Synthesis of polyphenylene ether and thioether ketones

The known polymerization of 4,4′-difluorobenzophenone (DFB) with the dianion of hydroquinone to poly(phenylene ether ether ketone) (PEEK) and polymerization of either DFB with the dianion of 4,4′-dihydroxybenzophenone or self polycondensation of the anion of 4-hydroxy-4′-fluoro-benzophenone to poly(phenylene ether ketone) (PEK) were studied in N-cyclohexyl-2-pyrrolidone (CHP), which is a high-boiling aprotic polar solvent. The formation of high-molecular weight PEEK and PEK in this solvent was very efficient. The reactivity in CHP can be ascribed to effective solvation of metal ions rendering the anion very reactive toward nucleophilic substitution. The polymerization was extended to 4,4′-bis(4-fluorobenzoyl)diphenyl ether and 1,4-bis[4-(4-fluorobenzoyl)phenoxy]benzene to give a high molecular weight polymer with PEK and PEEK repeating units and PEEK respectively. The polymerization of DFB with purified anhydrous sodium sulfide in CHP gave rapidly a high molecular weight poly(phenylene ketone sulfide) (PKS). In contrast, diphenyl sulfone (DPS) was not very effective in obtaining such a high molecular weight PKS even with prolonged heating, which suggests the uniqueness of CHP in promoting a high degree of polymerization.     

基于季铵化烯丙基缩水甘油醚改性的阴离子交换固定相的制备北大核心CSCD

制备了一种季铵化烯丙基缩水甘油醚(allyl glycidyl ether,AGE)改性聚合物基质的阴离子固定相应用于离子色谱系统。它是利用AGE与水解的聚甲基丙烯酸缩水甘油酯-二乙烯基苯poly(glycidylmethacrylate-divinylbenzene,GMA-DVB)微球表面残留双键通过表面自由基共聚,再通过N,N-二甲基乙醇胺(一种叔胺)进行开环反应制备得到的。通过考察有机叔胺类型、微球水解、单体和引发剂用量、反应温度和时间对7种阴离子分离性能的影响,优化了制备条件。采用扫描电镜、元素分析对所得阴离子固定相进行了表征。结果表明,采用预先水解的GMA-DVB微球(水解过程中微球表面丰富的环氧基团转化为羟基)相对于直接采用GMA-DVB微球有助于降低固定相的交换容量和微球自身的非离子吸附作用;通过淋洗液浓度和目标离子保留因子的拟合结果证实了该固定相保留机理为典型的离子交换作用。使用碳酸根淋洗液,在优化的色谱条件下,该固定相可在13 min内实现常见7种无机阴离子的基线分离,并表现出较高的柱效(Cl-理论塔板数为49000块/m)。该色谱柱实用性通过分析自来水实际样品进行了验证。     

Ionic polymerization of p-vinylbenzyl methyl ether

Ionic polymerizations of vinylbenzyl methyl ether initiated by either carbanions or Lewis acids has been found to lead to crosslinked polymers. By comparative studies of strong carbanionic bases and Lewis acids with benzyl ethers, it has been possible to define details of mechanisms which in conjunction with cationic or anionic propagation lead to crosslinks. The α-hydrogens of benzyl ethers have been found to be sufficiently acidic to terminate anionic polymerization of styrene and displacement of alkoxide anion from the benzyl ether linkage by nucelophilic polymer anions is proposed as a mechanism leading to branching and eventual crosslinking in anionic polymerization of vinylbenzyl methyl ether. Cationic polymerization of vinylbenzyl methyl ether is quite complex. In addition to propagation, chain transfer, and spontaneous termination of cation chain carriers, there is evidence for complex formation between Lewis acid initiator and the benzyl ether substituent. A slow decomposition of ether–Lewis acid complexes produces benzylcarbonium ions which alkylate aromatic rings of polymer and thereby crosslink the polymer. Benzyl ether has been found to be an effective chain terminator for cationic styrene polymerization.     

