Homoallylboration and homocrotylboration of aldehydes

A simple method for addition of homoallylic fragments to aldehydes is described. Cyclopropanated allylboration reagents react with aldehydes in the presence of PhBCl(2) to give high yields of bishomoallyl alcohols. Cyclopropanated cis- and trans-crotyl reagents afford the corresponding 1,3-anti- and 1,3-syn-methyl-substituted "homocrotylated" alcohols with high selectivity, consistent with a Zimmerman-Traxler transition state. Accordingly, the optically active α-substituted reactant affords the E-substituted product in 97:3 er.     

Application of the lithiation-borylation reaction to the rapid and enantioselective synthesis of the bisabolane family of sesquiterpenes

The expedient enantioselective synthesis of 5 bisabolane sesquiterpenes has been achieved using a common, one-pot lithiation-borylation reaction of secondary benzylic carbamates and either protodeboronation or oxidation to give the natural products in fewer than 5 steps, with high yield and >94?:?6 er.     

Use of copper(II)/diamine catalysts in the desymmetrisation of meso-diols and asymmetric Henry reactions: comparison of (−)-sparteine and (+)-sparteine surrogates

Four new copper(II)/diamine complexes comprising some (+)-sparteine surrogates and a cyclohexane-derived diamine were prepared and evaluated as chiral catalysts in desymmetrisation of meso-diols and asymmetric Henry reactions. Mono-benzoylation reactions generated two products with high enantioselectivity (90:10 to 97:3 er). Asymmetric Henry reactions gave nitro alcohols in 90:10 to 98:2 er. Notably, the sense of induction with the (+)-sparteine surrogates was opposite to that obtained using the copper(II)/(−)-sparteine complex. One of the nitro alcohol products was utilised in a concise synthesis of a chiral morpholine.     

Enantioselective synthesis of dihydropyrazoles by formal [4+1] cycloaddition of in situ-derived azoalkenes and sulfur ylides

An unprecedented strategy to access highly enantioenriched dihydropyrazoles is described. It involves formal [4+1] cycloadditions of in situ-derived azoalkenes and sulfur ylides catalyzed by a chiral copper/Tol-BINAP complex. A variety of synthetically and biologically important dihydropyrazoles have been obtained with high enantioselectivities (up to 97:3 er) in good yields (83-97%).     

Total synthesis of (+)-condylocarpine, (+)-isocondylocarpine, and (+)-tubotaiwine

The first enantioselective total syntheses of indole alkaloids of the condylocarpine type are reported. (+)-Condylocarpine, (+)-isocondylocarpine, and (+)-tubotaiwine were prepared in high enantiomeric purity (er > 99:1) from (1S,5R)-hexahydro-1,5-methano-1H-azocino[4,3-b]indole-12-one 7b by way of five or six isolated intermediates.     

Synthesis of "clean" and well-dispersive Pd nanoparticles with excellent electrocatalytic property on graphene oxide

Ultrafine Pd nanoparticles monodispersed on graphene oxide (GO) surfaces were successfully prepared by the redox reaction between PdCl(4)(2-) and GO. The as-made catalyst is very "clean" as a result of the surfactant-free formation process, allowing it to express high electrocatalytic ability in formic acid and ethanol oxidation relative to a commercial Pd/C catalyst. This simple and straightforward method is of significance for the facile preparation metal nanocatalysts with high catalytic activity on proper supporting materials.     

Synthesis and Diels-Alder cycloadditions of exo-imidazolidin-2-one dienes

An efficient and versatile synthesis of novel exo-imidazolidin-2-one dienes is described. This involves the base-assisted condensation/cyclization cascade reaction of the monoimino derivatives of diacetyl with a series of isocyanates. This methodology enables preparation of symmetrical dienes, as long as the substrates have the same N substituent. Moreover, use of different N-substituted starting materials leads to formation of nonsymmetrical dienes. The reactivity of these dienes was evaluated in Diels-Alder reactions, showing a high reactivity.     

