Determination of the Volatile Oil of Magnolia biondii Pamp by GC–MS Combined with Chemometric Techniques

An optimized temperature-programmed gas chromatography–mass spectrometry system combined with chemometric methods was firstly applied to analyze the volatile components of M. biondii Pamp. A total of 65 components were identified using similarity searches between mass spectra and MS database. This number was extended to 80 components with the help of chemometric techniques. The peak purity of two-way data was controlled by fixed size moving window evolving factor analysis, two dimensional-evolving latent projection graph and three dimensional-evolving latent projection graph. Then the overlapped peak clusters were resolved using heuristic evolving latent projection. The results prove that the reported approach is powerful for the analysis of complex herbal samples.     

Kinetics of the reaction of CF3 with O2 over the temperature range 233–373 K

The rate constant of the reaction CF₃ + O₂ + M → CF₃O₂ + M has been measured as a function of temperature in the fall-off region between 1 and 10 Torr, by laser photolysis and time-resolved mass spectrometry. The values of the fall-off parameters measured at room temperature are in good agreement with previous values and the temperature dependence of k₁₍₀₎ is reasonably well accounted for by the theoretical analysis proposed by Troe and co-workers. With M = N₂k₁₍₀₎ = (1.9 ± 0.2) × 10⁻²⁹ (T/298)^{(−4.7 ± 0.4)} cm⁶ molecule⁻² s⁻¹. Reliable values of k_1(∞) cannot be derived from these low pressure measurements. The rate expression proposed, k_1(∞) = (9 ± 2) X 10⁻¹² (T/298)^(0±1) cm³ molecule⁻¹ s⁻¹, is consistent with a “broadening parameter” of the form F_c = exp(−T/395) and previous values reported at room temperature.     

Determination of the Absolute Configuration of Super-Carbon-Chain Compounds by a Combined Chemical,Spectroscopic, and Computational Approach: Gibbosols A and B

Marine dinoflagellates produce remarkable organic molecules, particularly those with polyoxygenated long-carbon-chain backbones, namely super-carbon-chain compounds (SCCCs), characterized by the presence of numerous stereogenic carbon centers on acyclic polyol carbon chains. Even today, it is a challenge to determine the absolute configurations of these compounds. In this work, the planar structures and absolute configurations of two highly flexible SCCCs, featuring either a C₆₉- or C₇₁-linear carbon backbone, gibbosols A and B, respectively, each containing thirty-seven stereogenic carbon centers, were unambiguously established by a combined chemical, spectroscopic, and computational approach. The discovery of gibbosols A and B with two hydrophilic acyclic polyol chains represents an unprecedented class of SCCCs. A reasonable convergent strategy for the biosynthesis of these SCCCs was proposed.     

Determination of Anilines and Toluidines in Water by Salt-Assisted Dispersive Liquid–Liquid Microextraction Combined with GC-FID

Dispersive liquid–liquid microextraction (DLLME) assisted with salting-out was applied for the determination of five aromatic amines in water samples by using gas chromatography with flame ionization detection. In this extraction method, several factors influencing the extraction efficiency of the target analytes, such as extraction and disperser solvent type and their volume, salt addition and amount, and pH, were studied and optimized. Under the optimal DLLME conditions, good linearity was observed in the range of 4–1,000 ng mL^?1 with the RSDs from 1.2 to 7.9 %. The LODs based on S/N of 3 ranged from 0.2 to 3.4 ng mL^?1 and the enrichment factors ranged from 207 to 4,315. The proposed method was successfully applied to the water samples collected from the tap and the lake, and the relative recoveries were in the range of 87.7–108.4 %.     

Kinetics of Thermal Decomposition of Yttrium and Samarium Hydroxides and Sm(OH)3@Y(OH)3 Compound with a Core–Shell Nanostructure

Russian Journal of General Chemistry - The decomposition mechanisms of hydrated hydroxides of rare-earth metals Sm(OH)3·(H2O)gel·nH2O and Y(OH)3·(H2O)gel·nH2O, and also compound...     

