溶剂热合成具有纳米孔结构的γ -Al2O3

Nanoporous gamma aluminum oxide (γ-Al₂O₃) was synthesized by solvothermal method in the presence of AlCl₃·6H₂O, urea and alcohol. The calcined sample was characterized by XRD, FTIR, TEM, and Nitrogen adsorption-desorption measurement. Results show that the obtained γ-Al₂O₃ is well-dispersed nanoparticles with particle size of 4～7 nm and the product has nano-pore structure with a narrow pore size distribution of 5～20 nm.     

附载CeO2的纳米γ-Al2O3合成及其悬浮液的分散稳定研究

以异丙醇铝和六水硝酸亚铈为铈源和铝源,采用溶胶-凝胶法制备了前驱体,并将前驱体在800℃下空气中焙烧2 h得到附载CeO2的高纯纳米γ-Al2O3.样品经X射线衍射(XRD)、透射电镜(TEM)、比表面积(BET)、化学成分和杂质含量分析,结果表明:合成的粉末为由γ-Al2O3和CeO2组成的混合物相,两者均属立方晶系,其中γ-Al2O3空间群为O7H-FD3M,CeO2空间群为Fm3m;晶粒平均粒径为15.7 nm,颗粒平均粒径约60～80 nm,粒子呈类球形,比表面积为159.01 m2·g-1;粒子纯度不低于99.97%,CeO2含量为24.22%.红外光谱(IR)测试结果显示,有Al-O-Ce键生成,表明CeO2与Al2O3并非简单混合.进一步通过对其悬浮液体系Zeta电位和吸光度的测定,研究了不同pH值条件、分散剂种类和用量以及氧化剂对其悬浮液分散稳定性的影响;采用超声波分散法,选择硝酸、氢氧化钾溶液作为pH调节剂,异丙醇胺作为分散剂,过氧化氢作为氧化剂,成功制备了长期存放不沉降的附载CeO2的纳米γ-Al2O3CMP浆料,确定了配制的优化工艺条件.     

溶剂热法制备纳米晶Sb2O3

以 SbCl3为锑源,采用溶剂热法制备了纳米Sb2O3(1),其结构经XRD和SEM表征.溶剂的种类和体系 pH可以控制1的晶型及形貌.水作溶剂时,1为板状斜方晶型;乙醇作溶剂时,1为单一斜方晶型或立方和斜方混合晶型;用乙醇和乙二醇混合溶剂时,1为斜方晶型;用乙醇和异丙醇混合溶剂时1为单一立方晶型.     

溶剂热合成具有海绵状结构的介孔SnO2

采用溶剂热方法, 以SnCl4·5H2O/尿素/乙醇三元体系合成了具有特定结构的前驱体, 该前驱体经焙烧后得到了具有海绵状结构的介孔SnO2. 利用X射线粉末衍射(XRD)、傅立叶红外吸收光谱(FT-IR)、透射电镜(TEM)、热分析(TG-DTA)和氮气等温吸附鄄脱附等方法对产物的结构、形貌和热稳定性进行表征. 结果表明, 300 ℃焙烧处理后的样品由粒径约为5 nm的纳米粒子堆积而形成海绵状结构, 其中孔的尺寸范围在2-8 nm, 样品比表面积达到了134 m2·g-1.     

Co3O4 纳米棒的溶剂热合成及形成机理分析

Co3O4 nanorods have been synthesized at 160℃ for 10 h in the solution of oleic and n-cetane by an emulsion-solvothermal method using Co（NO3）2·6H2O as starting materials. The as-prepared product was characterized by X-ray powder diffraction（XRD）,transmission electron microscope（TEM）,and vibrating sample magnetometer（VSM）. The formation mechanism of the prepared product was analyzed based on formation of rod-like micelles of oleic acid. Cobalt ions can migrate into the micelle core for the nucleation and growth of Co3O4 . The results show that the as-prepared Co3O4 nanorods are with the average size 25×100 nm and in the cubic phase. The magnetic susceptibility meets about linearly with the applied magnetic field at room temperature,and the coercivity （Hc）and remanent magnetization（Ms）values of the product at room temperature are 353 Oe and 0.4 emu/g,respectively. This simple route is also expanded to synthesize other materials with the rod-like morphology.     