Scope and Mechanisms of Frustrated Lewis Pair Catalyzed Hydrogenation Reactions of Electron‐Deficient CC Double Bonds

Several phosphonium and ammonium triarylborohydrides, which are intermediates in hydrogenation reactions catalyzed by frustrated Lewis pairs, were synthesized in high yield under mild conditions from triaryl boranes, ammonium or phosphonium halides, and triethylsilane. The kinetics and mechanisms of the reactions of these hydridoborate salts with benzhydrylium ions, iminium ions, quinone methides, and Michael acceptors were investigated, and their nucleophilicity was determined and compared with that of other hydride donors.     

A powerful synergistic effect for highly efficient diastereo- and enantioselective phase-transfer catalyzed conjugate additions

An efficient, catalytic, diastereo- and enantioselective conjugate addition of N-(diphenylmethylene)glycine tert-butyl ester to β-aryl substituted enones was realized in the presence of 1 mol% of newly desired dinuclear N-spiro-ammonium salts, affording functionalized α-amino acid derivatives in 57-98% yields with high diastereoselectivity (up to 99:1 dr) and enantioselectivity (up to 96.5:3.5 er).     

Isothiourea-Catalyzed Atropselective Acylation of Biaryl Phenols via Sequential Desymmetrization/Kinetic Resolution

Axially chiral phenols are attractive targets in organic synthesis. This motif is central to many natural products and widely used as precursors to, or directly, as chiral ligands and catalysts. Despite their utility few simple catalytic methods are available for their synthesis in high enantiopurity. Herein the atropselective acylation of a range of symmetric biaryl diols is investigated using isothiourea catalysis. Studies on a model biaryl diol substrate shows that the high product er observed in the process is a result of two successive enantioselective reactions consisting of an initial enantioselective desymmetrization coupled with a second chiroablative kinetic resolution. Extension of this process to a range of substrates, including a challenging tetraorthosubstituted biaryl diol, led to highly enantioenriched products (14 examples, up to 98:2 er), with either HyperBTM or BTM identified as the optimal catalyst depending upon the substitution pattern within the substrate. Computation has been used to understand the factors that lead to high enantiocontrol in this process, with maintenance of planarity to maximize a 1,5-S⋅⋅⋅O interaction within the key acyl ammonium intermediate identified as the major feature that determines atropselective acylation and thus product enantioselectivity.     

Isothiourea‐Catalyzed Atropselective Acylation of Biaryl Phenols via Sequential Desymmetrization/Kinetic Resolution

Axially chiral phenols are attractive targets in organic synthesis. This motif is central to many natural products and widely used as precursors to, or directly, as chiral ligands and catalysts. Despite their utility few simple catalytic methods are available for their synthesis in high enantiopurity. Herein the atropselective acylation of a range of symmetric biaryl diols is investigated using isothiourea catalysis. Studies on a model biaryl diol substrate shows that the high product er observed in the process is a result of two successive enantioselective reactions consisting of an initial enantioselective desymmetrization coupled with a second chiroablative kinetic resolution. Extension of this process to a range of substrates, including a challenging tetraorthosubstituted biaryl diol, led to highly enantioenriched products (14 examples, up to 98:2 er), with either HyperBTM or BTM identified as the optimal catalyst depending upon the substitution pattern within the substrate. Computation has been used to understand the factors that lead to high enantiocontrol in this process, with maintenance of planarity to maximize a 1,5‐S???O interaction within the key acyl ammonium intermediate identified as the major feature that determines atropselective acylation and thus product enantioselectivity.     

