Ferroelectric phase transition in Ga2Te3 single crystals

Measurements of the electrical conductivity and Hall effect were carried out in a wide temperature range (200-500 K) for Ga₂Te₃ crystals. The crystals were grown in single crystalline form by making a modification of the travelling heater method technique. The measurements revealed unusual observations in the electric conductivity and Hall mobility indicating the presence of some type of phase transitions at about 430 K. So, ferroelectric behavior was examined for confirming the presence of second-order (ferroelectric) phase transition. An energy gap of 1.21 eV and depth of the impurity center of 0.11 eV were found.     

Electronic structures of mixed ionic-electronic conductors SrCoOx

Electronic structures of SrCoO_x with x=3, 2.875 and 2.75 were calculated by DFT technique in SLDA approximation. Two kinds of oxygen vacancy ordering with energies of 0.22 and 0.01 eV lower in comparison with random vacancy distribution were revealed. The transition between these ordered vacancy systems with the activation energy 0.34 eV can be a step in the ionic conductivity mechanism. The calculated ion charges, magnetic moments and electron density of states were used to analyze chemical bonding in the crystals. All calculated compounds have metal electronic conductivity.     

Growth and optical properties of Eu/Li-co-doped SrB4O7 single crystals

This paper reports the growth and optical properties of Eu²⁺/Li⁺-co-doped SrB₄O₇ single crystals. High-quality Eu,Li:SrB₄O₇ crystals without macro-defects or cracks were grown using the top-seeded solution growth (TSSG) method. The absorption and luminescent properties were measured and different spectra were observed in the as-grown crystals. As the doping amount of lithium increases, the absorption peak at 300 nm becomes stronger and the emission peak shifts to a longer wavelength. This phenomenon could be attributed to the doping lithium ions, which might affect the electric field distribution in the lattice structure.     

Dielectric and AC conductivity behavior of BaBi2Nb2O9 ceramics

The complex dielectric and AC conductivity response of BaBi₂Nb₂O₉ relaxor ferroelectric ceramics were studied as a function of frequency (100 Hz-10 MHz) at various temperatures. The observed dielectric behavior was characterized by two types of relaxation processes which were described by the ‘universal relaxation law’. The frequency dependence of conductivity which showed a classical relaxor behavior followed the Jonscher's universal law σ(ω)=σ₀+Aωⁿ. The exponent n exhibited a minimum in the vicinity of temperatures of dielectric anomaly while the pre-factor A showed a maximum. The temperature dependence of n followed the Vogel-Fulcher relation with activation energy of about 0.14 eV.     

High-conductive nanocrystalline silicon with phosphorous and boron doping

Intrinsic, P- and B-doped hydrogenated amorphous silicon thin films were prepared by plasma-enhanced chemical vapor deposition technique. As-deposited samples were thermally annealed at the temperature of 800 °C to obtain the doped nanocrystalline silicon (nc-Si) films. The microstructures, optical and electronic properties have been evaluated for the undoped and doped nanocrystalline films. X-ray photoelectron spectroscopy (XPS) measurements demonstrated the presence of the substitutional boron and phosphorous in the doped films. It was found that thermal annealing can efficiently activate the dopants in films accompanying with formation of nc-Si grains. Based on the temperature-dependent conductivity measurements, it was shown that the activation of dopant by annealing increased the room temperature dark conductivity from 3.4 × 10⁻⁴ S cm⁻¹ to 5.3 S cm⁻¹ for the P-doped films and from 1.28 × 10⁻³ S cm⁻¹ to 130 S cm⁻¹ for the B-doped films. Meanwhile, the corresponding value of conductivity activation energies was decreased from 0.29 eV to 0.03 eV for the P-doped films and from 0.3 eV to 5.6 × 10⁻⁵ eV for the B-doped films, which indicated the doped nc-Si films with high conductivity can be achieved with the present approach.     

