Spectrophotometric and colorimetric determination of gallium (III) with p-aminohippuric acid-functionalized citrate capped gold nanoparticles

A new technique for sensing Ga(III) concentration based on polyvinyl alcohol-citrate capped gold nanoparticle– p- aminohippuric acid hybrid (or three-layer core-shell configurations) has been demonstrated. The p- aminohippuric acid capped citrate-gold nanoparticles were comfortably agglomerated in the presence of Ga(III), and the color of the reaction quickly turned from red to violet or blue. Under the detection conditions, a good linear relationship was ideally obtained between the ratio of the absorbance intensity at 620 nm to that at 520 nm (A₆₂₀/A₅₂₀). The linear response range, the detection, and quantification limit was 34.9–418.3 μg/L and 7.6 μg/L, and 25 μg/L, respectively. To reflect the accuracy, the developed sensing approach was evaluated against certified reference materials (TMDA 51.3 fortified water and TMDA 28.3 fortified water). This colorimetric strategy was displayed excellent selectivity for Ga(III) over other examined ions. Additionally, the colorimetric method was properly used to detect the concentrations of Ga in tap water and certified reference material samples with recoveries ranging from 95.4 to 102.0%, displaying that the colorimetric procedure could be safely used for a realistic application.     

Chromatographic Determination of Total Selenium in Biofortified Allium sp. following Piazselenol Formation and Micro-Solid-Phase Extraction

Herein, a method based on selective piazselenol formation is applied for total selenium determination in biofortified Allium species. Piazselenol is formed by reacting Se(IV) with an aromatic diamine, namely 4-nitro-1,2-phenylenediamine, in acidic medium. Samples were digested in a nitric acid/hydrogen peroxide open system, followed by selenate reduction in hydrochloric acid. Reaction conditions were optimized in terms of pH, temperature, reaction time, and other auxiliary reagents for interference removal, namely, EDTA and hydroxylamine. For the extraction of the selectively formed 4-nitro-piazselenol, micro-solid-phase extraction (μSPE) was applied, and the analysis and detection of the corresponding complex was performed by HPLC coupled with DAD. An external standard calibration curve was developed (R² = 0.9994) with good sensitivity, and was used to calculate the total selenium content from several Allium plants material, with good intermediate precision (RSD% < 16%). The accuracy of the method was evaluated using both, a comparison with an accepted reference method from our previously published data, as well as three certified reference material with recoveries between 84–126%. The limit of detection was determined to be 0.35 μg/g (in solids) and 1.1 μg/L (in solution), while the limit of quantification was 1.07 μg/g and 3.4 μg/L (in solution). Using the proposed method, selenium content can be quickly and accurately determined in several types of samples. In addition, this study present experimental conditions for overcoming the interferences that might be encountered in selenium determination using piazselenol.     

Investigation on Distribution and Risk Assessment of Volatile Organic Compounds in Surface Water,Sediment, and Soil in a Chemical Industrial Park and Adjacent Area

The occurrences, distributions, and risks of 55 target volatile organic compounds (VOCs) in water, sediment, sludge, and soil samples taken from a chemical industrial park and the adjacent area were investigated in this study. The Σ₅₅-VOCs concentrations in the water, sediment, sludge, and soil samples were 1.22–5449.21 μg L⁻¹, ND–52.20 ng g⁻¹, 21.53 ng g⁻¹, and ND–11.58 ng g⁻¹, respectively. The main products in this park are medicines, pesticides, and novel materials. As for the species of VOCs, aromatic hydrocarbons were the dominant VOCs in the soil samples, whereas halogenated aliphatic hydrocarbons were the dominant VOCs in the water samples. The VOCs concentrations in water samples collected at different locations varied by 1–3 orders of magnitude, and the average concentration in river water inside the park was obviously higher than that in river water outside the park. However, the risk quotients for most of the VOCs indicated a low risk to the relevant, sensitive aquatic organisms in the river water. The average VOCs concentration in soil from the park was slightly higher than that from the adjacent area. This result showed that the chemical industrial park had a limited impact on the surrounding soil, while the use of pesticides, incomplete combustion of coal and biomass, and automobile exhaust emissions are all potential sources of the VOCs in the environmental soil. The results of this study could be used to evaluate the effects of VOCs emitted from chemical production and transportation in the park on the surrounding environment.     

