Quantification of eicosapentaenoic and docosahexaenoic acid geometrical isomers formed during fish oil deodorization by gas-liquid chromatography

Long-chain polyunsaturated fatty acids (LC-PUFAs) of the n-3 series and especially eicosapentaenoic and docosahexaenoic acids (EPA and DHA, respectively) have important biological properties. The main dietary sources of LC-PUFAs are fish and fish oil. Geometrical isomerization is one of the main reactions happening during the thermal treatment of polyunsaturated fatty acids. Refined fish oils are used to supplement food products in LC-PUFAs and the quality of these nutritional ingredients have to be controlled. In the present study, a suitable method for the quantification of EPA and DHA geometrical isomers in fish oils by gas-liquid chromatography (GC) is presented. A highly polar capillary column (CP-Sil 88, 100 m) operating under optimal conditions was used. Method selectivity was studied by GC-mass spectrometry. The performance characteristics of the quantification method were studied using samples of fish oil deodorized at 220 degrees C for 3 h. The linearity of the method was assessed by analyzing composite samples obtained by mixing fish oil deodorized at 220 degrees C with semi-refined fish oil (control). Precision was evaluated by analyzing the same samples in triplicate. Results showed that the validated method is suitable to quantify low amounts of geometrical (trans) isomers of EPA and DHA in refined fish oils. The limits of quantification of the EPA and DHA geometrical isomers are 0.16 and 0.56 g/100 g of fish oil, for EPA and DHA, respectively. Commercially available LC-PUFA oil samples were evaluated by using the validated method. The results show that the oils analyzed contain low amounts (<1% of total fatty acids) of geometrical isomers of EPA and DHA.     

深海鱼油中脂肪酸的分析

用氢氧化四甲胺／甲醇酯化法使深海鱼油内的三酸甘油酯中的脂肪酸和游离脂肪酸转化成脂肪酸甲酯,用气相色谱和气相色谱／质谱进行分析,鉴定出４１个组分,并对其中的主要组分顺式－５,８,１１,１４,１７－十二碳五稀酸（ＥＰＡ）和顺式－４,７,１０,１３,１６,１９－二十二碳六烯酸（ＤＨＡ）建立了定量分析方法。方法的相对标准偏差分别为４．３％（ＥＰＡ）和４．７％（ＤＨＡ）。ＥＰＡ和ＤＨＡ的回收率分别为１００．     

EPA甲酯和DHA甲酯标准样品的制备和结构解析

从鱼油中分离制备得到二十碳五烯酸（EPA）甲酯和二十二碳六烯酸（DHA）甲酯,采用红外光谱、质谱、核磁共振波谱等手段对EPA甲酯和DHA甲酯的结构进行表征,提供了不饱和脂肪酸甲酯标准物质研制基础。样品的红外光谱（IR）、质谱（MS）、核磁共振谱图（1HNMR、13CNMR）所给出的结构信息与EPA甲酯和DHA甲酯的化学结构式相符,并通过DEPT谱和I3C-1H COSY化学位移相关谱（HMBC）对各共振峰进行了指认,样品的谱图数据与文献报道基本一致。     

Fabrication of Phosphorus-Doped Cobalt Silicate with Improved Electrochemical Properties

The development of electrode materials for supercapacitors (SCs) is greatly desired, and this still poses an immense challenge for researchers. Cobalt silicate (Co₂SiO₄, denoted as CoSi) with a high theoretical capacity is deemed to be one of the sustainable electrode materials for SCs. However, its achieved electrochemical properties are still not satisfying. Herein, the phosphorus (P)-doped cobalt silicate, denoted as PCoSi, is synthesized by a calcining strategy. The PCoSi exhibits 1D nanobelts with a specific surface area of 46 m²∙g⁻¹, and it can significantly improve the electrochemical properties of CoSi. As a supercapacitor’s (SC’s) electrode, the specific capacitance of PCoSi attains 434 F∙g⁻¹ at 0.5 A∙g⁻¹, which is much higher than the value of CoSi (244 F∙g⁻¹ at 0.5 A∙g⁻¹). The synergy between the composition and structure endows PCoSi with attractive electrochemical properties. This work provides a novel strategy to improve the electrochemical performances of transition metal silicates.     