柔性α-Al2O3纳米结构纤维的制备与表征

制备了致密柔性的α-Al2O3,纳米结构纤维,并表征了纤维的微观结构和断裂强度及断裂伸长率等力学性质,讨论了影响纤维性能的因素,实验结果表明,纤维由厚度为30～50 nm 的纳米片构成,没有孔洞和裂纹,具有良好的抗热震性,同商品α-Al2O3纤维相比具有较高的断裂强度及断裂伸长率.     

改性γ-Al2O3微填充柱色谱分析氢同位素

使用Cr2O3改性后的γ-Al2O3微填充色谱柱,分析了He、H2、HD、D2混合气体.结果表明,经改性后的γ-Al2O3柱对氢同位素分析的谱图在峰型、保留时间、柱效等方面明显优于未经改性的γ-Al2O3柱.在柱温77.4 K、氖载气流速30 mL/min、进样量5~100 μL条件下,氢同位素各组分线性关系良好,谱峰...     

载体孔结构对丁炔二醇二段加氢Ni/γ-Al2O3催化剂加氢性能的影响

以三种不同孔结构的γ-Al2O3为载体,采用等体积浸渍法制备Ni/γ-Al2O3催化剂,经低温氮气吸附、TPR、H2-TPD、XRD、TEM等物性结构表征及丁炔二醇催化合成1,4-丁二醇二段加氢性能评价结果表明,比表面积293m2·g-1、最可几孔径9.4 nm的γ-Al2O3制备的Ni/γ-Al2O3,具有较高的分散度和较多的活性结构中心以及适宜的孔径分布(小于4 nm孔体积分数为12.34%、4～18 nm孔体积分数为64.42%、大于18 nm孔体积分数达23.24%),对丁炔二醇二段加氢表现出较高的加氢活性和稳定性.     

负载型固体碱催化剂K2O/γ-Al2O3的新型合成法及微量吸附量热研究

用浸溃法制备KNO2/Al2O3样品,所得样品于973K下焙烧并抽空2h便制得负载型固体碱K2O/γ-Al2O3.拉曼光谱显示973K抽空的样品KNO3,已完全分解成K2O.用CO2作探针分子,微量吸附量热结果表明973K抽空的样品碱性比纯MaO的还强.这种强碱性应为KNO3完全分解成K2O物种所致,而γ-Al2O3载体的存在可增强KNO3的分解.     

异丁烷脱氢V2O5/γ-Al2O3催化剂的研究

五氧化二钒;异丁烷脱氢V2O5/γ-Al2O3催化剂的研究     

溶剂热法制备铝掺杂的氧化锌透明导电薄膜

采用溶剂热法在玻璃基片上沉积铝掺杂的氧化锌透明导电膜(AZO)。研究了前驱溶液中Al3+与Zn2+的物质的量的比nAl3+/nZn2+、溶剂热反应温度和反应时间对薄膜物相、形貌、可见光透过率和电阻率的影响。结果表明,溶剂热法所制备的AZO薄膜具有六方纤锌矿结构,Al3+不仅改善薄膜的导电性而且起矿化剂的作用促进薄膜生长,溶剂热反应时间的增加没有使薄膜显著增厚。采用溶剂热法可制备出可见光平均透过率大于80%、方块电阻小于500Ω的AZO薄膜。     

溶剂热法合成蜂巢状氧化镍及其电化学电容性能

利用N，N-二甲基甲酰胺(DMF)为溶剂的溶剂热法制备了蜂巢状氧化镍，反应过程中DMF既做溶剂又做沉淀剂。研究了不同制备条件对NiO形貌及电化学性质的影响，并用X-射线衍射(XRD)、扫描电子显微镜(SEM)以及循环伏安(CV)技术进行了表征。结果表明，300 ℃热处理得到的氧化镍，10 mA电流下单电极比电容达460 F·g^-1。     

