Generation of CdS clusters using laser ablation: the role of wavelength and fluence

The formation of cationic clusters in the laser ablation of CdS targets has been investigated as a function of wavelength and fluence by mass spectrometric analysis of the plume. Ablation was carried out at the laser wavelengths of 1064, 532, 355, and 266 nm in order to scan the interaction regimes below and above the energy band gap of the material. In all cases, the mass spectra showed stoichiometric Cd _n S _n ⁺ and nonstoichiometric Cd _n S _n−1⁺, Cd _n S _n+1⁺, and Cd _n S _n+2⁺ clusters up to 4900 amu. Cluster size distributions were well represented by a log-normal function, although larger relative abundance for clusters with n=13, 16, 19, 34 was observed (magic numbers). The laser threshold fluence for cluster observation was strongly dependent on wavelength, ranging from around 16 mJ/cm² at 266 nm to more than 300 mJ/cm² at 532 and 1064 nm. According to the behavior of the detected species as a function of fluence, two distinct families were identified: the “light” family containing S₂⁺ and Cd⁺ and the “heavy” clusterized family grouping Cd₂⁺ and Cd _n S _m ⁺. In terms of fluence, it has been determined that the best ratio for clusterization is achieved close to the threshold of appearance of clusters at all wavelengths. At 1064, 532, and 355 nm, the production of “heavy” cations as a function of fluence showed a maximum, indicating the participation of competitive effects, whereas saturation is observed at 266 nm. In terms of relative production, the contribution of the “heavy” family to the total cation signal was significantly lower for 266 nm than for the longer wavelengths. Irradiation at 355 nm in the fluence region of 200 mJ/cm² has been identified as the optimum for the generation of large clusters in CdS.     

355 nm激光光电离甲醛飞行时间质谱的研究

利用脉宽为5 ns脉冲Nd: YAG 355 nm激光在功率密度为10¹¹–10¹² W/cm²条件下实现了甲醛含水团簇多光子电离, 并用飞行时间质谱对其电离产物和电离过程进行了研究. 实验中观测到了甲醛的质子化团簇系列 (CH₂O)_nH⁺(n=1–4), 甲醛的去质子化团簇系列(CH₂O)_nCHO⁺ (n=1–3), 以及两个起源于H₂CO去质子和质子化的含水团簇系列HCO⁺(H₂O)_n(n=1,3,5)和H₃CO⁺(H₂O)_n(n=1,3,5), 并对其中的一些团簇结构构型进行了猜测. 研究在不同的激光功率密度下甲醛团簇质谱峰的变换情况, 当激光密度达到9.3× 10¹¹ W/cm², 开始出现CH₂O和H₂O本体及其光致碎片的信号, 但对应的各质量峰没有明显地分辨开, 而是以包络的形式出现, 这是激光电离产生高能离子释放的一种表现, 提出认等离子体动力学鞘层加速机制(模型)来解释高能离子形成的物理机制. 关键词： 甲醛 团簇 飞行时间质谱 激光电离     

Microstructuring of fused silica by laser-induced backside wet etching using picosecond laser pulses

The laser-induced backside wet etching (LIBWE) is an advanced laser processing method used for structuring transparent materials. LIBWE with nanosecond laser pulses has been successfully demonstrated for various materials, e.g. oxides (fused silica, sapphire) or fluorides (CaF₂, MgF₂), and applied for the fabrication of microstructures. In the present study, LIBWE of fused silica with mode-locked picosecond (t_p = 10 ps) lasers at UV wavelengths (λ₁ = 355 nm and λ₂ = 266 nm) using a (pyrene) toluene solution was demonstrated for the first time. The influence of the experimental parameters, such as laser fluence, pulse number, and absorbing liquid, on the etch rate and the resulting surface morphology were investigated. The etch rate grew linearly with the laser fluence in the low and in the high fluence range with different slopes. Incubation at low pulse numbers as well as a nearly constant etch rate after a specific pulse number for example were observed. Additionally, the etch rate depended on the absorbing liquid used; whereas the higher absorption of the admixture of pyrene in the used toluene enhances the etch rate and decreases the threshold fluence. With a λ₁ = 266 nm laser set-up, an exceptionally smooth surface in the etch pits was achieved. For both wavelengths (λ₁ = 266 nm and λ₂ = 355 nm), LIPSS (laser-induced periodic surface structures) formation was observed, especially at laser fluences near the thresholds of 170 and 120 mJ/cm², respectively.     