Synthesis of PNIPAAm-g-P4VP Microgel as Draw Agent in Forward Osmosis by RAFT Polymerization and Reverse Suspension Polymerization to Improve Water Flux

Microgels have unique and versatile properties allowing their use in forward osmosis areas as a draw agent. In this contribution, poly(4-vinylpyridine) (P4VP) was synthesized via RAFT polymerization and then grafted to a poly(N-Isopropylacrylamide) (PNIPAAm) crosslinking network by reverse suspension polymerization. P4VP was successfully obtained by the quasiliving polymerization with the result of nuclear magnetic resonance and gel permeation chromatography characterization. The particle size and particle size distribution of the PNIPAAm-g-P4VP microgels containing 0, 5, 10, 15 and 20 wt% P4VP were measured by means of a laser particle size analyzer. It was found that all the microgels were of micrometer scale and the particle size was increased with the P4VP load. Inter/intra-molecular-specific interactions, i.e., hydrogen bond interactions were then investigated by Fourier infrared spectroscopy. In addition, the water flux measurements showed that all the PNIPAAm-g-P4VP microgels can draw water more effectively than a blank PNIPAAm microgel. For the copolymer microgel incorporating 20 wt% P4VP, the water flux was measured to be 7.48 L∙m⁻²∙h⁻¹.     

毛细管气相色谱法测定深海鱼油中的EPA和DHA含量

用氢氧化钾－甲醇酯化法将深海鱼油中的脂肪酸快速、有效地转化成脂肪酸甲酯,然后进行毛细管气相色谱法测定,以二十二碳饱和脂肪酸甲酯为内标物,建立了5,8,11,14,17－二十碳五烯酸（EPA）和4,7,10,13,16,19－二十二碳六烯酸（DHA）的定量分析方法,并用于实际样品分析。该方法对EPA和DHA定量分析的相对标准偏差分别为4．6％和5．0％,回收率分别为99．7％和99．4％。     

In Vitro and In Vivo Digestibility of Soybean,Fish, and Microalgal Oils,and Their Influences on Fatty Acid Distribution in Tissue Lipid of Mice

The digestion rates of microalgal (docosahexaenoic acid, DHA, 56.8%; palmitic acid, 22.4%), fish (DHA, 10.8%; eicosapentaenoic acid, EPA, 16.2%), and soybean oils (oleic, 21.7%; linoleic acid, 54.6%) were compared by coupling the in vitro multi-step and in vivo apparent digestion models using mice. The in vitro digestion rate estimated based on the released free fatty acids content was remarkably higher in soybean and fish oils than in microalgal oil in 30 min; however, microalgal and fish oils had similar digestion rates at longer digestion. The in vivo digestibility of microalgal oil (91.49%) was lower than those of soybean (96.50%) and fish oils (96.99%). Among the constituent fatty acids of the diet oils, docosapentaenoic acid (DPA) exhibited the highest digestibility, followed by EPA, DHA, palmitoleic, oleic, palmitic, and stearic acid, demonstrating increased digestibility with reduced chain length and increased unsaturation degree of fatty acid. The diet oils affected the deposition of fatty acids in mouse tissues, and DHA concentrations were high in epididymal fat, liver, and brain of mice fed microalgal oil. In the present study, microalgal oil showed lower in vitro and in vivo digestibility, despite adequate DHA incorporation into major mouse organs, such as the brain and liver.     

Module-Designed Carbon-Coated Separators for High-Loading,High-Sulfur-Utilization Cathodes in Lithium–Sulfur Batteries

