Absolute calculations of acidity of C-substituted tetrazoles in solution

The CBS-QB3 method was used to calculate the gas-phase free energy difference between nine tetrazole derivatives and their anions, and the DPCM and CPCM continuum solvation methods were applied to calculate the free energy differences of solvation. The calculations were performed on both gas-phase and solvent-phase optimized structures. Absolute pKa calculations using the CPCM method and the gas-phase optimized structures yielded mean unsigned error of 0.4 pKa unit. The calculations were made with the routine settings implemented in Gaussian 98. The study is as accurate as the best reported so far for six carboxylic acids and phenols and, to our knowledge, the best reported for the acidities of heterocyclic compounds in solution.     

Accurate pK(a) calculations for carboxylic acids using complete basis set and Gaussian-n models combined with CPCM continuum solvation methods

Complete Basis Set and Gaussian-n methods were combined with CPCM continuum solvation methods to calculate pK(a) values for six carboxylic acids. An experimental value of -264.61 kcal/mol for the free energy of solvation of H(+), DeltaG(s)(H(+)), was combined with a value for G(gas)(H(+)) of -6.28 kcal/mol to calculate pK(a) values with Cycle 1. The Complete Basis Set gas-phase methods used to calculate gas-phase free energies are very accurate, with mean unsigned errors of 0.3 kcal/mol and standard deviations of 0.4 kcal/mol. The CPCM solvation calculations used to calculate condensed-phase free energies are slightly less accurate than the gas-phase models, and the best method has a mean unsigned error and standard deviation of 0.4 and 0.5 kcal/mol, respectively. The use of Cycle 1 and the Complete Basis Set models combined with the CPCM solvation methods yielded pK(a) values accurate to less than half a pK(a) unit.     

Thermodynamic cycle for the calculation of ab initio pKa values for hydroxamic acids

A thermodynamic cycle to calculate pK_a values (Minus log of acid dissociation constants) of hydroxamic acids is presented. Hydroxamic acids exist mainly as amide isomers in the aqueous medium. The amide form of hydroxamic acids has two deprotonation sites and may yield either an N-ion or an O-ion upon deprotonation. The thermodynamic cycle proposed includes the gas-phase N–H deprotonation of the hydroxamic acid, the solvent phase transformation of the N-ion to the O-ion and the solvation of the hydroxamic acid molecule and the O-ion in water. The CBS-QB3 method was employed to obtain gas-phase free energy differences between 12 hydroxamic acids and their respective anions. The aqueous solvation Gibbs free energy changes were calculated at the HF/6-31G(d)/CPCM and HF/6-31+G(d)/CPCM levels of theory using HF/6-31+G(d)/CPCM geometries. For the proton, literature values of the gas-phase free energy of formation and the solvation free energy change were used. The free energy change for the transformation of the N-ion to O-ion in the aqueous medium was calculated by employing CBS-QB3/CPCM in the aqueous medium. For this, the hydroxamic acids were divided in two classes according to the substituent at the carbonyl carbon. A common transformation free energy difference for aliphatic substituted hydroxamic acids and a separate common transformation free energy difference for aromatic substituted hydroxamic acids were obtained. The pK_a calculation yielded a root mean square error of 0.32 pK_a units.     

pKa of acetate in water: a computational study

Several computational methods including the conductor-like polarizable continuum model, CPCM with both UAKS and UAHF cavities, Cramer and Truhlar's generalized Born solvation model, SM5.4(AM1), SM5.4(PM3), and SM5.43R(mPW1PW91/6-31+G(d)), and mixed QM/MM-Ewald simulations were used to calculate the pK(a) values of acetate and bicarbonate anions in aqueous solution. This work provided a critical and comprehensive assessment of the quality of these theoretical models in the calculation of aqueous solvation free energies for the singly charged acetate and bicarbonate ions, as well as the doubly charged acetate dianion and carbonate dianion. It was shown that QM/MM-Ewald simulations could give an accurate and consistent evaluation of the pK(a) values of acetate and bicarbonate based on both the relative and absolute pK(a) formulas, while other methods could yield satisfactory results only for certain calculations. However, this does not mean that the current QM/MM-Ewald protocol is superior to other methods. The useful information obtained in this investigation is that both the absolute and relative pK(a) formulas should better be tested in accurate calculations of pK(a) values based on any methods.     

