Metal-free one-pot α-benzoxylation of benzylic alcohols with acids or aldehydes

A metal-free strategy has been developed for α-benzoxylation of benzylic alcohols with acids or aldehydes. The reaction proceeds via sequential oxidation and α-benzoxylation in one pot. Importantly, the reactions are performed in metal-free condition and utilize cheap aqueous TBHP as an oxidant, affording α-benzoxy ketones in moderate to good yields.     

Synthesis of rac-2′-(trimethylsilyl)isovaline: A novel silicon-containing α,α-dialkylated α-amino acid

An efficient, convenient, and reliable multi-step synthesis of rac-2′-(trimethylsilyl)isovaline (rac-3) that uses inexpensive reagents in all steps has been developed, starting from diethyl malonate (overall yield 28%). Compound rac-3 is the first α-ethylated α,α-dialkylated silicon-containing α-amino acid.     

Metal-free base-promoted sulfenylation for the synthesis of α-arylthio-α,β-unsaturated ketones

A new sulfenylation reaction has been established, stereoselectively affording 37 examples of α-arylthio-α,β-unsaturated ketones with generally good yields via a metal-free three-component reaction of α-thiocyanate ketones with diaryliodonium salts and 1,2-dicarbonyls. The reaction enabled multiple bond-forming events including C(sp²)–S formation to provide a high-efficient and practical method toward α-arylthio-α,β-unsaturated ketones. The reasonable mechanism for forming α-arylthio-α,β-unsaturated ketones was proposed.     

Facile synthesis of α, β-unsaturated esters through a one-pot copper-catalyzed aerobic oxidation-Wittig reaction

An efficient one-pot synthesis of α, β-unsaturated esters through the aerobic oxidation – Wittig tandem reaction of alcohols and phosphorous ylide is developed. This new method operates under mild reaction conditions, and uses CuI/TEMPO (TEMPO = 2,2,6,6-tetramethylpiperidine-N-oxyl) as co-catalyst and air (O₂) as the oxidant. It tolerates a wide range of functionalized benzylic alcohol and aliphatic alcohols.     

Refinement of α-CsB9O14 crystal structure

The structure of α-CsB₉O₁₄ was re-examined because the first determination corresponded to a poor reliability factor (12.9%). Single crystals were obtained by heating, melting and slow cooling a stoichiometric mixture (1:4) of β-Cs[B₅O₆(OH)₄]·2H₂O and H₃BO₃. This compound crystallizes in the non-centrosymmetric orthorhombic space group P222₁ (and not P4₁22) with the following parameters: a=8.732(2)Å, b=8.767(3)Å, c=15.736(4)Å, V=1204.6(6)ų, Z=4; after taking into consideration twinning, the structure was refined from 3188 reflections until R₁=0.0304. It consists of two infinite, interleaved three-dimensional boron-oxygen frameworks of the Fundamental Building Blocks formed by two B₃O₆ and one B₃O₇ groups; its shorthand notation is 9:∞³[(3:2Δ+T)+2(3:3Δ)] (Δ, triangle BO₃ and T, tetrahedron BO₄). Knowledge of the correct space group and the structure of α-CsB₉O₁₄ may help in the study of its physical properties, especially the non-linear optical ones.     

An access to α, β-unsaturated ketones via dual cooperative catalysis

A dual cooperative organocatalytic approach for the synthesis of α, β-unsaturated ketones is described. This one pot transformation is realized via a domino Knoevenagel-Michael-retro Michael reaction sequence. Various aliphatic ketones reacted smoothly with aromatic as well as aliphatic aldehydes in presence catalytic amount of Meldrum’s acid and bifunctional amine. The highlights of this protocol are the easy availability of catalysts, high selectivity, and functional group tolerance. The reaction proved to highly E-selective with no side products emanating from self-condensation, unlike the base-mediated reactions.     

Crystal Structure, Electric and Magnetic Properties of Layered Cobaltite β-NaxCoO2

The layered oxide thermoelectric material β-Na_0.67CoO₂ has been studied by powder neutron diffraction, electric and magnetic measurements. This compound includes an edge-sharing CoO₆ slab and a highly vacant Na⁺ sheet in a unit cell (space group symmetry C2/m, a=4.9023(4) Å, b=2.8280(2) Å, c=5.7198(6) Å and β=105.964(6)° at 300 K). The evaluated formal valence of cobalt ion, +3.33(1), is ascribed to the coexistence of Co³⁺ and Co⁴⁺ in the ratio 2:1. Polycrystalline β-Na_0.67CoO₂, a p-type thermoelectric material, exhibits metallic behavior of the electric resistivity below 300 K. The Curie-Weiss-type magnetic susceptibility indicates antiferromagnetic interactions between magnetic cobalt ions in the edge-sharing CoO₆ slab.     

