Spontaneous transformation of CdTe nanoparticles into angled Te nanocrystals: from particles and rods to checkmarks, X-marks, and other unusual shapes

CdTe nanoparticles spontaneously transform into the branched Te nanocrystals with the unique, highly anisotropic shape of checkmarks after partial removal of the stabilizers of L-cysteine. The Te checkmarks are made in a relatively high yield and uniformity; the length of the arms is ca. 150 nm, whereas the angle between the arms is 74 degrees . Subsequent growth of the particle yields mothlike nanocrystals retaining geometrical anisotropy. Unlike the previous synthesis methods of branched nanocrystals, they are formed via a merger of individual rod-shaped crystallites. High-energy crystal faces on their apexes act as the sticky points causing the particles to join in the ends. This is the first demonstration of spontaneous transformation of binary semiconductor particles into highly anisotropic nanocolloids in an angled conformation. The end reactivity of starting Te rods can be used both for bottom-up fabrication of nanoscale electronics and relatively safe and nontoxic method of synthesis of Te-based optical and other materials.     

Crystal structures, anisotropic growth, and optical properties: controlled synthesis of lanthanide orthophosphate one-dimensional nanomaterials

The fundamental understanding of the relationship between crystal structure and the dynamic processes of anisotropic growth on the nanoscale, and exploration of the key factors governing the evolution of physical properties in functional nanomaterials, have become two of the most urgent and challenging issues in the fabrication and exploitation of functional nanomaterials with designed properties and the development of nanoscale devices. Herein, we show how structural and kinetic factors govern the tendency for anisotropic growth of such materials under hydrothermal conditions, and how the crystal structure and morphology influence the optical properties of Ln3+-doped nanocrystals. The synthesis of phase-pure and single-crystalline monoclinic, hexagonal, and tetragonal one-dimensional LnPO4 nanostructures of different aspect ratios by means of kinetically controlled hydrothermal growth processes is demonstrated. It is shown that the tendency for anisotropic growth under hydrothermal conditions can be enhanced simply by modifying the chemical potentials of species in the reaction solution through the use of carefully selected chelating ligands. A systematic study of the photoluminescence of various Eu3+-doped lanthanide phosphates has revealed that the optical properties of these nanophosphors are strongly dependent on their crystal structures and morphologies.     

Effect of trimethylamine on the formation of anatase titania nanoparticles by gel-sol method

The anatase titania particles with controlled size and shape were prepared in large amount in the presence of trimethylamine (TMA) from the hydrolysis of a Ti-triethanolamine (TEOA) complex by gel-sol method. In the absence of TMA, ellipsoidal particles were obtained due to the anisotropic growth caused by the specific adsorption of TEOA onto the crystal planes parallel to the c-axis of a titania particle. TMA acted as a complexing agent of Ti(IV) ion to promote the growth of ellipsoidal particles and then inhibited the anisotropic crystal growth to produce ellipsoids of a low aspect ratio, rather than a shape controller to produce ellipsoids with a high aspect ratio. This may be explained in terms of the weak complexing between TMA (a tertiary amine) and Ti(IV) ion. The particle size was also controlled by seeding of anatase titania. Moreover, the seeding suggested that the rate-determining step of the gel-sol process was not the dissolution of the hydroxide gel, but the deposition of the monomeric precursor from the solution phase. Some cationic surfactants also promoted the particle grown to produce particles with a high symmetry in a similar way to TMA. The text was submitted by the authors in English.     

Isolated Cobalt Ions Embedded in Magnesium Oxide Nanostructures: Spectroscopic Properties and Redox Activity

