H2在非晶态合金Ni40Fe40P20表面的吸附行为

With the level of B3LYP/Lanl2dz of density functional theory and advisable adsorption models designed, the adsorption properties of the most stable cluster of Ni₂Fe₂P were calculated, and four stable configurations with the adsorption of hydrogen were gained. The geometries and HOMO contributions of 3d orbital of metal atoms and energy level properties of adsorption configurations were concerned and their Infrared Spectrum were simulated and predicted. The bond lengths and bond orders and vibration frequencies concerned synthetically, the adsorption mechanisms of hydrogen molecular on amorphous alloys Ni₄₀Fe₄₀P₂₀ surfaces were discussed in the microcosmic aspect. The hydrogen molecules adsorbing on the clusters were dissociated. In the clusters′ Infrared Spectrums of hydrogen adsorption, there were the vibration peaks with the frequency less than 500 cm^-1 caused by metal atoms and other vibration peaks with the frequency more than 500 cm^-1 caused by hydrogen atoms. Compared with the energy level DOS of the clusters before and after adsorption, it was found, that the new adsorption activity sites generated after the adsorption of hydrogen, as well as easy way for metal atoms providing electrons and participating subsequence reactions were gained.     

Crystal growth, characterization and physical properties of PrNiSb3, NdNiSb3 and SmNiSb3

The crystal structures of three new intermetallic ternary compounds in the LnNiSb₃ (Ln=Pr, Nd and Sm) family have been characterized by single crystal X-ray diffraction. PrNiSb₃, NdNiSb₃ and SmNiSb₃ all crystallize in an orthorhombic space group, Pbcm (No. 57), Z=12, with , , , and ; , , , and ; and , , , and , for Ln=Pr, Nd and Sm, respectively. These compounds consist of rare-earth atoms located above and below layers of nearly square, buckled Sb nets, along with layers of highly distorted edge- and face-sharing NiSb₆ octahedra. Resistivity data indicate metallic behavior for all three compounds. Magnetization measurements show antiferromagnetic behavior with (PrNiSb₃), 4.6 K (NdNiSb₃), and 2.9 K (SmNiSb₃). Effective moments of 3.62 μ_B, 3.90 μ_B and 0.80 μ_B are found for PrNiSb₃, NdNiSb₃ and SmNiSb₃, respectively, and are consistent with Pr³⁺ (f ²), Nd³⁺ (f ³), and Sm³⁺ (f ⁴).     

Na5P3O10-Ca(OH)2-CO2-H2O体系纳米CaCO3的成核与生长

通过化学分析、SEM显微分析技术,结合Rosin-Ramiler概率统计理论,从介观层次研究Na5P3O10-Ca(OH)2-CO2-H2O体系纳米CaCO3的合成反应及其成核和生长过程。结果表明,Na5P3O10对Ca(OH)2的碳化反应具有抑制作用。随着[Na5P3O10]的增加,体系中CaCO3的成核速率B^0逐渐增大。在[Na5P3O10]＝0ppm时,CaCO3结晶的生长由长程扩散和凝聚生长控制;[Na5P3O10]=380.4,760.9ppm时,前期受短程扩散和界面反应控制、后期受长程扩散控制。Na5P3O10的存在,抑制了纳米CaCO3的晶体生长。     

Preparation and Crystal Structure of Re3O10

Trirheniumdecaoxide, Re₃O₁₀, was obtained by the reaction of ReO₂ and ReO₃ in an arc-melting furnace. X-ray powder diffraction revealed a tetragonal structure with space group I m2 and lattice constants a=5.171(1) and c=13.371(6) Å. The crystal structure is built up by layers of corner-sharing [ReO₅] square pyramids perpendicular to [001] with the apical oxygen pointing up and down alternatingly. These layers are interconnected by disordered [ReO₆] octahedra. Early reports on Re₂O₅ are reviewed in the light of our results.     

