Determination of Labetalol Hydrochloride in Drug Formulations by Spectrophotometry

A validated, selective and sensitive spectrophotometric method has been developed for the determination of labetalol hydrochloride in commercial dosage forms. The method is based on the coupling reaction of positive diazonium ion of 4‐aminobenzenesulfonic acid with phenolate ion of labetalol to form a colored azo compound which absorbs maximally at 395 nm. Under the optimized experimental conditions, the color is stable up to 2 h and Beer's law is obeyed in the concentration range of 0.8–17.6 μg mL^?1 with a linear regression equation of A = 4.84 × 10^?4 + 7.864 × 10^?2 C and coefficient of correlation, r = 0.9999. The molar absorptivity and Sandell's sensitivity are found to be 2.874 × 10⁴ L mol^?1 cm^?1 and 0.013 μg cm^?2 per 0.001‐absorbance unit, respectively. The limits of detection and quantitation of the proposed method are 0.08 and 0.23 μg mL^?1, respectively. The intra‐day and inter‐day precision variation and accuracy of the proposed method is acceptable with low values of standard analytical error. The recovery results obtained by the proposed method in drug formulations are acceptable with mean percent recovery ± RSD of 99.97 ± 0.52 ‐ 100.03 ± 0.63%. The results of the proposed method compared with those of Bilal's spectrophotometric method indicated excellent agreement with acceptable true bias of all samples within ± 2.0%.     

Micellar‐Enhanced Spectrofluorimetric Determination of Trazodone Hydrochloride in Human Urine and Serum

Abstract

A novel developed spectrofluorimetric method for the determination of trazodone hydrochloride in the presence of sodium dodecyl sulfate (SDS) surfactant micelles was described. Under optimal conditions, there was a good linear relationship between fluorescence intensity and trazodone hydrochloride concentration in the range of 4.0×10^?9 to 8.0×10^?6 mol · l^?1with the detection limit of 1.3×10^?9 mol · l^?1 (S/N=3). This method has been used to determine trazodone hydrochloride in biological fluids.     

Post‐chemiluminescence Method of the Determination of Loperamide Hydrochloride in Human Plasma and Pharmaceutical by Using Dichlorofluorescein as Chemiluminescence Reagent

Abstract

A post‐chemiluminescence (PCL) was observed when loperamide hydrochloride solution was injected into the reaction mixture after the finish of CL reaction of alkaline N‐Chlorosuccinimide (NCS) and dichlorofluorescein. Based on this phenomenon, a simple, sensitive and fast flow injection PCL method was established for the determination of loperamide hydrochloride. The possible mechanism for the PCL reaction was discussed via the investigation of the CL kinetic characteristics, the CL spectra, the fluorescence spectra. The PCL intensity responded linearly to the concentration of loperamide hydrochloride in the range 8.0×10^?10 to 6.0×10^?7 g · ml^?1 with a linear correlation of 0.9995. The detection limit was 4×10^?10 g · ml^?1. The relative standard deviation was 2.4% for 4.0×10^?8 g · ml^?1 loperamide hydrochloride (n=11). This method has been applied to the determination of loperamide hydrochloride in human plasma and pharmaceutical samples with satisfactory results.     

Assay of Phenformin Hydrochloride in Pharmaceutics by Coupling with Sodium Nitroprusside

A novel and simple spectrophotometric method for the determination of phenformin hydrochloride using sodium nitroprusside as chromogenic reagent is developed in this paper. The experiment indicates that the sodium nitroprusside can react with the phenformin hydrochloride in a basic solution to form a product with colored N‐nitrosamines. The stoichiometric ratio of phenformin hydrochloride and sodium nitroprusside is 1:3 in the product. The maximal absorption wavelength (λ_max) of the product is 520 nm, ?₅₂₀ = 2.2 × 10³ Lmol^?1cm^?1. A Good linear relationship is obtained between the absorbance (A) and the concentration (C) of phenformin hydrochloride in a wide range of 0.20‐400 μg mL^?1. The equation of the linear regression is A = 0.03461 + 0.00907C (μg mL^?1) with a linear correlation coefficient of 0.9991. The detection limit is 0.13 μg mL^?1, and the relative standard deviation (R.S.D.) is 0.19%. The method is successfully applied to the determination of phenformin hydrochloride in tablet forms, and satisfactory recoveries are obtained.     

