载有C60的TiO2纳米粒子光催化活性

以水溶性C₆₀和TiO₂粒子为前驱体,采用水热法制备了载有C₆₀的锐钛矿型TiO₂纳米粒子。应用X射线衍射、透射电子显微镜、红外光谱、紫外-可见漫反射光谱、荧光光谱对产物进行了表征。以对-硝基苯酚为模型污染物研究了产物的光催化活性,结果表明适量负载C₆₀可以提高TiO₂纳米粒子的光催化活性,C₆₀起着传输电子、促进TiO₂光生载流子分离的作用,且经7次循环使用后对-硝基苯酚的降解效率仍能达到74%。讨论了载有C₆₀的TiO₂纳米粒子光催化降解对-硝基苯酚的机理。     

双介孔结构的纳米TiO2/I2复合材料的制备及其可见光催化性能

以钛酸丁酯为前驱体, 碘溶胶为碘源, 在室温下采用水解沉淀法制备了单质碘和纳米TiO₂复合的双介孔结构光催化剂(M-I₂-TiO₂). 采用X射线衍射(XRD)、透射电子显微镜(TEM)、比表面分析(BET)、紫外-可见(UV-Vis)漫反射光谱和傅里叶变换-红外光谱(FT-IR)对M-I₂-TiO₂进行了表征. 以次甲基蓝(MB)溶液为模拟废水, 对M-I₂-TiO₂的光催化性能进行了评价, 研究了不同热处理温度对光催化活性的影响. 结果表明, M-I₂-TiO₂在可见光区有显著的吸收, 300 ℃热处理得到的样品比表面积高达227.6 m²/g, 600 ℃热处理所得样品的比表面积仍高达111.8 m²/g, 而400 ℃热处理所得样品具有最好的光催化降解性能. 双介孔结构纳米TiO₂/I₂复合材料的光催化降解性能显著高于相同方法制备的纯TiO₂和Degussa P-25商业产品. 催化剂经6次重复使用其光催化活性基本保持不变.     

Fe2BiTaO7纳米催化剂的组织结构及光催化性能

用固相反应合成法合成了光催化剂Fe₂BiTaO₇,通过XRD、SEM、TEM、紫外-可见漫反射等表征方法对其组织结构及光催化性能进行了研究.结果表明Fe₂BiTaO₇为立方晶系烧绿石结构,空间群为Fd₃m,禁带宽度为1.72eV.通过比较Fe₂BiTaO₇、P₂₅TiO₂、掺氮TiO₂和Bi₂InTaO₇的可见光光催化降解罗丹明B,发现Fe₂BiTaO₇降解效果及催化活性均高于其它催化剂,并且Fe₂BiTaO₇降解罗丹明B效率是掺氮二氧化钛的1.5倍.Fe₂BiTaO₇降解罗丹明B的曲线符合一级动力学,一级动力学常数为0.02293 min^-1.研究了罗丹明B可能的降解路径和Fe₂BiTaO₇在可见光下降解苯酚的效果.Fe₂BiTaO₇(可见光)光催化剂系统适用于纺织工业废水处理.     

Fe2BiTaO7纳米催化剂的组织结构及光催化性能

用固相反应合成法合成了光催化剂Fe2BiTaO7,通过XRD、SEM、TEM、紫外-可见漫反射等表征方法对其组织结构及光催化性能进行了研究。结果表明Fe2BiTaO7为立方晶系烧绿石结构,空间群为Fd3m,禁带宽度为1.72 e V。通过比较Fe2BiTaO7、P25TiO2、掺氮Ti O2和Bi2In Ta O7的可见光光催化降解罗丹明B,发现Fe2BiTaO7降解效果及催化活性均高于其它催化剂,并且Fe2BiTaO7降解罗丹明B效率是掺氮二氧化钛的1.5倍。Fe2BiTaO7降解罗丹明B的曲线符合一级动力学,一级动力学常数为0.022 93 min-1。研究了罗丹明B可能的降解路径和Fe2BiTaO7在可见光下降解苯酚的效果。Fe2BiTaO7(可见光)光催化剂系统适用于纺织工业废水处理。     

