聚丙烯酸叔丁酯-b-聚(N-异丙基丙烯酰胺)嵌段共聚物的制备及其自组装

以氯化亚铜/N,N,N′,N″,N″-五甲基二乙撑三胺为催化体系、丁酮和异丙醇为混合溶剂,采用原子转移自由基聚合法制备了大分子引发剂聚丙烯酸叔丁酯(PtBA-Cl)和聚丙烯酸叔丁酯-b-聚(N-异丙基丙烯酰胺)(PtBA-b-PNIPAM)两亲性嵌段共聚物.用红外光谱和核磁共振谱表征 PtBA-b-PNIPAM 嵌段共聚物的结构,动态光散射及透射电镜研究嵌段共聚物在溶液中的温度响应性.结果表明:胶束的体积相转变温度在 33℃左右;随着温度的增加,胶柬的粒径逐渐减小.     

两亲性嵌段共聚物PAA-b-PS的合成及胶束形态

通过丙烯酸叔丁酯的自由基调聚和苯乙烯的原子转移自由基聚合（ATRP）法合成了聚丙烯酸叔丁酯-聚苯乙烯（PtBA-b-PS）嵌段共聚物,然后在三氟乙酸作用下进行选择性水解得到了两亲性聚丙烯酸-聚苯乙烯（PAA-b-PS）嵌段共聚物。利用1H-NMR、FT-IR和GPC对产物的结构进行了表征。采用透析法制备了PAA-b-P...     

多臂聚丙烯酸丁酯-b-聚甲基丙烯酸甲酯嵌段共聚物的合成及性能研究

采用电子转移再生催化剂原子转移自由基聚合(ARGET ATRP)制备了端羟基聚丙烯酸丁酯-b-聚甲基丙烯酸甲酯嵌段共聚物(HO-PBA-b-PMMA),在此基础上,与六亚甲基二异氰酸酯三聚体(N3390)反应,合成了多臂聚丙烯酸丁酯-b-聚甲基丙烯酸甲酯嵌段共聚物.通过凝胶渗透色谱(GPC)、核磁共振仪(1H-NMR)、傅里叶变换红外光谱计(FTIR)对聚合物的结构进行了表征,利用原子力显微镜(AFM)观察了其形貌,采用动态热机械分析仪(DMA)和万能拉伸机研究了聚合物的热性能、力学性能及多臂嵌段共聚物对PMMA的增韧性能.结果表明:成功制备了端羟基聚丙烯酸丁酯-b-聚甲基丙烯酸甲酯,以及多臂聚丙烯酸丁酯-b-聚甲基丙烯酸甲酯嵌段共聚物.在异氰酸酯基/羟基(NCO/OH)摩尔比为1.2/1时,制得的多臂嵌段共聚物相对分子质量最大,Mark-Houwink参数α值最小,表明此时三臂嵌段共聚物最多.多臂嵌段聚合物的拉伸强度和断裂伸长率比线型聚合物均有明显提高,且在NCO/OH摩尔比为1.2/1时达到最大,分别为7.6 MPa和73%.多臂嵌段聚合物具有更高的玻璃化转变温度(Tg).通过原子力显微镜(AFM)表明,多臂聚丙烯酸丁酯-b-聚甲基丙烯酸甲酯嵌段共聚物形成了以聚丙烯酸丁酯链段为核,聚甲基丙烯酸甲酯为壳的核壳结构.具有核壳结构的多臂聚丙烯酸丁酯-b-聚甲基丙烯酸甲酯嵌段共聚物对聚甲基丙烯酸甲酯有明显的增韧作用.     