Experimentation with different thermodynamic cycles used for pKa calculations on carboxylic acids using complete basis set and Gaussian‐n models combined with CPCM continuum solvation methods

Complete basis set and Gaussian‐n methods were combined with Barone and Cossi's implementation of the polarizable conductor model (CPCM) continuum solvation methods to calculate pK_a values for six carboxylic acids. Four different thermodynamic cycles were considered in this work. An experimental value of ?264.61 kcal/mol for the free energy of solvation of H⁺, ΔG_s(H⁺), was combined with a value for G_gas(H⁺) of ?6.28 kcal/mol, to calculate pK_a values with cycle 1. The complete basis set gas‐phase methods used to calculate gas‐phase free energies are very accurate, with mean unsigned errors of 0.3 kcal/mol and standard deviations of 0.4 kcal/mol. The CPCM solvation calculations used to calculate condensed‐phase free energies are slightly less accurate than the gas‐phase models, and the best method has a mean unsigned error and standard deviation of 0.4 and 0.5 kcal/mol, respectively. Thermodynamic cycles that include an explicit water in the cycle are not accurate when the free energy of solvation of a water molecule is used, but appear to become accurate when the experimental free energy of vaporization of water is used. This apparent improvement is an artifact of the standard state used in the calculation. Geometry relaxation in solution does not improve the results when using these later cycles. The use of cycle 1 and the complete basis set models combined with the CPCM solvation methods yielded pK_a values accurate to less than half a pK_a unit. © 2001 John Wiley & Sons, Inc. Int J Quantum Chem, 2001     

Accurate calculation of absolute one-electron redox potentials of some para-quinone derivatives in acetonitrile

Standard ab initio molecular orbital theory and density functional theory calculations have been used to calculate absolute one-electron reduction potentials of several para-quinones in acetonitrile. The high-level composite method of G3(MP2)-RAD is used for the gas-phase calculations and a continuum model of solvation, CPCM, has been employed to calculate solvation energies. To compare the theoretical reduction potentials with experiment, the reduction potentials relative to a standard calomel electrode (SCE) have also been calculated and compared to experimental values. The average error of the calculated reduction potentials using the proposed method is 0.07 V without any additional approximation. An ONIOM method in which the core is studied at G3(MP2)-RAD and the substituent effect of the rest of the molecule is studied at R(O)MP2/6-311+G(3df,2p) provides an accurate low-cost alternative to G3(MP2)-RAD for larger molecules.     

Free energy decomposition analysis of bonding and nonbonding interactions in solution

A free energy decomposition analysis algorithm for bonding and nonbonding interactions in various solvated environments, named energy decomposition analysis-polarizable continuum model (EDA-PCM), is implemented based on the localized molecular orbital-energy decomposition analysis (LMO-EDA) method, which is recently developed for interaction analysis in gas phase [P. F. Su and H. Li, J. Chem. Phys. 130, 074109 (2009)]. For single determinant wave functions, the EDA-PCM method divides the interaction energy into electrostatic, exchange, repulsion, polarization, desolvation, and dispersion terms. In the EDA-PCM scheme, the homogeneous solvated environment can be treated by the integral equation formulation of PCM (IEFPCM) or conductor-like polarizable continuum model (CPCM) method, while the heterogeneous solvated environment is handled by the Het-CPCM method. The EDA-PCM is able to obtain physically meaningful interaction analysis in different dielectric environments along the whole potential energy surfaces. Test calculations by MP2 and DFT functionals with homogeneous and heterogeneous solvation, involving hydrogen bonding, vdW interaction, metal-ligand binding, cation-π, and ionic interaction, show the robustness and adaptability of the EDA-PCM method. The computational results stress the importance of solvation effects to the intermolecular interactions in solvated environments.     

