Effect of pH on the adsorption of Ce3+, Sm3+, Eu3+ and Gd3+ ions on activated charcoal

The adsorption of metal ions such as Ce³⁺, Sm³⁺, Eu³⁺ and Gd³⁺ ions on activated charcoal has been studied as a function of pH. The adsorption mechanism of these ions is discussed in terms of hydrolyzed species formed in aqueous solution at different pH.     

Growth and Spectroscopic Properties of Nd3＋：Sr3Gd2（BO3）4 Crystal

<正>This paper reports the growth,X-ray diffraction and spectroscopy of Nd~(3+):Sr_3Gd_2(BO_3)_4 crystal.A Nd~(3+):Sr_3Gd_2(BO_3)_4 crystal with dimensions ofφ20×45 mm~3 has been grown by the Czochralski method.Nd~(3+):Sr_3Gd_2(BO_3)_4 crystal belongs to the orthorhombic system,space group Pnma(D_(2h))with a=0.7401,b=1.604 and c=0.8755 nm.The absorption and emission spectra of Nd~(3+):Sr_3Gd_2(BO_3)_4 were investigated.The absorption cross sectionσ_a is 3.11×10~(-20)cm~2 at 808 nm. The absorption transition at 808 nm has an FWHM of 14 nm.The luminescence lifetimeτ_f is 51.7 us.The emission cross sectionσ_e at 1064 nm wavelength is 1.09×10~(-19)cm~2.     

Studies of C. I. Acid Red 186 and Metal Complexes with Uo++2, Ce3+ and Th6+ Ions

The electronic absorption spectra of C. I. Acid Red 186 are studied in solution of different pH. The pK values of the acid-base equilibria set are determined and commented upon. The complexes of UO⁺⁺₂, Ce³⁺ and Th⁴⁺ ions are investigated by some spectroscopic techniques and potentiometric titration. The formation of 1:1, 1:2 and 1:2 complexes (M:L) with UO₂⁺⁺, Ce³⁺ and Th⁴⁺ respectively is confirmed and their conditional stability constants are determined. The solid complexes are prepared and analysed for their metal content, their ir spectra are disussed in comparison to that of the ligand to establish the bonding between the ligand and metal ions.     

Studies on the reaction of salicylidenebenzoic-hydrazide (SBH) with Ce3+, Th4+ and UO2 2+

The stoichiometry and structure of salicylidenebenzoic-hydrazine (SBH) chelates with UO₂(II), Ce(III) and Th(IV) in buffer-ethanol mixtures and in pure ethanol is studied applying conductometric titration, visible spectrophotometry and ir-spectrophotometry. The ir-spectra revealed that coordination takes place through the C=O and C=N groups.Deceased December 1977.     

La0.5>RE0.3Sr0.2FeO3－δ (RE = Nd、Ce、Sm)体系双稀土阴极材料的制备与电性能

采用甘氨酸-硝酸盐法(GNP)合成了La0.5RE0.3Sr0.2FeO3－δ(RE=Nd、Ce、Sm)系列复合氧化物粉体. 用X射线衍射(XRD)和TG-DSC分析了样品钙钛矿物相的形成过程, 用Archimedes排水法测量体积密度并计算烧结样品的相对密度, 用四端子技术测量电导率. 结果显示, 掺Nd的样品1200 ℃烧结2 h成为单一立方钙钛矿结构, 掺Ce样品有明显的CeO2立方相析出, 掺Sm样品主相为钙钛矿结构伴有微弱的杂峰. 1250 ℃烧结2 h的La0.5Nd0.3Sr0.2FeO3－δ在600 ℃时电导率高达100 S•cm-1以上, 明显高于La0.5Ce0.3Sr0.2FeO3－δ及La0.5Sm0.3Sr0.2FeO3－δ样品的电导率, 预示着La0.5Nd0.3Sr0.2FeO3－δ可能是一种良好的中温固体氧化物燃料电池(SOFC)阴极材料.     

Preparation of Activated Carbon From Olive Stone Waste: Optimization Study on the Removal of Cu2+, Cd2+, Ni2+, Pb2+, Fe2+, and Zn2+ from Aqueous Solution Using Response Surface Methodology

The removal efficiencies of Cu²⁺, Cd²⁺, Ni²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ from aqueous solution with olive stone activated carbon (OSAC) were investigated in this paper. Central composite design method was used to optimize the preparation of OSAC by chemical activation using potassium hydroxide (KOH) as chemical agent. The optimum conditions obtained were 715°C activation temperature, 2 hours activation time, and 1.53 impregnation ratio. This resulted in removal of 99.25% Cu²⁺, 94.98% Cd²⁺, 99.08% Ni²⁺, 99.33% Pb²⁺, 99.41% Fe²⁺, and 99.17% Zn²⁺, as well as 73.94% OSAC yield. The surface characteristics of the activated carbon (AC) prepared under optimized condition were examined by pore structure analysis, scanning electron microscopy, and Fourier transform infrared spectroscopy. The Brunauer–Emmett–Teller (BET) surface area, total pore volume, and average pore diameter of the prepared activated carbon were 886.72 m²/g, 0.507 cm³/g, and 4.22 nm, respectively. The equilibrium data of the adsorption was well fitted to the Langmuir and the highest value of adsorption capacity (Q) on the OSAC was found for Fe²⁺ (57.47 mg/g), followed by Pb²⁺ (22.37 mg/g), Cu²⁺ (17.83 mg/g), Zn²⁺ (11.14 mg/g), Ni²⁺ (8.42 mg/g), and Cd²⁺ (7.80 mg/g). The prepared OSAC can be used for efficient removal of metals from contaminated wastewater.     