Microhydration of the methylene blue cation in an electrospray ion source

Microhydrated methylene blue cations, MB⁺(H₂O) _n , are produced in an electrospray ion source and their size-distributions are measured as a function of the source temperature. A series of MB⁺(H₂O) _n ions is observed up to n ≃ 60. A striking feature observed in the mass spectra is that the series of hydrated ions starts at n = 4; intensities of n = 1–3 are extremely suppressed. The absence of n = 1–3 ions is well explained by the energetics concerning evaporation processes of water molecules, based on stable structures and the binding energies of MB⁺(H₂O) _n ions calculated by DFT calculations up to n = 5. MB⁺(H₂O) _n ions for n > 4 evaporate a single water molecule sequentially, while MB⁺(H₂O)₄ tends to fragment into MB⁺ and (H₂O)₄ rather than MB⁺(H₂O)₃ and an H₂O molecule. We have observed a clear magic peak at n = 24, which strongly suggests that the MB⁺(H₂O)₂₄ ion is formed by attaching a neutral (H₂O)₂₀ cage onto an MB⁺(H₂O)₄ ion.     

Femtosecond electron dynamics on solid surfaces probed by low energy ion scattering and stimulated desorption of secondary ions

The cations emission from condensed matter surfaces has been investigated on the basis of localization and delocalization of valence hole(s) in the femtosecond timescale. The yield of scattered H⁺ (E₀=100 eV), though negligibly small from the Pt(1 1 1) substrate, increases markedly when Ar is adsorbed on it, indicating the localization of a valence (H⁺ 1s) hole on the physisorbed Ar layer. However, the yield of H⁺ scattered from a thick H₂O layer is considerably small relative to that from Ar and CO layers. The delocalized nature of a valence hole in water ice is caused by some covalency in hydrogen bonds. Hydrated protons, H⁺(H₂O)_n, n=1,2,…,10, are emitted efficiently in electron stimulated desorption from water molecules adsorbed on the Ar layer; the ion yields are highest at the initial adsorption stage and decay steeply with increasing coverage. Coulombic repulsion between the hydrated protons confined in physisorbed nanoclusters is responsible for the explosive ion emission.     

Hydrogenated carbon clusters produced by highly charged ion impact on solid

The emission of small (hydrogenated) carbon cluster ions C_nHm ⁺ (n =2-22) upon highly charged Xe^q+ (q =20-44) impact on C₈₄ surfaces is studied by means of time-of-flight secondary ion mass spectrometry. The respective stage of hydrogenation/protonation of a certain carbon cluster ion Cn ⁺ is a strong indication for its geometrical structure. From the cluster ion yield as a function of cluster size it can be concluded, that the hydrogenation takes place after the initial carbon cluster formation. The carbon clusters seem to be emitted as an entity in agreement with “equilibrium” and “shock wave” models. Received 4 February 2000     

Luminescence and crystal field analysis of Eu in Eu[Co(CN)6]·4H2O

The vibrational spectra of Eu[Co(CN)₆]·4H₂O and luminescence spectra of Eu³⁺ in this compound, using 355 nm excitation at temperatures down to 10 K, have been assigned. A clear distinction is made between the n=5 and 4 members of the Ln[M(CN)₆]·nH₂O series from the vibrational spectra. The electronic spectra show prominent vibronic structures, particularly for the ⁵D₀→⁷F₂ sideband. A resonance occurs between the transitions ⁵D₀→⁷F₁(III) and ⁵D₀→⁷F₀+ν(Eu−N). A crystal field analysis of the derived energy data set is presented for Eu³⁺ in eight coordination geometry.     

Rigid lattice NMR spectra of proton conductors H(H2O)nSbO3

The “rigid lattice” ¹H NMR spectra of H(H₂O)_nSbO₃ have been interpreted for n=0.20, 0.92 and 1. For n?0.92 the compounds contain deformed H₃O⁺ ions and OH groups. For n=1 the real formula is (H₃O)_0.7H_0.3SbO₃,0.3 H₂O. The results are discussed in relation to the level of proton conductivity.     