A new quantum method for electrostatic solvation energy of protein

A new method that incorporates the conductorlike polarizable continuum model (CPCM) with the recently developed molecular fractionation with conjugate caps (MFCC) approach is developed for ab initio calculation of electrostatic solvation energy of protein. The application of the MFCC method makes it practical to apply CPCM to calculate electrostatic solvation energy of protein or other macromolecules in solution. In this MFCC-CPCM method, calculation of protein solvation is divided into calculations of individual solvation energies of fragments (residues) embedded in a common cavity defined with respect to the entire protein. Besides computational efficiency, the current approach also provides additional information about contribution to protein solvation from specific fragments. Numerical studies are carried out to calculate solvation energies for a variety of peptides including alpha helices and beta sheets. Excellent agreement between the MFCC-CPCM result and those from the standard full system CPCM calculation is obtained. Finally, the MFCC-CPCM calculation is applied to several real proteins and the results are compared to classical molecular mechanics Poisson-Boltzmann (MM/PB) and quantum Divid-and-Conque Poisson-Boltzmann (D&C-PB) calculations. Large wave function distortion energy (solute polarization energy) is obtained from the quantum calculation which is missing in the classical calculation. The present study demonstrates that the MFCC-CPCM method is readily applicable to studying solvation of proteins.     

First-principles prediction of the pK(a)s of anti-inflammatory oxicams

The gas- and aqueous-phase acidities of a series of oxicams have been computed by combining M05-2X/6-311+G(3df,2p) gas-phase free energies with solvation free energies from the CPCM-UAKS, COSMO-RS, and SMD solvent models. To facilitate accurate gas-phase calculations, a benchmarking study was further carried out to assess the performance of various density functional theory methods against the high-level composite method G3MP2(+). Oxicams are typically diprotic acids, and several tautomers are possible in each protonation state. The direct thermodynamic cycle and the proton exchange scheme have been employed to compute the microscopic pK(a)s on both solution- and gas-phase equilibrium conformers, and these were combined to yield the macroscopic pK(a) values. Using the direct cycle of pK(a) calculation, the CPCM-UAKS model delivered reasonably accurate results with MAD ~ 1, whereas the SMD and COSMO-RS models' performance was less satisfactory with MAD ~ 3. Comparison with experiment also indicates that direct cycle calculations based on solution conformers generally deliver better accuracy. The proton exchange cycle affords further improvement for all solvent models through systematic error cancellation and therefore provides better reliability for the pK(a) prediction of compounds of these types. The latter approach has been applied to predict the pK(a)s of several recently synthesized oxicam derivatives.     

Theoretical study of the solvation of fluorine and chlorine anions by water

The solvation of fluoride and chloride anions (F(-) and Cl(-), respectively) by water has been studied using effective fragment potentials (EFPs) for the water molecules and ab initio quantum mechanics for the anions. In particular, the number of water molecules required to fully surround each anion has been investigated. Monte Carlo calculations have been used in an attempt to find the solvated system X(-)(H(2)O)(n) (X = F, Cl) with the lowest energy for each value of n. It is predicted that 18 water molecules are required to form a complete solvation shell around a Cl(-) anion, where "complete solvation" is interpreted as an ion that is completely surrounded by solvent molecules. Although fewer water molecules may fully solvate the Cl(-) anion, such structures are higher in energy than partially solvated molecules, up to n > or = 18. Calculations on the F(-) anion suggest that 15 water molecules are required for a complete solvation shell. The EFP predictions are in good agreement with the relative energies predicted by ab initio energy calculations at the EFP geometries.     