Reactions of the dications C7H6, C7H7, and C7H8 with methane: Predominance of doubly charged intermediates

The reactions of methane with the dications C₇H₆²⁺, C₇H₇²⁺, and C₇H₈²⁺ generated by electron ionization of toluene are studied using mass-spectrometry tools. It is shown that the reactivity is dominated by the formation of doubly charged intermediates, which can either eliminate molecular hydrogen to yield doubly charged products or undergo charge-separation reactions leading to the formation of a methyl cation and the corresponding C₇H_n+1⁺ monocation. Typical processes observed for dications, like electron transfer or proton transfer, are largely suppressed. The theoretically derived mechanism of the reaction between C₇H₆²⁺ and CH₄ indicates that the formation of the doubly charged intermediate is kinetically preferred at low internal energies of the reactants. In agreement, the experimental results show a pronounced hydrogen scrambling and dominant formation of the doubly charged products at low collision energies, whereas direct hydride transfer prevails at larger collision energies.     

光催化剂Sm2FeSbO7的制备及光物理和光催化性能表征

首次采用固相反应法制备了新型光催化剂Sm₂FeSbO₇,有效地降解了水中有机污染物。利用X射线衍射、扫描电镜、X射线光电子能谱、傅里叶变换红外光谱、透射电子显微镜和紫外－可见光谱仪对Sm₂FeSbO₇的结构和光催化性能进行了表征。Sm₂FeSbO₇为烧绿石型结构,立方晶系和空间群Fd3m结晶。Sm₂FeSbO₇的晶格参数a为1.035 434 nm。Sm₂FeSbO₇的带隙经估算为2.46 eV。用Sm₂FeSbO₇作为光催化剂在可见光照射下降解靛蓝胭脂红,并与氮掺杂TiO₂对比。结果表明,与掺氮TiO₂相比,Sm₂FeSbO₇在可见光照射下光催化降解靛蓝胭脂红显示出较高的光催化活性。总有机碳的减少,无机产物的逐渐形成,SO₄^2-和NO₃^-以及CO₂的演变揭示了在光催化过程中靛蓝胭脂红的连续矿化。检测了一些来自光催化降解靛蓝胭脂红的中间体,如邻硝基苯甲酸和邻硝基苯甲醛,并获得了可能的靛蓝胭脂红光催化降解路径。     

Vapour-liquid equilibrium data for the systems C2H6 + N2, C2H4 + N2, C3H8 + N2, and C3H6 + N2

High pressure vapour-liquid equilibrium data for the C₂H₆ + N₂, C₂H₄ + N₂, C₃H₈ + N₂, and C₃H₆ + N₂ systems are presented. The data are obtained isothermally in the range from 200 K to 290 K. For each point of data, temperature, pressure and liquid and vapour phase mole fractions are measured.Values for the vapour phase mole fractions are calculated from the obtained pressure, temperature and liquid phase mole fractions. The calculated values are compared with the experimental results, and it is found that the average mean deviation between calculated and experimental mole fractions is less than 0.009 for the systems considered in this work.     

光催化剂Sm2FeSbO7的制备及光物理和光催化性能表征

首次采用固相反应法制备了新型光催化剂Sm₂FeSbO₇,有效地降解了水中有机污染物。利用X射线衍射、扫描电镜、X射线光电子能谱、傅里叶变换红外光谱、透射电子显微镜和紫外-可见光谱仪对Sm₂FeSbO₇的结构和光催化性能进行了表征。Sm₂FeSbO₇为烧绿石型结构,立方晶系和空间群Fd3m结晶。Sm₂FeSbO₇的晶格参数a为1.035 434 nm。Sm₂FeSbO₇的带隙经估算为2.46 eV。用Sm₂FeSbO₇作为光催化剂在可见光照射下降解靛蓝胭脂红,并与氮掺杂TiO₂对比。结果表明,与掺氮TiO₂相比,Sm₂FeSbO₇在可见光照射下光催化降解靛蓝胭脂红显示出较高的光催化活性。总有机碳的减少,无机产物的逐渐形成,SO₄^2-和NO₃^-以及CO₂的演变揭示了在光催化过程中靛蓝胭脂红的连续矿化。检测了一些来自光催化降解靛蓝胭脂红的中间体,如邻硝基苯甲酸和邻硝基苯甲醛,并获得了可能的靛蓝胭脂红光催化降解路径。     