Flow‐Injection Chemiluminescence Analysis of Cloperastione Hydrochloride

Abstract

A new chemiluminescence (CL) reaction was observed when cloperastine hydrochloride was injected into the reaction mixture after the CL reaction of Ce(IV) and sodium sulfite finished. A new flow injection CL method for the determination of cloperastine hydrochloride was established based on the CL reaction. The relative standard deviation (RSD) for the determination of cloperastine hydrochloride was 1.3% (n=11, c=1.0×10^?6 g/mL). The CL intensity responded linearly to the concentration of cloperastine hydrochloride in the range 2.0×10^?7～2.0×10^?5 g/mL (r=0.9962). The detection limit was 5×10^?8 g/mL cloperastine hydrochloride. The method had been applied to the determination of cloperastine hydrochloride in tablets with satisfactory results.     

Quantitation of Diltiazem Hydrochloride in Commercial Dosage Forms by Visible Spectrophotometry

A selective and sensitive visible spectrophotometric method has been described for the quantitation of diltiazem hydrochloride in commercial dosage forms. The method is based on the reaction of the tertiary amino group of the drug with sodium hypochlorite to form the chloro drug derivative, followed by the destruction of the excess hypochlorite by sodium nitrite and the subsequent development of blue color takes place by the reaction of chloro derivative of drug with starch and potassium iodide in sodium bicarbonate medium. The maximum absorbance of the resulting blue solution is read at 540 nm. Under the optimized experimental conditions, Beer's law is obeyed in the concentration range of 2.5–25.0 μg mL^?1 with a linear regression equation of A = 9.85 × 10^?4 + 4.90 × 10^?2 C and coefficient of correlation, r = 0.9999. The molar absorptivity is found to be 2.26 × 10⁴L mol^?1 cm^?1. The limits of detection and quantitation of the proposed method are 0.12 and 0.37 μg mL^?1, respectively. The proposed method has been successfully applied for the quantitation of diltiazem hydrochloride in commercial dosage forms. The results of the proposed method compared with those of Abdellatef's spectrophotometric method presented good mean recovery with acceptable true bias of all pharmaceutical samples within ± 2.0%.     

Application of Membrane-Selective Electrodes for the Determination of Pioglitazone Hydrochloride in the Presence of Its Acid Degradant or Metformin Hydrochloride in Tablets and Plasma

Abstract

Polyvinyl chloride (PVC) membrane sensors for the determination of pioglitazone hydrochloride (PIO) and metformin hydrochloride (MET) were described by using the ion association complexes between these drugs with either sodium tetraphenyl-borate (TPB) or ammonium reineckate (RNC) counter ions. The performance characteristics of the sensors were evaluated according to IUPAC recommendations, reveal a fast, stable and linear response over the concentration range 3.162 × 10^?5 ? 1 × 10^?2 M for PIO and 1 × 10^?3 ? 1 × 10^?1 M for MET. The sensors are used for determination of PIO and MET in tablets and plasma. The developed method was found to be simple, accurate and precise when compared with the reported method.     

Determination of Ultratrace Silver Using Surfactant as Sensitizer by Catalytic Near Field Laser Thermal Lens Spectrometry

Introduction Thermal lens spectrometry (TLS) is an excellent method for trace analysis.1-3 Methods classified as TLS are based upon a thermal change in the optical proper-ties of a sample on the absorption of laser energy which leads to a temperature rise in the sample and conse-quently to the formation of an inhomogeneous spatial profile of the refractive index. The change in the diver-gence of a laser beam on the resulting optical element (thermal lens) is proportional to the amount of abs…     

Resonance Rayleigh Scattering Method for the Determination of Raloxifene with Evans Blue

