Radiation-induced polymerization of acrylic acid in aqueous solution

Aqueous acrylic acid in the presence of cupric chloride has been subjected to γ-irradiation under various reaction conditions and the molecular weights of the resultant poly(acrylic acid) measured. The results, taken in conjunction with previous findings on the dependence of the rate of polymerization on intensity, monomer concentration, and cupric chloride concentration, indicate chain termination solely by cupric ion (rate constant k_tCu) and chain transfer to polymer (rate constant kf). Values have been obtained for k_tCu/k_p, k_f/k_p and G(radical) of acrylic acid. On the basis of these data a theoretical chain-length distribution has been derived which agrees well with distribution measured by gel-permeation chromatography.     

Benzophenone-initiated grafting photopolymerization of acrylic acid on the surface of polyethylene from the monomer aqueous solution without its deaeration

The photoinduced grafting polymerization of a functional monomer (acrylic acid) is performed on the surface of a polymeric material (polyethylene film) from a nondeaerated aqueous solution of the monomer with the use of a water-insoluble photoinitiator (benzophenone). According to the developed method, the photoinitiator is first deposited on the surface of the polyethylene film from solution in a volatile solvent; then, the surface of the film is covered with a layer of the nondeaerated aqueous solution of the monomer, over which a quartz plate or the second polyethylene film is placed, and the resulting sandwich is exposed to UV radiation. This method is highly efficient when the thickness of the monomer-solution layer is less than 100 ??m. Owing to the small thickness of the monomer solution layer and the absence of the inflow of atmospheric oxygen, molecular oxygen that is initially contained in the monomer solution is rapidly consumed in photooxidation reactions occurring on the surface of the substrate polymer; therefore, molecular oxygen insignificantly affects the efficiency of grafting polymerization.     

Immobilization of porphyrins on the surface of polypropylene films modified with acrylic acid

Russian Journal of General Chemistry - The process of immobilization of the aminoporphyrins: 5-(p-aminophenyl)-10,15,20-triphenylporphyrin (I), 5,10,15,20-tetra(p-aminophenyl)porphyrin (II),...     

Grafting polymerization of acrylic acid onto preirradiated polypropylene fabric

Acrylic acid (AAc) was grafted onto polypropylene (PP) fabric by a preirradiation method using a Co-60 gamma ray. The effect of absorbed dose, AAc concentration, reaction temperature, reaction time, storage time, as well as the effect of ferrous ion and sulfuric acid on the degree of grafting were determined. It has been shown that the synergistic effect of sulfuric acid with the ferrous sulfate can not only increase the grafting yield, but also decrease the apparent activation energy for the grafting. It leads to the possibility of getting a particular grafting yield at a lower absorbed dose. In this experiment, It has also been shown that the grafting activity of preirradiated PP fabric in AAc aqueous solution could be well kept at room temperature for a long period.     

Characterization of N-isopropyl acrylamide/acrylic acid grafted polypropylene nonwoven fabric developed by radiation-induced graft polymerization

Radiation-induced graft copolymerization of N-isopropylacrylamide (NIPAAm) and acrylic acid (AA) mixture was carried out on polypropylene nonwoven fabric to develop a thermosensitive material and has been found to affect the thermal and physical characteristics of fabric. The grafted fabrics with different monomer ratios were characterized by thermal gravimetric analysis (TGA), fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD), contact angle and atomic force microscopy (AFM). Results of FTIR clearly indicated that poly(acrylic acid) and poly(N-isopropyl acrylamide) were successfully grafted onto the membrane surface. TGA results showed that the thermal stability of PP fabric increased after grafting of NIPAAm/AA. The crystallinity values from DSC and XRD were found to decrease with increase in degree of grafting because of the addition of grafted chains within the noncrystalline region. The decrease in contact angles of the grafted fabric with an increase of the degree of grafting shows that PNIPAAm/PAA exists as the hydrophilic component. The increase in surface roughness after grafting was observed by AFM.     

