Prospect and Reality of Concentration Gradient Cathode of Lithium-ion Batteries

Li[NixMnyCoz]O2 cathodes are currently the most practicable materials in the timing of developing high-performance rechargeable batteries for next-generation technologies.With the ever-growing demand for energy density,a significant breakthrough has been achieved by the controllable concentration design forming core-shell and concentration gradient structures to push Li[NixCoyMnz]O2 toward higher energy density,longer lifetime and safety.Herein,we review the recent progress on advanced concentration gradient cathode materials.Furthermore,we prospect that this novel approach will continuously extend its advantages in developing extremely fast charging and Co-free cathode materials in the near future.     

Luminescence of Nanosized Supramolecular Material of Mesoporous Molecular Sieve and Samarium （Ⅲ） Complex

IntroductionThe synthesis of mesoporous silica has greatlyexpanded the possibilities for the design of the porestructure materials[1] . Because of their large sur-face areas and porosity,these materials have greatpotential application in environmental and industri-al fields.A greatmany significant advanced resultshave been achieved in this field including the syn-theses of the related materials[2— 4] ,the develop-ment of the novel properties[5— 8] ,the discovery ofnew theories on synthetic c…     

Crystal Structure of a Novel Supramolecule Made Up of Bis(μ_2-aqua)aqua(3-carboxy acrylate) monosodium(Ⅰ)

IntroductionThe crystal engineering and the design ofsolid- state architectures based on supramoleculesare currently active fields due to their structuraldiversity and many kinds of potentialproperties[1— 7] .Moreover,much attention has beenrecently focused on the use of noncovalentinteractions such as hydrogen bonding andπ-πinteraction,in the creation of a variety ofmoleculararchitectures for molecular self- assembly andrecognition in chemical,physical,and biologicalsciences[8,9] . To exte…     

Soluble Polymer-Supported Synthesis of α-Amino Acid Derivatives

Due to the central role played by α-amino acid in chemistry and biology, the development of versatile and new methodology for the synthesis of natural and unnatural α-amino acid has emerged as an important and challenging synthetic endeavour for organic chemists.[1] Among the various methodologies reported for α-amino acid synthesis, [2,3] the solid-phase organic synthesis (SPOS) has served as an important approach. [4] However, inherent prob lems on solid supports are reactive site accessibility, site-site interaction and monitoring of the reaction.     

Stereoselective Synthesis of α-Aminonitril on Glucose Templates

Both proteinogenic and non proteinogenic α-amino acids are of particular interest as constituents of peptide factors, peptidomimetics and antibiotics for the construction of modern selective drugs. [1] Furthemore, α-amino acid derivatives are interesting building units for chiral-pool syntheses of enantiomerically pure natural products. [2] Numerous efforts in modern organic synthesis are centered on the synthesis of enantiomerically pure α-amino acids. [3] During the past three decades efficient methods of asymmetric synthesis of α-amino acids have been developed; most of them are based on electrophilic transformations of organometallic intermediates. [4] Using the concept that the chirality of the carbohydrates can be exploited for diastereoselective reactions, Kunz and his cooperator had developed a Strecker synthesis with glycosyl amines as chiral auxiliaries. [5]     

Influence of Molecular Structure on the Dimerization Reactivity of Germaaromatic Compounds： a Theoretical Study

Density functional theory (DFT) calculations, at the B3LYP/6-311G** level of theory, were performed to study the reaction mechanism and potential energy surface of the [2 + 2], [4 + 2] and [4 + 4] dimerization reactions of some germaaromatic compounds. The influence of reactant's molecular structure and benzene solvent on the potential energy surface of the studied reactions was investigated. Our calculation results show that [2 + 2] and [4 + 4] reactions are concerted and synchronous processes; while [4 + 2] reactions proceed via a concerted but asynchronous way in general. [2 + 2] and [4 + 2] reactions of germabenzenes and 1-germana- phthalene proceed much more easily than the corresponding [4 + 4] reaction, both thermo- dynamically and kinetically; while most [4 + 2] paths have lower activation barrier than the corres- ponding [2 + 2] ones. As the number of six-membered aromatic rings in reactant molecules becomes larger, [2 + 2], [4 + 2] and [4 + 4] reactions become easier to proceed. The influence of substituents at the Ge atom of germabenzenes on the potential energy surface of [2 + 2] and [4 + 2] reactions correlates with their electronic properties and volume. Solvent effect is not crucial for the potential energy surfaces of the studied reactions.     

