首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
The objective of this study was to synthesize micropore-mesopore composite materials by two-step crystallization. The colloidal MFI was first synthesized using a structure-directing agent tetrapropylammonium hydroxide as a template in the first step. This colloid was then self-assembled to form mesoporous structure by using cetyltrimethylammonium bromide as a surfactant. These materials were characterized by powder X-ray diffraction, nitrogen sorption, SEM and TEM. Due to the thick walls produced, it cannot sustain the local strain caused by the crystallization: the mesostructure is collapsed upon heating. The mixed phases of MFI and MCM-41 were obtained by optimizing the synthesis times and reaction temperatures.  相似文献   

2.
含锡介孔分子筛MCM-48的合成、表征及催化性能   总被引:1,自引:0,他引:1  
自M41S问世以来[1],其在吸附、催化及催化剂载体等领域的应用成为人们研究的热点。但纯硅M41S本身不具有催化活性中心,不能直接应用于催化反应中,将具有催化活性的金属掺杂在分子筛骨架中是赋予M41S系列介孔分子筛催化性能的重要手段。文献[2,3]已报道了一些金属掺杂在MCM-41中  相似文献   

3.
张雯  郑瑛  沈小女  张华集 《合成化学》2005,13(6):607-609
以十六烷基三甲基溴化铵为模板剂,偏硅酸钠为硅源,硝酸钇为钇源,用水热法合成了YOx-MCM-41介孔分子筛,经X射线粉末衍射法,FT-IR,热重分析,紫外漫反射法及N2吸附-脱附法表征。结果表明,该分子筛具有热稳定性好、比表面积大、孔道均一等典型的MCM-41介孔分子筛的特征。  相似文献   

4.
合成出了担载稀土有机配合物的无机 -有机杂化中孔发光材料 ( phen) 2 Eu/MCM-4 1 ,用 X射线衍射、红外光谱、荧光光谱和紫外 -可见漫反射光谱对所得样品进行了表征 ,并与相应的纯稀土配合物进行了比较 .结果表明 ,所得杂化材料具有典型的中孔材料 MCM-4 1的结构 ,且经组装后孔结构保持不变 ,在紫外光照射下 ,发出稀土离子的特征谱线 ,但与纯稀土配合物相比 ,其激发光谱发生蓝移 ,稀土 Eu3 所处的格位对称性降低 ,荧光寿命延长 .另外 ,对光谱性质进行了讨论 .  相似文献   

5.
钇、钕和钐负载的MCM-41介孔材料的合成和表征   总被引:2,自引:0,他引:2  
以十六烷基三甲基溴化铵(CTMAB)为模板剂,以正硅酸乙酯(TEOS)为硅源,采用水热晶化法成功合成了Y,Nd,Sm骨架负载的MCM-41介孔材料,通过XRD,N2吸附脱附、SEM,IR,TG-DTA等测试手段对其孔结构、微形貌和Y,Nd,Sm的存在状态进行了表征。XRD结果表明,合成样品具有典型的六方有序排列的MCM-41结构,Y,Nd,Sm离子可以进入介孔材料骨架。N2吸附脱附等温线表明样品具有明显的介孔特征。SEM图片表明各负载样品呈较规则的球形颗粒分布,直径约在0.10~0.15μm。样品的IR图谱在960~985cm-1区间分别出现了Si-O-Ln(Ln=Y,Sm,Nd)的特征吸收峰,证明Y,Nd,Sm存在于介孔材料的骨架中。TG-DTA结果表明,YMCM-41,NdMCM-41和SmMCM-41介孔材料中存在着两种不同的模板剂键合位,进一步证明了Y,Nd,Sm进入了介孔材料骨架。  相似文献   