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｒｅｃｅｎｔｙｅａｒｓ ,ｒｅｓｏｎａｎｃｅＲａｙｌｅｉｇｈｓｃａｔｔｅｒｉｎｇ(ＲＲＳ)ｍｅｔｈｏｄａｓａｎｅｗａｎａｌｙｔｉｃａｌｔｅｃｈｎｉｑｕｅｈａｓｂｅｅｎｅｘｔｅｎｓｉｖｅｌｙｓｔｕｄｉｅｄａｎｄｗｉｄｅｌｙｕｓｅｄｔｏｔｈｅｄｅｔｅｒｍｉｎａｔｉｏｎｏｆｓｏｍｅｂｉｏｌｏｇｉｃａｌｍａｃｒｏｍｏｌｅｃｕｌｅｓ ,ｓｕｃｈａｓｎｕｃｌｅｉｃａｃｉｄ ,1 4 ｐｒｏｔｅｉｎ5 8ａｎｄｈｅｐａｒｉｎ ,9ａｓｗｅｌｌａｓｉｎｏｒｇａｎｉｃｉｏｎ ,10 14 ｄｕｅｔｏｉｔｓｓｉ…     

Construction and Performance Characterization of Ion‐Selective Electrodes for Potentiometric Determination of Paroxetine Hydrochloride in Pharmaceutical Preparations and Biological Fluids

Three types of ion‐selective electrodes: PVC membrane, modified carbon paste (CPE), and coated graphite electrodes (CGE) have been constructed for determining paroxetine hydrochloride (Prx). The electrodes are based on the ion pair of paroxetine with sodium tetraphenylborate (NaTPB) using dibutyl phthalate as plasticizing solvent. Fast, stable and potentiometric response was obtained over the concentration range of 1.1×10^?5–1×10^?2 mol L^?1 with low detection limit of 6.9×10^?6 mol L^?1 and slope of a 56.7±0.3mV decade^?1 for PVC membrane electrode, the concentration range of 2×10^?5–1×10^?2 mol L^?1 with low detection limit of 1.2×10^?5 mol L^?1 and slope of a 57.7±0.6 mV decade^?1 for CPE, and the concentration range of 2×10^?5–1×10^?2 mol L^?1 with low detection limit of 8.9×10^?6 mol L^?1 and slope of a 56.1±0.1 mV decade^?1 for CGE. The proposed electrodes display good selectivity for paroxetine with respect to a number of common inorganic and organic species. The electrodes were successfully applied to the potentiometric determination of paroxetine hydrochloride in its pure state, its pharmaceutical preparation, human urine and plasma.     

Spectrophotometric Determination of Ondansetron Hydrochloride in Pharmaceutical Bulk and Dosage Forms

A rapid, simple and accurate spectrophotometric method is developed for the determination of ondansetron hydrochloride in pure and tablet formulations. The method depends on the charge‐transfer complexation between ondansetron base as n‐electron donor with chloranil as π‐acceptor to give a colored complex, which absorbs maximally at 470 nm. Beer's law is obeyed in the concentration ranges 70–980 μg mL^?1 with molar absorptivity of 4.47 × 10² L mole^?1 cm^?1. The proposed method is precise, accurate and specific for the quantitative determination of drug in bulk and tablet formulations.     

Study of Spectrophotometric Determination of Amoxicillin Using Sodium 1,2‐Naphthoquinone‐4‐Sulfonate as the Chemical Derivative Chromogenic Reagent

Abstract

A simple and sensitive spectrophotometric method is described for determination of amoxicillin. The method is based on a nucleophilic substitution reaction to measure the pink compound produced by the reaction of amoxicillin with sodium 1,2‐naphthoquinone‐4‐sulfonate in pH 9.00 buffer solution. The stoichiometric ratio of the compound is 1:1, and its maximum absorption wavelength is at 468 nm, ε=3.91×10³ L · mol^?1 · cm^?1. The Beer's law is obeyed in the range of 0.8–120 µg · mL^?1 of amoxicillin. The linear regression equation is A=0.041239+0.22128 C, with 0.9994 of a linear regression correlation coefficient. The detection limit is 2.0 µg · mL^?1, and average recovery is over 98.5%. This paper further optimizes the determination of amoxcillin compared to the previous methods, and the kinetic property and reaction mechanism are studied intensively. This proposed method has been successfully applied to the determination of amoxicillin in tablets and capsules. The results obtained by this method agreed well with those by the official method high pressure liquid chromatography (HPLC).     