ATRP法合成两亲性嵌段共聚物PSt-b-PAA及其在离子液体[BMIM][PF6]中的自组装行为研究

利用原子转移自由基聚合法(ATRP)合成了分子量可控、分子量分布窄的嵌段共聚物聚苯乙烯-b-聚丙烯酸叔丁酯(PSt-b-PtBA), 进而在酸性条件下由水解反应得到了两亲性嵌段共聚物聚苯乙烯-b-聚丙烯酸(PSt-b-PAA), 并通过凝胶渗透色谱(GPC)、傅立叶变换红外光谱(FTIR)、核磁共振(1H NMR)等测试手段对产物进行了表征. 使三种分子量不同的两亲性嵌段共聚物在离子液体1-丁基-3-甲基咪唑六氟磷酸盐([BMIM][PF6])中进行自组装, 通过激光粒度分析仪(DLS)和透射电子显微镜(TEM)研究了聚合物在离子液体中自组装的胶束尺寸和结构形态. 当PSt的链段长度一定时, 胶束的形状主要依赖于PAA链的长度. 当PAA链段较长时, 胶束呈球形; 当PAA链段较短时, 则变成不规则的花生状胶束.     

结晶/无定形PMMA-b-PHBV-b-PMMA三嵌段共聚物的合成及热稳定性表征

以生物质聚酯聚(3-羟基丁酸酯-co-3-羟基戊酸酯)(PHBV)为结晶组分、聚甲基丙烯酸甲酯(PMMA)为无定形组分,通过原子转移自由基聚合法(ATRP)制备了ABA型结晶/无定形三嵌段共聚物.采用凝胶色谱法(GPC)、傅里叶红外光谱(FTIR)和核磁共振氢谱(1H-NMR)表征了三嵌段共聚物的分子量及其分子量分布和化学结构;使用热失重分析仪(TG)测试了三嵌段共聚物的热稳定性,并通过Horowitz-Metzger法计算了嵌段共聚物的降解表观活化能.研究表明,三嵌段共聚物的最大转化产率为92.39%;当单体与大分子引发剂的比例为8∶1时,三嵌段共聚物的T0、T5%、T max温度分别提高25 K、15 K和40 K,三嵌段共聚物降解表观活化能E a可由纯PHBV的428.25 kJ·mol-1降低至169.83 kJ·mol-1.     

基于聚亚甲基的三嵌段聚合物:合成及其多孔薄膜的制备

利用叶立德活性聚合与原子转移自由基聚合(ATRP)相结合的方法制备得到基于聚亚甲基的两、三嵌段聚合物.首先由叶立德活性聚合及氧化反应得到末端羟基的聚亚甲基(PM-OH),再与2-溴异丁酰溴反应得到含溴末端的大分子引发剂(PM-Br),之后引发丙烯酸叔丁酯的ATRP聚合得到聚亚甲基-b-聚丙烯酸叔丁酯(PM-b-P-t-...     

自组装制备聚(丙烯酸叔丁酯-b-甲基丙烯酸二甲胺基乙酯)壳交联胶束

以1-氯代乙苯为引发剂、氯化亚铜/N,N,N′,N″,N″-五甲基二乙撑三胺(PMDETA)为催化体系、丁酮-异丙醇为混合溶剂,通过原子转移自由基聚合法制备不同分子量的大分子引发剂聚丙烯酸叔丁酯(1-PECl)及不同嵌段比的两亲性嵌段共聚物聚(丙烯酸叔丁酯-b-甲基丙烯酸二甲胺基乙酯)(P(tBA-b-DMAEMA))。通过1H-NMR表征了P(tBA-b-DMAEMA)的结构,GPC测试了其分子量及分子量分布。P(tBA-b-DMAEMA)在选择性溶剂中自组装形成核-壳结构的胶束,引用了乙烯基乙二醇二碘醚(BIEE)为交联剂与链段PDMAEMA发生化学交联反应从而得到稳定的壳交联胶束结构,并通过马尔文粒径仪研究了自组装所得胶束的温度及pH敏感性。     

聚丙烯酸-b-聚(N-异丙基丙烯酰胺)嵌段共聚物的合成及其温度和pH值敏感性自组装研究

通过原子转移自由基聚合方法, 在丁酮/异丙醇混合溶剂中合成了分子量可控和分布较窄的聚丙烯酸叔丁酯-b-聚N-异丙基丙烯酰胺(PtBA-b-PNIPAM)嵌段共聚物, 用GPC和 1 H NMR对其结构进行了表征. PtBA-b-PNIPAM在甲苯中水解得到聚丙烯酸-b-聚N-异丙基丙烯酰胺(PAA-b-PNIPAM). 用动态光散射技术对PAA-b-PNIPAM在水溶液中的自组装行为随pH值和温度变化的响应进行了初步研究.     