Computation of pKa values of substituted aniline radical cations in dimethylsulfoxide solution

A newly developed computation strategy was used to calculate the absolute pKa values of 18 substituted aniline radical cations in dimethylsulfoxide (DMSO) solution with the error origin elucidated and deviation minimized. The B3LYP/6-311++G(2df,2p) method was applied and was found to be capable of reproducing the gas-phase proton-transfer free energies of substituted anilines with a precision of 0.83 kcal/mol. The IEF-PCM solvation model with gas-phase optimized structures was adopted in calculating the pKa values of the substituted neutral anilines in DMSO, regenerating the experimental results within a standard deviation of 0.4 pKa unit. When the IEF-PCM solvation model was applied to calculate the standard redox potentials of anilide anions, it showed that the computed values agreed well with experiment, but the redox potentials of substituted anilines were systematically overestimated by 0.304 eV. The cause of this deviation was found to be related to the inaccuracy of the calculated solvation free energies of aniline radical cations. By adjusting the size of the cavity in the IEF-PCM method, we derived a reliable procedure that can reproduce the experimental pKa values of aniline radical cations within 1.2 pKa units to those from experiment.     

Conduction of Li+ cations in ethylene carbonate (EC) and propylene carbonate (PC): comparative studies using density functional theory

Density functional theory is used to study the interaction of Li⁺ cation with ethylene carbonate (EC) and propylene carbonate (PC) comparatively, which are the most popular solvents used in lithium-ion battery composite. In our theoretical calculations, we use DFT hybrid parameter B3LYP5 with a basis set 6–31G** by means of PCGAMESS/Firefly software package. We analyze the optimized structures of EC, PC, and their clusters including lithium-ion. We then calculate solvation energy, desolvation energy, electron affinity, Gibbs free energy, heats of formation of Li⁺ solvated by EC and PC, and the charge on Li⁺. From the above analysis, we observe EC as a better solvent than PC in applications of lithium-ion batteries.     

Ab initio studies of aspartic acid conformers in gas phase and in solution

Systematic and extensive conformational searches of aspartic acid in gas phase and in solution have been performed. For the gaseous aspartic acid, a total of 1296 trial canonical structures and 216 trial zwitterionic structures were generated by allowing for all combinations of internal single-bond rotamers. All the trial structures were optimized at the B3LYP/6-311G* level and then subjected to further optimization at the B3LYP/6-311++G** level. A total of 139 canonical conformers were found, but no stable zwitterionic structure was found. The rotational constants, dipole moments, zero-point vibrational energies, harmonic frequencies, and vertical ionization energies of the canonical conformers were determined. Single-point energies were also calculated at the MP2/6-311++G** and CCSD/6-311++G** levels. The equilibrium distributions of the gaseous conformers at various temperatures were calculated. The proton affinity and gas phase basicity were calculated and the results are in excellent agreement with the experiments. The conformations in the solution were studied with different solvation models. The 216 trial zwitterionic structures were first optimized at the B3LYP/6-311G* level using the Onsager self-consistent reaction field model (SCRF) and then optimized at the B3LYP/6-311++G** level using the conductorlike polarized continuum model (CPCM) SCRF theory. A total of 22 zwitterions conformers were found. The gaseous canonical conformers were combined with the CPCM model and optimized at the B3LYP/6-311++G** level. The solvated zwitterionic and canonical structures were further examined by the discrete/SCRF model with one and two water molecules. The incremental solvation of the canonical and zwitterionic structures with up to six water molecules in gas phase was systematically examined. The studies show that combining aspartic acid with at least six water molecules in the gas phase or two water molecules and a SCRF solution model is required to provide qualitatively correct results in the solution.     

Accurate pKa determination for a heterogeneous group of organic molecules.

Single-molecule studies that allow to compute pKa values, proton affinities (gas-phase acidity/basicity) and the electrostatic energy of solvation have been performed for a heterogeneous set of 26 organic compounds. Quantum mechanical density functional theory (DFT) using the Becke-half&half and B3LYP functionals on optimized molecular geometries have been carried out to investigate the energetics of gas-phase protonation. The electrostatic contribution to the solvation energies of protonated and deprotonated compounds were calculated by solving the Poisson equation using atomic charges generated by fitting the electrostatic potential derived from the molecular wave functions in vacuum. The combination of gas-phase and electrostatic solvation energies by means of the thermodynamic cycle enabled us to compute pKa values for the 26 compounds, which cover six distinct chemical groups (carboxylic acids, benzoic acids, phenols, imides, pyridines and imidazoles). The computational procedure for determining pKa values is accurate and transferable with a root-mean-square deviation of 0.53 and 0.57 pKa units and a maximum error of 1.0 pKa and 1.3 pKa units for Becke-half&half and B3LYP DFT functionals, respectively.     