Determination of Gallic Acid by Flow Injection Analysis Based on Luminol‐AgNO3‐Ag NPs Chemiluminescence System

A novel flow injection procedure has been developed for the determination of gallic acid based on the enhancement function for luminol‐AgNO₃‐Ag NPs chemiluminescence (CL) system by gallic acid. The enhancement mechanism was proposed for the reinforcing effect of the gallic acid on the CL system. The UV‐vis absorption spectrum and CL emission spectrum were applied to confirm the mechanism. The method is simple, rapid and sensitive with a detection limit of 5×10^?10 g·mL^?1 and a linear range of 8.0×10^?10–1.0×10^?7 g·mL^?1. The relative standard deviation (RSD) is 1.3% for eleven measurements of 5×10^?8 g·mL^?1 gallic acid. The method has been successfully applied to the determination of gallic acid in Chinese proprietary medicine–Jianmin Yanhou tablets and synthesized samples.     

Biamperometric Determination of Tetracycline in Pharmaceuticals

Abstract

A fast, reliable, and low cost biamperometric flow‐injection method, with an error of 1.3% and an analytical throughput of 55 samples h^?1, for determination of tetracycline hydrochloride in pharmaceuticals capsules is proposed. The analytical curve was linear (r=0.998) in the range 10 to 50 mg l^?1 using Fe(CN)₆ ^3? and NaOH solutions as reagent and carrier stream/supporting electrolyte, respectively. A relative standard deviation of 1.6% (10 sequential injections of 30.0 mg l^?1) was verified with detection and quantification limits of 0.6 and 3.4 mg l^?1, respectively.     

Construction and Validation of New Electrochemical Carbon Nanotubes Sensors for Determination of Acebutolol Hydrochloride in Pharmaceuticals and Biological Fluids

A simple, rapid and a highly selective method for direct electrochemical determination of acebutolol hydrochloride (AC) was developed. The developed method was based on the construction of three types of sensors conventional polymer (I), carbon paste (II) and modified carbon nanotubes (MCNTs) carbon paste (III). The fabricated sensors depend mainly on the incorporation of acebutolol hydrochloride with phosphotungstic acid (PTA) forming ion exchange acebutolol‐phosphotungstate (AC‐PT). The performance characteristics of the proposed sensors were studied. The sensors exhibited Nernstian responses (55.6 ± 0.5, 57.14 ± 0.2 and 58.6 ± 0.4 mV mol L^?1) at 25 °C over drug concentration ranges (1.0 × 10^?6‐1.0 × 10^?2, 1.0 × 10^?7‐1.0 × 10^?2 and 5.0 × 10^?8‐1.0 × 10^?2 mol L^?1 with lower detection limits of (5.0 × 10^?7, 5.0 × 10^?8 and 2.5 × 10^?8 mol L^?1 for sensors (I), (II) and (III), respectively. The influence of common and possible interfering species, pharmaceutical additives and some related pharmacological action drugs was investigated using separate solution method and no interference was found. The stability indicating using forced degradation of acebutolol hydrochloride was studied. The standard addition method was used for determination of the investigated drug in its pharmaceutical dosage forms and biological fluids. The results were validated and statistically analysed and compared with those from previously reported methods.     

Flow Injection Chemiluminescence Determination of Difenidol Hydrochloride Using N-Chlorosuccinimide-Dichlorofluorescein Reaction

Abstract

A flow injection method combined with chemiluminescence detection was described for the determination of difenidol hydrochloride. Strong chemiluminescence was recorded when difenidol hydrochloride was added into the reaction mixture of N-chlorosuccinimide with dichlorofluorescein in alkaline medium. The experimental conditions that affected the chemiluminescence signal, including the concentrations of reactants, the reaction medium, and the instrumental parameters, were carefully optimized. Under the optimum experimental conditions, the enhanced chemiluminescence intensity was linear related to the concentration of difenidol hydrochloride in the range of 4.0 × 10^?9 to 4.0 × 10^?7 g/ml. The detection limit for difenidol hydrochloride was 7 × 10^?10 g/ml, and the sample throughput was 90/h. The relative standard deviation was 2.5% for 5.0 × 10^?8 g/ml difenidol hydrochloride solution (n = 11). The interference of common inorganic ions, excipients, and additives used in pharmaceutical preparation was studied, which showed the method has higher tolerance limit for these substances and has good selectivity. As a preliminary application, the method was applied to the determination of difenidol hydrochloride in tablets, and the satisfactory results were achieved.     