Simultaneous Determination of Sulfonamides Antibiotics in Environmental Water and Seafood Samples Using Ultrasonic-Assisted Dispersive Liquid-Liquid Microextraction Coupled with High Performance Liquid Chromatography

The residues and abuse of antibiotics have seriously endangered ecological balance and human health; meanwhile, antibiotics determination is very difficult because of their low levels and multiple categories in complicated matrices. Appropriate sample pretreatment is usually imperative to enrich (ultra)trace antibiotics and eliminate matrix interference prior to chromatographic analysis. Dispersive liquid-liquid microextraction (DLLME) has become an ideal pretreatment technique owing to its simplicity, effectiveness, low-consumption, etc. In this work, an ultrasonic-assisted DLLME (UA-DLLME) was developed for the simultaneous extraction of seven sulfonamides (SAs) antibiotics in environmental water and seafood samples coupled with HPLC-DAD determination. Several parameters affecting UA-DLLME efficiency were systematically optimized, and consequently the SAs were separated and detected within 14.5 min. The obtained limits of detection (LODs) and limits of quantification (LOQs) ranged from 0.7–7.8 μg/L and 2.4–26.0 μg/L for three water samples (seawater, aquaculture wastewater and lake water) and two seafood samples (pomfrets and shrimps). High recoveries (80.0–116.0%) with low relative standard deviations (0.1–8.1%) were achieved for all the tested samples at three spiked levels. Notably, sulfadimethoxine was found at 24.49 μg/L in one seawater sample. The facile, robust and benign DLLME-HPLC method demonstrated promising perspectives for multiresidue analysis of antibiotics.     

Biocompatible Ir(III) Complexes as Oxygen Sensors for Phosphorescence Lifetime Imaging

Synthesis of biocompatible near infrared phosphorescent complexes and their application in bioimaging as triplet oxygen sensors in live systems are still challenging areas of organometallic chemistry. We have designed and synthetized four novel iridium [Ir(N^C)₂(N^N)]⁺ complexes (N^C–benzothienyl-phenanthridine based cyclometalated ligand; N^N–pyridin-phenanthroimidazol diimine chelate), decorated with oligo(ethylene glycol) groups to impart these emitters’ solubility in aqueous media, biocompatibility, and to shield them from interaction with bio-environment. These substances were fully characterized using NMR spectroscopy and ESI mass-spectrometry. The complexes exhibited excitation close to the biological “window of transparency”, NIR emission at 730 nm, and quantum yields up to 12% in water. The compounds with higher degree of the chromophore shielding possess low toxicity, bleaching stability, absence of sensitivity to variations of pH, serum, and complex concentrations. The properties of these probes as oxygen sensors for biological systems have been studied by using phosphorescence lifetime imaging experiments in different cell cultures. The results showed essential lifetime response onto variations in oxygen concentration (2.0–2.3 μs under normoxia and 2.8–3.0 μs under hypoxia conditions) in complete agreement with the calibration curves obtained “in cuvette”. The data obtained indicate that these emitters can be used as semi-quantitative oxygen sensors in biological systems.     