Preparation and evaluation of novel chiral stationary phases based on quinine derivatives comprising crown ether moieties

The C9‐position of quinine was modified by meta‐ or para‐substituted benzo‐18‐crown‐6, and immobilized on 3‐mercaptopropyl‐modified silica gel through the radical thiol‐ene addition reaction. These two chiral stationary phases were evaluated by chiral acids, amino acids, and chiral primary amines. The crown ether moiety on the quinine anion exchanger provided a ligand‐exchange site for primary amino groups, which played an important role in the retention and enantioselectivity for chiral compounds containing primary amine groups. These two stationary phases showed good selectivity for some amino acids. The complex interaction between crown ether and protonated primary amino group was investigated by the addition of inorganic salts such as LiCl, NH₄Cl, NaCl, and KCl to the mobile phase. The resolution results showed that the simultaneous interactions between two function moieties (quinine and crown ether) and amino acids were important for the chiral separation.     

Coupled transport membranes incorporating a polymeric crown ether carboxylic acid

Polymer membranes, cast from a blend of a polymeric crown ether carboxylic acid and a polyaramid support polymer, were similar in structure to asymmetric membranes prepared from the support polymer alone. In the presence of a transmembrane pH gradient simultaneous cation-proton countertransport and anion-proton cotransport occurs. Rate constants for transport of protons, cations and anions were evaluated under steady-state and non-steady-state conditions and empirical rate equations for the transport process were derived from initial rate experiments under steady state conditions. Cation transport depends upon the cation concentration in the basic phase and the proton concentration in the acidic phase with relative kinetic orders of 1:1. Anion transport depends upon the concentrations of anions and protons in the acidic phase and inversely upon the basic phase cation concentration with relative kinetic orders of 1:1:-2. These results are rationalized by a transport mechanism, rate limited by hopping of ions between adjacent crown ether sites within the membrane. The membrane is essentially non-selective for anion transport but exhibits cation selectivity typical of the crown ether moiety.     

Simple and efficient synthesis of thysanone methyl ether

The synthesis of thysanone methyl ether is achieved by employing semivioxanthin methyl ether, which in turn is prepared by the tandem Michael addition of an anion of orsellinate to a substituted dihydropyrone.     

Preparation of Anion Exchanger for High-Efficiency Purification of Halogen-substituted Hydrocarbon Solvents Used To Clean Metal Optics

Phenomenon of rising sorption capacity of AV-17-8 anion exchanger upon an increase in its humidity due to the superequivalent absorption of Cl^– ions was revealed and substantiated. The purification of halogensubstituted hydrocarbon solvents to remove acids under dynamic conditions by the ion-exchange method and the dynamics of sorption by anion exchangers of halogen-substituted solvents from model solutions were studied. It was shown that AV-17-8 anion exchanger is stable in halogen-substituted solvents and, when present in the OH–form, raises their stability against destruction, and the equilibrium sorption capacity of the anion exchanger is 2–3 times its exchange capacity.     

Dimethyl ether and dimethyl-d6 ether chemical ionization mass spectrometry of nitramines,nitroaromatics and related compounds

Dimethyl ether (DME) chemical ionization mass spectrometry with introduction by direct exposure desorption was utilized for the characterization of a variety of nitramines, nitroaromatics and related compounds. For the nitramines and for many of the nitroaromatics the most abundant ions were fragment-molecule adduct ions resulting from ion-molecule reactions with the reagent gas. Nitroaromatic positional isomers were readily distinguished by large differences in the abundances of the various adduct ions. For the nitramines, collision-induced dissociations of the prominent methoxymethylene adduct ions were studied and contrasted with those of the corresponding adducts derived from DME-d₆ as reagent gas.     

Extraction of iridium (IV) from hydrochloric acid media with crown ether in chloroform, and its determination by ICP-AES

A new method for the quantitative extraction and determination of trace amounts of iridium from hydrochloric acid media has been established based on the formation of an ion-association complex of iridium hexachloro anion IrCl6(2-) with dicyclohexyl-18-crown-6 (DC18C6) oxonium cation in chloroform, then determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). The effect of various factors (solvent, acid concentration, crown ether, reagent concentration, shaking time, composition of the extracted species, foreign ions, etc.) on the extraction and back-extraction of iridium has been investigated. The procedure was used to determine traces of iridium in palladium chloride and rhodium chloride.     