The surface tension of poly(acrylic acid) in aqueous solution

Summary Surface tension has been measured of polyacrylic acidwater solutions with pH 3–11. Until approximately pH 4.6 corresponding to 10% neutralization, PAA-solutions are surface active and inactive at higher pH, time dependence of equlibrium surface tension is analysed. Non-ionized neutral chain segments are surface active, their diffusion to surface is rate determining.

---

Zusammenfassung Es wurde die Oberflächenspannung von wäßrigen Polyacrylsäure-Lösungen der pH-Werte von 3–11 gemessen. Bis zu einem pH-Wert von etwa 4.6, d. h. 10% Neutralisation, sind die Lösungen oberflächenaktiv, bei höheren pH-Werten inaktiv. Es wird die Zeitabhängigkeit der Einstellung der Gleichgewichtsoberflächenspannung analysiert. Nicht ionisierte, neutrale Kettensegmente sind oberflächenaktiv. Diffusion zur Oberfläche ist der zeitbestimmende Faktor.

     

Gas transport in surface grafted polypropylene films with poly(acrylic acid) chains

This work describes the grafting reaction of poly(acrylic acid) (PA) onto the surface of polypropylene (PP) films carried out with ultraviolet radiation, using benzophenone as photoinitiator and water as solvent. By increasing the reaction time, graft percentages of 3.5, 6.5, 12.9, 19.8, 29.4, and 36.0% were obtained. Micrographs of the modified films show that grafting exclusively occurs on the PP films surface. The values of the permeability coefficient of oxygen, nitrogen, carbon dioxide, carbon monoxide, argon, methane, ethane, ethylene, and propane across the grafted films undergo a sharp drop. The interpretation of the permeation results suggest that radicals created in the tertiary carbons of the grafted chains by effect of UV light or by chain transfer reactions may highly crosslink the PA grafted layer. A rigid layer involving both strong hydrogen bonding and chains crosslinking is formed at grafting percentages of 3.5% that strongly hinders gas permeation across that layer. Destruction of hydrogen bonding by partially replacing protons of acrylic acid residues by sodium/silver cations increases the permeability of the surface grafted films. Finally, the films permselectivity is hardly affected by the grafted layer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2421–2431, 2007     

Controlling monomer sequence distribution in RAFT polymerization of styrene and acrylic acid

Continuous and semicontinuous RAFT copolymerization was first applied to synthesize well-defined copolymers of styrene and acrylic acid. The obtained copolymers have a different monomer sequence distribution due to different ways of adding acrylic acid to the reaction medium.     

Chemical graft polymerization of sulfobetaine monomer on polyurethane surface for reduction in platelet adhesion

Surface modification is an effective way to improve the hemocompatibility and remain bulk properties of biomaterials. Recently, polymer tailored with zwitterions was found having good blood compatibility. In this study, the zwitterionic monomer of sulfobetaine was graft polymerized onto polyurethane (PU) surface in a three-step heterogenous system through the vinyl bonds of acrylic acid (AA) or hydroxyethyl methacrylate (HEMA), which was immobilized with hexamethylene diisocyanate (HDI) beforehand. First, PU was activated with isocyanate groups using HDI as coupling agent. Second, AA or HEMA was introduced through reaction of AA or HEMA with NCO groups bonded on PU surface. Last, zwitterionic monomer of sulfobetain was graft polymerized with vinyl group of AA or HEMA using AIBN as polymerization initiator. The reaction process was monitored with ATR-IR spectra and XPS spectra. Variation of graft yield with temperature and monomer feed concentration was investigated and feasible conditions were optimized. The wettability of films was investigated by water contact angle measurement and water absorbance. Platelet adhesion experiment was conducted as a preliminary test to confirm the improved blood compatibility of PU. The number of platelets adhering to PU decreased greatly comparing with the originals after 1 and 3 h of contact with human plate-rich plasma (PRP).     