Optical, thermal, dielectric and ferroelectric behaviour of sodium acid phthalate (SAP) single crystals

Sodium acid phthalate (SAP), an efficient semi-organic crystal having dimensions 17×8×2 mm³ has been grown from aqueous solution by slow evaporation technique at room temperature within the period of 2 weeks. The lattice parameters of the grown crystals were determined using single-crystal X-ray diffraction analysis. The presence of functional groups was estimated qualitatively by Fourier transform infrared (FTIR) analysis. The band gap energy was determined using optical absorption studies. The TG/DTA analysis reveals that the SAP crystal is thermally stable up to 141.6 °C. The dielectric constant and dielectric loss was studied as a function of frequency and the corresponding activation energy (E_a) has been calculated for the grown crystal. Scanning electron microscope studies enunciate the ferroelectric domain patterns of the SAP crystal. Ferroelectric property of the grown crystal was confirmed by hysteresis loop studies.     

Energy levels in doped SiGe quantum well studied by admittance spectroscopy

SiGe/Si quantum wells (QWs) with different Boron doping concentrations were grown by molecular beam epitaxy (MBE) on p-type Si(1 0 0) substrate. The activation energies of the heavily holes in ground states of QWs, which correspond to the energy differences between the heavy hole ground states and Si valence band, were measured by admittance spectroscopy. It is found that the activation energy in a heavily doped QW increases with doping concentration, which can be understood by the band alignment changes due to the doping in the QWs. Also, it is found that the activation energy in a QW with a doping concentration of 2 × 10²⁰ cm⁻³ becomes larger after annealing at a temperature of 685 °C, which is attributed to more Boron atoms activation in the QW by annealing.     

Decoupling of the order-disorder and displacive contributions to the phase transition in NH4H(ClH2CCOO)2

The effects of hydrostatic pressure and substitution of Rb⁺for the ammonium cations on the ferroelectric phase transition temperature in NH₄H(ClH₂CCOO)₂ have been studied by electric permittivity measurements. The transition temperature (T_c) decreases with increasing pressure up to 800 MPa and the pressure coefficient dT_c/dp=−1.4×10⁻² [K/MPa] has been experimentally determined. The substitution of Rb⁺ for the ammonium cations has been shown to considerably lower the ferroelectric phase transition temperature T_c. In mixed crystals, additional electric permittivity anomaly has been clearly evidenced. The results are discussed assuming a model, which combines polarizability effects, related to the heavy ion units, with the pseudo-spin tunnelling.     

Studies of the electrical properties of nearly perfect K2ZnCl4 single crystals as measured during commensurate incommensurate-paraelectric phase transitions

Electrical conductivity and dielectric measurements were carried in the temperature range covering the commensurate ferroelectric-incommensurate-paraelectric normal phases (300-600 K) for the three main crystallographic axes of K₂ZnCl₄ single crystals. The values of activation energies in the three phases were calculated and discussed. A thermal hysteresis of about 12 K is observed which deduce the presence of first order transition for the lock-in ferroelectric transition at T_c=404 K. Conductivity anomalies were observed in both ferroelectric and paraelectric phases. The conduction mechanism was discussed. The suggested occurrence of discommensuration in K₂ZnCl₄ crystals upon the lock-in transition in contrast with conductivity and dielectric results explains the anomalous behavior for the b-axis measurements. The orientation of these discommensuration was discussed on a view of projection in the three standard crystallographic directions.     

Chemical spray pyrolysis deposition and characterization of p-type CuCr1−xMgxO2 transparent oxide semiconductor thin films

A chemical spray pyrolysis technique for deposition of p-type Mg-doped CuCrO₂ transparent oxide semiconductor thin films using metaloorganic precursors is described. As-deposited films contain mixed spinel CuCr₂O₄ and delafossite CuCrO₂ structural phases. Reduction in spinel CuCr₂O₄ fraction and formation of highly crystalline films with single phase delafossite CuCrO₂ structure is realized by annealing at temperatures ?700 °C in argon. A mechanism of synthesis of CuCrO₂ films involving precursor decomposition, oxidation and reaction between constituent oxides in the spray deposition process is presented. Post-annealed CuCr_0.93Mg_0.07O₂ thin films show high (?80%) visible transmittance and sharp absorption at band gap energy with direct and indirect optical band gaps 3.11 and 2.58 eV, respectively. Lower (∼450 °C) substrate temperature formed films are amorphous and yield lower direct (2.96 eV) and indirect (2.23 eV) band gaps after crystallization. Electrical conductivity of CuCr_0.93 Mg_0.07O₂ thin films ranged 0.6-1 S cm⁻¹ and hole concentration ∼2×10¹⁹ cm⁻³ determined from Seebeck analysis. Temperature dependence of conductivity exhibit activation energies ∼0.11 eV in 300-470 K and ∼0.23 eV in ?470 K region ascribed to activated conduction and grain boundary trap assisted conduction, respectively. Heterojunction diodes of the structure Au/n-(ZnO)/p-(CuCr_0.93Mg_0.07O₂)/SnO₂ (TCO) were fabricated which show potential for transparent wide band gap junction device.     