Atomic dispersion of dopants and control over their defect chemistry are central goals in the development of oxide nanoparticles for functional materials with dedicated electronic, optical or magnetic properties. We produced highly dispersed oxide nanocubes with atomic distribution of cobalt ions in substitutional sites of the MgO host lattice via metal organic chemical vapor synthesis. Vacuum annealing of the nanoparticle powders up to 1173 K has no effect on the shape of the individual particles and only leads to moderate particle coarsening. Such materials processing, however, gives rise to the electronic reduction of particle surfaces, which—upon O₂ admission—stabilize anionic oxygen radicals that are accessible to UV/Vis diffuse reflectance and electron paramagnetic resonance (EPR) spectroscopy. Multi-reference quantum chemical calculations show that the optical bands observed mainly originate from transitions into ⁴A_2g (⁴F), ⁴T_1g (⁴P) states with a contribution of transitions into ²T_1g, ²T_2g (²G) states through spin-orbit coupling and gain intensity through vibrational motion of the MgO lattice or the asymmetric ion field. Related nanostructures are a promising material system for single atomic site catalysis. At the same time, it represents an extremely valuable model system for the study of interfacial electron transfer processes that are key to nanoparticle chemistry and photochemistry at room temperature, and in heterogeneous catalysis.     

Instant Locking of Molecular Ordering in Liquid Crystal Elastomers by Oxygen‐Mediated Thiol–Acrylate Click Reactions

Liquid crystal elastomers (LCEs) with intrinsic anisotropic strains are reversible shape‐memory polymers of interest in sensor, actuator, and soft robotics applications. Rapid gelation of LCEs is required to fix molecular ordering within the elastomer network, which is essential for directed shape transformation. A highly efficient photo‐cross‐linking chemistry, based on two‐step oxygen‐mediated thiol–acrylate click reactions, allows for nearly instant gelation of the main‐chain LCE network upon exposure to UV light. Molecular orientation from the pre‐aligned liquid crystal oligomers can be faithfully transferred to the LCE films, allowing for preprogrammed shape morphing from two to three dimensions by origami‐ (folding‐only) and kirigami‐like (folding with cutting) mechanisms. The new LCE chemistry also enables widely tunable physical properties, including nematic‐to‐ isotropic phase‐transition temperatures (T_N‐I), glassy transition temperatures (T_g), and mechanical strains, without disrupting the LC ordering.     

单质铁纳米颗粒的液相还原制备

采用水合肼作还原剂, 在有柠檬酸存在的情况下, 以FeCl2为铁源, 通过液相化学还原制备粒径为15~50 nm的单质铁纳米颗粒. 采用X射线衍射(XRD)、X射线能谱仪(EDS)和场发射扫描电镜(FESEM)对制备的Fe纳米粒子的结构、组成和形貌进行了表征, 并使用超导量子干涉仪(SQUID)对制备的Fe纳米粒子的磁学性能进行了表征. 研究结果表明, 在柠檬酸存在下, 可以用肼在常温常压下液相还原亚铁离子制备出单质铁纳米颗粒, 改变络合剂后还原无法进行, 并对可能的反应机理进行了讨论.     

Synthesis of monodisperse, rodlike silica colloids with tunable aspect ratio

Although the experimental study of spherical colloids has been extensive, similar studies on rodlike particles are rare because suitable model systems are scarcely available. To fulfill this need, we present the synthesis of monodisperse rodlike silica colloids with tunable dimensions. Rods were produced with diameters of 200 nm and greater and lengths up to 10 μm, resulting in aspect ratios from 1 to ～25. The growth mechanism of these rods involves emulsion droplets inside which silica condensation takes place. Due to an anisotropic supply of reactants, the nucleus grows to one side only, resulting in rod formation. In concentrated dispersions, these rods self-assemble in liquid crystal phases, which can be studied quantitatively on the single particle level in three-dimensional real-space using confocal microscopy. Isotropic, paranematic, and smectic phases were observed for this system.     

Structural and morphological characteristics of polycrystalline BaTiO<Subscript>3</Subscript>:Er<Superscript>3+</Superscript>, Yb<Superscript>3+</Superscript> ceramics synthesized by the sol–gel route: influence of chelating agents

The preparation of a co-doped BaTiO₃:Er, Yb compound was investigated using alkoxide precursors. The complex alkoxide was hydrolyzed under specific conditions using chelating agents [(AcAc)H and H–(OAc)], and nano-size powders and films of perovskite compounds were obtained. The nanostructure materials were formed through nucleation-aggregation growth. Through a comparison of co-doped BaTiO₃:Er, Yb compounds (with and without chelating agents), important differences in shape and size of the particles were found. In addition, the use of chelating agents during the sol–gel process allowed us to obtain optical BaTiO₃:Er, Yb thin films. The results suggest that the particle size and shape can be tailored in the current system by manipulating the simultaneous use of chelating agents and the crystallization temperature. Consequently, a wide range of particle size has an effect on the crystal structures.     