气相色谱-负化学源质谱法测定船舶压载水中4种三卤甲烷北大核心CSCD

我国每年的船舶压载水排放量巨大,压载水中含有浮游生物、病原体及其幼虫或孢子等,若处理不当,会对排放水域的生态环境造成严重影响。排放压载水前常使用电解法对其进行处理,电解产生的次氯酸钠溶液,能有效杀灭残余的微生物。但电解后会产生副产物三卤甲烷(THMs),其对人体有一定的健康风险,建立船舶压载水中三卤甲烷的测定方法具有重要意义。该研究建立了采用气相色谱-负化学源质谱(GC-NCI-MS)测定船舶压载水中4种三卤甲烷(包括三氯甲烷、二氯一溴甲烷、一氯二溴甲烷、三溴甲烷)的分析方法。船舶压载水样品经过顶空进样技术处理后,通过DB-5MS UI毛细管色谱柱(30 m×0.25 mm×1.0μm)分离,气相色谱-负化学源质谱仪测定,在选择离子扫描(SIM)模式下分析,采用外标法进行定量。4种三卤甲烷在0.2~50μg/L范围内线性关系良好,相关系数(r)≥0.995,定量限(S/N=10)为0.1~0.2μg/L,在0.2、0.5、2.0μg/L 3个加标水平下,4种THMs的平均回收率为90.3%~106.8%,相对标准偏差(RSD)为1.4%~6.2%。该方法准确、稳定、可靠,可用于测定船舶压载水中4种THMs的含量。使用建立的测定方法对36个船舶压载水进行测定,三溴甲烷、二溴一氯甲烷、一溴二氯甲烷与三氯甲烷的检出率分别为83.3%、69.4%、22.2%和19.4%,检出值分别为34.25~221.5μg/L、3.52~41.87μg/L、1.52~8.56μg/L和0.02~5.46μg/L。     

Analysis of a “3-(Naphthalen-1-ylimino)indolin-2-one” Compound and Its Antimicrobial Assessment Using Lipid-Based Self-Nanoemulsifying Formulations

In recent years, indole derivatives have acquired conspicuous significance due to their wide spectrum of biological activities—antibacterial, antiviral, and anticonvulsant. This compound is derived from naturally grown plants. Therefore, synthesis of a novel “3-(Naphthalen-1-ylimino)indolin-2-one” compound (2) and its analysis using UPLC systems along with antimicrobial assessment was the aim of the current study. Isatin was used as a parent drug for synthesizing compound (2). Liquid Chromatographic analysis was performed using a C18 BEH column (1.7 μm 2.1 × 50 mm) by UPLC systems. Degradation studies were carried out to see whether acid, base, thermal, and oxidizing agents had any impact on the synthesized molecule in stress conditions (100 °C). A lipid-based self-nanoemulsifying formulation was developed and selectivity, specificity, recovery, accuracy, and precision were measured as part of the UPLC system’s validation process. Antimicrobial studies were conducted using gram-positive and gram-negative bacteria. The standard samples were run with a concentration range of 5.0–100.0 μg/mL using the isocratic mobile phase comprising of methanol/water (70/30 %v/v) at 234 nm; good linearity (R² = 0.9998) was found. The lower limits of detection (LOD) and quantitation (LOQ) of the method were found to be 0.81 μg/mL and 2.5 μg/mL, respectively. The coefficients of variation were found to be less than 2%. The antimicrobial study suggests that compound (2) has a substantial growth effect against gram-negative bacteria. It was successfully synthesized and applied to measure the concentrations in lipid-based dosage form, along with potent antimicrobial activities.     