Calculation of acidic dissociation constants in water: solvation free energy terms. Their accuracy and impact

Three polarizable continuum models, DPCM, CPCM, and IEFPCM, have been applied to calculate free energy differences for nine neutral compounds and their anions. On the basis of solvation free energies, the pK_a values were obtained for the compounds in question by using three thermodynamic cycles: one, involving the combined experimental and calculated data, as well as two other cycles solely with calculated data. This paper deals with the influence of factors such as the SCRF model applied, choice of a particular thermodynamic cycle, atomic radii used to build a cavity in the solvent (water), optimization of geometry in water, inclusion of electron correlation, and the dimension of the basis set on the solvation free energies and on the calculated pK_a values. Electronic supplementary material The online version of this article (doi: ) contains supplementary material, which is available to authorized users.     

Conformational search for zwitterionic leucine and hydrated conformers of both the canonical and zwitterionic leucine using the DFT-CPCM model

The stable conformations for zwitterionic leucine have been searched for in solution as well as in gas phase. A total of 54 trial structures were generated by considering possible combinations of single bond rotamers. It is observed that zwitterions are not stable in gas phase. In order to investigate the zwitterions of leucine in solution, the calculations for all trial structures of zwitterions were performed initially at the PM3 level and 14 the lowest energy structures were reoptimized at the B3LYP/6-311G(d) level using the CPCM model. Seven of these conformers of zwitterionic leucine were found to be stable in solution. The five most stable conformers were then reoptimized at the B3LYP/6-311++G(d, p) level. The energy ordering of the canonical leucine(neutral) conformers were also considered on the basis of single point energy calculations at the B3LYP/6-311++G(d, p) level using the CPCM model. The chemical hardness, chemical potential, vertical ionization energy and vertical electron affinity were calculated for a few of the most stable canonical leucine and its zwitterions in solution. The effects of explicit addition of water molecules (microsolvation) on the structure and the energy of both canonical and zwitterionic conformers of leucine were investigated. It is noted that in gas phase, the singly and doubly hydrated canonical (neutral) forms are more stable than their zwitterionic counterparts. The solvated zwitterions and canonical structures of leucine were further investigated using the discrete/SCRF model with zero, one and two water molecules. In solution, the continuum solvent model shows that the bare zwitterionic form is more stable than the bare canonical form by 1.6 kcal/mol. This energy separation is increased to 3.8 and 4.8 kcal/mol with inclusion of one and two water molecules, respectively. The optimized structural parameters for the most stable zwitterionic leucine with zero, one and two water molecules in solution were compared with those reported for l-leucine crystal, which shows a close agreement between the optimized geometrical parameters of the zwitterionic leucine with two water molecules in solution with the experimental geometrical parameters for l-leucine crystal. It is also observed that when the structures of zwitterions with one and two explicit water molecules are optimized in solution, the geometrical parameters and their relative energies are found to be appreciably modified. We have also calculated the vibrational spectra of the most stable solvated zwitterionic leucine as well as for the most stable structure of zwitterionic leucine with one and two water molecules in solution.     

The effect of aqueous solvation upon alpha-helix formation for polyalanines

The incremental free energies of aqueous solution for acetyl(ala)NNH2 in its extended unfolded and alpha-helical conformations are compared using the SM5.2 solvation method of Cramer and Truhlar. A combination of density functional theory (DFT) at the B3LYP/D95(d,p) and AM1 has been employed using the ONIOM method. The incremental solvation energies of alpha-helical structures are very similar for both ONIOM and AM1 optimized structures as these structures do not significantly change upon solution. However, the conformations of the unfolded peptides change from extended beta-strand to polyproline II conformations upon aqueous solution. The incremental solvation free energy per residue of the polyproline II structure is about 2 kcal/mol/residue greater than that for the alpha-helix, representing an upper limit for the difference between the solvation energies. However, most of this difference disappears when the energy required to distort the optimized gas-phase extended beta-strand structure to the optimized polyproline II solution structure is included in the analysis, leaving an estimated difference in incremental solvation free energy of 0.3-0.5 kcal/mol favoring the unfolded structure. The solution structure sacrifices the stability derived from the intramolecular C5 H-bonds for more favorable interactions with the aqueous solvent.     