Morphology-dependent nanocatalysis: metal particles

The rapid development of materials science now enables tailoring of metal and metal oxide particles with tunable size and shape at the nanometre level. As a result, nanocatalysis is undergoing an explosive growth, and it has been seen that the size and shape of a catalyst particle tremendously affects the reaction performance. The size effect of metal nanoparticles has been interpreted in terms of the variation in geometric and electronic properties that governs the adsorption and activation of the reactants as well as the desorption of the products. At the same time, it has been verified that the morphology of a catalyst particle, determined by the exposed crystal planes, also considerably affects the catalytic behavior. This is termed as morphology-dependent nanocatalysis: a catalyst particle with an anisotropic shape alters the reaction performance by selectively exposing specific crystal facets. This perspective article initially surveys the recent progress on morphology-dependent nanocatalysis of precious metal particles to emphasise the chemical nature of the morphology effect. Then, the fabrication of transition metal particles with controllable size/morphology is examined, and their shape is correlated with their catalytic properties, with the aim to clarify the structure-reactivity relationship. Finally, the future outlook presents our personal perspectives on the concept of morphology-dependent nanocatalysis of metal particles, which is a rapidly growing topic in heterogeneous catalysis.     

Synthesis of uniform anatase TiO2 nanoparticles by gel-sol method. 4. Shape control

Uniform anatase-type TiO(2) nanoparticles of different shapes have been formed by phase transformation of a Ti(OH)(4) gel matrix in the presence of shape controllers. For example, triethanolamine (TEOA) was found to change the morphology of TiO(2) particles from cuboidal to ellipsoidal at pH above 11. The shape control can be explained in terms of the specific adsorption of TEOA onto the crystal planes parallel to the c-axis of the tetragonal system in the alkaline range, as supported by the observation of preferential adsorption of TEOA onto the crystal planes parallel to the c-axis at pH 11.5 and by the pH dependence of the adsorption onto ellipsoidal particles. Diethylenetriamine (DETA) also modified the particle shape to ellipsoidal above pH 9.5 and the aspect ratio was much higher than with TEOA. The mechanism of the shape control could be explained in the same way as with TEOA, since analogous specific adsorption was observed with DETA as well. Similar shape control to yield ellipsoidal particles of a high aspect ratio was also achieved with other primary amines, such as ethylenediamine (ED), trimethylenediamine (TMD), and triethylenetetramine (TETA). However, secondary amines, such as diethylamine, and tertiary amines, such as trimethylamine and triethylamine, acted as a complexing agent of Ti(IV) ions to promote the growth of ellipsoidal particles of a low aspect ratio, rather than a shape controller to produce ellipsoids of a high aspect ratio. Sodium oleate and sodium stearate were found to modify the particle shape from round-cornered cubes to sharp-edged cubes. The mechanism was explained in terms of the reduction of the specific surface energies of the [001] and [100] planes of the tetragonal crystal system by the preferential adsorption of oleate or stearate ion onto these planes, based on the adsorption experiment using ellipsoidal and cubic particles.     

Controlled Growth of SrxBa1−xNb2O6 Hopper- and Cube-Shaped Nanostructures by Hydrothermal Synthesis

Controlling the shape and size of nanostructured materials has been a topic of interest in the field of material science for decades. In this work, the ferroelectric material Sr_xBa_1−xNb₂O₆ (x=0.32–0.82, SBN) was prepared by hydrothermal synthesis, and the morphology is controllably changed from cube-shaped to hollow-ended structures based on a fundamental understanding of the precursor chemistry. Synchrotron X-ray total scattering and PDF analysis was used to reveal the structure of the Nb-acid precursor, showing Lindqvist-like motifs. The changing growth mechanism, from layer-by-layer growth forming cubes to hopper-growth giving hollow-ended structures, is attributed to differences in supersaturation. Transmission electron microscopy revealed an inhomogeneous composition along the length of the hollow-ended particles, which is explained by preferential formation of the high entropy composition, SBN33, at the initial stages of particle nucleation and growth.     