Determination of Anilines and Toluidines in Water by Salt-Assisted Dispersive Liquid–Liquid Microextraction Combined with GC-FID

Dispersive liquid–liquid microextraction (DLLME) assisted with salting-out was applied for the determination of five aromatic amines in water samples by using gas chromatography with flame ionization detection. In this extraction method, several factors influencing the extraction efficiency of the target analytes, such as extraction and disperser solvent type and their volume, salt addition and amount, and pH, were studied and optimized. Under the optimal DLLME conditions, good linearity was observed in the range of 4–1,000 ng mL⁻¹ with the RSDs from 1.2 to 7.9 %. The LODs based on S/N of 3 ranged from 0.2 to 3.4 ng mL⁻¹ and the enrichment factors ranged from 207 to 4,315. The proposed method was successfully applied to the water samples collected from the tap and the lake, and the relative recoveries were in the range of 87.7–108.4 %.

     

Kinetics of the reactions of catechins with hypochlorite,peroxynitrite, and amino acid–derived peroxyl- radicals

Catechins, one of the class of flavonoids, are known as very efficient antioxidants. Here we investigated the kinetics of the reactions of three catechins, namely, catechin, epigallocatechin, and epigallocatechin gallate (EGCG) with some oxidants, which are formed in vivo under oxidative stress, hypochlorite, peroxynitrite, and amino acid peroxyl radicals. Stopped-flow spectrophotometry and pulse radiolysis technique with absorption detection were used to observe the formation of intermediate products of oxidized catechins. We found that catechins react with hypochlorite with the rate constant of the order of 10⁵–10⁶ M⁻¹ s⁻¹ at pH 7.4. Experimental kinetic traces of the reaction of EGCG with valine peroxyl radicals were fitted using chemical simulation, and the rate constant of this reaction was found to be 5 × 10⁵ M⁻¹ s⁻¹. The rate constants of the formation of unstable catechin quinones in the reaction with peroxynitrite were comparable to that of spontaneous peroxynitrite isomerization, which indicates that catechins are oxidized indirectly by peroxynitrite. Biological consequences of these reactions are discussed.     

Kinetics and Mechanism of 4-Nitrotoluene Oxidation with Ozone in an Acetic Acid Solution in the Presence of a Metal–Bromide Catalyst

The kinetics and mechanism of a reaction between ozone and 4-nitrotoluene in an acetic acid solution in the presence of a cobalt–bromide catalyst were studied at 100°. Under these conditions, 4-nitrobenzoic acid was the main reaction product (96.6%). The rate of oxidation exhibited a first order with respect to the substrate, ozone, and the catalyst and a zero order with respect to oxygen. The main stages of the catalytic cycle were considered. It is believed that the selective oxidation of 4-nitrotoluene at the methyl group in the presence of a catalyst occurs as a nonchain ion–radical process, in which the role of ozone is reduced to the generation of an active catalyst species (Co³⁺Br^– Co²⁺Br^·). This species involves 4-nitrotoluene in the oxidation process at a high rate.     

Investigation on the thermal decomposition and flame retardancy of wood treated with a series of molybdates by TG–MS

A flame-retardant wood was prepared using a series of insoluble molybdates through the double bath technique. The flame retardancy of the wood samples was studied with the limiting oxygen index (LOI) method. The relationships between the flame-retardant performance and the thermal property of wood were studied by the thermogravimetry (TG), derivative thermogravimetry (DTG), differential thermal analysis (DTA), scanning electron microscopy (SEM), and the thermogravimetry–mass spectrometry (TG–MS) analysis methods. The results showed that the insoluble molybdates, which were precipitated into the wood by the double bath technique, can obviously improve the flame retardancy of wood. Similarly, the transition metal molybdates showed higher flame-retardant efficiency than the main group metal molybdates do, which probably due to the thermal barrier effect that Fe₂(MoO₄)₃ acts during the combustion of the samples. At the same time, Fe₂(MoO₄)₃ catalyzed the dehydration and carbonization reactions of wood, and caused an increase in the amount of char produced, and an improvement of the stability of the char residue. Moreover, the mass spectrometry results indicated that the excess transition metal ions speed up the deep decomposition of the char residue, and resulting in the smoldering of wood.     

