Vibrational spectra of the peroxotantalates (NH4)3[Ta(O2)4], K3[Ta(O2)4], Rb3[Ta(O2)4] and Cs3[Ta(O2)4] and the crystal structure of Rb3[Ta(O2)4]

The compounds (NH₄)₃[Ta(O₂)₄], K₃[Ta(O₂)₄], Rb₃[Ta(O₂)₄] and Cs₃[Ta(O₂)₄] have been prepared and investigated by X-ray powder methods as well as Raman- and IR-spectroscopy. In the case of Rb₃[Ta(O₂)₄] the structure has been solved from single crystal data. It is shown that all these compounds are isotypic and crystallize in the K₃[Cr(O₂)₄] type (SG , No. 121). The infrared- and Raman spectra (recorded on powdered samples) are discussed with respect to the internal vibrations of the peroxo-group and the dodecahedral [Ta(O₂)₄]³⁻ ion. Symmetry coordinates for the [Ta(O₂)₄]³⁻ ion are given from which the vibrational modes of the O-O stretching vibrations of the O₂²⁻ groups, the Ta-O stretching vibrations and the Ta-O bending vibrations are deduced.     

Coating of Al2O3 on layered Li(Mn1/3Ni1/3Co1/3)O2 using CO2 as green precipitant and their improved electrochemical performance for lithium ion batteries

Li(Mn_1/3Ni_1/3Co_1/3)O₂ cathode materials were fabricated by a hydroxide precursor method.Al₂O₃ was coated on the surface of the Li(Mn_1/3Ni_1/3CO_1/3)O₂ through a simple and effective one-step electrostatic self-assembly method.In the coating process,a NaHCO₃-H₂CO₃ buffer was formed spontaneously when CO₂ was introduced into the NaAlO₂ solution.Compared with bare Li(Mn_1/3Ni_1/3Co_1/3)O₂, the surface-modified samples exhibited better cycling performance,rate capability and rate capability retention.The Al₂O₃-coated Li(Mn_1/3Ni_1/3Co_1/3)O₂ electrodes delivered a discharge capacity of about 115 mAh·g^-1 at 2A·g^-1,but only 84 mAh·g^-1 for the bare one.The capacity retention of the Al₂O₃-coated Li(Mn_1/3Ni_1/3Co_1/3)O₂ was 90.7%after 50 cycles,about 30%higher than that of the pristine one.     

On the crystal chemistry of Tm2Ni1.896(4)In, Tm2.22(2)Ni1.81(1)In0.78(2), Tm4.83(3)Ni2In1.17(3), and Er5Ni2In

The rare earth-nickel-indides Tm₂Ni_1.896(4)In, Tm_2.22(2)Ni_1.81(1)In_0.78(2), Tm_4.83(3)Ni₂In_1.17(3), and Er₅Ni₂In were synthesized from the elements by arc-melting and subsequent annealing for the latter three compounds. Three indides were investigated by X-ray powder and single crystal diffraction: Mo₂FeB₂ type, P4/mbm, Z=2, a=731.08(4), c=358.80(3) pm, wR₂=0.0201, 178 F² values, 13 variables for Tm₂Ni_1.896(4)In, a=734.37(7), c=358.6(1) pm, wR₂=0.0539, 262 F² values, 14 variables for Tm_2.22(2)Ni_1.81(1)In_0.78(2), and Mo₅SiB₂ type, I4/mcm, a=751.0(2), c=1317.1(3) pm, wR₂=0.0751, 317 F² values, 17 variables for Tm_4.83(3)Ni₂In_1.17(3). X-ray powder data for Er₅Ni₂In revealed a=754.6(2) and c=1323.3(5) pm. The Mo₂FeB₂ type structures of Tm₂Ni_1.896(4)In and Tm_2.22(2)Ni_1.81(1)In_0.78(2) are intergrowths of slightly distorted CsCl and AlB₂ related slabs, however, with different crystal chemical features. The nickel sites within the AlB₂ slabs are not fully occupied in both indides. Additionally In/Tm mixing is possible at the center of the CsCl slab, as is evident from the structure refinement of Tm_2.22(2)Ni_1.81(1)In_0.78(2). The Mo₅SiB₂ type structures of Tm_4.83(3)Ni₂In_1.17(3) and Er₅Ni₂In can be considered as an intergrowth of distorted CuAl₂ and U₃Si₂ related slabs in an ABA′B′ stacking sequence along the c-axis. Again, one thulium site shows Tm/In mixing. The U₃Si₂ related slab has great structural similarities with the Mo₂FeB₂ type structure of Tm₂Ni_1.896(4)In and Tm_2.22(2)Ni_1.81(1)In_0.78(2). The crystal chemical peculiarities and chemical bonding in these intermetallics are briefly discussed.     

