Analytical solution of cracked shell resting on elastic foundation

The elastostatic problem for cracked shallow spherical shell resting on linear elastic foundation is considered. The problem is formulated for a homogeneous isotropic material within the confines of a linearized shallow shell theory. By making use of integral transforms and asymptotic analysis, the problem is reduced to the solution of a pair of singular integral equations. The stress distribution obtained, around the crack tip, is similar to that of the elasticity solutions. The numerical results obtained agree well with those of previous work, where the elastic supports were neglected. The influences of the shell curvature and the modulus of subgrade reaction on the stress intensity factor are given.     

Stress-strain analysis of a composite truncated conical shell

The stress-strain state of a nonshallow truncated conical shell made of a composite material and subjected to axial forces at the ends is studied. A variational difference method is used. Calculations are carried out for an orthotropic shell with low shear stiffness __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 7, pp. 66–72, July 2007.     

Non-symmetrical large deformation of a shallow thin conical shell

I.IntroductionItisimportanttoresearchnon-symmetricalquestionsofshallowcollicalshellsintheoryoronapplication.Asonekindofpressurevessel'sparts,shallowconicalshellsareverycommonlyusedillellgineerillgpractice,becausethedifficultyofmanul\lctul.illgthemis'small.AlthotlghwelookupmanyChineseandtbreignperiodicalswhicharctlblctobefound,wehavenotyeth'ulldarticlesanddocumentsfornon-symmetricalandnolllinearquestionsofshitllowconictllshells.Oval'rccelltyears,ProlbssorWangXinzhiandhiscolleagueshavedonealot…     

Parametric instability of a rotating truncated conical shell subjected to periodic axial loads

Parametric instability of a rotating truncated conical shell subjected to periodic axial loads is studied in the paper. Through deriving accurate expressions of inertial force and initial hoop tension, a rotating conical shell model is presented based upon the Love's thin shell theory. Considering the periodic axial loads, equations of motion of the system with periodic stiffness coefficients are obtained utilizing the generalized differential quadrature (GDQ) method. Hill's method is introduced for parametric instability analysis. Primary instability regions for various natural modes are computed. Effects of rotational speed, constant axial load, cone angle and other geometrical parameters on the location and width of various instability regions are examined.     

Influence of elastic foundations and carbon nanotube reinforcement on the hydrostatic buckling pressure of truncated conical shells

In this study, the effects of elastic foundations(EFs) and carbon nanotube(CNT) reinforcement on the hydrostatic buckling pressure(HBP) of truncated conical shells(TCSs) are investigated. The first order shear deformation theory(FOSDT) is generalized to the buckling problem of TCSs reinforced with CNTs resting on the EFs for the first time. The material properties of composite TCSs reinforced with CNTs are graded linearly according to the thickness coordinate. The Winkler elastic foundation(W-EF...     

Static and free vibration analysis of graphene platelets reinforced composite truncated conical shell,cylindrical shell,and annular plate using theory of elasticity and DQM

Abstract

In this paper, three-dimensional static and free vibration analysis of functionally graded graphene platelets-reinforced composite (FG-GPLRC) truncated conical shells, cylindrical shells and annular plates with various boundary conditions is carried out within the framework of elasticity theory. The main contribution of the present work is that formulation for free vibration and bending behavior of the FG-GPLRC truncated conical shell based on theory of elasticity has not yet been reported. Additionally, formulation and solution for cylindrical shell and annular plate are derived by changing the semi vertex angle in formulation and solution of FG-GPLRC truncated conical shell. A semi-analytical solution is proposed base on employing differential quadrature method (DQM) together with state-space technique. Validity of current approach is assessed by comparing its numerical results with those available in the literature. An especial attention is drawn to the role of GPLs weight fraction, patterns of GPLs distribution through the thickness direction, geometrical parameters such as semi-vertex angle, length to mid-radius ratio on natural frequencies and bending characteristics. Numerical results reveal that desirable static and free vibration response (such as lower radial deflection and higher natural frequencies) can be achieved by locating more square shaped GPLs near inner and outer surfaces.     