Crystal growth and dielectric, mechanical, electrical and ferroelectric characterization of n-bromo succinimide doped triglycine sulphate crystals

Single crystals of triglycine sulphate (TGS) doped with n-bromo succinimide (NBS) were grown at ambient temperature by the slow evaporation technique. An aqueous solution containing 1-20 mol% of n-bromo succinimide as dopant was used for the growth of NBSTGS crystals. The incorporation of NBS in TGS crystals has been qualitatively confirmed by FTIR spectral data. The effect of the dopant on morphology and crystal properties was investigated. The cell parameters of the doped crystal were determined by the powder X-ray diffraction technique. The dielectric constant of NBS doped TGS crystal was calculated along the ferroelectric direction over the temperature range of 30-60 °C. The dielectric constant of NBSTGS crystals decrease with the increase in NBS concentration and considerable shift in the phase transition temperature (T_C) towards the higher temperature observed. Pyroelectric studies on doped TGS were carried out to determine the pyroelectric coefficient. The emergence of internal bias field due to doping was studied by collecting P-E hysteresis data. Temperature dependence of DC conductivity of the doped crystals was studied and gradual increase in the conductivity with the increase of dopant concentration was observed. The activation energy (ΔE) calculated was found to be lower in both the ferroelectric and the paraelectric phases for doped crystals compared to that of pure TGS. The micro-hardness studies were carried out at room temperature on thin plates cut perpendicular to the b-axis. Less doped TGS crystals show higher hardness values compared to pure TGS. Piezoelectric measurements were also carried out on 010 plates of doped TGS crystals at room temperature.     

Solid state electrical conductivity and thermal degradation studies on some phenothiazine derivatives

Electrical conductivity and thermal degradation studies of promethazine hydrochloride (PH); 2-chlorophenothiazine (CP); diethazine hydrochloride (DH) and trifluoperazine dihydrochloride (TFP) are reported. The activation energies are evaluated based on their electrical conductivity study conducted over the temperature range 30-150 °C. These energies for PH, CP, DH and TFP are found to be 0.86, 1.02, 0.68 and 1.08 eV, respectively. The materials are analyzed for the kinetic parameters like the activation energies for decomposition and the Arrhenious pre-exponential factors in their pyrolysis region using Broido's, Coats-Redfern and Horowitz-Metzger methods. Using these factors and the standard equations thermodynamic parameters such as enthalpy, entropy and free energies are calculated. Thermogravimetric study on these phenothiazine derivatives in air indicated that their stabilities are in the order CP>TFP>PH >DH.     

Molecular materials derived from MPc (M=Fe, Pb, Co) and 1,8-dihydroxiantraquinone thin films: Formation, electrical and optical properties

Semiconductor-like thin films were grown using metallic phthalocyanines (MPc) (M=Fe, Pb, Co) and 1,8 dihydroxiantraquinone as initial compounds. The morphology of the deposited films was studied by using scanning electron microscopy and atomic force microscopy. The powder and thin-film samples of the synthesized materials, deposited by vacuum thermal evaporation, showed the same intra-molecular bonds as in IR spectroscopy studies, which suggests that the evaporation process does not alter these bonds. The optical band gap values of C₆₀H₂₈N₈O₈Fe, C₆₀H₂₈N₈O₈Pb and C₆₀H₂₈N₈O₈Co calculated from the absorption coefficient were found to be 1.60, 1.89 and 1.75 eV, respectively, arising from non-direct transitions. The effect of temperature on conductivity was also measured in these samples. It was found that the temperature-dependent electric current in all cases showed a semiconductor behavior with conductivities in the order of 10⁻⁶ Ω⁻¹ cm⁻¹ where the highest value corresponded to the cobalt material. The linear dependence observed in the films implies only one type of conduction mechanism in all cases, with mean activation energies of the order of 1.55, 1.77 and 1.50 eV for iron, lead and cobalt-based thin films, respectively.     