Vanadium Pentoxide Sol and Gel Mesophases

Colloidal suspensions of V₂O₅ ribbon-like particles display optical textures typical of lyotropic nematic phases. Tactoids (small nematic droplets) and then isotropic phases are formed as these systems are diluted. Nematic suspensions can be oriented by applying a magnetic or an electric field. Such a liquid crystal behavior is mainly due to the highly anisotropic shape of vanadium oxide colloidal particles. Acid dissociation at the oxide/water interface gives rise to surface electrical charges and electrostatic repulsion should also be responsible for the stabilization of the nematic phases. Anisotropic xerogel layers are formed when these gels are deposited and dried onto flat substrates. X-ray diffraction patterns of such coatings exhibit a series of 00l harmonics due to the turbostratic stacking of the oxide particles. Dehydration is reversible and fluid mesophases are again obtained via a swelling process when water is added to the xerogel.     

Dissolution-recrystallization mechanism for the conversion of silver nanospheres to triangular nanoplates

A solution chemistry method for transforming polycrystalline Ag spherical particles into single crystalline triangular Ag nanoplates has been developed. The synthesis consists of three consecutive steps: (1) the synthesis of Ag nanospheres by NaBH(4) reduction of AgNO(3) in the presence of sodium citrate; (2) the conversion of citrate-stabilized Ag nanospheres into SDS (sodium dodecyl sulfate)-stabilized Ag nanospheres, and (3) the aging of the SDS-stabilized Ag nanospheres in 0.01 M NaCl solution. Our study indicates that the shape evolved through a Ag nanoparticle dissolution- and re-deposition process; and demonstrated the critical role of SDS in the process: SDS regulates the dynamics in the dissolved O(2)/Cl(-) etching of the Ag nanospheres and the reduction of the released Ag(+) by citrate ions in the same solution. SDS also functions as a shape-directing agent to assimilate the Ag(0) atoms into single crystalline triangular Ag nanoplates. A model for the shape conversion is also proposed which provides the clue for the synthesis of anisotropic Ag nanoparticles with other shapes (rods, wires, cubes, etc.).     

The Structure‐Controlling Solventless Synthesis and Optical Properties of Uniform Cu2S Nanodisks

Uniform Cu₂S nanodisks have been synthesized from a well‐characterized layered copper thiolate precursor by structure‐controlling solventless thermolysis at 200–220 °C under a N₂ atmosphere. The development from small Cu₂S nanoparticles (diameter ≈3 nm) to nanodisks (diameter 8.3 nm) and then to faceted nanodisks (diameter 27.5 nm, thickness 12.7 nm) is accompanied by a continuous phase transition from metastable orthorhombic to monoclinic Cu₂S, the ripening of small particles by aggregation, and finally the crystallization process. The growth of the nanoproduct is constrained by the crystal structure of the precursor and the in situ‐generated thiol molecules. Such controlled anisotropic growth leads to a nearly constant thickness of faceted nanodisks with different diameters, which has been confirmed by TEM observations and optical absorption measurements.     

Cesium Lead Halide Perovskite Nanostructures: Tunable Morphology and Halide Composition

Inorganic halide perovskite (CsPbX₃) nanostructures have gained considerable interest in recent years owing to their enhanced stability and optoelectronic applications. Recent developments in the synthesis of nanostructures are reviewed. The impact of the precursor and ligand nature, temperature and growth time on the morphology and shape tuning of CsPbX₃ nanostructures is described in relation to their optical properties. The presynthetic and postsynthetic anion exchange strategies to retain pre‐existing crystal phase and shape are discussed in this minireview.     

A novel gel deformation technique for fabrication of ellipsoidal and discoidal polymeric microparticles

A simple fabrication technique for anisotropic particles of ellipsoidal/discoidal shape has been developed, based on stretching/compressing of oil-in-water emulsion templates embedded into an elastic aqueous gel; a range of solid anisotropic microparticles have been fabricated by polymerising of the deformed oil drops in the elastic gel matrix and their shape and aspect ratios have been studied as a function of the gel deformation.     