Preparation and characterization of monovalent cation selective sulfonated poly(ether ether ketone) and poly(ether sulfone) composite membranes

Highly charged cation permeable composite membranes were prepared by blending of sulfonated poly(ether sulfone) (SPES) with sulfonated poly(ether ether ketone) (SPEEK) in 0 to 90% weight ratio, to adjust the hydrophobic properties and ion selective nature. Extent of sulfonation was confirmed by 1H NMR and ion exchange capacity and degree of sulfonation depending on blending composition. These membranes were characterized as a function of weight fraction of SPEEK by recording ion-exchange capacity, water uptake, thermogravimetric analysis, membrane conductivity and membrane potential in equilibration with different electrolytic solutions. Membrane permselectivity and solute flux were estimated using these data on the basis of non-equilibrium thermodynamic principles and for observing the selectivity of different membranes for mono- or bivalent counter-ions. It was observed that relative selectivity for monovalent in comparison to bivalent counter-ions were increased with the decrease in SPEEK content in the composite membrane matrix. The range of SPEEK content in the blend from 60 to 80% appears the most suitable for the selective separation of monovalent ions from bivalent ions. Furthermore, highly charged nature and stabilities of these membranes extend their applications for the electro-assisted separations of similarly charged ions as well as other electro-membrane processes.     

Synthesis and photochromism of spirobenzopyrans and spirobenzothiapyran derivatives bearing monoazathiacrown ethers and noncyclic analogues in the presence of metal ions

Spirobenzopyrans bearing monoazathiacrown ethers and noncyclic analogues were synthesized, and their ion-responsive photochromism depending on the dual metal ion interaction with the crown ether and the phenolate anion moieties was examined using alkali and alkaline-earth metal ions, Ag(+), Tl(+), Pb(2+), Hg(2+), and Zn(2+). The prepared spirobenzopyrans showed a selective binding ability to Mg(2+) and Ag(+) with negative and positive photochromism, respectively. Among the metal ions, only Ag(+) facilitated photoisomerization to the corresponding merocyanine form. Depending on the ring size of the monoazathiacrown ether moieties, soft metal ions such as Hg(2+) and Ag(+) showed significant shifts in the UV-vis absorption spectra, while hard metal ions such as Mg(2+), Zn(2+), and Pb(2+) did not afford any meaningful shift. This result reflects that the monoazathiacrown ether and phenolate anion moieties prefer soft and hard metal ions, respectively. Therefore, the Mg(2+) and Ag(+) selectivities are mainly derived from the phenolate anion and monoazathiacrown ether moieties, respectively. On the other hand, a spirobenzothiapyran bearing 3,9-dithia-6-monoazaundecane showed a remarkable selectivity to Ag(+).     

Preparation of Anion Exchange Membrane Based on Imidazolium Functionalized Poly(arylene ether ketone)

The authors presented a novel synthetic route for the imidazolium functionalized poly(arylene ether ketone)s, derived from an engineering plastics polymer, a poly(arylene ether ketone) with 3,3',5,5'-tetramethyl-4,4'-dihydroxybiphenyl moiety(PAEK-TM). The preparation of anion exchange membranes comprised converting benzylic methyl groups to bromomethyl groups by a radical reaction, followed by the functionalization of bromomethylated PAEK with alkyl imidazoles, i.e., methyl, butyl or vinyl imidazole. The structure of imidazolium functionalized PAEK was proved by ¹H NMR spectra. A class of flexible and tough membranes was then achieved by subsequent film-forming and anion exchange processes. The water uptake and hydroxide conductivities of membranes are comparable or superior to those of quaternary ammonium(QA) anion exchange membranes. This work demonstrated a new route for non-QA anion exchange membrane design, avoiding the chloromethylation reagent and precisely controlling the degree and location of imidazolium groups.     

Sorption of M(III) with KFP-12 Phosphonic Cation Exchanger from Chloride Solutions

Sorption by KFP-12 phosphonic anion exchanger of ions of triply charged metals, such as indium, gallium, yttrium, and iron, from chloride solutions was studied. The nature of bonding between sorbed cations and functional groups of the cation exchanger and the mechanism of the ion exchange reaction were elucidated.     

The Claisen rearrangement of protonated allyl phenyl ether

Molecular protonated ions of allyl phenyl ether undergo a Claisen rearrangement both in the ion source and along the flight path. The rearranged ions undergo fragmentation, the predominat loss being ethene, and only a small contribution from loss of carbon monoxide is observed. Collision-induced dissociation spectra are used to verify the structures of the daughter ions. These spectra, together with other evidence of an acid-induced ortho rearrangement, allow a mechanism to be proposed for the ethene loss. In contrast, molecular protonated ions of propargyl phenyl ether lose exclusively carbon monoxide.     