Free vibration and critical speed of moderately thick rotating laminated composite conical shell using generalized differential quadrature method

The generalized differential quadrature method (GDQM) is employed to consider the free vibration and critical speed of moderately thick rotating laminated composite conical shells with different boundary conditions developed from the first-order shear deformation theory (FSDT). The equations of motion are obtained applying Hamilton’s concept, which contain the influence of the centrifugal force, the Coriolis acceleration, and the preliminary hoop stress. In addition, the axial load is applied to the conical shell as a ratio of the global critical buckling load. The governing partial differential equations are given in the expressions of five components of displacement related to the points lying on the reference surface of the shell. Afterward, the governing differential equations are converted into a group of algebraic equations by using the GDQM. The outcomes are achieved considering the effects of stacking sequences, thickness of the shell, rotating velocities, half-vertex cone angle, and boundary conditions. Furthermore, the outcomes indicate that the rate of the convergence of frequencies is swift, and the numerical technique is superior stable. Three comparisons between the selected outcomes and those of other research are accomplished, and excellent agreement is achieved.     

四边简支功能梯度圆锥壳的非线性振动分析

研究了四边简支条件下功能梯度圆锥壳的非线性自由振动。首先,通过Voigt模型和幂律分布模型描述了功能梯度材料的物理属性。然后,考虑von-Karman几何非线性建立了功能梯度圆锥壳的能量表达式,利用Hamilton原理推出圆锥壳的运动方程。在此基础上,采用Galerkin法,只考虑横向振动,功能梯度圆锥壳运动方程可简化为单自由度非线性振动微分方程。最后,通过改进的L-P法和Runge-Kutta法求解非线性振动方程,讨论功能梯度圆锥壳的非线性振动响应,分析几何参数和陶瓷体积分数指数对圆锥壳非线性频率响应的影响。结果表明,几何参数对非线性频率和响应的影响相较于陶瓷体积分数指数更明显;圆锥壳的几何参数和陶瓷体积分数指数通过改变非线性频率影响振动响应;功能梯度圆锥壳呈弹簧渐硬非线性振动特性。     

Spline-approximation solution of two-dimensional problems of statics for orthotropic conical shells in a refined formulation

An approach to solving two-dimensional stress-strain problems for orthotropic conical shells of variable thickness in a refined formulation is developed. The approach is based on the spline-approximation and the stable discrete-orthogonalization method, which is used to solve the one-dimensional problem. The dependence of the deflection and stresses on the thickness and apex angle of a shell of constant volume is given as an example __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 11, pp. 43–54, November 2007.     

Buckling analysis of functionally graded material (FGM) sandwich truncated conical shells reinforced by FGM stiffeners filled inside by elastic foundations

An analytical solution for buckling of an eccentrically stiffened sandwich truncated conical shell is investigated. The shell consists of two functionally graded material (FGM) coating layers and a core layer which are metal or ceramic subjected to an axial compressive load and an external uniform pressure. Shells are reinforced by stringers and rings, in which the material properties of shells and stiffeners are graded in the thickness direction following a general sigmoid law distribution. Two models of coated shell-stiffener arrangements are investigated. The change of the spacing between stringers in the meridional direction is taken into account. A couple set of three-variable-coefficient partial differential equations in terms of displacement components are solved by the Galerkin method. A closed-form expression for determining the buckling load is obtained. The numerical examples are presented and compared with previous works.     

大型纵向加筋截断锥壳稳定性的半离散分析

如何计算大型纵向加筋截断锥壳的稳定问题，尚未见到有关报导。本文在沿纵向和环向分别采用Ｈｅｒｍｉｔｅ插值和三角级数插值的基础上，建立了几何非线性带筋环单元，进而导出了半离散分析法，并经过实例检验了它的正确与可靠。这样，本文为建立各类工程结构的半离散单元提出了一种新的途径。     

Thermoelastically coupled axisymmetric nonlinear vibration of shallow spherical and conical shells

The problem of axisymmetric nonlinear vibration for shallow thin spherical and conical shells when temperature and strain fields are coupled is studied. Based on the large deflection theories of yon Ktirrntin and the theory of thermoelusticity, the whole governing equations and their simplified type are derived. The time-spatial variables are separated by Galerkin ‘ s technique, thus reducing the governing equations to a system of time-dependent nonlinear ordinary differential equation. By means of regular perturbation method and multiple-scales method, the first-order approximate analytical solution for characteristic relation of frequency vs amplitude parameters along with the decay rate of amplitude are obtained, and the effects of different geometric parameters and coupling factors us well us boundary conditions on thermoelustically coupled nonlinear vibration behaviors are discussed.     

THEORY OF THICK-WALLED SHELLS AND ITS APPLICATION IN CYLINDRICAL SHELL

In this paper, a theory of thick-walled shells is established by means of Hellinger-Reissner's variational principle, with displacement and stress assumptions. The displacements are expanded into power series of the thickness coordinate. Only the first four and the first three terms are used for the displacements parallel and normal to the middle surface respectively. The normal extruding and transverse shear stresses are assumed to bt, cubic polynomials and to satLyfy the boundary stress conditions on the outer and inner surfaces of the shell. The governing equations and boundary conditions are derived by means of variational principle. As an example, a thick-walled cylindrical.shell is disscussed with the theory proposed. Furthermore, a photoelastic experiment has been carried out, and the results are in fair agreement with the computations.     