Effect of electrolysis conditions on photocatalytic activities of the anodized TiO2 films

Photocatalytic activities of anodized TiO₂ films for decomposition of gaseous acetaldehyde were investigated. The anodized TiO₂ films were fabricated by galvanostatic anodization in a mixed electrolyte composed of H₂SO₄, H₃PO₄, and H₂O₂. Pre-nitridation treatment effectively enhanced the photocatalytic activity of the anodized TiO₂ films. The electrolysis parameters such as anodization time, current density, electrolyte temperature, and electrolyte composition significantly affected the photocatalytic activity of the anodized TiO₂ films. The improvement of photocatalytic activity of the anodized films is attributed to increase in surface areas of the anodized specimens.     

静电自组装制备纳米TiO2/SiO2光催化材料

采用静电自组装方法制备了纳米TiO2/SiO2光催化材料。采用巯丙基三甲氧基硅烷偶联剂对SiO2进行干法改性,采用双氧水/冰醋酸将偶联剂巯基基团氧化为磺酸基基团。在正负电荷的吸引下,带负电荷的SiO2与带正电荷的钛聚合阳离子自发地组装在一起,经一定温度热处理得到纳米TiO2/SiO2光催化材料。采用XRD、FTIR、PL、UV-Vis DRS、SEM和ICP等对材料进行了分析和表征。采用甲基橙溶液评价材料的光催化性能。结果表明:SiO2促使锐钛矿的形成,抑制锐钛矿向金红石的转变,减小TiO2的晶粒尺寸,使得TiO2光吸收波长发生蓝移。TiO2与SiO2通过Si-O-Ti键发生结合。采用静电自组装方法制备的材料中TiO2的含量高于传统方法,导致材料的光催化性能有所提高。     

Synthesis and crystal structure of Ir(C2H4)2(C5H7O2)

We report a new synthesis and characterization of Ir(C₂H₄)₂(C₅H₇O₂) [(acetylacetonato)-bis(η²-ethene)iridium(I)], prepared from (NH₄)₃IrCl₆ · H₂O in a yield of about 45%. The compound has been characterized by X-ray diffraction crystallography, infrared, Raman, and NMR spectroscopies and calculations at the level of density functional theory. Ir(C₂H₄)₂(C₅H₇O₂) is isostructural with Rh(C₂H₄)₂(C₅H₇O₂), but there is a substantial difference in the ethylene binding energies, with Ir-ethylene having a stronger interaction than Rh-ethylene; two ethylenes are bound to Ir with a binding energy of 94 kcal/mol and to Rh with a binding energy of 70 kcal/mol.     

Conversion of NO in NO/N2, NO/O2/N2, NO/C2H4/N2 and NO/C2H4/O2/N2 Systems by Dielectric Barrier Discharge Plasmas

An experimental study on the conversion of NO in the NO/N₂, NO/O₂/N₂, NO/C₂H₄/N₂ and NO/C₂H₄/O₂/N₂ systems has been carried out using dielectric barrier discharge (DBD) plasmas at atmospheric pressure. In the NO/N₂ system, NO decomposition to N₂ and O₂ is the dominating reaction; NO conversion to NO₂ is less significant. O₂ produced from NO decomposition was detected by an on-line mass spectrometer. With the increase of NO initial concentration, the concentration of O₂ produced decreases at 298 K, but slightly increases at 523 K. In the NO/O₂/N₂ system, NO is mainly oxidized to NO₂, but NO conversion becomes very low at 523 K and over 1.6% of O₂. In the NO/C₂H₄/N₂ system, NO is reduced to N₂ with about the same NO conversion as that in the NO/N₂ system but without NO₂ formation. In the NO/C₂H₄/O₂/N₂ system, the oxidation of NO to NO₂ is dramatically promoted. At 523 K, with the increase of the energy density, NO conversion increases rapidly first, and then almost stabilizes at 93–91% of NO conversion with 61–55% of NO₂ selectivity in the energy density range of 317–550 J L⁻¹. It finally decreases gradually at high energy density. A negligible amount of N₂O is formed in the above four systems. Of the four systems studied, NO conversion and NO₂ selectivity of the NO/C₂H₄/O₂/N₂ system are the highest, and NO/O₂/C₂H₄/N₂ system has the lowest electrical energy consumption per NO molecule converted.     