Advantages and disadvantages of various kinds of adsorbents used in industrial extraction of [Au(CN)<Subscript>2</Subscript>]<Superscript>–</Superscript> anions from cyanide solutions and pulps

Comparative study of an industrially used activated carbon of WSC-207C-GR brand, strongly basic anion exchanger MINIX, and weakly basic anion exchanger Purogold S992 in recovery of [Au(CN)₂]^– ions from cyanide aqueous solutions and slurries was carried out. It was found that the strongly basic anion exchanger MINIX has the highest adsorption rate of the cyanide complex of gold(I), whereas the activated carbon and the weakly basic ion exchanger possess a substantially higher selectivity toward the complex of gold(I). Use of each of the three sorbents makes it possible to solve the problem of the cyanide leaching of gold from ores containing natural substances that exhibit adsorbent properties with respect to the dicyanoaurate(I) ion. The influence exerted by the amount of kerosene additive and volume fraction of a sorbent on the efficiency of gold recovery by the sorbent in cyanidation of ores in the “carbon-in-pulp” and “resin-in-pulp” modes.     

A proton-driven amino acid pump: lipophilic primary ammonium cation—crown ether complex as a new type of anion-transport carrier

A lipophilic primary ammonium cation—crown ether complex was shown to mediate effectively active and passive transport of amino acid derivatives via proton/amino acid anion cotransport as well as anion/amino acid anion countertransport. It may offer a new chemical analog to amino group-containing carrier proteins and a prototype for an anion separation membrane.     

Multiple-stage mass spectrometry analysis of bisphenol A diglycidyl ether, bisphenol F diglycidyl ether and their derivatives

The fragmentation of bisphenol A diglycidyl ether (BADGE), bisphenol F diglycidyl ether (BFDGE) and their derivatives was studied by electrospray ionization tandem mass spectrometry. Multiple-stage mass spectrometry and accurate mass measurements were combined to establish the fragmentation pathways. BADGEs and BFDGEs tend to form ammonium adducts under electrospray conditions which fragmented easily. The fragmentation of [M+NH(4)](+) for BADGEs started with the cleavage of the phenyl-alkyl bond, which was followed by the α-cleavage of the ether group to generate the characteristic product ions at m/z 135, [C(9)H(11)O](+), and m/z 107, [C(7)H(7)O](+). The fragmentation of the BFDGE isomer mixtures was studied by on-line reversed-phase liquid chromatography coupled to multiple-stage mass spectrometry (LC/MS(n)). Information obtained from product ion spectra for each BFDGE isomer and its comparison with the fragmentation pathway of BADGE allowed each isomer and the chromatographic elution order to be identified.     

A novel composite stationary phase composed of polystyrene/divinybenzene beads and quaternized nanodiamond for anion exchange chromatography

Anion exchangers were prepared through agglomerating quaternized nanodiamods or cationic polyelectrolyte with sulfonated polystyrene/divinylbenzene. These particles showed good separation efficiency after hyperbranched by methylamine and 1,4-butanediol diglycidyl ether.     

Polyfunctional Anion Exchanger as Sorbent of Copper(II) and Vanadium(V) Ions

Sorption of copper and vanadium ions from aqueous solutions by cross-linked anion exchanger based on a copolymer of glycidyl methacrylate with styrene and polyethylenimine was studied. The effect of the solution pH on the completeness of sorption is considered.     

Synthesis, complexation properties and crystal structure of 4'''',5''''-dibromo-oxylyl-17-crown-5 ether

4',5'-Dibromo-o-xylyl-17-crown-5 ether (2BrB17C5) was synthesized,starting from 1,2-dibromo-4,5-bis(bromomethyl)-benzene and tetraethylene glycol,and was characterized by 1H NMR,MS and elemental analysis.Pale yellow prismatic single crystal obtained from anhydrous ethanol was investigated by X-ray structural analysis.The complexation properties toward alkali metal ions were examined using the solvent extraction method and UV absorption spectroscopy.The crown ether was found to be conformationally deformed and oblate-like and is highly selective for lithium ion.