Non-stoichiometric 1:2 ordered perovskites in the Ba(Li1/4Nb3/4)O3-Ba(Li2/5W3/5)O3 system

Although both end members in the (1−x)Ba(Li_1/4Nb_3/4)O₃-xBa(Li_2/5W_3/5)O₃ (BLNW) system adopt a hexagonal perovskite structure, B-site ordered cubic perovskites are formed for the majority of their solid solutions (0.238?x?0.833). Within this range, single-phase 1:2 order (, , ) is stabilized for 0.238?x?0.385. In contrast to all known A(B_1/3^IB_2/3^II)O₃ perovskites, the 1:2 ordered BLNW solid solutions do not include any composition with a 1:2 cation distribution and the structure exhibits extensive non-stoichiometry. Structure refinements support a model where Li and W occupy different positions and Nb is distributed on both sites, i.e. Ba[(Li_3/4+y/2Nb_1/4−y/2)_1/3(Nb_1−yW_y)_2/3]O₃ (y=0.21-0.35, where y=0.9x). The stabilization of the non-stoichiometric order arises from the large charge/size site differences; the loss of 1:2 order for W-rich compositions is related to local charge imbalances on the A-site sub-lattice. The range of single-phase 1:1 order is confined to x=0.833, (Ba(Li_3/4Nb_1/4)_1/2(W)_1/2)O₃), where the site charge/size difference is maximized and the on-site mismatches are minimized. The microwave dielectric loss properties of the ordered BLNW solid solutions are significantly inferior as compared to their stoichiometric counterparts.     

Hydrothermal Synthesis and Spectroscopic and Magnetic Behavior of the Mn7(HOXO3)4(XO4)2(X=As, P) Compounds. Crystal Structure of Mn7(HOAsO3)4(AsO4)2

The Mn₇(HOXO₃)₄(XO₄)₂ (X=As, P) compounds have been synthesized by using hydrothermal conditions. The arsenate phase was obtained under autogeneous pressure at 170°C. However, more drastic conditions at both pressure and temperature were necessary in the attainment of the phosphate compound. The crystal structure of Mn₇(HOAsO₃)₄(AsO₄)₂ was solved using single-crystal data. The unit-cell parameters are a=6.810(3) Å, b=8.239(2) Å, c=10.011(4) Å, α=104.31(2)°, β=108.94(3)°, γ=101.25(2)°. Triclinic, P-1 with Z=1. The isostructural Mn₇(HOPO₃)₄(PO₄)₂ phase was characterized from X-ray powder diffraction techniques. The crystal structure of both compounds consists of zig-zag chains constructed by dimeric edge-sharing Mn₂O₁₀ octahedra linked through the MnO₅ trigonal bipyramids. The three-dimensional framework is completed by the connection between isolated MnO₆ entities to the dimers octahedra and trigonal bipyramids. The existence of hydrogenarsenate and hydrogenphosphate anions has been confirmed by IR and Raman spectroscopies. Magnetic measurements indicate the existence of antiferromagnetic interactions in both compounds, which are slightly stronger in the arsenate phase.     

混合价三核锰配合物Mn3O(O2CCCl3)6(py)2(H2O)的合成、晶体结构及磁性

A new mixed-valence trinuclear oxo-centered manganese complex Mn₃O(O₂CCCl₃)₆(py)₂(H₂O) was prepared by the reaction of NⁿBu₄MnO₄ with Mn(OAc)₂·4H₂O, trichloroacetic acid and pyridine in absolute EtOH. The crystal structure was determined. The complex crystallizes in monoclinic, space group P2₁/c, unit cell parame-ters, a=14.951(1), b=20.791(2), c=17.882(1)?,α=γ=90°, β=102.67(1)°. Variable temperature solid state magnetic susceptibility study shows that the complex has an antiferromagnetic exchange interaction. CCDC: 183369.     

The crystallographic and magnetic characteristics of Sr2CrO4 (K2NiF4-type) and Sr10(CrO4)6F2 (apatite-type)

Solid-state reaction between SrCO₃, Cr₂O₃ and SrF₂ has produced the apatite phase Sr₁₀(CrO₄)₆F₂ and Sr₂CrO₄ which adopts the K₂NiF₄-type structure. The reaction outcome was very sensitive to the heating rate with rapid rise times favouring the formation of Sr₂CrO₄, which has been synthesised at ambient pressure for the first time. Powder X-ray diffraction and electron diffraction confirmed that Sr₂CrO₄ adopts a body centred tetragonal cell (space group I4/mmm) with lattice parameters a=3.8357(1) Å and c=12.7169(1) Å, while a combination of neutron and X-ray diffraction verified Sr₁₀(CrO₄)₆F₂ is hexagonal (space group P6₃/m) with lattice parameters a=9.9570(1) Å and c=7.4292(1) Å. X-ray photoelectron spectroscopy and magnetic measurements were used to characterise the oxidation states of chromium contained within these phases.     