Formation of two ripple modes on Si by ion erosion with simultaneous Fe incorporation

This report focuses on the self organized nanostructure formation on Si (0 0 1) by erosion with low energy Kr⁺ ions with simultaneous incorporation of metallic atoms, in particular Fe. The incorporation of Fe is thought to play an important role in the formation of some features. In the experimental set-up used here the Fe atoms come from the sputtering of a cylindrical stainless steel target situated between the source and the sample holder. It is demonstrated how the Fe flux can be regulated by operational parameters of the ion source. It is shown that two different ripple modes, one perpendicular to the ion beam projection on the surface and the other parallel, were formed at near normal incidence (α = 20°) with ion energy between 300 eV and 2000 eV and a fluence of 6.7 × 10¹⁸ cm⁻². The perpendicular mode ripples dominated the topography when E_ion = 2000 eV, while the parallel mode ripples were the main features observed when E_ion = 300 eV. The correlation of Fe concentration with ion sources parameters and resulting topography is analyzed. It is demonstrated that a certain Fe concentration is necessary for the formation of ripples that are oriented perpendicular to the ion beam and that the Fe concentration alone does not determine the evolving topography.     

Nanochemistry – Chemical Reactions of Iron and Benzene Within Molecular Clusters

Molecular clusters represent a nanoscale test tube where chemical reactions can be examined in a unique way for the effects of the local environment and the possibility of size-dependent reactions. Previous experiments have shown that the ionization/dissociation of iron pentacarbonyl clusters can lead to the formation of iron ions and iron cluster ions and that these species can further react with dopant molecules to yield chemically rearranged products. The present experiments characterize similar reactions with benzene molecules and clusters. Heteroclusters of the form [Fe(CO)₅]_m(C₆H₆)_nAr_p are created in an expanding supersonic jet of the component molecules. Following ionization by a 30 ps, 266 nm laser pulse, extensive dissociation, aggregation, and chemical rearrangement occurs leading to ionic products which are characterized by mass spectrometry. Cluster ions of the type Fe_m(C₆H₆)_n ⁺ are observed as products. The stability of the sandwich form of the ion, Fe(benzene)₂ ⁺, is inferred from the data. Evidence for a similar special stability for the double-decker, Fe₂(benzene)₃ ⁺, is presented.     

Hydration-induced conformational changes in protonated 2,4-pentanedione in the gas phase

Starting with H⁺[CH₃C(O)CH₂C(O)CH₃] (denoted H⁺PD), the protonated diketone-water clusters H⁺PD(H₂O) _n (n = 1–3) have been characterized by density functional theory calculations in combination with vibrational predissociation spectroscopy to explore the conformational changes of a protonated bifunctional ion solvated by water in the gas phase. Theoretical calculations for H⁺PD revealed that the ion contains an intramolecular hydrogen bond (IHB), with two oxygen atoms bridged by the extra proton in an O—H⁺ … O form. Attachment of one water molecule to it readily ruptures this IHB, replacing the H⁺ by the H₃O⁺ moiety. Further replacement of the IHB by two water molecules occurs at n = 2 and the ?C(O)CH₂C(O)- chain is fully opened (or unfolded) after transfer of the extra proton to the water trimer at n = 3. To verify the computational findings, infrared spectroscopic measurements were performed using a vibrational predissociation ion trap spectrometer to identify cluster isomers from the signatures of hydrogen bonded and non-hydrogen bonded OH stretching spectra of H⁺PD(H₂O)_2,3 produced in a corona discharge supersonic expansion. Besides open form isomers, evidence for the formation of water-bridged structures has been found for H⁺PD(H₂O)₃ at an estimated temperature of 200 K. A detailed illustration of the unfolding steps as well as the energy profiles for the evolution of a two-water bridge isomer from the protonated H⁺PD monomer are analysed pictorially (including both stable intermediates and transition states) in the present investigation.     

Ion beam induced luminescence studies of LiAlO2 using negative ions

Lithium aluminate (LiAlO₂) is the candidate material for solid tritium breeder applied in the developing fusion reactors. The research of its defect behavior under ion irradiation was proceeded in the negative ions induced luminescence setup of the GIC4117 Tandem accelerator in Beijing Normal University. The ion beam induced luminescence (IBIL) measurement was performed by 20 keV H⁻ ions at room temperature. The luminescence spectra showed seven emission bands: the 4.55 eV may due to a self-trapped exciton (STE), the 4.06 eV and the 1.72 eV may due to impurity or intrinsic defect, the 3.54 eV due to F center, the 3.20 eV due to F⁺ center, the 2.93 eV due to F₂ center, the 2.30 eV due to F-center aggregates (F_n center), respectively. The intensity evolutions of each band with fluence were presented and the corresponding mechanisms were discussed.     