高通量固相萃取-超高效液相色谱-串联质谱法测定人尿中8种环境酚类内分泌干扰物

建立了人尿中8种环境酚类化合物的96孔板固相萃取-超高效液相色谱-串联质谱(96-well SPE LC-MS/MS)检测方法,其中包括7种双酚类化合物和三氯生。尿样解冻到室温,经β-葡萄糖醛酸苷肽酶/芳基磺酸酯酶37 ℃过夜酶解。实验比较了3种96孔板固相萃取柱和不同淋洗条件对人尿样的净化效果和目标化合物的回收率。结果显示,采用Oasis HLB 96孔板(60 mg)对样品进行萃取和用30%(v/v)乙腈水溶液进行淋洗净化的纯化效果最好。纯化后目标物用甲醇溶液洗脱,经氮气吹干,用0.5 mL甲醇-水(1∶1, v/v)溶液定容,目标化合物用UPLC-MS/MS进行检测。比较了2种分析柱(C₁₈和T3分析柱)以及不同的有机流动相对分离样品中目标物的影响。结果显示,以BEH C₁₈(100 mm×2.1 mm, 1.7 μm)作为分析柱,乙腈/水作为流动相,以流速0.3 mL/min梯度洗脱时,目标物的分离效果最好。质谱条件选择串联质谱负离子电喷雾(ESI^-)多反应监测模式(MRM)进行检测。对样品的基质效应进行评估发现,双酚A、双酚F、双酚S、双酚B和双酚AF的绝对基质效应为3.47%~15.32%,不需要补偿措施;四氯双酚A、四溴双酚A和三氯生的绝对基质效应分别是49.58%(中等基质效应)、71.99%和86.93%(强基质效应),均需要补偿效应。因此,该方法采用了一一对应的同位素内标法抵消基质效应。用6份实际尿样基质评估相对基质效应,8种内标的峰面积的相对标准偏差为3.63%~9.06%,说明相对基质效应稳定。在优化条件下,双酚A和双酚AF在0.50~50 μg/L内、四氯双酚A和双酚S在0.05~50 μg/L内、双酚F和四溴双酚A在0.01~50 μg/L内、双酚B在1.00~50 μg/L内、三氯生在5.00~200 μg/L内线性关系良好,相关系数大于0.9995。方法检出限为0.002~1.09 μg/L,定量限为0.007~3.63 μg/L。3个加标水平的加标回收率为81.0%~101.9%,日内精密度为0.4%~19.4%,日间精密度为2.5%~17.8%。应用该方法对2019-2020年采集的北京地区64份尿样进行测定,结果发现8种目标分析物中,除双酚B和双酚AF未检出外,其余均有检出,其中双酚A和双酚S的检出率最高,分别为100%和96.9%。三氯生、四溴双酚A、四氯双酚A和双酚F的检出率分别为57.8%、46.9%、23.4%和21.9%。尿样中8种目标物含量的中位值以降序排列分别为1.44 μg/L(三氯生)、0.69 μg/L(双酚A)、0.086 μg/L(双酚S)、0.0032 μg/L(四溴双酚A)、0.00050 μg/L (四氯双酚A)、0.00 μg/L(双酚F、双酚B和双酚AF)。以上尿样检测结果显示,北京市居民存在普遍的环境酚类化合物暴露,值得关注。该方法操作简单,定量准确,样品需求量小,有机试剂消耗少,适合大批量样本的测定。     

Flow Injection Semi-online Sorbent Extraction Preconcentration for Graphite Furnace Atomic Absorption Spectrometry

A micro-flow injection sorbent extraction preconcentration system was combined with a graphite furnace atomic absorption spectrometer. The combination results in an integrated system for the determination of trace amounts of heavy metals. Silica bonded with octadecyl functional groups (C₁₈) was used as a sorbent in a 15-μL conical microcolumn. The metals to be determined were preconcentrated as diethyl dithiocarbamate chelates onto the column for 60 s and then rinsed with deionized water and eluted with 40 μL of ethanol. Compared with direct injection of 40 μL of aqueous sample solution, enrichment factors of 30, 32, and 29 and detection limits (3ς) of 7.8, 12.8, and 3.9 ng/L for cobalt, nickel, and lead, respectively, were obtained with 60-s sample loading at 3.0 mL/min for sorbent extraction, 40 μL of eluate injection, and peak area measurement. The results obtained for trace amounts of cobalt, nickel, and lead in reference materials showed that there were no significant differences between the certified and determined values.     

Design and Functionalization of a µPAD for the Enzymatic Determination of Nitrate in Urine

In this work, the design of a microfluidic paper-based analytical device (μPAD) for the quantification of nitrate in urine samples was described. Nitrate monitoring is highly relevant due to its association to some diseases and health conditions. The nitrate determination was achieved by combining the selectivity of the nitrate reductase enzymatic reaction with the colorimetric detection of nitrite by the well-known Griess reagent. For the optimization of the nitrate determination μPAD, several variables associated with the design and construction of the device were studied. Furthermore, the interference of the urine matrix was evaluated, and stability studies were performed, under different conditions. The developed μPAD enabled us to obtain a limit of detection of 0.04 mM, a limit of quantification of 0.14 mM and a dynamic concentration range of 0.14–1.0 mM. The designed μPAD proved to be stable for 24 h when stored at room temperature in air or vacuum atmosphere, and 60 days when stored in vacuum at −20 °C. The accuracy of the nitrate μPAD measurements was confirmed by analyzing four certified samples (prepared in synthetic urine) and performing recovery studies using urine samples.     