6.
A series of vanadoaluminosilicate MCM-41 mesoporous molecular sieves with various compositions have been hydrothermally synthesized. Hexadecyltrimethylammonium bromide was used as a surfactant in the synthesis. The samples were characterized with nitrogen sorption, X-ray diffraction, differential thermal analysis, thermogravimetric analysis, Fourier transform-Infrared spectroscopy, UV-visible spectroscopy, scanning electron microscopy, transmission electron microscopy, and solid state NMR. The solid products had the MCM-41 structure and contained only atomically dispersed vanadium and aluminum consistent with framework vanadium and aluminum. The samples were hydrophobic and contained large amount of surfactant in the as-synthesized samples. The surfactant could be removed upon calcination at 450°C. N2 sorption measurements and TEM demonstrate the high mesoporosity of [V, Al]-MCM-41. The incorporation of vanadium and aluminum into MCM-41 decreased the surface area to some extent. The morphologies of all the samples were the agglomerate of plates. 29Si MAS NMR shows that the pore wall is amorphous. 27Al MAS NMR shows that all of aluminum species were tetrahedrally coordinated even after calcination at 550°C.  相似文献   

7.
以羧甲基纤维素和十六烷基三甲基溴化铵为双模板,制备出了具有更高稳定性并且具有高度有序二维六方结构的MCM-41介孔分子筛.透射电镜和X射线衍射结果表明,以双模板制备的MCM-41介孔分子筛具有高度有序的二维六方(p6mm)孔道结构.此外,以双模板制备的MCM-41介孔分子筛焙烧前后的X射线衍射结果表明,在焙烧过程中其晶胞收缩比例为3.1%.与以纯表面活性剂为模版制备的MCM-41介孔分子筛(晶胞收缩比例为9.7%)相比,双模板制备的MCM-41介孔分子筛具有更高的稳定性能. MCM-41介孔分子筛稳定性能的提高可能是由于在硅物种、表面活性剂以及羧甲基纤维素在自组装过程中,羧甲基纤维素表面丰富的羟基与硅物种Si-(OH)x的相互作用促进了Si-(OH)x的缩聚.  相似文献   

8.
 利用直接合成法和后接枝法将含有磺酸基团的硅烷偶联剂引入MCM-41介孔分子筛中, 合成了酸性介孔有机-无机杂化材料. 利用XRD和TEM等方法对其结构进行了表征. 结果表明,利用直接合成法和后接枝法合成的杂化材料仍保持规整的介孔孔道,该材料作为酸催化剂在苯甲醛与乙二醇的缩醛反应中显示了较好的催化活性.  相似文献   

9.
Characterization of V-MCM-41 Mesoporous Materials   总被引:1,自引:0,他引:1  
A series of vanadosilicate V-MCM-41 mesoporous materials with various compositions have been synthesized using vanadium sulfate as the source of vanadium. Hexadecyltrimethylammonium bromide was used as a surfactant in the synthesis. The samples were characterized with nitrogen sorption, X-ray diffraction, framework FTIR, diffuse reflectance UV-visible spectroscopy, differential thermal analysis, thermogravimetric analysis, scanning electron microscopy and transmission electron microscopy. The results show that the solid products had the MCM-41 structure and contained only atomically dispersed vanadium consistent with framework vanadium in V-MCM-41. N2 sorption measurements and TEM demonstrated the high mesoporosity of V-MCM-41. The incorporation of vanadium into MCM-41 decreased the surface area to some extent. The morphology of V-MCM-41 was plate with stepped and smooth surfaces. TEM reveals a regular hexagonal array of uniform channels with curved and rectilinear morphologies. The hexagonal array structure of uniform pore size was observed by TEM. It is proved that the pores were highly aligned.  相似文献   

10.
以双介孔分布MCM-41分子筛为载体,采用等体积浸渍、氨水气相诱导水解和过量浸渍法制备了费-托合成钴摹催化剂,并考察了它们的孔结构、活性物种分布及费-托合成催化性能.结粜表明,采用等体积浸渍法和氨水气相诱导水解法制备的催化剂都保持了较好的双介孔特性,Co颗粒人部分位于分子筛的孔道内部.过量浸渍法和等体积浸渍法制备的催化...  相似文献   