Conductivity of β″ and ion rich β alumina.I.H.+(H2O)n compounds

The conductivity and thermal stability of H⁺(H₂O)_n β″ and ion rich β alumina single crystals have been measured by the complex impedance method in the 25–700°C temperature range. Two mechanisms of conductivity were assumed: proton transfer at lower temperatures and H₃O⁺ diffusion in the high-temperature range. Both structures have similar properties, but ion rich β alumina possesses the best stability and the lowest activation energy (β: 0.15 eV, β″: 0.20 eV below 400 and 300°C respectively). The room-temperature conductivity is ≈5×10^?6 Ω^?1 cm^?1. The conducting properties and mechanisms are discussed and compared to other protonic or ionic conductors.     

Electronic photodissociation spectra of the Arn-C4H2 (n=1-4) weakly bound cationic complexes

Electronic spectra of a series of weakly bound clusters consisting of argon (Ar_n, n=1-4) bound to the butadiyne cation, C₄H₂⁺, have been recorded in the visible range from 440 to 520 nm by photodissociation. The C₄H₂⁺ fragment signal was recorded as a function of the laser wavelength during excitation of the A←X electronic transition. The observed transitions were assigned to the band origin of the cationic complexes and to vibronic bands involving excitation of the ν₃ and ν₇ vibrational modes of the C₄H₂⁺ moiety, as well as combination bands of these modes. Comparison of the photodissociation spectra of the various clusters reveals a small blue shift, 25 cm⁻¹ of the band maxima relative to the corresponding transitions reported from gas phase spectra of the bare C₄H₂⁺ cation. The magnitude of the blue shift of each band increases with successive Ar solvation up to n=3. Furthermore, each band becomes increasingly broadened towards the red with the addition of Ar atoms due to an increasing number of unresolved transitions involving excited intermolecular modes.     

Competitive solvation of K+ by C6H6 and H2O in the K+-(C6H6)n-(H2O)m (n = 1–4; m = 1–6) aggregates

The competitive solvation of the potassium ion by benzene and water is investigated at molecular level by means of Molecular Dynamics simulations on the K⁺-(C₆H₆) _n -(H₂O) _m (n = 1–4; m = 1–6) ionic aggregates. The preference of K⁺ to bind C₆H₆ or H₂O is investigated in the range of temperatures in which isomerisation processes are likely by adding water and benzene to the K⁺-(C₆H₆) _n and K⁺-(H₂O) _m aggregates, respectively. Hydrogen bonds and the π-hydrogen bond, in spite of their weakness with respect to the K⁺-π and K⁺-H₂O interactions, play an important role in stabilising different isomers, thus favouring isomerisation processes. Accordingly with experimental information it has been found that K⁺ bind preferably C₆H₆ rather than H₂O and that the fragmentation of C₆H₆ is only observed for aggregates containing four molecules of benzene.     

Formation of bubbles and blisters in hydrogen ion implanted polycrystalline tungsten

ABSTRACT

Tungsten (W) has been regarded as one of the most promising plasma facing materials (PFMs) in fusion reactors. The formation of bubbles and blisters during hydrogen (H) irradiation will affect the properties of W. The dependence of implantation conditions, such as fluence and energy, is therefore of great interest. In this work, polycrystalline tungsten samples were separated into two groups for study. The thick samples were implanted by 18?keV H₃⁺ ions to fluences of 1?×?10¹⁸, 1?×?10¹⁹ and 1?×?10²⁰ H⁺/cm², respectively. Another thick sample was also implanted by 80?keV H₂⁺ ions to a fluence of 2?×?10¹⁷ H⁺/cm² for comparison. Moreover, the thin samples were implanted by 18?keV H₃⁺ ions to fluences of 9.38?×?10¹⁶, 1.88?×?10¹⁷ and 5.63?×?10¹⁷ H⁺/cm², respectively. Focused ion beam (FIB) combined with scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used for micro-structure analysis, while time-of-flight ion mass spectrometry (ToF-SIMS) was used to characterize the H depth profile. It is indicated that bubbles and blisters could form successively with increasing H⁺ fluence. H bubbles are formed at a fluence of ～5.63?×?10¹⁷ H⁺/cm², and H blisters are formed at ～1?×?10¹⁹ H⁺/cm² for 18?keV H₃⁺ implantation. On the other hand, 80?keV H₂⁺ ions can create more trapping sites in a shallow projected range, and thus enhancing the blisters formation with a relatively lower fluence of 2?×?10^17?H⁺/cm². The crack-like microstructures beneath the blisters are also observed and prefer to form on the deep side of the implanted range.     