Six New Phenylpropanoid Derivatives from Chemically Converted Extract of Alpinia galanga (L.) and Their Antiparasitic Activities

Chemical conversion of the extract of natural resources is a very attractive way to expand the chemical space to discover bioactive compounds. In order to search for new medicines to treat parasitic diseases that cause high morbidity and mortality in affected countries in the world, the ethyl acetate extract from the rhizome of Alpinia galanga (L.) has been chemically converted by epoxidation using dioxirane generated in situ. The biological activity of chemically converted extract (CCE) of A. galanga (L.) significantly increased the activity against Leishmania major up to 82.6 ± 6.2 % at 25 μg/mL (whereas 2.7 ± 0.8% for the original extract). By bioassay-guided fractionation, new phenylpropanoids (1–6) and four known compounds, hydroquinone (7), 4-hydroxy(4-hydroxyphenyl)methoxy)benzaldehyde (8), isocoumarin cis 4-hydroxymelein (9), and (2S,3S,6R,7R,9S,10S)-humulene triepoxide (10) were isolated from CCE. The structures of isolated compounds were determined by spectroscopic analyses of 1D and 2D NMR, IR, and MS spectra. The most active compound was hydroquinone (7) with IC₅₀ = 0.37 ± 1.37 μg/mL as a substantial active principle of CCE. In addition, the new phenylpropanoid 2 (IC₅₀ = 27.8 ± 0.34 μg/mL) also showed significant activity against L. major compared to the positive control miltefosine (IC₅₀ = 7.47 ± 0.3 μg/mL). The activities of the isolated compounds were also evaluated against Plasmodium falciparum, Trypanosoma brucei gambisense and Trypanosoma brucei rhodeisense. Interestingly, compound 2 was selectively active against trypanosomes with potent activity. To the best of our knowledge, this is the first report on the bioactive “unnatural” natural products from the crude extract of A. galanga (L.) by chemical conversion and on its activities against causal pathogens of leishmaniasis, trypanosomiasis, and malaria.     

Liquid Chromatography-Tandem Mass Spectrometry for the Simultaneous Analysis of 353 Pesticides in the Edible Insect Tenebrio molitor Larvae (Mealworms)

Tenebrio molitor larvae (mealworm) is an edible insect and is considered a future food. Using liquid chromatography-tandem mass spectrometry (LC-MS/MS), a novel method for simultaneous analysis of 353 target analytes was developed and validated. Various sample preparation steps including “quick, easy, cheap, effective, rugged, and safe” (QuEChERS) extraction conditions, number of acetonitrile-hexane partitions, and dispersive-solid phase extraction (dSPE) sorbents were compared, and the optimal conditions were determined. In the established method, 5 g of homogenized mealworms was extracted with acetonitrile and treated with QuEChERS EN 15662 salts. The crude extract was subjected to three rounds of acetonitrile-hexane partitioning, and the acetonitrile layer was cleaned with C18 dSPE. The final solution was matrix-matched and injected into LC-MS/MS (2 μL). For target analytes, the limits of quantitation (LOQs) were ≤10 μg/kg, and the correlation coefficient (r²) of calibration was >0.990. In recovery tests, more than 90% of the pesticides showed an excellent recovery range (70–120%) with relative standard deviation (RSD) ≤20%. For more than 94% of pesticides, a negligible matrix effect (within ±20%) was observed. The analytical method was successfully applied and used for the detection of three urea pesticides in 4 of 11 mealworm samples.     

Rocket (Eruca vesicaria (L.) Cav.) vs. Copper: The Dose Makes the Poison?

The effects of copper addition, from various adsorbents, on the accumulation ability and glucosinolate content of cultivated rocket were studied. Different adsorbents (zeolite NaX, egg shells, substrate, fly ash) were treated with copper(II) solution with an adsorption efficiency of 98.36, 96.67, 51.82 and 39.13%, respectively. The lowest copper content and the highest total glucosinolate content (44.37 μg/g DW and 4269.31 µg/g DW, respectively) were detected in the rocket grown in the substrate with the addition of a substrate spiked with copper(II) ions. Rocket grown in the fly ash-substrate mixture showed an increase in copper content (84.98 μg/g DW) and the lowest total glucosinolate content (2545.71 µg/g DW). On the other hand, when using the egg shells-substrate mixture, the rocket copper content increased (113.34 μg/g DW) along with the total GSLs content (3780.03 µg/g DW), indicating the influence of an adsorbent type in addition to the copper uptake. The highest copper content of 498.56 μg/g DW was detected in the rocket watered with copper(II) solution with a notable decrease in the glucosinolate content, i.e., 2699.29 µg/g DW. According to these results rocket can be considered as a copper accumulator plant.     