Evolution of structural distortions in solid solutions between BiMnO3 and BiScO3

Crystal structures of solid solutions of BiMn_1−xSc_xO₃ with x=0.05, 0.1, 0.2, 0.3, 0.4, 0.5, and 0.7 were studied with synchrotron X-ray powder diffraction. The strong Jahn-Teller distortion, observed in BiMnO₃ at 300 K and associated with orbital order, disappeared already in BiMn_0.95Sc_0.05O₃. The orbital-ordered phase did not appear in BiMn_0.95Sc_0.05O₃ down to 90 K. Almost the same octahedral distortions were observed in BiMn_1−xSc_xO₃ with 0.05?x?0.7 at room temperature and in BiMnO₃ at 550 K above the orbital ordering temperature T_OO=473 K. These results allowed us to conclude that the remaining octahedral distortions observed in BiMnO₃ above T_OO are the structural feature originated from the highly distorted monoclinic structure.     

Structure, and magnetic and transport behavior of twinned Ce2Rh3(Pb,Bi)5

Single crystals of a new compound, Ce₂Rh₃(Pb,Bi)₅, have been grown via a flux-growth technique using molten Pb as a solvent. The compound has been characterized by single crystal X-ray diffraction and found to be of the orthorhombic Y₂Rh₃Sn₅ structure type [Cmc2₁ (No. 36), Z=4] with lattice parameters a=4.5980(2), b=27.1000(17) and c=7.4310(4) Å, with V=925.95(9) Å³. Ce₂Rh₃(Pb,Bi)₅ has a complex crystal structure containing Ce atoms encased in Rh-X (X=Pb/Bi) pentagonal and octagonal channels in [100], with polyanions similar to those found in Ce₂Au₃In₅ and Yb₂Pt₃Sn₅. Magnetization measurements find that Ce₂Rh₃(Pb,Bi)₅ is a quasi-two-dimensional system, where the Ce moments are spatially well-localized. Heat capacity measurements show a transition at the Néel temperature of 1.5 K. Evidence for Fermi surface nesting is found in electrical resistivity measurements, and we argue that Ce₂Rh₃(Pb,Bi)₅ is very near a metal-insulator transition in zero field.     

A facile high-yield solvothermal route to tin phosphide Sn4P3

An effective method of synthesis of tin phosphide Sn₄P₃ starting from metallic tin and amorphous red phosphorus by a low-temperature (200 °C) solvothermal reaction in ethylenediamine is offered. The key parameters of this process - duration, temperature, and the ratio of initial components (Sn/P) are studied. The structure, phase composition, and morphology of the products are investigated using powder X-ray diffraction and scanning electron microscopy. Different synthetic ways for tin phosphide are discussed and compared with the proposed one. The mechanism of solvothermal preparation of tin phosphide in ethylenediamine is discussed. It is shown that the proposed solvothermal method opens up the possibility of preparing other metal-rich phosphides.     

Crystal growth, transport, and magnetic properties of Ln3Co4Sn13 (Ln=La, Ce) with a perovskite-like structure

Ln₃Co₄Sn₁₃ (Ln=La, Ce) have been synthesized by flux growth and characterized by single crystal X-ray diffraction. These compounds adopt the Yb₃Rh₄Sn₁₃-type structure and crystallize in the cubic space group (No. 223) with Z=2. Lattice parameters at 298 K are , , and , for the La and Ce analogues, respectively. The crystal structure consists of an Sn-centered icosahedron at the origin of the unit cell, which shares faces with eight Co trigonal prisms and 12 Ln-centered cuboctahedra. Magnetization data at 0.1 T show paramagnetic behavior down to 1.8 K for Ce₃Co₄Sn₁₃, with per Ce³⁺, while conventional type II superconductivity appears below 2.85 K in the La compound. Electrical resistivity and specific heat data for the La compound show a corresponding sharp superconducting transition at T_c∼2.85 K. The entropy and resistivity data for Ce₃Co₄Sn₁₃ show the existence of the Kondo effect with a complicated semiconducting-like behavior in the resistivity data. In addition, a large enhanced specific heat coefficient at low T with a low magnetic transition temperature suggests a heavy-fermionic character for the Ce compound. Herein, the structure and physical properties of Ln₃Co₄Sn₁₃ (Ln=La, Ce) are discussed.     