11.
以拟薄水铝石为铝源、水玻璃为硅源、十六烷基三甲基溴化铵为模板剂,在110℃时水热晶化合成了含Al的MCM-41介孔分子筛.采用X射线衍射(XRD)、N2吸附-脱附、固体29Si、27Al魔角旋转核磁共振技术(MASNMR)、扫描电镜(SEM)及吡啶吸附傅里叶变换红外(FTIR)光谱技术对AlMCM-41分子筛进行了表征.结果表明:AlMCM-41分子筛具有六方排列的孔道结构,同时具有很高的相对结晶度、比表面积和孔容,且孔分布单一;AlMCM-41分子筛中Si原子在骨架内键合的程度更高,使AlMCM-41分子筛具有更好的骨架晶化程度;同时具有四配位骨架铝,使AlMCM-41介孔分子筛具有适当的酸性.  相似文献   

12.
A new crystalline phase (via amorphous intermediate), NCUZ-1, was obtained when MCM-41 (Si/Al=9) was under prolonged heating in the mother liquid (which contains NaAlO2, [N(CH3)4]2SiO3, SiO2, and surfactant C16H33N(CH3)3OH(aq) at 105°C for more than two weeks. The largest d spacing of NCUZ-1 calculated from X-ray diffraction data is approx. 6 Å, indicating that the long-range order of the mesopores in MCM-41 was not present in NCUZ-1. Nitrogen absorption studies showed that NCUZ-1 contains both mesopores and micropores. The volume ratio of the mesopore to micropore is approx. 10 to 1 and the BET surface area is 400 m2/g. The TEM micrograph of NCUZ-1 revealed a homogenous phase with distorted mesopores. The 13C NMR spectrum of NCUZ-1 before calcination is similar to that of uncalcined MCM-41, indicating that the organic templates in both phases have a similar structure. In the phase transformation process, the counteranion (OH) of the surfactant template played an important role. It increased the solubility of the aluminosilicate wall; the breaking and reforming the Si–O and Al–O bonds make the phase transformation possible, although the process is very slow. When C16H33N(CH3)3Cl, instead of C16H33N(CH3)3OH, was used as a template, no NCUZ-1 phase was obtained under the same reaction conditions. TEM micrograph, nitrogen absorption isothermal, and 13C NMR spectra of NCUZ-1 suggested that the mesopores were present in the NCUZ-1 phase, although there is no long-range order of these mesopores.  相似文献   

13.
非水介质中合成介孔分子筛MCM-41   总被引:1,自引:0,他引:1  
首次采用十六烷基三甲基溴化铵为模板剂、正硅酸乙酯为硅源, 分别使用无机和有机弱碱, 溶剂热晶化法在非水甘油介质中合成了介孔分子筛MCM-41, 通过XRD, N2吸附-脱附, TG-DTG, IR, SEM等测试手段对样品进行了表征分析, 结果表明在甘油体系中得到的样品具有优良的孔结构性质. 相比于氢氧化钠, 以有机弱碱(无水乙二胺、三乙胺)作为碱源, 可以得到有序性更好、结晶度高的样品, 样品具有较窄的孔径分布.  相似文献   

14.
介孔分子筛V-MCM-41的水热法制备与合成机理   总被引:4,自引:0,他引:4  
 以十六烷基三甲基溴化铵为模板剂,廉价的工业级高模数比(3.3)的硅酸钠为硅源,通过水热法合成了V-MCM-41介孔分子筛. 考察了合成条件对产物织构的影响,并采用低温氮吸附法分析探讨了介孔分子筛V-MCM-41的合成机理. 结果表明,模板剂用量、 pH值、加料方式、晶化温度、晶化时间、陈化时间和焙烧气氛等合成条件对介孔分子筛的制备均有影响,其中晶化温度、 pH值和模板剂用量的影响最为明显. X射线衍射谱表明合成的介孔分子筛具有六方晶体结构. 红外光谱和紫外可见光谱表明V进入了介孔分子筛的骨架结构.  相似文献   