(La0.8A0.2)MnO3 (A = Sr,K) perovskite catalysts for NO and C10H22 oxidation and selective reduction of NO by C10H22

In this work, we studied the catalytic activity of LaMnO₃ and (La_0.8A_0.2)MnO₃ (A = Sr, K) perovskite catalysts for oxidation of NO and C₁₀H₂₂ and selective reduction of NO by C₁₀H₂₂. The catalytic performances of these perovskites were compared with that of a 2 wt% Pt/SiO₂ catalyst. The La site substitution increased the catalytic properties for NO or C₁₀H₂₂ oxidation compared with the non-substituted LaMnO₃ sample. For the most efficient perovskite catalyst, (La_0.8Sr_0.2)MnO₃, the results showed the presence of two temperature domains for NO adsorption: (1) a domain corresponding to weakly adsorbed NO, desorbing at temperatures lower than 270 ℃ and (2) a second domain corresponding to NO adsorbed on the surface as nitrate species, desorbing at temperatures higher than 330 ℃. For the Sr-substituted perovskite, the maximum NO₂ yield of 80% was observed in the intermediate temperature domain (around 285 ℃). In the reactant mixture of NO/C₁₀H₂₂/O₂/H₂O/He, (La_0.8Sr_0.2)MnO₃ perovskite showed better performance than the 2 wt% Pt/SiO₂ catalyst： NO₂ yields reaching 50% and 36% at 290 and 370 ℃, respectively. This activity improvement was found to be because of atomic scale interactions between the A and B active sites, Sr²⁺ cation and Mn⁴⁺/Mn³⁺ redox couple. Thus, (La_0.8Sr_0.2)MnO₃ perovskite could be an alternative free noble metal catalyst for exhaust gas after treatment.     

Preparation of ZrO2-TiO2-CeO2 and Its Application in the Selective Catalytic Reduction of NO with NH3

TiO₂,ZrO₂-TiO₂,andZrO₂-TiO₂-CeO₂ were prepared by co-precipitation method and characterized by X-ray diffraction (XRD), specific surface area measurements (BET), temperature programmed desorption (NH₃-TPD), oxygen storage capacity (OSC), and temperature programmed reduction (H₂-TPR). The results showed that ZrO₂-TiO₂-CeO₂ exhibited large number of surface strong acid, possessed some oxygen storage capacity, and strong redox property. The three materials were used as supports and the monolith catalysts were prepared with 1% (w) V₂O₅ and 9% (w)WO₃ for selective catalytic reduction (SCR) of NO with ammonia in the presence of excessive O₂, and the results of catalytic activity showed that the catalyst used ZrO₂-TiO₂-CeO₂ as support yielded nearly 100% NO conversion at 275 °C at a gas hourly space velocity (GHSV) of 10000 h⁻¹, and it had the best catalytic activity and showed great potential for practical application.     

超临界流体干燥法制备纳米TiO2-SnO2-SiO2复合光催化剂及其光催化性能研究

半导体多相光催化法作为一种污染治理新技术越来越受到人们的重视,在所使用的半导体光催化剂中,TiO2以无毒,催化活性高,价廉,无污染等特点,成为最具有前途的绿色环保型催化剂之一[1],但其自身具有局限性,如禁带宽度大,需在近紫外光下才能激发产生电子空穴对,对太阳光的利用率仅     