一种两亲性嵌段共聚物胶束的制备及其对叶酸的负载和控制释放

采用可逆加成-断裂链转移(RAFT)聚合合成了以丙烯酸异丁酯(IBA)、甲基丙烯酸2-二甲氨乙酯(DMAEMA)无规共聚嵌段与聚丙烯酸-2-羟丙酯(PHPA)组成的两亲性两嵌段共聚物(P( IBA-co-DMAEMA)-b-PHPA),并用凝胶渗透色谱(GPC)、核磁共振波谱(1H-NMR)及红外光谱(FTIR)对其进...     

温度、pH双响应嵌段共聚物的合成与表征及其对蚕丝的改性

以2-溴代异丁酸乙酯为引发剂,Cu Br/PMDETA为催化体系,通过原子转移自由基聚合(ATRP)方法,合成了寡聚乙二醇甲基丙烯酸酯与丙烯酸叔丁酯的嵌段共聚物(PMEO2MA-b-Pt BA);通过水解脱去共聚物中丙烯酸叔丁酯嵌段上的叔丁基,使丙烯酸叔丁酯嵌段转化为丙烯酸嵌段,得到寡聚乙二醇甲基丙烯酸酯与丙烯酸的嵌段共聚物(PMEO2MA-b-PAA).通过溶液透光率和动态光散射(DLS)等方法,表征了合成得到的嵌段共聚物的温敏性能和p H响应性,发现嵌段共聚物在24~30℃,p H=4~8的范围内发生亲水性性质转变.以二环己基碳二亚胺(DCC)为缩合剂,在4-二甲氨基吡啶(DMAP)的催化下使PMEO2MA-b-PAA上的羧基与蚕丝上的氨基发生缩合反应,从而令共聚物接枝到蚕丝上,通过接触角和回潮率的测试发现改性后的蚕丝在28~42℃具温敏性,较共聚物的转变温度有所升高,其转变温度随p H的增大而上升.     

含偶氮苯两亲性ABA三嵌段共聚物合成与自组装研究

利用原子转移自由基聚合(ATRP)制备了中间链段含对氰基偶氮苯尾挂液晶基元的PMAA-b-PMAZOCN-b-PMAA两亲性三嵌段共聚物.首先合成了含有偶氮苯液晶基元的甲基丙烯酸酯单体;再使用小分子双端引发剂,以对壬基联二吡啶、溴化亚铜为催化剂,通过ATRP反应制备了含偶氮苯液晶侧基的双端大分子引发剂.进一步以氯化亚铜为催化剂,用该大分子引发剂引发甲基丙烯酸叔丁酯聚合,制备了结构规则的PtBMA-b-PMAZOCN-PtBMA三嵌段共聚物.通过在三氟乙酸作用下的选择性水解,将PtBMA段中的甲基丙烯酸叔丁酯单体单元转化为甲基丙烯酸,得到了两端亲水,中间疏水的两亲性ABA三嵌段共聚物.用1H-NMR、GPC、PLM、DSC等对产物进行了表征.并利用溶剂诱导微相分离的方法,研究了该共聚物在THF/水混合溶剂中的自组装行为.TEM结果显示,在采用的亲疏水链段比例的条件下,得到了囊泡结构.囊泡结构的平均直径在300~500 nm.在固态下经过紫外光照射,囊泡结构转变为实心胶体球.     