Highly active double metal cyanide complexes： Effect of central metal and ligand on reaction of epoxide/CO2

Various novel double metal cyanide (DMC) catalysts were successfully prepared by modifying the central metal (M) and one of cyanide ion (CN-) in Zna[M(CN)b]c complex. Such modifications have significant impact on the catalytic efficiency as well as the polymer selectivity for the reaction of PO/CO2. Zn–Ni(Ⅱ) DMC is a potential catalyst for alternating copolymerization of PO/CO2, and DMC catalysts based on Zn3[Co(CN)5X]2 (X = Br-and N3-) exhibit moderate efficiency for the production of polycarbonates. This research presents the preliminary exploration of novel DMC complex via chemical modification of its central metal and ligand.     

Design and synthesis of self-included pillar[5]arene-based bis-[1]rotaxanes

Two strategies for the design of new pillar[5]arene-based mechanically self-interlocked molecules (MSMs) are reported here. The first strategy is based on the construction of an intermediate pseudo[1]rotaxane followed by the desired bis-[1]rotaxane. The other one is based on the construction of the desired bis-[1]-rotaxane directly via a condensation reaction through host-guest interactions between a mono-functionalized pillar[5]arene and the axle. This compound has interesting self-assembly properties in methanol and some extended applications of this compound will be reported in the near future.     

Adsorption and Reaction of CN ＋ O → OCN on Cu（100） Surface： A Density Functional Theory Study

1 INTRODUCTION The determination of structures of adsorbed cya- nide (CN) and cyanate (OCN) on transition metal surfaces is important for understanding their bon- ding and reactivity in catalysis and other surface phenomena[1～4]. During the past decade, the adsorp- tion of CN and CN-containing on transition metal surfaces has received a great deal of attention in both experimental[5～20] and theoretical[1～5, 13, 20～33] inves-tigations, and the previous work about the adsorp- tion of…     

Donor-Acceptor Oligomers and Polymers Composed of Benzothiadiazole and 3-Hexylthiophene： Effect of Chain Length and Regioregularity

A series of donor-acceptor oligomer OBTThn （n = 1- 7） and polymer PBTThl and PBTTh2 composed of al- ternative 2,1,3-benzothiadiazole and 3-hexylthiophene have been designed and synthesized for the purpose of in- vestigation on the effect of chain length and side-chain regioregularity on their basic properties and photovoltaic performance. In the OBTThn oligomers and PBTThl polymer, all the hexyl side chains on thienyl units orient to- ward the same direction. Upon elongation of the chain length, the intramolecular charge transfer （ICT） absorption band in solution gradually redshifts from 398 nm for OBTThl to 505 nm for OBTThT, then to 512 nm for PBTThl polymer. Meanwhile, the HOMO energy level increases from -5.45 eV （OBTTh0 to -5.08 eV （OBTThT） and -5.09 eV （PBTThl）, and the LUMO energy level decreases from -3.11 eV （OBTTh0 to -3.30 eV （OBTThT） and -3.33 eV （PBTThl）, thus giving a smaller and smaller energy bandgap for higher oligomers and polymers. Theo- retical calculation suggests straight line-like backbone geometry for this series of oligomers and polymer. On the other hand, polymer PBTTh2 possesses a different side-chain regioregularity, in which every two neighbor hexyl side chains are arranged in different orienting direction. It is theoretically suggested to have curved line-like back- bone geometry. In solution, it shows similar photophysical and electrochemical properties as PBTThl. However in film state, it displays a less redshift in the ICT band as refer to that in solution than PBTThl. In combination with [6,6]-phenyl-C61-butyric acid methyl ester （PC61BM）, these oligomers and polymers were used as donor material to fabricate organic bulk heterojunction solar cells. Again, chain length-dependent device photovoltaic performance was observed. The device based on OBTTh4 showed a power conversion efficiency of 0.16%, while it increased to 0.36% and 0.49% for the devices based on OBTTh6 and PBTThb respectively. However, the side-chain regio- regularity has less influence on the device photovoltaic output since the device based on PBTTh~ displayed an effi- ciency of 0.52%, comparable to that of PBTThl.     

Quantum chemical calculations based on ONIOM and the DFT methods in the inclusion complex: doxycycline/2-O-Me-β-cyclodextrin

A computational study of inclusion complexes of 2-methyl-βCD with Doxycycline tautomeric (enol and keto form) has been performed with several combinations of ONIOM hybrid calculations. The reliability of the ONIOM2 calculations at the integrated level, ONIOM2 (M05-2X/6-31G(d): M05-2X/3-21G*), ONIOM2 (M05-2X/6-31G(d):HF/3-21G*), ONIOM2 (B3LYP/6-31G(d):HF/3-21G*), ONIOM2 (B3LYP/6-31G(d):B3LYP/3-21G*) and ONIOM2 (B3PW91/6-31G(d):B3PW91/3-21G*) was examined. Their complexation, binding, deformation and stabilization energies, and geometrical data were compared with those of the target geometry structure optimized at the M05-2X/6-31G(d) level of theory. Mixed combinations ONIOM2 (M05-2X 6-31G(d):HF 3-21G*) and ONIOM2 (B3LYP 6-31G(d):HF 3-21G*) reproduces nearly the target geometry structure and provides realistic energetic results at a relatively low computational cost.     