Lithium–sulfur batteries have great potential as next-generation energy-storage devices because of their high theoretical charge-storage capacity and the low cost of the sulfur cathode. To accelerate the development of lithium–sulfur technology, it is necessary to address the intrinsic material and extrinsic technological challenges brought about by the insulating active solid-state materials and the soluble active liquid-state materials. Herein, we report a systematic investigation of module-designed carbon-coated separators, where the carbon coating layer on the polypropylene membrane decreases the irreversible loss of dissolved polysulfides and increases the reaction kinetics of the high-loading sulfur cathode. Eight different conductive carbon coatings were considered to investigate how the materials’ characteristics contribute to the lithium–sulfur cell’s cathode performance. The cell with a nonporous-carbon-coated separator delivered an optimized peak capacity of 1112 mA∙h g⁻¹ at a cycling rate of C/10 and retained a high reversible capacity of 710 mA∙h g⁻¹ after 200 cycles under lean-electrolyte conditions. Moreover, we demonstrate the practical high specific capacity of the cathode and its commercial potential, achieving high sulfur loading and content of 4.0 mg cm⁻² and 70 wt%, respectively, and attaining high areal and gravimetric capacities of 4.45 mA∙h cm⁻² and 778 mA∙h g⁻¹, respectively.     

Herring Fish (Clupea harengus) Oil Production and Evaluation for Industrial Uses

It is a well known fact that the lipid (oil) extracted from various fish species can be of industrial benefit if properly extracted and processed. In this study herring fish oil was analyzed using quantitative and qualitative analysis in other to provide an assessment of the quality of the oil for industrial purposes. This work focuses on the production of oil from frozen herring fish (Clupea harengus) as the raw material readily available on the market, by evaluating by the oil using chemical and physical analysis and refining the oil by degumming, neutralizing, drying, and decolorizing. The experimental results revealed that the rate of extraction increases with time until maximum extraction took place using an average size of 780 µm. Every 10.64 g of dried sample used has about 4.34 g of oil extracted for five hours. The extracted herring fish oil contains two essential unsaturated fatty acids, eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), which could be of great industrial importance.     

Simultaneous quantification of total eicosapentaenoic acid,docosahexaenoic acid and arachidonic acid in plasma by high‐performance liquid chromatography–tandem mass spectrometry

A method for the simultaneous quantification of eicosapentaenoic acid (EPA), docosahexaenoic acid (DHA) and arachidonic acid (AA) in human plasma by HPLC–tandem mass spectrometry (HPLC‐MS/MS) was developed and validated. Free and esterified forms of fatty acids were hydrolysed from plasma samples in the presence of an internal standard and subjected to liquid–liquid extraction. The chromatographic run time was 3.5 min per sample. The assay was linear from 0.5 to 300 mg/L (r² > 0.997, n = 18). Based on matrix addition, accuracy deviation was <15%, except for AA at 10 mg/L (30–90%), whereas precision was <8% for all fatty acids studied. The method was applied to the measurement of these omega‐3 fatty acids in a fish oil supplement study with healthy volunteers. Healthy males (n = 4) were administered a supplement containing 465 mg EPA and 375 mg DHA per capsule (Omacor®). A dose of two capsules was given daily over a 4 week period. Pre‐treatment concentrations varied between subjects for EPA (17–68 mg/L), DHA (36–63 mg/L) and AA (121–248 mg/L). During the dosing period EPA increased 460–480% from the baseline concentration, while DHA increased 150–160%. The EPA–AA ratio increased from 0.07–0.56 to 0.3–3.1 after 4 weeks of dosing. In conclusion, the method described could be suitable for monitoring EPA, DHA and AA in clinical studies that may aid in achieving optimal concentrations of these fatty acids in patients who could be at risk of sudden cardiac death. Copyright © 2010 John Wiley & Sons, Ltd.     

Biocidal Activity of a Nanoemulsion Containing Essential Oil from Protium heptaphyllum Resin against Aedes aegypti (Diptera: Culicidae)