Low molar mass poly(styrene-co-acrylic acid) amphiphilic block copolymers: synthesis and characterization

Low molar mass (∼ 4000) di- and triblock copolymers of styrene and tert-butyl acrylate were synthesized by atom transfer radical polymerization (ATRP) in bulk and solution conditions. A CuBr/N, N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) catalyst system in conjunction with an alkyl-halide initiator were used to control the synthesis of the polystyrene macroinitiator and the subsequent copolymerization with tert-butyl acrylate. Hydrolysis of the tert-butyl acrylate blocks to acrylic acid blocks in the presence of trifluoroacetic acid resulted in the formation of an amphiphilic block copolymer. Size exclusion chromatography (SEC) and matrix assisted laser desorption ionization - time of flight - mass spectrometry (MALDI-TOF-MS) were used to determine the molar mass and molar mass distribution of the polystyrene macroinitiators and the block copolymers. ¹H NMR was used to characterize the polystyrene macroinitiators and the block copolymers, and to confirm hydrolysis of the poly(tert-butyl acrylate) blocks to poly(acrylic acid).     

Synthesis,characterization, and property of amphiphilic fluorinated abc‐type triblock copolymers

Novel amphiphilic fluorinated ABC‐type triblock copolymers composed of hydrophilic poly(ethylene oxide) monomethyl ether (MeOPEO), hydrophobic polystyrene (PSt), and hydrophobic/lipophobic poly(perfluorohexylethyl acrylate) (PFHEA) were synthesized by atom transfer radical polymerization (ATRP) using N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA)/CuBr as a catalyst system. The bromide‐terminated diblock copolymers poly(ethylene oxide)‐block‐polystyrene (MeOPEO‐b‐PSt‐Br) were prepared by the ATRP of styrene initiated with the macroinitiator MeOPEO‐Br, which was obtained by the esterification of poly(ethylene oxide) monomethyl ether (MeOPEO) with 2‐bromoisobutyryl bromide. A fluorinated block of poly(perfluorohexylethyl acrylate) (PFHEA) was then introduced into the diblock copolymer by a second ATRP process to synthesize a novel ABC‐type triblock copolymer, poly(ethylene oxide)‐block‐polystyrene‐block‐poly(perfluorohexylethyl acrylate) (MeOPEO‐b‐PSt‐b‐PFHEA). These block copolymers were characterized by means of proton nuclear magnetic resonance (¹H NMR) and gel permeation chromatography (GPC). Water contact angle measurements revealed that the polymeric coating of the triblock copolymer (MeOPEO‐b‐PSt‐b‐PFHEA) shows more hydrophobic than that of the corresponding diblock copolymer (MeOPEO‐b‐PSt). Bovine serum albumin (BSA) was used as a model protein to evaluate the protein adsorption property and the triblock copolymer coating posseses excellent protein‐resistant character prior to the corresponding diblock copolymer and polydimethylsiloxane. These amphiphilic fluoropolymers can expect to have potential applications for antifouling coatings and antifouling membranes. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

AMPHIPHILIC STAR-BLOCK COPOLYMERS BY IODIDE-MEDIATED RADICAL POLYMERIZATION

Amphiphilic star-block copolymers composed of polystyrene and poly(acrylic acid)were synthesized by iodide- mediated radical polymerization.Firstly,free radical polymerization of styrene was carried out with AIBN as initiator and 1,1,1-trimethyolpropane tri(2-iodoisobutyrate)as chain transfer agent,giving iodine atom ended star-shaped polystyrene with three arm chains,R(polystyrene)_3.Secondly,tert-butyl acrylate was polymerization using polystyrene obtained as macro-chain transfer agent,and star-block copolymer,R(polystyrene-b-poly(tert-butyl acrylate))_3 with controlled molecular weight was obtained.Finally,amphiphilic star-block copolymer,R(polystyrene-b-poly(acrylic acid))_3 was obtained by hydrolysis of R(polystyrene-b-poly(tert-butyl acrylate))_3 under acidic condition.     