Solid state photodecomposition studies of K4Ti(O2)4·2H2O, K3Ta(O2)2F4 and K2V2O3(O2)2F2

The compounds K₄Ti(O₂)₄·2H₂O, K₃Ta(O₂)₂F₄ and K₂V₂O₃(O₂)₂F₂ undergo photolysis in the solid state. The photolysis kinetics obey the parabolic rate equation p = kt^1/2 and indicate a monoexcitation process for the photolysis. These features are similar to those reported previously for peroxo complexes. The mechanism of evolution of oxygen reported earlier appears to be the same in all these solids.     

Possible production of O2(1Δg) and O2(1Σ+g) in the reaction of NO with O3

High-resolution spectra of the NO₂ continuum emission produced from the reaction NO + O₃ → NO₂ + O₂ have been investigated to detect any possible emission from O₂(¹Δ_g) at 1270 nm or O₂(¹Σ⁺_g) at 762 nm. The photolysis of O₃/O₂ mixtures at 253.7 nm, which produces both states of O₂ with known quantum efficiency, has been used as an internal standard. From the results it is concluded that less than 1/300 and 1/200 of the NO + O₃ reactive collissions result in production of O₂(¹Δ_g) or O₂(¹Σ⁺_g), respectively, at room temperature.     

Syntheses, crystal structures and optical properties of the first strontium selenium(IV) and tellurium(IV) oxychlorides: Sr3(SeO3)(Se2O5)Cl2 and Sr4(Te3O8)Cl4

Two new quaternary strontium selenium(IV) and tellurium(IV) oxychlorides, namely, Sr₃(SeO₃)(Se₂O₅)Cl₂ and Sr₄(Te₃O₈)Cl₄, have been prepared by solid-state reaction. Sr₃(SeO₃)(Se₂O₅)Cl₂ features a three-dimensional (3D) network structure constructed from strontium(II) interconnected by Cl⁻, SeO₃²⁻ as well as Se₂O₅²⁻ anions. The structure of Sr₄(Te₃O₈)Cl₄ features a 3D network in which the strontium tellurium oxide slabs are interconnected by bridging Cl⁻ anions. The diffuse reflectance spectrum measurements and results of the electronic band structure calculations indicate that both compounds are wide band-gap semiconductors.     

Preparation of Mn2O3 and Mn3O4 nanofibers via an electrospinning technique

Thin PVA/manganese acetate composite fibers were prepared by using sol-gel processing and electrospinning technique. After calcinations of the above precursor fibers, Mn₂O₃ and Mn₃O₄ nanofibers with a diameter of 50-200 nm could be successfully obtained. The fibers were characterized by TG-DTA, Scanning electron microscopy, FT-IR, WAXD, respectively. The results showed that the crystalline phase and morphology of nanofibers were largely influenced by the calcination temperature.     

Hydrothermal synthesis and luminescent properties of Sb-doped Sr3(PO4)2

Sb³⁺-doped Sr₃(PO₄)₂ crystals has been synthesized using phosphoric acid, strontium hydroxide and antimony powder as the raw materials through a hydrothermal reaction method. The crystallinity and the microstructure were investigated using X-ray diffraction and scanning electron microscopy. The photoluminescent property was investigated using luminescent spectrometer. Phase pure Sr₃(PO₄)₂ crystal was obtained and it has a shape of hexagonal rod. It showed the emission and excitation peaks at 396, 250, and 215 nm, respectively, indicating that the emission is attributed to ³P₁-¹S₀ transition and the excitation is attributed to ¹S₀-³P₁ and ¹S₀-¹P₁ transition. It was also observed that the intensity of photoluminescence is thermally stable up to 673 K.     

Li1.2Mn0.54Ni0.13Co0.13O2正极材料的Ga2O3包覆改性及电化学性能

首先采用共沉淀方法制备富锂锰基正极材料 Li_1.2Mn_0.54Ni_0.13Co_0.13O₂原始样品(P-LRMO), 然后通过简单的湿化学法以及低温煅烧方法对其进行不同含量 Ga₂O₃原位包覆。透射电子显微镜(TEM)以及 X射线光电子能谱(XPS)结果表明在 P-LRMO表面成功合成了 Ga₂O₃包覆层。电化学测试结果表明:含有 3 %Ga₂O₃的改性材料 G3-LRMO具有最优的电化学性能, 其在 0.1C倍率(电流密度为 25 mA·g^-1)下首圈充放电比容量可以达到 270.1 mAh·g^-1, 在 5C倍率下容量仍能保持 127.4 mAh·g^-1, 优于未改性材料的 90.7 mAh·g^-1, 表现出优异的倍率性能。G3-LRMO在 1C倍率下循环 200圈后仍有 190.7 mAh·g^-1的容量, 容量保持率由未改性前的 72.9 %提升至 85.6 %, 证明 Ga₂O₃包覆改性能有效提升富锂锰基材料的循环稳定性。并且, G3-LRMO在 1C倍率下循环 100圈后, 电荷转移阻抗(R_ct)为 107.7 Ω, 远低于未改性材料的 251.5 Ω, 表明 Ga₂O₃包覆层能提高材料的电子传输速率。     