Electron hopping mechanism in hematite (α-Fe2O3)

The frequency dependence of the real (?′) and imaginary (?″) parts of the dielectric constant of polycrystalline hematite (α-Fe₂O₃) has been investigated in the frequency range 0-100 kHz and the temperature range 190-350 K, in order to reveal experimentally the electron hopping mechanism that takes place during the Morin transition of spin-flip process. The dielectric behaviour is described well by the Debye-type relaxation (α-dispersion) in the temperature regions T<233 K and T>338 K. In the intermediate temperature range 233 K<T<338 K a charge carrier mechanism takes place (electron jump from the O²⁻ ion into one of the magnetic ions Fe³⁺) which gives rise to the low frequency conductivity and to the Ω-dispersion. The temperature dependence of relaxation time (τ) in the −ln τ vs 10³/T plot shows two linear regions. In the first, T<238 K, τ increases with increasing T implying a negative activation energy −0.01 eV, and in the second region T>318 K τ decreases as the temperature increases implying a positive activation energy 0.12 eV. The total reorganization energy (0.12-0.01) 0.11 eV is in agreement with the adiabatic activation energy 0.11 eV given by an ab initio model in the literature. The temperature dependence of the phase shift in the frequencies 1, 5, 10 kHz applied shows clearly an average Morin temperature T_Mo=284±1 K that is higher than the value of 263 K corresponding to a single crystal due to the size and shape of material grains.     

Evidence for fast decay dynamics of the photoluminescence from Ge nanocrystals embedded in SiO2

We have investigated the origin of room temperature photoluminescence from ion-beam synthesized Ge nanocrystals (NCs) embedded in SiO₂ using steady state and time-resolved photoluminescence (PL) measurements. Ge NCs of diameter 4-13 nm were grown embedded in a thermally grown SiO₂ layer by Ge⁺ ion implantation and subsequent annealing. Steady state PL spectra show a peak at ∼2.1 eV originating from Ge NCs and another peak at ∼2.3 eV arising from ion-beam induced defects in the SiO₂ matrix. Time-resolved PL studies reveal double exponential decay dynamics on the nanoseconds time scale. The faster component of the decay with a time constant τ₁∼3.1 ns is attributed to the nonradiative lifetime, since the time constant reduces with increasing defect density. The slower component with time constant τ₂∼10 ns is attributed to radiative recombination at the Ge NCs. Our results are in close agreement with the theoretically predicted radiative lifetime for small Ge NCs.     

Growth and characterization of pure and potassium iodide-doped zinc tris-thiourea sulphate (ZTS) single crystals

Single crystals of pure and potassium iodide (KI)-doped zinc tris-thiourea sulphate (ZTS) were grown from aqueous solutions by the slow evaporation method. The grown crystals were transparent. The lattice parameters of the grown crystals were determined by the single-crystal X-ray diffraction technique. The grown crystals were also characterized by recording the powder X-ray diffraction pattern and by identifying the diffracting planes. The FT-IR spectrum was recorded in the range 400-4500 cm⁻¹. Second harmonic generation (SHG) was confirmed by the Kurtz powder method. The thermo gravimetric analysis (TGA) and differential thermal analysis (DTA) studies reveal that the materials have good thermal stability. Atomic absorption studies confirm the presence of dopant in ZTS crystals. The electrical measurements were made in the frequency range 10²-10⁶ Hz and in the temperature range 40-130 °C along a-, b- and c-directions of the grown crystals. The present study shows that the electrical parameters viz. dc conductivity, dielectric constant, dielectric loss factor and ac conductivity increase with increase in temperature. Activation energy values were also determined for the ac conduction process in grown crystals. The dc conductivity, dielectric constant, dielectric loss factor and ac conductivity of KI-doped ZTS crystal were found to be more than those of pure ZTS crystals.     