Enantioselective, palladium-catalyzed alpha-arylation of N-Boc-pyrrolidine

This communication discloses the first instance of the enantioselective Pd-catalyzed alpha-arylation of N-Boc-pyrrolidine. The methodology relies on Beak's sparteine-mediated, enantioselective deprotonation of N-Boc-pyrrolidine to form the 2-pyrrolidinolithium specices in high enantiomeric ratio (er). Transmetalation of this intermediate with zinc chloride generates the stereochemically rigid, 2-pyrrolidinozinc reagent, which was readily coupled to a variety of functionalized aryl halides at room temperature using a catalyst generated from Pd(OAc)2 and PtBu3-HBF4. A diverse array of 2-aryl-N-Boc-pyrrolidines was synthesized using this methodology, providing adducts consistently in a 96:4 er. A survey of the stoichiometry revealed that as little as 0.3 equiv of zinc could be used in the coupling reaction, and the 2-pyrrolidinozinc reagent was found to exhibit stereochemical stability up to 60 degrees C. The method allows for the most convergent and reliable preparation of a broad range of functionalized 2-aryl-N-Boc-pyrrolidines in high enantioselectivity, which is highlighted in this report by the enantioselective synthesis of (R)-nicotine.     

Simultaneous Determination and Health Risk Assessment of Four High Detection Rate Pesticide Residues in Pu’er Tea from Yunnan,China

Four pesticides with a high detection rate in Pu’er tea have been determined by a QuEChERS (quick, easy, cheap, effective, rugged, safe) method with multiwalled carbon nanotubes (MWCNTs), and combined ultrahigh-performance liquid chromatography–triple quadrupole linear ion trap-tandem mass spectrometry (UHPLC-QTRAP-MS/MS). MWCNs have been compared with other common purification materials, and found to be superior. The matrix effect was systematically studied, and the results show that the MWCNs can quickly and effectively reduce matrix interference values, which were in the range from −17.8 to 13.8. The coefficients (R²) were greater than 0.99, with the limit of quantification ranging from 0.1 to 0.5 μg/kg, and the recovery rate ranging from 74.8% to 105.0%, while the relative standard deviation (RSD) ranged from 3.9% to 6.6%. A total of 300 samples, taken from three areas in which Yunnan Pu’er tea was most commonly produced, tested for four pesticides. The results show that the detection rate of tolfenpyrad in Pu’er tea was 35.7%, which is higher than other pesticides, and the lowest was indoxacarb, with 5.2%. The residual concentrations of chlorpyrifos, triazophos, tolfenpyrad and indoxacarb ranged from 1.10 to 5.28, 0.014 to 0.103, 1.02 to 51.8, and 1.07 to 4.89 mg/kg, respectively. By comparing with China’s pesticide residue limits in tea (GB 2763-2021), the over standard rates of chlorpyrifos, tolfenpyrad, and indoxacarb were 4.35%, 0.87% and 0%, respectively. The risk assessment result obtained with the hazard quotient (HQ) method shows that the HQ of the four pesticides was far less than one, indicating that the risk is considered acceptable for the four pesticides in Pu’er tea. The largest HQ was found for tolfenpyrad, 0.0135, and the smallest was found for indoxacarb, 0.000757, but more attention should be paid to tolfenpyrad in daily diets in the future, because its detection rate, and residual and residual median were all relatively high.     

Enantio‐ and Diastereoselective,Lewis Base Catalyzed,Cascade Sulfenoacetalization of Alkenyl Aldehydes

A catalytic, enantio‐, and diastereoselective formation of sulfenyl acetals bearing multiple stereogenic centers is reported. Alkenyl aldehydes undergo a chiral thiiranium ion initiated cascade starting with intramolecular capture by a formyl group and termination by capture with HFIP solvent. This method provides a one‐pot synthesis of dihydropyran and 1,3‐disubstituted isochroman acetals in good to excellent yield and with high levels of diastereo‐ (up to >99:1 dr) and enantiocontrol (up to 99:1 er).     

Enantio‐ and Diastereoselective,Lewis Base Catalyzed,Cascade Sulfenoacetalization of Alkenyl Aldehydes

A catalytic, enantio‐, and diastereoselective formation of sulfenyl acetals bearing multiple stereogenic centers is reported. Alkenyl aldehydes undergo a chiral thiiranium ion initiated cascade starting with intramolecular capture by a formyl group and termination by capture with HFIP solvent. This method provides a one‐pot synthesis of dihydropyran and 1,3‐disubstituted isochroman acetals in good to excellent yield and with high levels of diastereo‐ (up to >99:1 dr) and enantiocontrol (up to 99:1 er).     