Novel Amphiphilic Diblock and Triblock Liquid‐Crystalline Copolymers with Well‐Defined Structures Prepared by Atom Transfer Radical Polymerization

Summary: Based on a hydrophilic poly(ethylene oxide) macroinitiator (PEOBr), a novel amphiphilic diblock copolymer PEO‐block‐poly(11‐(4‐cyanobiphenyloxy)undecyl) methacrylate) (PEO‐b‐PMA(11CB)) was prepared by atom transfer radical polymerization (ATRP) using CuCl/1,1,4,7,10,10‐hexamethyltriethylenetriamine as a catalyst system. An azobenzene block of poly(11‐[4‐(4‐butylphenylazo)phenoxyl]undecyl methacrylate) was then introduced into the copolymer sequence by a second ATRP to synthesize the corresponding triblock copolymer PEO‐b‐PMA(11CB)‐b‐PMA(11Az). Both of the amphiphilic block copolymers had well‐defined structures and narrow molecular‐weight distributions, and exhibited a smectic liquid‐crystalline phase over a wide temperature range.

The amphiphilic triblock copolymer synthesized here.     

Block copolymerization of tert‐butyl methacrylate with α,ω‐difunctionalized polystyrene macroiniferter and hydrolysis to amphiphilic block copolymer

The block copolymerization of tert‐butyl methacrylate (tBMA) with a difunctionalized polystyrene (PS) macroinitiator was investigated. The polymerizations were performed under UV light irradiation using PS bearing α‐ and ω‐functionalized end groups containing diethyldithiocarbamyl groups as a macroiniferter. Kinetic studies indicate the molecular weights of triblock copolymers increased linearly with the conversion. Block copolymers with different lengths of PtBMA segments were easily prepared by varying the ratio of tBMA and PS macroiniferter or by controlling the monomer conversion. The formations of block copolymers were characterized by gel permeation chromatographic, ¹H NMR, and DSC analyses. PtBMA segments of the triblock copolymer were subsequently hydrolyzed quantitatively to poly(methacrylic acid) segments using concentrated HCl as a catalyst in a refluxing solution of dioxane, and then an amphiphilic ABA triblock copolymer was produced. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1450–1455, 2001     

Novel synthesis of biodegradable poly(lactide-co-ethylene glycol) block copolymers

Biodegradable and amphiphilic diblock copolymers [polylactide-block-poly(ethylene glycol)] and triblock copolymers [polylactide-block-poly(ethylene glycol)-block-polylactide] were synthesized by the anionic ring-opening polymerization of lactides in the presence of poly(ethylene glycol) methyl ether or poly(ethylene glycol) and potassium hexamethyldisilazide as a catalyst. The polymerization in toluene at room temperature was very fast, yielding copolymers of controlled molecular weights and tailored molecular architectures. The chemical structure of the copolymers was investigated with ¹H and ¹³C NMR. The formation of block copolymers was confirmed by ¹³C NMR and differential scanning calorimetry investigations. The monomodal profile of the molecular weight distribution by gel permeation chromatography provided further evidence of block copolymer formation as well as the absence of cyclic species. Additional confirmation of the block copolymers was obtained by the substitution of 2-butanol for poly(ethylene glycol); butyl groups were clearly identified by ¹H NMR as polymer chain end groups. The effects of the copolymer composition and lactide stereochemistry on the copolymer properties were examined. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2235–2245, 2007     

Preparation of platinum nanoparticles using star-block copolymer with a carboxylic core

Well-defined star polymers containing a functionalized core supply a molecular nanocavity and may be used to control formation of inorganic nanoparticles. Herein, platinum (Pt) nanoparticles of 2-4 nm were prepared by using (poly(acrylic acid)-b-polystyrene)6 (PAA-b-PS)6 amphiphilic star block copolymer as a novel single molecular stabilizer. This PAA core functionalized star polymer was obtained by hydrolysis of (poly(tert-butyl acrylate)-b-polystyrene)6 (PtBA-b-PS)6, which was synthesized by sequential atom transfer radical polymerization (ATRP) of tert-butyl acrylate and styrene with an initiator bearing six 2-bromoisobutyloxyl groups. Pt(IV) ions were loaded by ion exchange to the core of the star polymer and Pt nanoparticle stabilized by single star polymer was produced by a reduction with NaBH4.