Potassium ion transport in potassium ferrocyanide tri-hydrate

K₄Fe(CN)₆ ? 3H₂O is found to be a K⁺ ion conductor. It is suggested that K⁺ mobility originates from formation of hydrogen bonded aggregates of H₂O molecules in the vicinity of K⁺ ions.     

Investigations on field desorption products from silver surfaces by mass spectrometry

Field evaporation of silver and field desorption of silver surface compounds were investigated by analysing positive ions with a mass spectrometer. In particular, the well known adsorption states of oxygen, and further the interactions of H₂O, NH₃, H₂, CO and CH₄ were measured in the field ion mass spectrometer under steady state fields of > 0.1 V/Å with a sensitivity of < 0.1 ions s^?1 and at temperatures between 80 °K and 425 °K. Although oxygen is usually chemisorbed at Ag surfaces, no AgO⁺, AgO⁺₂ or other Ag-O compounds could be detected as positive ions, Ag⁺ and O₂⁺ are the only observed ions at best image fields in oxygen up to fields of field evaporation of Ag⁺(≈ 2.2 V/Å). Even after the actual adsorption of oxygen with zero-field (6 × 10⁵ Langmuir at 10^?3 Torr) at 323 °K and 473 °K and subsequent application of the desorption field at 210°K no silver-oxygen compounds were found in positive ionic form. Small quantities of AgO⁺ and AgO⁺₂ were only formed — besides Ag(H₂O)_x⁺ complexes — if atomic oxygen was supplied by the field induced dissociation of water.Gases which do not adsorb on silver under zero-field conditions (H₂, CO, CH₄, N₂) yield the ions Ag(H₂)_n, Ag(CO)_n⁺, n=1, 2; AgCH₄⁺, AgN₂⁺. The situation with H₂O and NH₃ is more complicated: Molecular ions [Ag(H₂O)_n]⁺·mH₂O, n=1,…, 4, m=1,…, 8 and [Ag(NH₃)_n]⁺·mNH₃, n=1, 2, m=1,…, 6 are found besides Ag⁺.From the temperature and field dependence conclusions are drawn about the mechanisms of evaporation and formation of ionic surface complexes. The activation energies of evaporation of Ag⁺ are found to depend on the square root of the field strength. In general, the generation of surface compounds can be described by field induced reactions rather than usual gas adsorption.     

Photon stimulated ion desorption of H+ ions from GaAs (110)/H2O

The photon stimulated ion desorption yield of H⁺ ions from a H₂O dosed GaAs (110) surface has been measured in the range 18eV ? hυ ? 30eV. There is a direct correspondence between the PSID H⁺ yield, reflectance, and the secondary electron yield spectrum of GaAs (110). The data provides evidence that the initial stages of PSID involve core level (Ga(3d), O(2s)) → conduction band excitation followed by Auger decay.     

Coordination and solvation of noble metal ions: Infrared spectroscopy of Ag+(H2O)n

Vibrational spectra of mass-selected Ag⁺(H₂O)_n ions are measured by infrared photodissociation spectroscopy and analyzed with the aid of density functional theory calculations. Hydrogen bonding between H₂O molecules is found to be absent for cold Ag⁺(H₂O)₃, but detected for Ag⁺(H₂O)₄ through characteristic changes in the position and intensity of OH-stretching transitions. The third H₂O coordinates directly to Ag⁺, but the fourth H₂O prefers solvation through hydrogen bonding. The preference of the tri-coordinated form is attributed to the inefficient 5s–4d hybridization in Ag⁺, in contrast to the efficient 4s–3d hybridization in Cu⁺. For Ag⁺(H₂O)₄, however, di-coordinated isomers are identified in addition to the tri-coordinated one.