Immobilization of Optically Active Olefins on the Silica Surface by Combined Hydrosilylation and Sol–gel Technology

By means of hydrosilylation reactions between functional olefins and triethoxysilane in the presence of Speier's catalyst and sol-gel transformations of the reaction products, a number of optically active and complexing alkenes (quinine, quinidine, cinchonine, cinchonidine, alprenolol, N-allylrhodanine and hemin) were immobilized on the surface of silica. The structures of the compounds formed and the nature of their bonding with the surface were studied by DRIFT and NMR spectroscopies. The concentrations of olefins anchored to the surface layer of the silica matrix were estimated by UV spectroscopy. This revised version was published online in August 2006 with corrections to the Cover Date.     

Determination of methylisothiocyanate in soil and water by HS-SPME followed by GC–MS–MS with a triple quadrupole

Methylisothiocyanate (MITC) is the main degradation product of metam sodium, a soil disinfectant widely used in agriculture, and is responsible for its disinfectant properties. Because MITC is highly toxic and volatile, metam sodium has to be applied in a manner that tries to reduce atmospheric emissions but still maintains adequate concentration of MITC in soil to ensure its disinfectant effect. Thus, monitoring of MITC concentrations in soil is required, and to this end sensitive, fast, and reliable analytical methods must be developed. In this work, a headspace solid-phase microextraction (HS-SPME) method was developed for MITC determination in water and soil samples using gas chromatography-tandem mass spectrometry (GC–MS–MS) with a triple-quadrupole analyzer. Two MS–MS transitions were acquired to ensure the reliable quantification and confirmation of the analyte. The method had linear behavior in the range tested (0.026–2.6 ng mL^?1 in water, 1–100 ng g^?1 in soil) with r ² over 0.999. Detection limits were 0.017 ng mL^?1 and 0.1 ng g^?1 in water and soil, respectively. Recoveries for five replicates were in the range 76–92 %, and RSD was below 7 % at the two spiking levels tested for each matrix (0.1 and 1 ng mL^?1 for water, 4 and 40 ng g^?1 for soil). The potential of using multiple HS-SPME for analyzing soil samples was also investigated, and its feasibility for quantification of MITC evaluated. The developed HS-SPME method was applied to soil samples from experimental plots treated with metam sodium following good agriculture practices. Figure

?     

Spatially Dependent Kinetics of Electrons and Excited Atoms in the Column Plasma of a He–Xe dc Discharge

The radially varying kinetics of electrons and excited atoms in the cylindrical axially homogeneous positive column of a dc glow discharge in a gas mixture of helium and 2% xenon was studied. The experimental investigations comprise the radially resolved measurements of the isotropic part of the electron velocity distribution function (EVDF) using a single-probe technique and of the densities of atoms in the lower excited states by using a laser diode absorption method. The theoretical investigations are based on the solution of the space-dependent kinetic equation for the EVDF and the balance equations of excited gas atoms. Besides a strict solution, various simplified treatments of the electron kinetics as the conventional homogeneous approach and the nonlocal approach have been applied. The electron kinetic behavior in the helium–xenon column plasma changes remarkably with increasing helium gas pressure from a distinctly nonlocal behavior at a low pressure of 100 Pa to a nearly local behavior at a medium pressure of 600 Pa.     

Comparison of Determination of Drug–Muscarinic Receptor Affinity by Cell-Membrane Chromatography and by Radioligand-Binding Assay with the Cerebrum Membrane of the Rat

This study was performed to determine whether cell-membrane chromatography (CMC) can be used to reflect the selectivity and specificity of interactions between drugs and the muscarinic acetylcholine receptor (mAChR). A cell membrane stationary phase (CMSP) was prepared by immobilizing rat cerebrum cell membrane on the surface of a silica carrier and used for rapid on-line chromatographic evaluation of ligand binding affinity to mAChR. Comparison of the results with affinity rank orders obtained from radioligand-binding assays using the same cerebrum membrane indicated a positive correlation (r²=0.8640, n=18, P < 0.0001) between the data sets and proved that CMC can be used to evaluate drug–receptor affinity for drug candidates.Revised: 19 July and 15 November 2004