This work aimed to prepare a nanoemulsion containing the essential oil of the Protium heptaphyllum resin and evaluate its biocidal activities against the different stages of development of the Aedes aegypti mosquito. Ovicide, pupicide, adulticide and repellency assays were performed. The main constituents were p-cymene (27.70%) and α-pinene (22.31%). The developed nanoemulsion showed kinetic stability and monomodal distribution at a hydrophilic–lipophilic balance of 14 with a droplet size of 115.56 ± 1.68 nn and a zeta potential of −29.63 ± 3.46 mV. The nanoemulsion showed insecticidal action with LC₅₀ 0.404 µg·mL⁻¹ for the ovicidal effect. In the pupicidal test, at the concentration of 160 µg·mL⁻¹, 100% mortality was reached after 24 h. For adulticidal activity, a diagnostic concentration of 200 µg·mL⁻¹ (120 min) was determined. In the repellency test, a concentration of 200 µg·mL⁻¹ during the 180 min of the test showed a protection index of 77.67%. In conclusion, the nanobiotechnological product derived from the essential oil of P. heptaphyllum resin can be considered as a promising colloid that can be used to control infectious disease vectors through a wide range of possible modes of applications, probably as this bioactive delivery system may allow the optimal effect of the P. heptaphyllum terpenes in aqueous media and may also induce satisfactory delivery to air interfaces.     

Polish Varieties of Industrial Hemp and Their Utilisation in the Efficient Production of Lignocellulosic Ethanol

Nowadays, more and more attention is paid to the development and the intensification of the use of renewable energy sources. Hemp might be an alternative plant for bioenergy production. In this paper, four varieties of Polish industrial hemp (Białobrzeskie, Tygra, Henola, and Rajan) were investigated in order to determine which of them are the most advantageous raw materials for the effective production of bioethanol. At the beginning, physical and chemical pretreatment of hemp biomass was carried out. It was found that the most effective is the alkaline treatment with 2% NaOH, and the biomasses of the two varieties were selected for next stages of research: Tygra and Rajan. Hemp biomass before and after pretreatment was analyzed by FTIR and SEM, which confirmed the effectiveness of the pretreatment. Next, an enzymatic hydrolysis process was carried out on the previously selected parameters using the response surface methodology. Subsequently, the two approaches were analyzed: separated hydrolysis and fermentation (SHF) and a simultaneous saccharification and fermentation (SSF) process. For Tygra biomass in the SHF process, the ethanol concentration was 10.5 g∙L⁻¹ (3.04 m³·ha⁻¹), and for Rajan biomass at the SSF process, the ethanol concentration was 7.5 g∙L⁻¹ (2.23 m³·ha⁻¹). In conclusion, the biomass of Polish varieties of hemp, i.e., Tygra and Rajan, was found to be an interesting and promising raw material for bioethanol production.     

高效液相色谱法分离制备鱼油中的EPA和DHA

采用反相高效液相色谱技术,以μ－ＢｏｎｄａｐａｋＣ１８作固定相,ＣＨ３ＯＨ／ＴＨＦ／Ｈ２Ｏ作流动相,对鱼同中的二十碳五烯酸（ＥＰＡ）和二十二碳六烯酸（ＤＨＡ）进行了分离纯化,制备溶液经减压蒸馏,乙酸乙酯萃取后所得ＥＰＡ和ＤＨＡ质量分数可分别达到９８％和８６％以上。     

The Biological Activity of Monarda didyma L. Essential Oil and Its Effect as a Diet Supplement in Mice and Broiler Chicken

The use of growth-promoting antibiotics in livestock faces increasing scrutiny and opposition due to concerns about the increased occurrence of antibiotic-resistant bacteria. Alternative solutions are being sought, and plants of Lamiaceae may provide an alternative to synthetic antibiotics in animal nutrition. In this study, we extracted essential oil from Monarda didyma, a member of the Lamiaceae family. We examined the chemical composition of the essential oil and then evaluated the antibacterial, antioxidant, and anti-inflammatory activities of M. didyma essential oil and its main compounds in vitro. We then evaluated the effectiveness of M. didyma essential oil in regard to growth performance, feed efficiency, and mortality in both mice and broilers. Carvacrol (49.03%) was the dominant compound in the essential oil extracts. M. didyma essential oil demonstrated antibacterial properties against Escherichia coli (MIC = 87 µg·mL⁻¹), Staphylococcus aureus (MIC = 47 µg·mL⁻¹), and Clostridium perfringens (MIC = 35 µg·mL⁻¹). Supplementing the diet of mice with essential oil at a concentration of 0.1% significantly increased body weight (+5.4%) and feed efficiency (+18.85%). In broilers, M. didyma essential oil significantly improved body weight gain (2.64%). Our results suggest that adding M. didyma essential oil to the diet of broilers offers a potential substitute for antibiotic growth promoters.     