硝酸甲酯分子间相互作用的DFT和ab initio比较

用密度泛函理论(DFT)和从头算(ab initio)方法,分别在B3LYP/6 31G和HF/6 31G水平上求得硝酸甲酯三种二聚体的全优化几何构型和电子结构,并用6 311G和6 311＋＋G基组进行总能量计算.对HF/6 31G计算结果进行MP4SDTQ电子相关校正.在各基组下均进行基组叠加误差(BSSE)和零点能(ZPE)校正求得结合能.对6 31G优化构型作振动分析并基于统计热力学求得200～600 K温度下单体和二聚体的热力学性质.详细比较两种方法的相应计算结果,发现DFT求得的分子间距离较短,分子内键长较长,所得结合能均小于相应ab initio计算值.     

An ab initio study of intermolecular interactions of nitromethane dimer and nitromethane trimer

Different geometries of nitromethane dimer and nitromethane trimer have been fully optimized employing the density functional theory B3LYP method and the 6-31++G** basis set. Three-body interaction energy has been obtained with the ab initio supermolecular approach at the levels of MP2/6-31++G**//B3LYP/6-31++G** and MP2/aug-cc-pVDZ//B3LYP/6-31++G**. The internal rotation of methyl group induced by intermolecular interaction has been observed theoretically. For the optimized structures of nitromethane dimer, the strength of C--H...O--N H-bond ranges from -9.0 to -12.4 kJ mol(-1) at the MP2/aug-cc-pVDZ//B3LYP/6-31++G** level, and the B3LYP method underestimates the interaction strength compared with the MP2 method, while MP2/6-31++G**//B3LYP/6-31++G** calculated DeltaE(C) is within 2.5 kJ mol(-1) of the corresponding value at the MP4(SDTQ)/6-31G**//B3LYP/6-31++G** level. The analytic atom-atom intermolecular potential has been successfully regressed by using the MP2/6-31++G**//B3LYP/6-31++G** calculated interaction energies of nitromethane dimer. For the optimized structures of nitromethane trimer the three-body interaction energies occupy small percentage of corresponding total binding energies, but become important for the compressed nitromethane explosive. In addition, it has been discovered that the three-body interaction energy in the cyclic nitromethane trimer is more and more negative as intermolecular distances decrease from 2.2 to 1.7 A.     

苯在Si(111)-7*7表面化学吸附的理论研究

采用两种大小不同的原子簇模型Si_(30)H_(28)和Si_(13)H_(16),分别用两层 ONIOM方法（对较大原子簇）和普通量子化学方法（对较小原子族）考察了苯分子 在Si(111)-7 * 7表面的化学吸附。对三种可能的吸附物种分别用DFT或HF方法进行 了计算。通过大小原子簇吸附物种的吸附能以及几何构型优化参数的比较发现,对 于稳定的吸附物种,较小的原子簇基本上可以代替较大的原子簇进行计算,而对于 不太稳定的吸附物种,就不得不考虑周边原子的影响。计算结果表明苯在Si(111)- 7 * 7表面的主要吸附种是双σ成键的1,4加成产物,不稳定的单吸附物种可能是 1,4加成物种的前驱态。     

A theoretical investigation on the potential energy surface of CN2H rotation of the encapsulated 1-bicyclo[2.2.1]heptyldiazirine

The potential energy surface (PES) of CN₂H rotation of the encapsulated 1-bicyclo[2.2.1]heptyldiazirine (BHD) inside a molecular container: Cram’s hemicarcerand (CH) was explored using two different DFT involved ONIOM methods: B3LYP/6-31G^**//ONIOM(B3LYP/6-31G^*: AM1) and B971/6-31G^**//ONIOM(B971/6-31G^*: AM1). The free-state PES of CN₂H rotation was also calculated, respectively by B3LYP/6-31G^**//B3LYP/6-31G^* and B971/6-31G^**//B971/6-31G^* methods for comparison. The findings in this study have shown that the PES profiles differ from each other notably in the two states. In the encapsulated state the rotation barrier corresponding to the free-state conversion with the largest rotation barrier increases by about 2 kcal/mol, which has exceeded the largest rotation barrier in the free-state. The conformational preference behavior towards certain BHD isomers, which might be in better conformational compatibility with the container, has been demonstrated.     