Ethanol/water solutions as certified reference materials for breath alcohol analyzer calibration

The Federal Institute for Materials Research and Testing (BAM), Germany, has issued a series of large volume ethanol in water certified reference materials (CRMs), primarily developed for the calibration of evidential breath alcohol analyzers in Germany. The certified parameter is the ethanol mass concentration at 20 °C. When used in a wet bath simulator, the solutions deliver gas samples that meet the requirements set by the Organization of Legal Metrology for calibration of breathalyzers. The materials were prepared gravimetrically by spiking of ethanol into water in single 5 L units. A complete uncertainty budget for the preparation process has been established. The purity of the commercial ethanol stock solution was identified to be the main source of uncertainty. For stability and homogeneity measurements and for the verification of the gravimetric mass concentration of the CRMs, a robust high-precision gas chromatography, with flame-ionization detection method for ethanol determination in aqueous samples was developed and validated. The good performance of this method has been demonstrated in several international comparisons organized by the Consultative Committee for Amount of Substance—Metrology in Chemistry at the International Bureau of Weights and Measures.     

聚多巴胺涂敷的聚酰胺-胺功能化二氧化硅复合材料用于水样中苯甲酰脲类杀虫剂的分散微固相萃取北大核心CSCD

近年来,由农药残留导致的环境污染问题已引起社会的广泛关注,开发便捷高效的分析方法对农药残留进行检测和监测十分必要。研究设计并成功制备了聚多巴胺涂敷的聚酰胺-胺树状分子功能化的二氧化硅复合材料(SiO-PAMAM-PDA),并采用透射电镜对其进行表征。开发了以此复合材料为吸附剂的分散微固相萃取方法(D-μ-SPE),并结合高效液相色谱对水基质中的4种苯甲酰脲类杀虫剂(BUs)残留进行了富集检测。多巴胺结构中含有丰富的苯环、氨基及羟基,可与目标物形成氢键、π-π相互作用,从而增强了材料对苯甲酰脲的萃取能力。对吸附剂用量、萃取时间等可能影响萃取效率的条件进行了单因素优化。在最优条件下,该方法的线性范围在10~500μg/L之间,根据3倍信噪比(S/N)计算所得的检出限(LOD)为1.1~2.1μg/L,回收率为82.8%~94.1%,相对标准偏差(RSD)为2.1%~8.0%。将建立的方法与已报道的以苯甲酰脲作为目标物的方法进行了对比,发现方法样品用量及萃取剂用量均较少,且所需前处理时间较短,有机溶剂消耗也较少,为苯甲酰脲类农药的检测提供了更快速、绿色的选择。为评估所开发方法的实际样品适用性,将其应用于3种河水样品中4种苯甲酰脲类杀虫剂的分析检测,所得回收率及RSD分别为69.5%~99.4%和0.2%~9.5%,表明此方法在实际样品中同样具有较高的准确性和精密度。     

Utilizing the DNA Aptamer to Determine Lethal α-Amanitin in Mushroom Samples and Urine by Magnetic Bead-ELISA (MELISA)

Amanita poisoning is one of the most deadly types of mushroom poisoning. α-Amanitin is the main lethal toxin in amanita, and the human-lethal dose is about 0.1 mg/kg. Most of the commonly used detection techniques for α-amanitin require expensive instruments. In this study, the α-amanitin aptamer was selected as the research object, and the stem-loop structure of the original aptamer was not damaged by truncating the redundant bases, in order to improve the affinity and specificity of the aptamer. The specificity and affinity of the truncated aptamers were determined using isothermal titration calorimetry (ITC) and gold nanoparticles (AuNPs), and the affinity and specificity of the aptamers decreased after truncation. Therefore, the original aptamer was selected to establish a simple and specific magnetic bead-based enzyme linked immunoassay (MELISA) method for α-amanitin. The detection limit was 0.369 μg/mL, while, in mushroom it was 0.372 μg/mL and in urine 0.337 μg/mL. Recovery studies were performed by spiking urine and mushroom samples with α-amanitin, and these confirmed the desirable accuracy and practical applicability of our method. The α-amanitin and aptamer recognition sites and binding pockets were investigated in an in vitro molecular docking environment, and the main binding bases of both were T3, G4, C5, T6, T7, C67, and A68. This study truncated the α-amanitin aptamer and proposes a method of detecting α-amanitin.     