Synthesis of sulfhydryl-functionalized polymers for the efficient adsorption of Pd2+ and Ag+ from aqueous solution

Herein, two sulfhydryl-functionalized polymers, namely, EDT-HCPS and TMPMP-HCPS, were synthesized according to the Friedel-Craft s alkylation and nucleophilic substitution, and they were used to adsorb Pd²⁺ and Ag⁺ from aqueous solution. The Friedel-Crafts alkylation offered the polymers with hyper-cross-linking frameworks composed of plentiful rigid methylene. The nucleophilic substitution brought abundant functional  SH groups (the sulfur contents were 12.6 and 9.4 wt%, respectively) to the polymers. The adsorption results showed that the capacities of Pd²⁺ and Ag⁺ on EDT-HCPS were larger than TMPMP-HCPS, and the higher quantities of functional  SH groups and the porosity played a beneficial role. The equilibrium data can be characterized by the Langmuir model, and the maximum capacities of Pd²⁺ and Ag⁺ on EDT-HCPS at 308 K were predicted to be 383.92 and 212.93 mg g⁻¹, respectively. The produced polymers represented superior adsorption selectivity, reproducibility, and reusability, demonstrating their excellent performance for the adsorption of Pd²⁺ and Ag⁺, and analysis of the adsorption mechanism demonstrated that the  SH groups played a major role due to the strong chemical complexation of the functional  SH with Pd²⁺/Ag⁺.     

Simultaneous removal of Cu2+ and Cr3+ ions from aqueous solution based on Complexation with Eriochrome cyanine‐R and derivative spectrophotometric method

TiO₂ nanoparticles deposited on activated carbon (TiO₂–NP–AC) was prepared and characterized by XRD and SEM analysis. Subsequently, simultaneous ultrasound‐assisted adsorption of Cu²⁺ and Cr³⁺ ions onto TiO₂‐NPs‐AC after complexation via eriochrome cyanine R (ECR) has been investigated with UV–Vis and FAA spectrophotometer. Spectra overlapping of the ECR‐Cu and ECR‐Cr complex was resolve by derivative spectrophotometric technique. The effects of various parameters such as initial Cu²⁺ (A) and Cr³⁺ (B) ions concentrations, TiO₂‐NPs‐AC mass (C), sonication time (D) and pH (E) on the removal percentage were investigated and optimized by central composite design (CCD). The optimize conditions were set as: 4.21 min, 0.019 mg, 20.02 and 13.22 mg L^?1 and 6.63 for sonication time, TiO₂–NP–AC mass, initial Cr³⁺ and Cu²⁺ ions concentration and pH, respectively. The experimental equilibrium data fitting to Langmuir, Freundlich, Temkin and Dubinin–Radushkevich models show that the Langmuir model is a good and suitable model for evaluation and the actual behavior of adsorption process and maximum adsorption capacity of 105.26 and 93.46 mg g^?1 were obtained for Cu²⁺ and Cr³⁺ ions, respectively. Kinetic evaluation of experimental data showed that the adsorption processes followed well pseudo second order and intraparticle diffusion models.     

Effects of Different Solvent Characteristics on the Proton-Ligand and Ni2+-, Sm3+-, AND Yb3+- Ligand Formation Constants of 5,5-Dimethyl-Cyclohexane-2-(2-Hydroxyphenyl)Hydrazono- 1,3-Dione (DCPHD) in Various Mixed Aqueous Solvents-(II)

Complex equilibria of DCPHD with proton and Ni²⁺, Sm³⁺, and Yb³⁺ ions has been measured in various mixed aqueous solvents, viz: isopropanol-water, acetone-water, ethanol-water, and methanol-water. Based on potentiometric equilibrium measurements of hydrogen ion concentration at 30°C, ionic strenght 0.10 M (KNO₃) and in the above various mixed aqueous solvents, the values of the protonation constants of DCPHD and the stability constants of DCPHD with Ni²⁺, Sm³⁺, and Yb³⁺ have been evaluated. The variation of protonation and stability constants with the inverse of dielectric constant or mole fraction of the solvent was studied. Application of Fuoss expression and consideration of electrosatic and non-electrostatic effects are made to explain the values of the constants.     

Density functional study of H2 molecule and H atom adsorption on α‐U(001) surface

Density functional theory method has been employed to investigate the adsorption of H₂ molecule and H atom on α‐U(001) surface. There exist four initial sites [top (A), triangle‐center (B), long‐bridge (C), and short‐bridge (D)] for H₂ and H atom adsorptions on α‐U(001) surface. The E_ads (adsorption energy) values on the top sites of H₂‐U(001) configurations are around ?0.666 eV, and H₂ molecule has been elongated but not broken into H atoms. For the other three sites, the E_ads values are around ?1.521 eV. The long‐bridge site is the most reactive site for H₂ decomposing. For the H‐U(001) configurations, the E_ads are around ?2.904 eV. Top site and short‐bridge site are the most reactive sites for the H atom react on the α‐U(001) surface. Our work reveals that the different reactive sites play discrepant effects on hydrogenation process. Geometric deformations, diffusion paths, and partial density of states of H₂‐U(001) and H‐U(001) configurations have also been analyzed. Copyright © 2016 John Wiley & Sons, Ltd.