Adsorption of NH(3) and H(2)O in acidic chabazite. Comparison of ONIOM approach with periodic calculations

The adsorption of NH(3) and H(2)O in acidic chabazite has been studied with the B3LYP method within the cluster approach (5T, 48T clusters) and the periodic approach adopting a Si/Al = 11/1 chabazite and a basis set of polarized double-zeta quality. The 5T cluster has been treated fully ab initio at the B3LYP level whereas the 48T cluster has been treated with the ONIOM2 scheme using B3LYP as the high level of theory and the MNDO, AM1, and HF/3-21G methods as low levels of theory. Periodic calculations show that the adsorption of NH(3) in acidic chabazite takes place through an ion pair (NH(4)(+)-CHA(-)) structure, the computed adsorption energy being -32 kcal/mol. The adsorption of H(2)O leads to a hydrogen bonded (H(2)O-HCHA) complex with the computed adsorption energy of -20 kcal/mol. All ONIOM combinations provide similar structures to those obtained with periodic calculations. Adsorption energies, however, are sensitive to the low level used, especially for NH(3). The ONIOM B3LYP:HF/3-21G method is the one that provides more satisfactory results. Present results show that, for larger zeolites, the ONIOM scheme can be successfully applied while drastically reducing the cost of a fully ab initio treatment.     

可乐定分子构象异构和互变异构的理论研究

采用HF/6-31G*方法, 对氨基型和亚胺型可乐定中性分子以及质子化的可乐定分子进行了构象分析. 之后采用B3LYP/6-31G**方法对处于势能面上的能量极小构象异构体进行全自由度几何优化和频率分析. Onsager反应场溶剂模型用于水相的计算. 结果表明, 在气相和水相中可乐定中性分子主要以亚胺型存在, 这同已有实验结果一致. 进一步, 寻找构象异构化过渡态和氨基型亚胺型互变异构化过渡态, 探讨质子化和水溶剂化效应对异构化过程的几何结构和能量的影响. 为了考察氯苯的共轭效应对可乐定互变异构体稳定性的影响, 在B3LYP/6-31G**水平上, 研究了2-氨基-2-咪唑啉的互变异构化反应机理.     

Theoretical studies on the gas-phase pyrolysis of 2-phenoxycarboxylic acids: an ONIOM approach

Various ONIOM combinations-ONIOM(HF/6-31G*: PM3), ONIOM(B3LYP/6-31G*: PM3), ONIOM(MP2/6-31G*: PM3), and ONIOM(MP2/6-31G*: HF/3-21G)--were applied to investigate thermal decomposition mechanisms of four 2-phenoxycarboxylic acids (2-phenoxyacetic acid, 2-phenoxypropionic acid, 2-phenoxybutyric acid, and 2-phenoxyisobutyric acid) in the gas phase. All the transition states and intermediates of the reaction paths were optimized. The reaction pathway of four reactants yielding the phenol, CO, and the corresponding carbonyl compound was characterized on the potential energy surface and found to proceed stepwise. The first step corresponds to the elimination of phenol and the formation of alpha-lactone intermediate through a five-membered ring transition state, and the second step is the cycloreversion process of alpha-lactone intermediate to form CO and the corresponding carbonyl compound. The reaction pathway of latter three compounds to produce the carboxylic acid and phenol via a four-membered cyclic transition structure was also examined theoretically. Comparison with experiment indicates that the activation parameters for the fist reaction channel are accurately predicted at the ONIOM(MP2/6-31G*: HF/3-21G) level of theory.     

QSPR Studies on lgK_(ow) and lgK_(oc) of Fluorobenzenes and Property Parameters Based on HF and DFT Calculations

1 INTRODUCTION Quantitative structure-activity relationship (QSAR) equation could be employed to predict the biological activities of unknown compounds, which is signifi- cant for initial screening and evaluation of toxic compounds[1]. Soil sorption coeff…     

Si~2Cl~6分子的内旋转能垒和振动基频的理论研究

用从头算方法HF/6-31G^*^*和密度函方法B3LYP/6-31G^*^*,对Si~2Cl~6分子的平衡几何构型进行优化,优化的结果与实验结果吻合得较好.并用上述两种不同的方法计算Si~2Cl~6分子的内旋转能垒,结果分别为8.786和6.694kJ/mol,其中DFT方法的计算结果与实验结果4.18kJ/mol吻合得较好.对Si~2Cl~6分子的振动基频进行计算.用HF/6-31G^*^*SQM力场所计算的频率理论值与实验值的平均误差为7.3cm^-^1,用B3LYP/6-31G^*^*未标度的力场所计算的频率理论值与实验值的平均误差为6.0cm^-^1.该密度泛函方法(B3LYP/~6-31G^*^*)的理论计算值比用HF/6-31G^*^*标度后的SQM力场计算的频率与实验值(除Si--Si键扭转振动基频之外的11条振动基频)吻合得更好.并给出了Si--Si键扭转振动基频的预测值。