Photoinduced reorientation processes in thin films of photochromic LC polymers on substrates with a photocontrollable command surface

Orientation and reorientation processes that occur in nematic and cholesteric LC polymer systems under irradiation with plane-polarized light are studied. A copolyacrylate containing phenyl benzoate and azobenzene side groups is synthesized as a nematic polymer; the cholesteric mixture is prepared via doping of the nematic copolymer with the chiral dopant, the derivative of D-isosorbide. Thin layers of the azobenzene-containing photoorientant SD-1 are first used as orienting substrates for polymer liquid crystals. Thin layers of the copolymer and of the mixture are spin-coated on the substrate after irradiation of the photoorientant layer with polarized light. It is shown that after annealing phenyl benzoate and azobenzene side groups of the nematic copolymer orient strictly along the direction of orientation of surface molecules, whereas in the case of the cholesteric mixture, a partial formation of the helical structure is observed. It is demonstrated that all the systems under examination can experience the repeated cyclic reorientation of the cooperative type under irradiation and subsequent annealing of the films.     

Kinetics of adsorption of hydrocarbon chloro-derivatives from seven-component aqueous solution onto a thin layer of DTO-activated carbon

The mass transfer and effective intraparticle diffusion coefficients were determined in the adsorption process of 1,2-dichloroethane, 1,1,2,2-tetrachloroethane, chloroform, carbon tetrachloride, 1,1-dichloroethene, perchloroethene, and 1,1,2-trichloroethene from seven-component aqueous solution onto a thin layer of activated carbon. A modified constant-volume method was used in the studies. A correlation between similarity numbers in the form of Sh=2+1.54Re(0.66)Sc(0.33) was derived for a range of the Reynolds numbers in(1-15). Based on the Biot number, it was found that within the range of Reynolds numbers <14 the mass transport through a film decides the adsorption rate.     

Functionalization of polyethylene surface using plasma-induced graft copolymerization of acrylic acid

Plasma-induced graft copolymerization of acrylic acid onto PE films was investigated. The influence of plasma treatment power, pressure, time, graft copolymerization time, and monomer concentration on polymerization yield was determined. A chemical shift of the Cls signal of Ar plasma treated and untreated PE films was revealed by ESCA, which also verified the presence of grafted PAAc. An increase in graft polymerization yield with plasma treatment time and power was found. Both the plasma treated film and the subsequently grafted film were shown to be hydrophilic. Only the grafted film, however, shows an invariably low contact angle. The decomposition of peroxides upon heating was followed by a simple first-order reaction. © 1993 John Wiley & Sons, Inc.     

Photoinduced relaxation of surface charge in a dye-polyvinylcarbazole layer

Single-layer and dual-layer xerographic photoreceptors based on polyvinylcarbazole, a novolac resin, and the pyrocatechol violet dye were studied. The single-layer photoreceptors exhibited an order of magnitude higher photosensitivity as compared with their dual-layer counterparts. It was found that the character of conductivity decay in a photoreceptor after positive or negative corona charging of its outer surface depended on the technological conditions of substrate pretreatment.     

Photoinduced graft polymerization of 2-methacryloyloxyethyl phosphorylcholine on polyethylene membrane surface for obtaining blood cell adhesion resistance

Phospholipid polymer, poly[2-methacryloyloxyethyl phosphorylcholine (MPC)], was grafted with polyethylene (PE) membrane using photoinduced polymerization technique to make the membrane resistant to cell adhesion. The water contact angle on the PE membrane grafted with poly(MPC) decreased with an increase in the photopolymerization time. This decrease corresponded to the increase in the amount of poly(MPC) grafted on the PE surface. The same graft polymerization procedure was applied using other hydrophilic monomers, such as acrylamide (AAm), N-vinylpyrrolidone (VPy) and methacryloyl poly(ethylene glycol) (MPEG). These monomers were also polymerized to form grafted chains on the PE membrane, and the grafting was confirmed with X-ray photoelectron spectroscopy. Analysis of amount and distribution of plasma proteins at the plasma-contacting surface of the original and the modified PE membranes were analyzed using immunogold assay. The grafting of poly(MPC) and poly(VPy) on PE membrane reduced the plasma protein adsorption significantly compared with that on the original PE membrane. However, the PE membranes grafted with poly(AAm) or poly(MPEG) did not show any effects on protein adsorption. Platelet adhesion on the original and modified PE membranes from platelet-rich plasma was also examined. A large number of platelets adhered and activated on the original PE membrane. Grafting with poly(AAm) did not suppress platelet adhesion, but grafting with poly(MPC) or poly(VPy) on the PE membrane was effective in preventing platelet adhesion. It is concluded that the introduction of the phosphorylcholine group on the surface could decrease the cell adhesion to substrate polymer.     