pKa calculations of aliphatic amines, diamines, and aminoamides via density functional theory with a Poisson-Boltzmann continuum solvent model

In order to make reliable predictions of the acid-base properties of macroligands with a large number of ionizable sites such as dendrimers, one needs to develop and validate computational methods that accurately estimate the acidity constants (pKa) of their chemical building blocks. In this article, we couple density functional theory (B3LYP) with a Poisson-Boltzmann continuum solvent model to calculate the aqueous pKa of aliphatic amines, diamines, and aminoamides, which are building blocks for several classes of dendrimers. No empirical correction terms were employed in the calculations except for the free energy of solvation of the proton (H+) adjusted to give the best match with experimental data. The use of solution-phase optimized geometries gives calculated pKa values in excellent agreement with experimental measurements. The mean absolute error is <0.5 pKa unit in all cases. Conversely, calculations for diamines and aminoamides based on gas-phase geometries lead to a mean absolute error >0.5 pKa unit compared to experimental measurements. We find that geometry optimization in solution is essential for making accurate pKa predictions for systems possessing intramolecular hydrogen bonds.     

Solvation free energies of molecules. The most stable anionic tautomers of uracil

Anionic states of nucleic acid bases are suspected to play a role in the radiation damage processes of DNA. Our recent studies suggested that the excess electron attachment to the nucleic acid bases can stabilize some rare tautomers, i.e. imine-enamine tautomers and other tautomers with a proton being transferred from nitrogen sites to carbon sites (with respect to the canonical tautomer). So far, these new anionic tautomers have been characterized by the gas-phase electronic structure calculations and photoelectron spectroscopy experiments. In the current contribution we explore the effect of water solvation on the stability of the new anionic tautomers of uracil. The accurate free energies of solvation are calculated in a two step approach. The major contribution was calculated using the classical free-energy perturbation adiabatic-charging approach, where it is assumed that the solvated molecule has the charge distribution given by the polarizable continuum model. In the second step the free energy of solvation is refined by taking into account the real, average solvent charge distribution. This is done using our accelerated QM/MM simulations, where the QM energy of the solute is calculated in the mean potential averaged over many MD steps. We found that in water solution three of the recently identified anionic tautomers are 6.5-3.6 kcal mol(-1) more stable than the anion of the canonical tautomer.     

Comparison of two simulation methods to compute solvation free energies and partition coefficients

The thermodynamic integration (TI) and expanded ensemble (EE) methods are used here to calculate the hydration free energy in water, the solvation free energy in 1‐octanol, and the octanol‐water partition coefficient for a six compounds of varying functionality using the optimized potentials for liquid simulations (OPLS) all‐atom (AA) force field parameters and atomic charges. Both methods use the molecular dynamics algorithm as a primary component of the simulation protocol, and both have found wide applications in fields such as the calculation of activity coefficients, phase behavior, and partition coefficients. Both methods result in solvation free energies and 1‐octanol/water partition coefficients with average absolute deviations (AAD) from experimental data to within 4 kJ/mol and 0.5 log units, respectively. Here, we find that in simulations the OPLS‐AA force field parameters (with fixed charges) can reproduce solvation free energies of solutes in 1‐octanol with AAD of about half that for the solute hydration free energies using a extended simple point charge (SPC/E) model of water. The computational efficiency of the two simulation methods are compared based on the time (in nanoseconds) required to obtain similar standard deviations in the solvation free energies and 1‐octanol/water partition coefficients. By this analysis, the EE method is found to be a factor of nine more efficient than the TI algorithm. For both methods, solvation free energy calculations in 1‐octanol consume roughly an order of magnitude more CPU hours than the hydration free energy calculations. © 2012 Wiley Periodicals, Inc.