Direct Electrocatalytic Oxidation and Simultaneous Determination of 5‐Methylcytosine and Cytosine at Electrochemically Reduced Graphene Modified Glassy Carbon Electrode

Direct electrocatalytic oxidation and simultaneous determination of 5‐methylcytosine (5‐mC) and cytosine(C) were realized in alkaline solutions by differential pulse voltammetry (DPV) based on an electrochemically reduced graphene oxide (er‐GO) modified glassy carbon electrode (er‐GO/GCE). The as‐prepared er‐GO/GCE exhibited good electrocatalytic activity towards the oxidation of 5‐mC and C. Under optimum conditions, the er‐GO/GCE was applied to the simultaneous determination of 5‐mC and C with a significantly improved peak potential resolution (about 150 mV), and a linear relationship can be obtained in the range of 6–200.0 µmol/L and 8–250.0 µmol/L, respectively. In addition, the proposed method was further successfully applied to the analysis of methylation status in short CpG oligonucleotides with satisfactory results.     

Cu-Catalyzed Diastereo- and Enantioselective Reactions of γ,γ-Disubstituted Allyldiboron Compounds with Ketones

A catalytic diastereo- and enantioselective method for the preparation of complex tertiary homoallylic alcohols containing a vicinal quaternary carbon stereogenic center and a versatile alkenylboronic ester is disclosed. Transformations are promoted by 5 mol % of a readily available copper catalyst bearing a bulky monodentate phosphoramidite ligand, which is essential for attaining both high dr and er. Reactions proceed with a wide variety of ketones and allylic 1,1-diboronate reagents, which enables the efficient preparation of diverse array of molecular scaffolds.     

Enantioselective one-pot conjugate addition of grignard reagents to cyclic enones followed by amidomethylation

Enantioselective conjugate addition of Grignard reagents to enones, catalyzed by Cu-Taniaphos or Josiphos complex, affords chiral enolates. Ensuing one-pot Mannich reaction with TiCl(4)-generated imine leads to aminocarbonyl compounds with benzyloxycarbonyl-protected nitrogen. Both diastereomers of these compounds are isolated in moderate yields but high enantiomeric purities (up to er 97.5:2.5).     

Catalytic enantioselective construction of quaternary stereocenters by direct vinylogous Michael addition of deconjugated butenolides to nitroolefins

A direct vinylogous Michael reaction of γ-substituted deconjugated butenolides with nitroolefins has been developed with the help of a newly identified quinine-derived bifunctional catalyst, allowing the synthesis of densely functionalized products with contiguous quaternary and tertiary stereocenters in excellent yield with perfect diastereoselectivity (>20:1 dr) and high enantioselectivity (up to 99:1 er).     

Temperature-induced formation and contraction of micelle-like aggregates in aqueous solutions of thermoresponsive short-chain copolymers

A combination of turbidity, light scattering, and steady shear viscosity experiments has revealed that aqueous solutions of an amphiphilic diblock copolymer or a negatively charged triblock copolymer, both containing poly(N-isopropylacrylamide), can undergo a temperature-induced transition from loose intermicellar clusters to collapsed core-shell nanostructures. Turbidity, light scattering, and viscosity results of these short-chain copolymers disclose transition peaks at intermediate temperatures. At high temperatures, the compact core-shell particles from the diblock copolymer aggregate, whereas no renewed interpolymer association is observed for the triblock copolymer or for the solution of the diblock copolymer with added sodium dodecyl sulfate because the electrostatic repulsive interactions suppress the tendency of forming interpolymer clusters. The temperature-induced building up of intermicellar structures and the formation of large aggregates at high temperature in the solution of the diblock copolymer is significantly reduced under the influence of high shear rates.