Fabrication of high performance thin films from metal fluorocomplex aqueous solution by the liquid phase deposition

The hetro-structured oxide thin films from metal fluorocomplex solution have been prepared by the liquid phase deposition (LPD) method. The Pt/Nb₂O₅ and Au/Nb₂O₅ composite films can be prepared from a mixed solution of niobium source, H₃BO₃, Pt(NH₃)₄Cl₂ and HAuCl₄ aqueous solutions under the ambient temperature and atmosphere. In the case of Au/SiO₂ composite film, (NH₄)₂SiF₆ solution is used as a mother solution. The Pt and Au ionic species are deposited in Nb₂O₅ and SiO₂ matrices. They are reduced to their metallic state after treatment above 200 °C. The size of dispersed particles can be controlled by heat treatment temperature. It is also clear that, gold nanoparticles are also found to interact with SiO₂, although the interaction is smaller than that with Nb₂O₅ showing the size of Au nanoparticles remain smaller in Nb₂O₅ that in SiO₂.     

Preparation and polymerization of a diisocyanate from the Diels-Alder adduct of levopimaric acid and acrylic acid

Starting from tetrahydroabietic acid the model compounds tetrahydroabietoyl chloride, 2-aminoethyltetrahydroabietate hydrochloride, and 2-isocyanatoethyltetrahydroabietate have been prepared. Carbamate and urea derivatives of the isocyanate have been prepared. A Diels-Alder adduct of levopimaric acid and acrylic acid has been prepared and converted to its diacid chloride. The β-aminoethyl ester hydrochloride has been synthesized and converted to a diisocyanate which has been polymerized with poly(tetramethylene glycol) and also with p-phenylenediamine. Dimerex resin, a technical polymerized rosin, has been similarly converted to a diisocyanate. This isocyanate has not proven to be useful as a polymer-forming intermediate.     

Pulse radiolysis of poly(acrylic acid) in deoxygenated aqueous solution

Absorption spectra of macroradicals formed by irradiation of poly (acrylic acid) in aqueous solution are presented and the role of intermediates of water radiolysis in their formation is discussed. Both the rate constant of ·OH reaction with the polymer and the process of macroradicals decay are shown to be strongly dependent on pH. The macroradicals formed in dissociated polymer molecules have a lifetime of several minutes.     

Coating lysozyme molecularly imprinted thin films on the surface of microspheres in aqueous solutions

The polymerization of 3‐aminophenylboronic acid in an aqueous environment was used for the first time to modify polystyrene microspheres for protein (lysozyme) molecular imprinting. Polystyrene microspheres were prepared by styrene polymerization in an aqueous emulsion with poly(vinyl alcohol) as a surfactant. Poly(3‐aminophenylboronic acid) was then grafted onto the surface of the polystyrene microspheres through oxidation by ammonium persulfate in an aqueous solution in the presence or absence of lysozyme or hemoglobin. Rebinding experiments were conducted to establish the equilibrium time and to detect the specific binding capacity and selective recognition. The results indicated that the microspheres, imprinted by the template protein lysozyme or hemoglobin, possessed specific recognition sites on the shells and had a high specific binding capacity for template proteins. The imprinted particles did not need to be ground or sieved and could easily reach the adsorption equilibrium, thus avoiding some problems of the bulk polymer. All these results demonstrate that the particles have potential applications as substitutes for bulk polymers in biological macromolecular affinity studies. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1911–1919, 2007