Enantioselective α-chlorination of β-keto esters and amides catalyzed by chiral imidodiphosphoric acids

Chiral imidodiphosphoric acids were employed as catalysts for the enantioselective α-chlorination of β-keto esters and amides using NCS as the chlorine source, providing a series of optically active products with good to high enantioselectivities (74–95% ee) and excellent yields (92–99%). This represents the first report of the Brønsted acid catalyzed enantioselective α-chlorination of cyclic β-keto derivatives.     

Synthesis of dipyrrolo[2,3-a:1′,2′,3′-fg]acridin-12(1H)-ones

Acylation reactions of 4,6-dimethoxyindoles with glyoxyloyl chlorides were achieved by the use of graphite powder in 1,2-dichloroethane at reflux. The products were monoketones as a result of decarbonylation, rather than the expected 1,2-diketones. Treatment of these monoketones with base led to their cyclisation and elimination of methanol to afford the novel dipyrrolo[2.3-a:1′,2′,3′-fg]acridin-12(1H)-ones.     

Phase transition induced by lithium insertion in αI- and αII-VOPO4

Lithium insertion in α_I-VOPO₄ and α_II-VOPO₄, either by chemical or electrochemical route, leads to the same new compound: α_I-LiVOPO₄ (space group P4/nmm). The structure, resolved by neutron and synchrotron diffraction, is made up of planes of corner-connected PO₄ and VO₅ polyhedra, whereas lithium atoms are located between the layers. The reversal of the short vanadyl bond that corresponds to the insertion-induced α_II-α_I transition finds an explanation in terms of lattice energy. It favors the migration of lithium ions in the (0 0 1) interlayer planes, a key parameter for the electrochemical performance as electrode material in Li-ion batteries.     

Crystal Structure and Magnetic Properties of SrCaMnGaO5+δ

The room-temperature crystal structure of the brownmillerite SrCaMnGaO_5+δ (δ=0.035) has been refined from neutron powder diffraction data; space group Ima2, a=15.7817(6), b=5.4925(2), c=5.3196(2)> Å. Mn and Ga occupy 99.0(2)% of the 6- and 4-coordinate sites, respectively. A combination of magnetometry, neutron diffraction and μSR spectroscopy has shown that the compound orders magnetically at 180 K, and that the low-temperature phase has a G-type antiferromagnetic structure, with an ordered magnetic moment of 3.30(2) μ_B per Mn at 2 K. Displaced hysteresis loops provide evidence that the atomic moment has an additional, glassy component. Magnetometry shows that significant short-range magnetic interactions persist above 180 K, and μSR that the spin fluctuations are thermally activated in this temperature region. The compound is an electrical insulator which at 159 K shows an unusually large magnetoresistance of 85% in 6 T, increasing to 90% in 13 T.     

Raman characterization of α- and β-LiFe5O8 prepared through a solid-state reaction pathway

Lithium ferrite, a mixed-inverse spinel of type A_xB_y[A_1−xB_1−y]O₄ was produced through solid state synthesis by calcining a Li₂CO₃/Fe₂O₃ mixture at 900 °C. The presence of both the ordered α-phase and disordered β-phase of LiFe₅O₈ was confirmed by XRD analysis, while formation of the latter was achieved by air quenching from high temperature. Laser Raman analysis was performed on both the α-LiFe₅O₈ and β-LiFe₅O₈ powders in order to achieve a reference set of Raman shifts for the spinel. The strongest, characteristic Raman peaks were determined to be 493, 382, 358, 300, and 263 cm⁻¹ for both phases while smaller peaks at 202 and 236 cm⁻¹ present in the α-phase were diminishing in intensity when the β-phase was present, thus providing unique identifiers for the presence of the disordered ferrite structure. SEM images taken of the synthesized LiFe₅O₈ powders showed particle sizes of less than 300 nm and an even particle size distribution.     

Impact of structural features on pigment properties of α-Fe2O3 haematite

Various α-Fe₂O₃ haematite samples were synthesized by precipitation routes (under standard or hydrothermal conditions) followed by thermal treatments under air. The trigonal distortion (C_3v point group) of the Fe³⁺ octahedral sites, which depends on the synthesis route and thermal treatment, was investigated by X-ray diffraction, Mössbauer spectroscopy and visible-near infrared (Vis-NIR) spectroscopy. The correlation between diffuse reflectance spectra and structural features of the haematite samples is reported and discussed herein. The slight increase of the average distortion of the Fe³⁺ octahedral sites, which depends on the annealing temperature of the precipitated sample, directly linked to the crystallite size, contrasts with the larger reduction of the sites distortion for the compound prepared by hydrothermal route due to the occurrence of hydroxyl groups substituted for O²⁻ anions as well as Fe³⁺ cationic vacancies. On a local point of view, as shown by Mössbauer spectroscopy, the Fe³⁺ octahedral sites distortion decreases from the centre towards the surface of the grains. Then the smaller the grain size, the lower the average site distortion. Finally, the reduction of the octahedral distortion was directly correlated to the two FeO charge transfer bands in the visible range and the colour of as-prepared haematites.     