The disordered cubic structure of Ca7Co3Ga5O18

The new mixed oxide having composition close to Ca₇Co₃Ga₅O₁₈ was synthesized from CaCO₃, Co₃O₄ and Ga₂O₃ at 1150 °C in air and studied by neutron and synchrotron X-ray powder diffraction, selected-area electron diffraction and high-resolution electron microscopy. The structure was refined, using time-of-flight (TOF) neutron powder diffraction data, in space group F432, with and Z=8, to R_F=0.7%. It is considerably disordered, with four different tetrahedral sites randomly occupied by Co and Ga atoms at a ratio of 1:2. The tetrahedra form a disordered (Co_1/3Ga_2/3)O₂ 3D-framework inside which isolated CoO₆ octahedra, surrounded by 8 Ca atoms, are located. The structure is related to the ordered structure of Ca₁₄Al₁₀Zn₆O₃₅. Electron diffraction patterns confirmed the symmetry and unit cell and revealed no diffuse scattering. High-resolution electron microscopy images showed the absence of extended structural defects.     

Structure and Properties of Yb3Ge5

Single crystals of Yb₃Ge₅, grown from pure gallium or indium metal flux and investigated by means of CCD four-circle diffractometry, were consistent with the Th₃Pd₅-type of structure, displaying full order of vacancies and germanium atoms. From magnetic susceptibility and electrical resistivity measurements, performed on single-crystalline specimens, Yb₃Ge₅ was found to be an intermediate valent systems.     

A new structure type of phosphate: Crystal structure of Na2Zn5(PO4)4

A new compound, Na₂Zn₅(PO₄)₄, was identified in the system ZnONa₂OP₂O₅ and high-quality crystal was obtained by the melt method. The crystal structure of this compound was solved by direct method from single crystal X-ray diffraction data. The structure was then refined anisotropically using a full-matrix least square refinement on F² and the refinement converged to R₁=0.0233 and wR₂=0.0544. This compound crystallizes in the orthorhombic system with space group Pbcn, lattice parameters a=10.381(2) Å, b=8.507(1) Å, c=16.568(3) Å and Z=4. The structure is made up of 3D [Zn₅P₄O₁₆]_n²ⁿ⁻ covalent framework consisting of [Zn₄P₄O₁₆]_n⁴ⁿ⁻ layers. The powder diffraction pattern of Na₉Zn₂₁(PO₄)₁₇ is explained by simulating a theoretical pattern with NaZnPO₄ and Na₂Zn₅(PO₄)₄ in the molar ratio of 1:4 and then by Rietveld refinement of experimental pattern. Na₂Zn₅(PO₄)₄ melts congruently at 855 °C and its conductivity is 5.63×10⁻⁹ S/cm.     

Structural order and disorder in Co-based layered cuprates CoSr2(Y,Ce)sCu2O5+2s (s=1-3)

Crystal structures of a homologous series of Co-based layered cuprates, CoSr₂(Y,Ce)_sCu₂O_5+2s (s=1-3), have been investigated by high-resolution electron microscopy (HREM) and electron diffraction (ED) techniques. For all the three phases ED patterns showed double periodicity along a direction parallel to the CoO layers, indicating a regular alternation of two types of CoO₄-tetrahedra chains within the layers. Also seen was ordering of the chains along the layer-stacking direction for the s=1 phase (Co-1212); ED patterns simulated based on the proposed superstructure model well reproduced the observed patterns. For the s=2 (Co-1222) and s=3 (Co-1232) phases in which an additional fluorite-type layer-block is inserted between two CuO₂ planes, HREM and ED analysis revealed complete disorder of the CoO₄ chains along the layer-stacking direction. This implies that the interlayer ordering is mainly controlled by the distance between the neighboring CoO layers.     