Electrical and thermal studies in the commensurate incommensurate phase region of (NH4)2ZnCl4 single crystal

DC electrical conductivity for a virgin and poled annealed (NH₄)₂ZnCl₄b-axis single crystal shows a defect controlled property. A Schottky mechanism is a probable mechanism of conduction in regions of strong structural transitions. The rise of conductivity in the incommensurate and paraelectric phases is linked to an increase in discommensurations density. The activation energies (ΔE) in the three phases region were calculated. DTA measurements shows that the crystal is stable up to 200 °C and the phase transition temperatures were observed at 42, 94.8 and 137 °C. The effective activation energy (E_e) was obtained using Kissinger and Mahadevan equations. It was found to be equal to 0.49 eV. This correlates with the value obtained through DC conductivity.     

Electrical conductivities of the Ag6PS5X and the Cu6PSe5X (X=Br, I) argyrodites

The Ag₆PS₅Br and Ag₆PS₅I argyrodites crystallize in a face-centered-cubic lattice at room temperature. Both compounds exhibit purely Arrhenius behavior throughout the temperature range 150-400 K with similar activation energies of about 0.23 eV. Cu₆PSe₅Br and Cu₆PSe₅I also crystallize in a face-centered-cubic structure at room temperature. Cu₆PSe₅Br exhibits a distinctive anomaly in electrical conductivity near 286 K while Cu₆PSe₅I undergoes a first-order electrical phase transition near 265 K. Their activation energies above room temperature are 0.13 and 0.30 eV, respectively.     

Equivalent electric circuit analyses of ionic thermocurrent in sodium-doped CaF2 crystals

The characteristics of high-temperature ionic thermocurrent (HT ITC) in CaF₂ doped with different sodium concentrations were studied by the Teflon-insulated electrode ITC method. It was shown that, with increasing sodium concentration, the HT ITC band moved toward a Na⁺-F_V dipole band with a peak at 162 K. The results of analyses of the HT ITC spectra using an equivalent electric circuit proved that the activation energy of space charge migration related to HT ITC was also strongly dependent on the doped sodium concentrations if varied from 0.94 to 0.46 eV with increasing sodium concentration in our ITC study. In addition, the broadening of the Na⁺-F_V dipole band was observed in 3 nominal mole% NaF-doped CaF₂, which was accompanied by a considerable decrease of the activation energy from 0.46 to 0.29 eV without showing marked temperature shifts of the peak ITC bands.     

Crystal structure,NMR study,dielectric relaxation and AC conductivity of a new compound [Cd3(SCN)2Br6(C2H9N2)2]n

The crystal structure, the ¹³C NMR spectroscopy and the complex impedance have been carried out on [Cd₃(SCN)₂Br₆(C₂H₉N₂)₂]_n. Crystal structure shows a 2D polymeric network built up of two crystallographically independent cadmium atoms with two different octahedral coordinations. This compound exhibits a phase transition at (T=355±2 K) which has been characterized by differential scanning calorimetry (DSC), X-rays powder diffraction, AC conductivity and dielectric measurements. Examination of ¹³C CP/MAS line shapes shows indirect spin–spin coupling (¹⁴N and ¹³C) with a dipolar coupling constant of 1339 Hz. The AC conductivity of this compound has been carried out in the temperature range 325–376 K and the frequency range from 10⁻² Hz to 10 MHz. The impedance data were well fitted to two equivalent electrical circuits. The results of the modulus study reveal the presence of two distinct relaxation processes. One, at low frequency side, is thermally activated due to the ionic conduction of the crystal and the other, at higher frequency side, gradually disappears when temperature reaches 355 K which is attributed to the localized dipoles in the crystal. Moreover, the temperature dependence of DC-conductivity in both phases follows the Arrhenius law and the frequency dependence of σ(ω,T) follows Jonscher's universal law. The near values of activation energies obtained from the conductivity data and impedance confirm that the transport is through the ion hopping mechanism.