Direct Imaging of Highly Anisotropic Photogenerated Charge Separations on Different Facets of a Single BiVO4 Photocatalyst

Spatially resolved surface photovoltage spectroscopy (SRSPS) was employed to obtain direct evidence for highly anisotropic photogenerated charge separation on different facets of a single BiVO₄ photocatalyst. Through the controlled synthesis of a single crystal with preferentially exposed {010} facets, highly anisotropic photogenerated hole transfer to the {011} facet of single BiVO₄ crystals was observed. The surface photovoltage signal intensity on the {011} facet was 70 times stronger than that on the {010} facets. The influence of the built‐in electric field in the space charge region of different facets on the anisotropic photoinduced charge transfer in a single semiconductor crystal is revealed.     

Giant Single-Crystal Shape Transformation with Wide Thermal Hysteresis Actuated by Synergistic Motions of Molecular Cations and Anions

Manipulating the collective molecular movements to implement macroscopic mechanical response of bulk material is attractive and challenging. Here, an organic-inorganic hybrid single crystal is synthesized, which exhibits a giant macroscopic shape transformation with a remarkable thermal hysteretic feature. The colossal anisotropic shape change, which manifests as an abrupt elongation of ca. 9 % along the crystallographic c-axis and a concomitant contraction of ca. 9 % in a perpendicular direction, is induced by a significant reorientation of imidazolium, accompanied with a substantial configurational variation in CuBr₄²⁻ complex anions. The synergistic motions of both the molecular cations and anions engender a remarkable large thermal hysteresis (>30 K) in the shape transformation of the single crystal, implying that this material may play a role in alternating memory media. Furthermore, due to the stable crystal lattice, a single crystal that demonstrates naked-eye detectable large shape transformation was used as a thermal actuator to spontaneously control an electric circuit by temperature variation.     

Hydrothermal synthesis of TiO2 nanorods: formation chemistry,growth mechanism,and tailoring of surface properties for photocatalytic activities

Titanium dioxide (TiO₂) is one of the best semiconductor photocatalysts with optical band gap of 3.2 eV. The optical band gap and photocatalytic properties could be further tuned by tailoring shape, size, composition, and morphology of the nanostructures. Hydrothermal synthesis methods have been applied to produce well-controlled nanostructured TiO₂ materials with different morphologies and improved optoelectronic properties. Among various morphologies, one-dimensional (1D) TiO₂ nanostructures are of great importance in the field of energy, environmental, and biomedical because of the directional transmission properties resulting from their 1D geometry. Particularly, TiO₂ nanorods (NRs) have gained special attention because of their densely packed structure, quantum confinement effect, high aspect ratio, and large specific surface area that could specially improve the directional charge transmission efficiency. This results in the effective photogenerated charge separation and light absorption, which are really important for potential applications of TiO₂-based materials for photocatalytic and other important applications. In this review, hydrothermal syntheses of TiO₂ NRs including the formation chemistry and the growth mechanism of NRs under different chemical environments and effects of various synthesis parameters (pH, reaction temperature, reaction time, precursors, solvents etc.) on morphology and optoelectronic properties have been discussed. Recent developments in the hydrothermal synthesis of TiO₂ NRs and tailoring of their surface properties through various modification strategies such as defect creation, doping, sensitization, surface coating, and heterojunction formation with various functional nanomaterials (plasmonic, oxide, quantum dots, graphene-based nanomaterials, etc.) have been reported to improve the photocatalytic activities. Furthermore, applications of TiO₂ NRs/tailored TiO₂ NRs as superior photocatalysts in degradation of organic pollutants and bacterial disinfection have been discussed with emphasis on mechanisms of action and recent advances in the fields.     

Synthesis of colloidal silica dumbbells

We describe the synthesis and characterization of stable suspensions of monodisperse fluorescently labeled silica dumbbell particles. Pure dispersions of silica dumbbells with center-to-center lengths from 174 nm to 2.3 microm were produced with a variety of aspect ratios. Individual particles in concentrated dispersions of these particles could be imaged with confocal microscopy. These particles can be used as a colloidal model system for addressing fundamental questions about crystal and glass formation of low-aspect-ratio anisotropic particles. They also have potential in photonic applications and electro-optical devices.