15.
γ-(β-氰乙硫基)丙基三乙氧基硅烷依次用纳米介孔分子筛(MCM-41)固载、与氯化钯反应, 合成了MCM-41负载硫醚钯配合物. 该新型负载钯配合物是芳基卤化物的羰基化反应的有效催化剂, 为各种取代的N-苯基苯甲酰胺、苯甲酸丁酯的合成提供了方便实用的新途径.  相似文献   

16.
高强  王滨  季东  丁勇  索继栓 《分子催化》2006,20(1):7-10
在强酸性条件下以十六烷基三甲基溴化铵为模板剂,TEOS为硅源,沿S X-I 途径合成了Zr含量为0.85~2.42%的介孔分子筛Zr-SBA-1.采用XRD、SEM、BET、DR UV-V is等技术对所合成的Zr-SBA-1的表征结果表明,所合成的Zr-SBA-1分子筛具有典型的立方相介孔结构SBA-1分子筛的特征,锆物种被成功引入分子筛骨架中.  相似文献   

17.
苯官能化MCM-41的合成、表征、磺酰化及与二胺的反应   总被引:3,自引:0,他引:3  
以三乙氧基硅基苯((C2H5O)3Si-Ph,((triethoxysilyl)benzene,TESB)以及正硅酸乙酯(TEOS)的混合液为硅源,以溴代十六烷基吡啶(CPBr)为模板剂,在HCl介质中合成了苯官能化的有机-无机杂化介孔分子筛MCM-41。对合成的分子筛用FT-IR、PXRD、TEM、N2吸附-脱附等手段进行了表征。结果表明,合成的苯官能化的有机-无机杂化介孔分子筛具有良好的介孔孔道结构。用三甲基氯硅烷对分子筛表面的Si-OH进行了封端处理,用氯磺酸对合成的苯官能化的有机-无机杂化介孔分子筛进行了磺酰化,并与各种二胺进行了反应。  相似文献   

18.
以Na2SiO3为硅源, 非离子型表面活性剂脂肪醇聚氧乙烯醚A(EO)9为模板剂合成了介孔Cr-MSU-1, 并通过XRD、HRTEM、N2吸附-脱附、FT-IR和DR UV-Vis等手段对其进行了表征. 结果表明, Cr进入了介孔MSU-1骨架中, 并大部分以四配位的Cr(VI)形式存在. 将Cr-MSU-1作为催化剂用于CO2氧化乙烷脱氢反应, 表现出了良好的催化活性, 650 ℃下乙烷的转化率和乙烯的选择性分别为31.7%和96.1%.  相似文献   

19.
负载TS-1导向剂的介孔材料的合成、表征及催化性能研究   总被引:1,自引:0,他引:1  
利用浸渍法将TS-1导向剂高度分散在介孔材料MCM-41和SBA-15的表面,制备出一系列在氧化反应中具有高活性的催化材料.对样品的表征显示催化剂保持了介孔的结构,同时具有四配位的钛物种均匀地分散于介孔催化剂的表面.催化结果显示,与钛硅分子筛(TS-1)相比,所制备的催化剂在小分子的氧化反应中表现出相似的活性,在大分子的氧化反应中展示了很高的活性,体现了介孔材料的优越性.  相似文献   

20.
利用介孔碳作硬模板合成出具有MFI骨架结构的介孔钛硅材料. 该样品复制了类似SBA-15的介孔结构, 同时骨架含有MFI微孔结构. 透射电镜表征结果表明, 样品表面还有部分大孔结构. 催化结果证明了该样品既具有介孔材料较大孔道结构, 又保持了微孔钛硅材料的高活性.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号