Growth and spectroscopic properties of Nd-doped Sr3Y2 (BO3)4 crystal

A new crystal of Nd³⁺:Sr₃Y₂ (BO₃)₄ with a dimension of Φ 15×30 mm³ was grown by the Czochralski method. The grown crystal was characterized using X-ray diffraction. The absorption and emission spectra of Nd³⁺:Sr₃Y₂ (BO₃)₄ were investigated. The absorption transition at 807 nm has an FWHM of 16 nm. The absorption and emission cross sections are 6.32×10⁻²⁰ cm² at 807 nm and 1.07×10⁻¹⁹ cm² at 1065 nm, respectively. The luminescence lifetime τ_f is 51.7 μs at room temperature.     

Phase transitions in Ca3(BN2)2 and Sr3(BN2)2

α-Ca₃(BN₂)₂ crystallizes in the cubic system (space group: ) with one type of calcium ions disordered over of equivalent (8c) positions. An ordered low-temperature phase (β-Ca₃(BN₂)₂) was prepared and found to crystallize in the orthorhombic system (space group: Cmca) with lattice parameters: , , and . Structure refinements on the basis of X-ray powder data have revealed that orthorhombic β-Ca₃(BN₂)₂ corresponds to an ordered super-structure of cubic α-Ca₃(BN₂)₂. The space group Cmca assigned for β-Ca₃(BN₂)₂ is derived from by a group-subgroup relationship.DSC measurements and temperature-dependent in situ X-ray powder diffraction studies showed reversible phase transitions between β- and α-Ca₃(BN₂)₂ with transition temperatures between 215 and 240 °C.The structure Sr₃(BN₂)₂ was reported isotypic with α-Ca₃(BN₂)₂ () with one type of strontium ions being disordered over of equivalent (2c) positions. In addition, a primitive () structure has been reported for Sr₃(BN₂)₂. Phase stability studies on Sr₃(BN₂)₂ revealed a phase transition between a primitive and a body-centred lattice around 820 °C. The experiments showed that both previously published structures are correct and can be assigned as α-Sr₃(BN₂)₂ (, high-temperature phase), and β-Sr₃(BN₂)₂ (, low-temperature phase).A comparison of Ca₃(BN₂)₂ and Sr₃(BN₂)₂ phases reveals that the different types of cation disordering present in both of the cubic α-phases () have a directing influence on the formation of two distinct (orthorhombic and cubic) low-temperature phases.     

High-pressure synthesis of solid solutions between trigonal LiNiO2 and monoclinic Li[Li1/3Ni2/3]O2

High-pressure synthesis in an oxygen-rich atmosphere yields solid solutions between LiNiO₂ and Li₂NiO₃ over the whole concentration range. Structural characterization of the high-pressure oxides was performed using powder XRD, SEM analysis, IR spectroscopy, EPR spectroscopy at 9.23 and 115 GHz and magnetic susceptibility measurements. The crystal structure of Li[Li_xNi_1−x]O₂ ,, changes from trigonal R-3m to monoclinic C2/m at Li-to-Ni ratio of 2 (or ). The incorporation of Li into NiO₂-layers causes a decrease in the mean Li-O and Ni_1-xLi_x-O bond distance. Li and Ni ions in the mixed Ni_1-xLi_xO₂-layers display a tendency to order at a short length scale in such a way that mimics the Li_1/3Ni_2/3-arrangment of the end Li[Li_1/3Ni_2/3]O₂ composition. The charge distribution in these oxides proceeds via Ni³⁺ and Ni⁴⁺ ions.     

Disorder and phase transitions in oxyfluoride (NH4)3Ta(O2)2F4

Calorimetric, X-ray, dielectric and DTA under pressure measurements have been performed on oxyfluoride (NH₄)₃Ta(O₂)₂F₄. The succession of nonferroelectric phase transitions was found associated with the order-disorder processes. The comparative analysis tantalate with related niobate has revealed the important role of the central atom in the physical properties behavior, mechanism of structural distortions and barocaloric effect in oxyfluorides with the eight-coordinated anionic polyhedra.