The Crystal Structures, Microstructure and Ionic Conductivity of Ba2In2O5 and Ba(InxZr1−x)O3−x/2

This paper describes the results of electron microscopy, high-temperature powder neutron diffraction, and impedance spectroscopy studies of brownmillerite-structured Ba₂In₂O₅ and perovskite structured Ba(In_xZr_1−x)O_3−x/2. The ambient temperature structure of Ba₂In₂O₅ is found to adopt Icmm symmetry, with disorder of the tetrahedrally coordinated (In³⁺) ions of the type observed previously in Sr₂Fe₂O₅. Ba₂In₂O₅ undergoes a ∼6-fold increase in its ionic conductivity over the narrow temperature range from ∼1140 K to ∼1230 K, in broad agreement with previous studies. This transition corresponds to a change from the brownmillerite structure to a cubic perovskite arrangement with disordered anions. Electron microscopy investigations showed the presence of extended defects in all the crystals analyzed. Ba(In_xZr_1−x)O_3−x/2 samples with x=0.1 to 0.9 adopt the cubic perovskite structure, with the lattice parameter increasing with x.     

Crystal structures and magnetic properties of CeAu4Si2 and CeAu2Si2

Single crystals of CeAu₄Si₂ and CeAu₂Si₂ have been grown out of ternary fluxes rich in Au, and the former, also by sintering the stoichiometric composition at 750 °C. The single-crystal X-ray refinement result for CeAu₄Si₂ is orthorhombic, Cmmm (No. 65, Z=2), different from a tetragonal result found from an X-ray powder diffraction refinement [H. Nakashima, et al., J. Alloys Compds. 424 (2006) 7]. For CeAu₂Si₂, this is the first report of the stoichiometric crystalline phase, in the known tetragonal I4/mmm structure. The anisotropic field- and temperature-dependent magnetizations, as well as specific heat and resistivity data are compared. Although both compounds have related structural packing, they present unique magnetic features. CeAu₂Si₂ is a typical antiferromagnet with T_N=8.8(1) K and CeAu₄Si₂ features a ferromagnetic component below T_c=3.3(1) K. Both phases have effective moments close in value to that of free Ce³⁺.     

A simple method of fabricating large-area α-MnO2 nanowires and nanorods

α-MnO₂ nanowires or nanorods have been selectively synthesized via the hydrothermal method in nitric acid condition. The α-MnO₂ nanowires hold with average diameter of 50 nm and lengths ranging between 10 and 40 μm, using MnSO₄·H₂O as manganese source; meanwhile, α-MnO₂ bifurcate nanorods with average diameter of 100 nm were obtained by adopting MnCO₃ as starting material. The morphology of α-MnO₂ bifurcate nanorods is the first one to be reported in this paper. X-ray powder diffraction (XRD), field scanning electron microscopy (FESEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED) and high-resolution transmission electron microscopy (HRTEM) were used to characterize the products. Experimental results indicate that the concentrated nitric acid plays a crucial role in the phase purity and morphologies of the products. The possible formation mechanism of α-MnO₂ nanowires and nanorods has been discussed.     

Synthesis, structure characterization and optical properties of a new tripotassium cadmium pentaborate, K3CdB5O10

A new ternary borate oxide, K₃CdB₅O₁₀, has been synthesized by solid-state reaction at 580 °C. The compound crystallizes in the monoclinic space group P2₁/n with a=7.6707 (7) Å, b=19.1765 (17) Å, c=7.8784 (6) Å, β=115.6083 (49)°, and Z=4. The crystal structure consists of a two-dimensional infinite [CdB₅O₁₀] layer, which forms by connecting isolated double ring [B₅O₁₀] groups and CdO₄ tetrahedra. K atoms filling in the interlayer and intralayer link the layers together and balance charge. The IR spectrum has been studied and confirmed the presence of both BO₃ and BO₄ groups, and the UV-vis-IR diffuse reflectance spectrum exhibits a band gap of about 3.4 eV. The DSC analysis proves that K₃CdB₅O₁₀ is a congruent melting compound.     

Crystal and magnetic structures of the brownmillerite compound Ca2Fe1.039(8)Mn0.962(8)O5