Spectrophotometric Study of Isoniazid by Using 1,2‐Naphthoquinone‐4‐Sulfonic Acid Sodium as the Chemical Derivative Chromogenic Reagent

A new method for the determination of isoniazid by using 1,2‐naphthoquinone‐4‐sulfonic sodium as the chemical derivative chromogenic reagent is established. The method is based on a condensation reaction to measure the pink compound produced by the reaction of isoniazid with 1,2‐naphthoquinone‐4‐sulfonic sodium in pH 13.00 buffer solution. The stoichiometric ratio of the compound is 1:1, and its maximum absorption wavelength is at 460 nm, ? = 1.18 × 10⁴ L·mol^?1 cm^?1. Beer's law is perfectly obeyed in the range of 0.50?30 μg.mL^?1 of isoniazid. The linear regression equation is A = 0.0185 + 0.11056C (mol.L^?1), with 0.9994 of a linear regression correlation. The detection limit is 0.40 μg.mL^?1, RSD is 0.48%, and average recovery is over 99.3%. This paper further optimizes the determination of isoniazid compared to the previous methods, and the kinetic property and reaction mechanism are studied intensively. This proposed method has been successfully applied to the determination of isoniazid in tablets of isoniazid with satisfactory results.     

Spectrophotometric Determination of Acebutolol Hydrochloride and Nicoumalone with Metol and Potassium Permanganate

Abstract

A spectrophotometric method is described for the determination of Nicoumalone and Acebutolol hydrochloride based on the formation of molecular complex with the reduction product of Nicoumalone or hydrolysis product of Acebutolol hydrochloride and p-N-methyl benzoguinone monoimine [formed in situ from met01 (p-N-methylaminophenol sulfate) and potassium permanganate, PMBQMI] at pH 3.3. Quantitative measurements were made at the maximum absorption of 525 nm. Beer's law is obeyed in the range of 5–50 μg ml^?1 and 5–60 μg ml^?1 for Nicoumalone and Acebutolol hydrochloride respectively. The proposed method is comparable with the reference method when applied to pharmaceutical preparations, and tablets, An average percentage recovery of 99.5 ± 0.8 was obtained.     

Flow Injection Spectrophotometric Determination of the Antibacterial Levofloxacin in Tablets and Human Urine

Abstract

A sensitive and fast flow‐injection (FI) spectrophotometric method for the determination of levofloxacin based on the formation of a colored product upon oxidation with N‐bromosuccinimide (NBS) in acidic medium is proposed. Optimization of chemical and FI variables has been made. Under the optimized conditions, the sampling rate was over 90 h^?1, the calibration curve obtained was linear over the range 10–300 µg·mL^?1, and the detection limit was 3 µg·mL^?1. The proposed method was successfully applied to the determination of levofloxacin in pharmaceuticals and human urine samples. It was also found that the excipients in the commercial tablet preparation did not interfere with the assay. Results are precise (RSD<2.7%; n =10) and in agreement with those found by the reference high pressure liquid chromatography (HPLC) procedure.     

Chemiluminescence Determination of Organophosphorus Pesticides Chlorpyrifos in Vegetable

Abstract

A novel chemiluminescence method for the quantitative assay of the organophosphorus pesticide chlorpyrifos in vegetable samples is presented. The determination is based on the reaction of chlorpyrifos with luminol-H₂O₂ in alkaline medium with sodium chloride being enhancer. Under the optimum conditions, the increased CL intensity was proportional with the concentration of chlorpyrifos in the range of 1.0 × 10^?8 g · ml^?1 ? 1.0 × 10^?6 g · ml^?1 and the detection limit was 3.5 × 10^?9 g · ml^?1 (3σ). The relative standard is less than 3.9% for 5.0 × 10^?7g · ml^?1 chlorpyrifos (n = 7). This method has been successfully applied to the determination of chlorpyrifos residue in vegetable sample. Further study was focused on the mechanism of chlorpyrifos and the possible mechanism was proposed.