Effects of surfactants on morphology in synthesis of α-Mn2O3 nanostructures

Cubic and chain-like structure of α-Mn₂O₃ with a high surface area was prepared by air oxidation of manganese chloride through sol process by adding hexamine and mercaptosuccinic acid as wetting agent, respectively. The as-synthesized products were characterized with X-ray powder diffraction (XRD), Energy Dispersive X-ray spectroscopy (EDX), transmission electron microscope (TEM), and selected area electron diffraction (SAED). The possible formation mechanism of α-Mn₂O₃ cubic and chain-like nanostructures has been proposed and discussed.     

Synthesis and Luminescence Properties of Barium Fluorotungstate Phosphors

TheluminescenceandenergytransferoftUngstatesarewellknownforalongtimeandwasreviewedbyBlassell].ButbariumtUngstateshowonlyweakluminescenceevendowntoliquidheliumtemperatureI'1.WeweresurprisedtofmdthatBa2Wo3F4isanefficientphosphorwhichcanbepracticallyused.lnthispaper,thepreparationmethodandluminescencepropertiesofBa2Wo3F4phosphorwereinvestigated.TherelationshipbetWeentheluminescentpropertiesandcrystaIstTUctUrewasdiscussed.=EXPERIMENTALThesampleswerepreparedbysolidstatereactionfrommixtur…     

SiCl4-catalyzed/PR3-mediated β-C(sp3)−H functionalization of nitrones to α,β-unsaturated imines and aromatic heterocycles

A novel method of SiCl₄-catalyzed/PR₃-mediated β-C(sp³)?H functionalization of nitrones with aldehydes/ketones to α,β-unsaturated imines was developed. The synthesis of α,β-unsaturated imines mainly invovles deoxygenation and aldol condensation, each proceeding under a cooperation effect between Lewis acid and Lewis base. In addition, both the acidity and hydrolytic stability of the weak SiCl₄ were supposed to be enhanced by coordination with phosphine oxide (R?=?Et) or phosphoric triamide (R?=?NMe₂) that originated from deoxygenation of nitrones by PR₃. In the case of 6-membered nitrone, a [1,3]-hydride shift within the resulted α,β-unsaturated imines renders the aromatization leading to 3,5-dialkylpyridines.     

Bioactive Properties of Chitin/Chitosan—Calcium Phosphate Composite Materials

Calcium phosphate coating over phosphorylated derivatives of chitin/chitosan material was produced by a process based on phosphorylation, Ca(OH)₂ treatment and SBF (simulated body fluid solution) immersion. Chitin/chitosan phosphorylated using urea and H₃PO₄ and then soaked in saturated Ca(OH)₂ solution at ambient temperature, which lead to the formation of thin coatings formed by partial hydrolysis of the PO₄ functionalities, were found to stimulate the growth of a calcium phosphate coating on their surfaces after soaking in 1.5 × SBF solution for as little as one day. The Ca(OH)₂ treatment facilitates the formation of a calcium phosphate precursor over the phosphorylated chitin/chitosan, which in turn encourages the growth of a calcium deficient apatite coating over the surface upon immersion in SBF solution. The bio-compatibility of calcium phosphate compound—chitin/chitosan composite materials was evaluated by cell culture test using L-929 cells. The initial anchoring ratio and the adhesive strength of L-929 cells for composites was higher than that for the polystyrene disk (LUX, control). The results of in-vitro evaluation suggested that the calcium phosphate—chitin/chitosan composite materials were suitable for cell carrier materials.     

Polymorphism in PbBiOXO4 compounds (X=V, P, As). Part I: Crystal structures of α- and β-PbBiOVO4

Reinvestigation of PbBiOVO₄ thermal behaviour revealed a phase transition. As shown by single-crystal X-ray diffraction and high-resolution neutron powder diffraction, α-PbBiOVO₄ transforms to β-PbBiOVO₄ at 550 °C. At 25 °C, α-PbBiOVO₄ is triclinic, S.G. P-1, Z=2, with a=5.6088(3), b=7.1109(3), c=7.2978(3) Å, α=108.957(2), β=111.889(2), and γ=94.833(2)°. Above 550 °C, β-PbBiOVO₄ is monoclinic, S.G. C2/m, Z=4, with a=13.61(1), b=5.64(1), c=7.18(1) Å, and β=113.75(1)°. Both structures are built upon (O₂Bi₂Pb₂)_∞ chains parallel to the [100] direction in the α polymorph and [001] in the β-polymorph. These chains are undulated in α and linear in β. In both structures, VO₄ tetrahedra are organized in two sets of rows parallel to (O₂Bi₂Pb₂)_∞ chains, thus building layers of (OBiPb) sandwiched by two layers of VO₄ oriented head to tail; VO₄ displays different orientations in α- and β-PbBiOVO₄.