From Fish Waste to Value: An Overview of the Sustainable Recovery of Omega-3 for Food Supplements

The disposal of food waste is a current and pressing issue, urging novel solutions to implement sustainable waste management practices. Fish leftovers and their processing byproducts represent a significant portion of the original fish, and their disposal has a high environmental and economic impact. The utilization of waste as raw materials for the production of different classes of biofuels and high-value chemicals, a concept known as “biorefinery”, is gaining interest in a vision of circular economy and zero waste policies. In this context, an interesting route of valorization is the extraction of omega-3 fatty acids (ω-3 FAs) for nutraceutical application. These fatty acids, such as eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) have received attention over the last decades due to their beneficial effects on human health. Their sustainable production is a key process for matching the increased market demand while reducing the pressure on marine ecosystems and lowering the impact of waste production. The high resale value of the products makes this waste a powerful tool that simultaneously protects the environment and benefits the global economy. This review aims to provide a complete overview of the sustainable exploitation of fish waste to recover ω-3 FAs for food supplement applications, covering composition, storage, and processing of the raw material.     

Analysis of polyunsaturated fatty acids in blood serum after fish oil administration.

Free and total fatty acids in the blood serum of patients with hyperlipoproteinemia have been analysed as their methyl esters by capillary gas chromatography using an FFAP column. In one-step reactions the free fatty acids in serum react with methanol-acetyl chloride (50:1, v/v) at 25 degrees C, the total fatty acids (free plus esterified) are transesterified with methanol-toluene-acetyl chloride (8:2:1, v/v) at 100 degrees C. The quantification of eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) is based on an internal standard (13,16,19-docosatrienoic acid) and on calibration standards. Under normal diet the concentrations of EPA and DHA are as follows (mean +/- S.D., n = 27): free EPA, 0.2 +/- 0.1 mg/dl; free DHA, 0.6 +/- 0.2 mg/dl; total EPA, 3.6 +/- 2.1 mg/dl; total DHA 11.4 +/- 3.1 mg/dl. Under a fish oil intake of 9 g per day, free and total EPA concentrations rise by ca. five- to six-fold, and free and total DHA concentrations by ca. two-fold.     

Larvicide Activity on Aedes aegypti of Essential Oil Nanoemulsion from the Protium heptaphyllum Resin

The aim of this work was to prepare a nanoemulsion containing the essential oil of Protium heptaphyllum resin and to evaluate the larvicidal activity and the residual larvicidal effect against Aedes aegypti. The essential oil was identified by gas chromatography coupled to a mass spectrometer, and the nanoemulsions were prepared using a low-energy method and characterized by photon correlation spectroscopy. The results indicated the major constituents as p-cimene (27.70%) and α-Pinene (22.31%). Nanoemulsions had kinetic stability and a monomodal distribution in a hydrophilic-lipophilic balance of 14 with particle diameters of 115.56 ± 1.68 nn and zeta potential of −29.63 ± 3.46 mV. The nanoemulsion showed larvicidal action with LC₅₀ = 2.91 µg∙mL⁻¹ and residual larvicidal effect for 72 h after application to A. aegypti larvae. Consequently, the nanobiotechnological product derived from the essential oil of P. heptaphyllum resin could be used against infectious disease vectors.     

Single-Step Hydrothermal Synthesis of Biochar from H3PO4-Activated Lettuce Waste for Efficient Adsorption of Cd(II) in Aqueous Solution

Developing an ideal and cheap adsorbent for adsorbing heavy metals from aqueous solution has been urgently need. In this study, a novel, effective and low-cost method was developed to prepare the biochar from lettuce waste with H₃PO₄ as an acidic activation agent at a low-temperature (circa 200 °C) hydrothermal carbonization process. A batch adsorption experiment demonstrated that the biochar reaches the adsorption equilibrium within 30 min, and the optimal adsorption capacity of Cd(II) is 195.8 mg∙g⁻¹ at solution pH 6.0, which is significantly improved from circa 20.5 mg∙g⁻¹ of the original biochar without activator. The fitting results of the prepared biochar adsorption data conform to the pseudo-second-order kinetic model (PSO) and the Sips isotherm model, and the Cd(II) adsorption is a spontaneous and exothermic process. The hypothetical adsorption mechanism is mainly composed of ion exchange, electrostatic attraction, and surface complexation. This work offers a novel and low-temperature strategy to produce cheap and promising carbon-based adsorbents from organic vegetation wastes for removing heavy metals in aquatic environment efficiently.     