The asymptotic solving equations of thick ring shell and its solution under moment Mo

In this paper, from the fundamental equations of three dimensional elastic mechanics, we have found a sequence of asymptotic solving equations of thick ring shell (or body) applied arbitrary loads by the perturbation method based upon a geometric small parameter a=r_o/R_o, which may be divided into two independent equation groups which are similar to the equation groups for plane strain and torsional problems. Using these equations, we have also found first order and second order approximate solutions of thick ring shell applied moment M_o.     

A modified Hellinger-Reissner variational functional including only two independent variables for large displacement of thin shallow shell

I.IntroductionThemathematicalbasisofthefiniteelementmethodisthevariationalprinciple,andthedevelopmentofthefiniteelementmethodimpelsthevariationalprincipleitselftogetanewdevelopment.ThevariationalprincipIepresentedbyT.H.H.PianandP.Tongistheonethatthecontin…     

正交各向异性层状弹性半平面动力奇异解及其应用

本文采用Ｌａｐｌａｃｅ－Ｆｏｕｒｉｅｒ联合变换及传递矩阵方法导出了正交各向异性层状弹性半平面动力问题的时域奇异解的解析表达式，讨论了奇异解的数值实施。并把奇异解应用于边界元，计算了地下直墙拱结构的动力响应问题。     

Stress-strain analysis of closed nonthin orthotropic conical shells of varying thickness

The approach developed to solve two-dimensional static problems for nonthin conical shells of varying thickness is used to examine the effect of the geometrical parameters on the stress-strain state of shells. The approach is based on spline-approximation and a stable numerical method of solving one-dimensional problems __________ Translated from Prikladnaya Mekhanika, Vol. 44, No. 6, pp. 46–58, June 2008.     

Exact static analysis of a rotating piezoelectric spherical shell

This paper gives an exact analysis of a rotating piezoelectric spherical shell with arbitrary thickness. At first, three displacement functions are introduced to simplify the basic equations of a spherically isotropic, piezoelectric medium. By expanding the displacement functions as well as the electric potential in terms of spherical harmonics, the basic equations of equilibrium are converted to an uncoupled Euler type, second order ordinary differential equation and a coupled system of three second order ordinary differential equations. A general solution to the homogeneous equations of equilibrium is then derived. The static analysis of a rotating spherical shell is then performed and numerical example is presented. The project supported by the National Natural Science Foundation of China, the Zhejiang Provincial Natural Science Foundation, and the Japanese Committee of Culture, Education and Science.     

Physically and geometrically nonlinear deformation of thin-walled conical shells with a curvilinear hole

The elastoplastic state of thin conical shells with a curvilinear (circular) hole is analyzed assuming finite deflections. The distribution of stresses, strains, and displacements along the hole boundary and in the zone of their concentration are studied. The stress-strain state around a circular hole in shells subject to internal pressure of prescribed intensity is analyzed taking into account two nonlinear factors __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 4, pp. 73–79, April 2007.     

Nonlinear stability of truncated shallow conical sandwich shell with variable thickness

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｒｅｃｅｎｔｙｅａｒｓ,ｗｉｔｈｔｈｅｅｓｓｅｎｔｉａｌａｄｖａｎｔａｇｅｓｏｆｌｉｇｈｔｗｅｉｇｈｔａｎｄｈｉｇｈｒｉｇｉｄｉｔｙ ,ｓａｎｄｗｉｃｈｐｌａｔｅｓａｎｄｓｈｅｌｌｓｈａｖｅｂｅｅｎｕｓｅｄａｓａｎｉｍｐｏｒｔａｎｔｐａｔｔｅｒｎｏｆｓｔｒｕｃｔｕｒｅｅｌｅｍｅｎｔｓｉｎａｅｒｏｎａｕｔｉｃａｌ,ａｓｔｒｏｎａｕｔｉｃａｌａｎｄｎａｖａｌｅｎｇｉｎｅｅｒｉｎｇ .Ｔｈｅｒｅｆｏｒｅ ,ａｃｏｎｓｉｄｅｒａｂｌｅａｍｏｕｎｔｏｆｒｅｓｅａｒｃｈｈａｓｂｅｅｎｃｏ…