Bi2Ti2O7/TiO2复合纤维：原位水热合成及光催化性能

采用静电纺丝技术制备的TiO2纤维作为模板和反应物,通过原位水热合成了具有异质结构的Bi2Ti2O7/TiO2复合纤维。利用X射线衍射(XRD)、扫描电镜(SEM)、能量散射光谱(EDS)、高分辨透射电镜(HRTEM)和紫外可见吸收光谱(UV-Vis)等分析测试手段对样品的结构和形貌进行表征。以罗丹明B为模拟有机污染物进行光催化降解实验。结果表明:花状Bi2Ti2O7纳米结构均匀地生长在TiO2纤维上,制备了Bi2Ti2O7与TiO2相复合的光催化材料,其光谱响应范围拓宽至可见光区,与纯TiO2纤维相比可见光催化活性显著提高,且易于分离、回收和循环使用。初步探讨了Bi2Ti2O7/TiO2异质结的生长机制和光催化活性提高机理。     

Monolith Manganese-Based Catalyst Supported on ZrO2-TiO2 for NH3-SCR Reaction at Low Temperature

Monolith catalysts were prepared using TiO₂ and ZrO₂-TiO₂ as supports with MnO₂ as active component and Fe₂O₃ as promoter. The catalytic activities at low temperature and stability at high temperature for selective catalytic reduction of NO_x with NH₃ (NH₃-SCR) in the presence of excessive O₂ were studied after the catalysts calcined at different temperatures. The catalysts were characterized by X-ray diffraction (XRD), specific surface area measurements (BET), oxygen storage capacity (OSC), and temperature programmed reduction (H₂-TPR). The results indicated that the catalyst supported on ZrO₂-TiO₂ had excellent stability at high temperature, and possessed high specific surface area and oxygen storage capacity, and had strong redox property. The results of the catalytic activities indicated that the monolith manganese-based catalyst using ZrO₂-TiO₂ as support had evidently improved the activity of NH₃-SCR reduction reaction at low temperature, and it showed great potential for practical application.     

Reactions of C2(a 3πu) with CH4, C2H2, C2H4, C2H6, and O2 using multiphoton UV excimer laser photolysis

C₂(a ³π_u) disappearance rate constants of 1.44, 0.96, 0.0296, 0.0130 and < 10^?6(x10^?10cm³s^?1) are reported for reactions with C₂H₄, C₂H₂, O₂, C₂H₆, and CH₄, respectively at 298 K. C₂(a ³π_u) fragments are generated by multiphoton ArF excimer laser photodissociation at C₂H₂, and monitored by dye laser induced fluorescence. Arguments are presented which favor chemical reactions over the C₂(a ³π_u) → (X ¹σ⁺_g) quenching channel. C₂ + C₂H₂ represents the one possible exception to the reactive channel.     

Electron scattering differential cross sections for C2H2, C2H4, and C2H6 by gas phase electron diffraction - binding effects

Experimental differential cross sections for 40 keV electrons scattered by C₂H₂, C₂H₄ and C₂H₆ molecules were measured using the gas electron diffraction method in the range of the scattering variable s from s = 1 A^?1 to s = 30 A^?1. The differential cross sections for neon were also measured and compared with calculated differential cross sections to calibrate the diffractograph. Experimental differential cross sections show significant deviations with respect to theoretical differential cross sections calculated from the Debye-Ehrenfest model, mainly in the range of small scattering angles. The observed differences are connected to chemical binding effects. From the experimental data, an estimation of the binding energy was carried out. The deduced values: ?0.58 ± 0.20 au for C₂H₂, ?0.94 ± 0.30 au for C₂H₄ and ?1.23 ± 0.40 au for C₂H₆ are in agreement with those obtained by thermochemical methods.     

H2 production with low CO selectivity from photocatalytic reforming of glucose on metal/TiO2 catalysts

H₂ with low CO concentration is produced via photocatalytic reforming of glucose (as a representative of biomass component) on metal/TiO₂ catalyst (metals: Pt, Rh, Ru, Ir, Au, Ni, Cu). It is shown that the loaded metals generally enhance the rate of H₂ production, while they depress the CO selectivity. Both H₂ production and CO selectivity are strongly dependent on the kind of deposited metals on TiO₂. For example, Rh/TiO₂ catalyst is found to be most active for H₂ production while with the most extremely low CO concentration from the photocatalytic reforming of glucose. Supported by the National Natural Science Foundation of China (Grant No. 20403018, 20503034), National Basic Research Program of China (Grant No. 2003CB214504), and Knowledge Innovation Program of the Chinese Academy of Sciences (DICP K2006E2)