Synthesis of Aluminum Oxide Nanostructures on the Silicon Surface

Data on the synthesis of aluminum oxide nanostructures on the silicon surface by the oxidation of atomic aluminum layers with a high-frequency inductively coupled oxygen discharge plasma are reported. The conditions for the formation and the properties of aluminum oxide nanolayers were determined. It was found that this method affords oxide films with uniform structure and composition.__________Translated from Khimiya Vysokikh Energii, Vol. 39, No. 5, 2005, pp. 379–381.Original Russian Text Copyright © 2005 by Potapov, Matyuk, Trakhtenberg.     

溶剂热-热解法制备具有纳米孔结构的Co3O4

Nanoporous rhombohedral Co₃O₄ was synthesized by thermal decomposition of the precursor obtained via a solvothermal method in the presence of Co(CH₃COO)₂·4H₂O, urea, sodium dodecyl sulfate (SDS), ethanol and water. The calcined sample was characterized by XRD, FTIR, SEM, TG-DTA, Nitrogen adsorption-desorption, cyclic voltammetry and galvanostatic charge/discharge measurements. The results show that the calcined sample at 400 ℃ is rhombohedral structure Co₃O₄ with nano-porosity assembled by uniform nanosheets. The BET surface area is 49 m²·g^-1 and its specific capacitance as single electrode is up to 233.4 F·g^-1 at 5 mA·cm^-2 current density.     

溶剂热法制备纳米氧化镍及其表征

以乙酰丙酮镍、油酸、油胺为原料，十八烯为溶剂，聚乙烯吡咯烷酮为表面活性剂，采用溶剂热法，在不同反应条件制备了纳米级氧化镍材料.通过X射线衍射（X-ray diffraction，XRD）、透射电子显微镜（Transmission electron microscope，TEM）、紫外-可见光吸收光谱（Ultraviolet-visible spectroscopy，UV-Vis）光谱分析以及塔菲尔（Tafel）测试考察了反应物比例、保温时间、表面活性剂（PVP）、油胺的量对产物微结构、粒径、形貌、光学以及电化学活性性能的影响.实验结果表明：在反应物n[Ni（acac）₂]∶n（OA）=1∶2、添加剂PVP质量分数为1.66%、油胺物质的量为30 mmol、200℃下保温8 h时，可获得粒径约为30～40 nm纯相氧化镍，具有最佳电化学活性，交换电流密度为J₀=1.23×10^-2 mA·cm^-2.     

Synthesis and Characterization of Ru-Loaded Anodized Aluminum Oxide for Hydrogenation Catalysis

Anodized aluminum oxides (AAOs) are synthesized and used as catalyst support in combination with Ru as metal in hydrogenation catalysis. SEM and TEM analysis of the as-synthesized AAOs reveal uniform, ordered nanotubes with pore diameters of 18 nm, which are further characterized with Kr physisorption, XRD and FTIR spectroscopy. After impregnation of the AAOs with Ru, the presence of Ru nanoparticles inside the tubular pores is evidenced clearly for the first time via HAADF-STEM-EDX. The Ru−AAOs have been tested for catalytic activity, which showed high conversion and selectivity for the hydrogenation of toluene and butanal.     

溶剂热制备氧化锌纳米线

ZnO nanowires were synthesized mildly through an absolute alcohol solvothermal process at 120 ℃ for 12 h using ZnAc₂·2H₂O and NaOH as raw materials and PEG400 as a soft template. The cyrstal structure and morphology of the nanowires were characterized by XRD, SEM, TEM and HRTEM. The results indicate that the diameter of ZnO nanowires is 40 nm, the length can reach 2 μm and the nanowires are of high purity, homogeneity and well crystallinty. The influence of the various factors on the formation of ZnO nanowires and formation mechanism were also discussed.