Bioprospecting of Coralline Red Alga Amphiroa rigida J.V. Lamouroux: Volatiles,Fatty Acids and Pigments

Due to the lack of phytochemical composition data, the major goals of the present study on Amphiroa rigida J.V. Lamouroux were to: (a) investigate and compare volatilome profiles of fresh and air-dried samples obtained by headspace solid-phase microextraction (HS-SPME) and hydrodistillation (HD) followed by gas chromatography and mass spectrometry (GC/MS) analysis; (b) determine fatty acids profile by gas chromatography with flame ionization detector (GC-FID); (c) obtain the pigment profiles of semipurified extracts by high performance liquid chromatography (HPLC) and (d) evaluate the antioxidant and antimicrobial activities of its less polar fractions. The comparison of headspace of fresh (FrAr) and air-dried (DrAr) samples revealed many similarities regarding the presence and abundance of the major (heptadecane and pentadecane) and minor compounds. The hydrodistillate (HD) of DrAr profile was quite different in comparison to HD-FrAr. The predominant compound in HD-FrAr was (E)-phytol. In HD-DrAr, its percentage was approximately one-half reduced, but the abundance of its degradation product phytone and of unsaturated and oxygenated compounds increased indicating more intense fatty acid decomposition and oxidation during drying. The fatty acid determination revealed that the most dominant was palmitic acid (42.86%) followed by eicosapentaenoic acid (19.14%) and stearic acid (11.65%). Among the pigments, A. rigida contained fucoxanthin (0.63 mg g⁻¹ of dry fraction), lutein (5.83 mg g⁻¹), β-carotene (6.18 mg g⁻¹) and chlorophyll a (13.65 mg g⁻¹). The analyzed less polar fractions of A. rigida exhibited antioxidant scavenging activity with diammonium salt of 2,2′-azino-bis (3-ethylbenzthiazolin-6-yl) sulfonic acid (ABTS) assay up to 3.87 mg g⁻¹ trolox equivalents (TE), and with the oxygen radical absorbance capacity (ORAC) assay up to 825.63 μmol g⁻¹ TE (with carotenoids as the major contributors).     

Preparation of a Crosslinked Bioimprinted Lipase for Enrichment of Polyunsaturated Fatty Acids from Fish Processing Waste

Geotrichum sp. lipase modified with a combined method composed of crosslinking and bioimprinting was employed to selectively hydrolyze waste fish oil for enrichment of eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) in glycerides. Crosslinked polymerization by monomer (polyethylene glycol 400 dimethyl acrylate), crosslinker (trimethylolpropane trimethylacrylate), and photoinitiator (benzoin methyl ether) coupled to bioimprinting using palmitic acid as imprint molecule, resulted in much more effective enzyme preparation used in aqueous hydrolysis reaction. Since the crosslinked polymerization modification maintained bioimprinted property and gave good dispersion of enzyme in reaction mixture, the crosslinked bioimprinted enzyme exhibited higher hydrolysis temperature, enhanced specific activity, shorter hydrolysis time, and better operational stability compared to free lipase. Crude fish oil was treated at 45 °C with this crosslinked bioimprinted lipase for 8 h, and 46% hydrolysis degree resulted in the production of glycerides containing 41% of EPA and DHA (EPA+DHA), achieving 85.7% recovery of initial EPA and DHA. The results suggested that bioimprinted enzymes did not lose their induced property in aqueous environment when prepared according to the described crosslinking–bioimprinting method. It could also be seen that the crosslinked bioimprinted lipase was effective in producing glycerides that contained a higher concentration of polyunsaturated fatty acid with better yield.