The crystal and magnetic structures of the brownmillerite material, Ca₂Fe_1.039(8)Mn_0.962(8)O₅ were investigated using powder X-ray and neutron diffraction methods, the latter from 3.8 to 700 K. The compound crystallizes in Pnma space group with unit cell parameters of a=5.3055(5) Å, b=15.322(2) Å, c=5.4587(6) Å at 300 K. The neutron diffraction study revealed the occupancies of Fe³⁺ and Mn³⁺ ions in both octahedral and tetrahedral sites and showed some intersite mixing and a small, ∼4%, Fe excess. While bulk magnetization data were inconclusive, variable temperature neutron diffraction measurements showed the magnetic transition temperature to be 407(2) K below which a long range antiferromagnetic ordering of spins occurs with ordering wave vector k=(000). The spins of each ion are coupled antiferromagnetically with the nearest neighbors within the same layer and coupled antiparallel to the closest ions from the neighboring layer. This combination of intra- and inter-layer antiparallel arrangement of spins forms a G-type magnetic structure. The ordered moments on the octahedral and tetrahedral sites at 3.8 K are 3.64(16) and 4.23(16) μ_B, respectively.     

一个新的双核锌配合物Zn2(dhaash)2(py)4的合成及晶体结构

The crystal of binuclear zinc complex Zn₂(dhaash)₂(py)₄ was obtained in DMF and pyridine, where H₂dhaash is 2,4-dihydroxy-5-acetylacetophenone-N-salicylhydrazone. It has been characterized by IR, UV, element analysis and X-ray single crystal diffraction. The crystallographic data were as follows: monoclinic system, space group P2₁/c, a=1.108 98(11) nm, b=1.640 84(16) nm, c=1.445 14(14) nm, β=108.617(2)°, Z=2, V=2.492 1(4) nm³, D_c=1.466 g·cm^-3, M_r=1 099.74, μ=1.031 mm^-1, F(000)=1 136 and the final R=0.044 8 and wR=0.105 8 for 4 143 observed reflections with I≥2σ(I), respectively. The X-ray crystal structure analysis revealed that, in the centrosymmetric binuclear complex molecule, two zinc(Ⅱ) centers are linked by two oxygen atoms (O(3) and O(3A)), respectively. Zn(1)…Zn(1A) distance is 0.314 81(6) nm, O(3)…O(3A) distance is 0.270 4(2) nm. Every zinc(Ⅱ) ion has an elongated octahedral coordination. For example, the two pyridine nitrogen atoms, one oxygen atom and one nitrogen atom from salicylhydrazone, one oxygen atom from 2,4-dihydroxy-5-acetylacetophenone in one dhaash^2- ligand and one oxygen atom from 2,4-dihydroxy-5-acetylacetophenone in another dhaash^2- ligand coordinated to zinc(Ⅱ) ion, respectively. Two zinc(Ⅱ) ions and all the 72 non-hydrogen atoms in the two dhaash^2- ligands are in the same plane. CCDC: 261929.     

Pressure-induced structural transformations in lanthanide titanates: La2TiO5 and Nd2TiO5

The structure of orthorhombic rare earth titanates of La₂TiO₅ and Nd₂TiO₅, where Ti cations are in five-fold coordination with oxygen, has been studied at high pressures by X-ray diffraction (XRD), Raman scattering measurements, and quantum mechanical calculations. Both XRD and Raman results indicated two pressure-induced phase transitions during the process. An orthorhombic super cell (a×b×2c) formed at a pressure between 6 and 10 GPa, and then transformed to a hexagonal high-pressure phase accompanied by partial decomposition. The hexagonal high-pressure phase is quenchable. Detailed structural analysis indicated that the five-coordinated TiO₅ polyhedra remain during the formation of super cell, but the orthorhombic-to-hexagonal phase transition at high pressures is a reconstructive process, and the five-fold Ti-O coordination increased to more than 6. This phase transition sequence was verified by quantum mechanical calculations.     

A new triclinic modification of the pyrochlore-type KOs2O6 superconductor

A new modification of KOs₂O₆, the representative of a new structural type (Pearson symbol aP18, a=5.5668(1) Å, b=6.4519(2) Å, c=7.2356(2) Å, α=65.377(3)°, β=70.572(3)°, γ=75.613(2)° space group P−1, no. 2 was synthesized employing high pressure technique. Its structure was determined by single-crystal X-ray diffraction. The structure can be described as two OsO₆ octahedral chains relating to each other through inversion and forming big voids with K atoms inside. Quantum chemical calculations were performed on the novel compound and structurally related cubic compound. High-pressure X-ray study showed that cubic KOs₂O₆ phase was stable up to 32.5(2) GPa at room temperature.