Multi-Element Analysis Based on an Automated On-Line Microcolumn Separation/Preconcentration System Using a Novel Sol-Gel Thiocyanatopropyl-Functionalized Silica Sorbent Prior to ICP-AES for Environmental Water Samples

A sol-gel thiocyanatopropyl-functionalized silica sorbent was synthesized and employed for an automated on-line microcolumn preconcentration platform as a front-end to inductively coupled plasma atomic emission spectroscopy (ICP-AES) for the simultaneous determination of Cd(II), Pb(II), Cu(II), Cr(III), Co(II), Ni(II), Zn(II), Mn(II), Hg(II), and V(II). The developed system is based on an easy-to-repack microcolumn construction integrated into a flow injection manifold coupled directly to ICP-AES’s nebulizer. After on-line extraction/preconcentration of the target analyte onto the surface of the sorbent, successive elution with 1.0 mol L⁻¹ HNO₃ was performed. All main chemical and hydrodynamic factors affecting the effectiveness of the system were thoroughly investigated and optimized. Under optimized experimental conditions, for 60 s preconcentration time, the enhancement factor achieved for the target analytes was between 31 to 53. The limits of detection varied in the range of 0.05 to 0.24 μg L⁻¹, while the limits of quantification ranged from 0.17 to 0.79 μg L⁻¹. The precision of the method was expressed in terms of relative standard deviation (RSD%) and was less than 7.9%. Furthermore, good method accuracy was observed by analyzing three certified reference materials. The proposed method was also successfully employed for the analysis of environmental water samples.     

Ascorbic Acid Sensor Based on CdS QDs@PDA Fluorescence Resonance Energy Transfer

An ascorbic acid (AA) sensor was constructed based on the fluorescence resonance energy transfer (FRET) between CdS quantum dots (CdS QDs) and polydopamine (PDA) to detect trace AA sensitively. FRET occurred due to the broad absorption spectrum of PDA completely overlapped with the narrow emission spectrum of CdS QDs. The fluorescence of CdS QDs was quenched and in the “off” state. When AA was present, the conversion of DA to PDA was hindered and the FRET disappeared, resulting in the fluorescence of CdS QDs in an “on” state. Importantly, the degree of fluorescence recovery of CdS QDs displayed a desirable linear correlation with the concentration of AA in the range of 5.0–100.0 μmol/L, the linear equation is y=0.0119cAA+0.3113, and the detection limit is 1.16 μmol/L (S/N = 3, n = 9). There was almost no interference with common amino acid, glucose and biological sulfhydryl small molecules to AA. Trace amount of AA in vitamin C tablets were determined and satisfactory results were obtained; the recoveries were observed to be 98.01–100.7%.     

Synergistic Effects of Plant Growth Regulators and Elicitors on α-Humulene and Zerumbone Production in Zingiber zerumbet Smith Adventitious Root Cultures

Zingiber zerumbet, also known as ‘Lempoyang’, possesses various phytomedicinal properties, such as anticancer, antimicrobial, anti-inflammatory, antiulcer, and antioxidant properties. Secondary metabolites possessing such properties i.e., zerumbone and α-humulene, are found dominantly in the plant rhizome. Synergistic effects of plant growth hormones and elicitors on in vitro α-humulene and zerumbone production, and biomass growth, in adventitious root culture (AdRC) of Z. zerumbet cultivated in a two-stage culture are reported. The culture was induced by supplementation of 1.0 mg/L NAA and 2.0 mg/L IBA (dark), and subsequently maintained in medium supplemented with 1 mg/L NAA and 3 mg/L BAP (16:08 light-dark cycle), yielded the production of zerumbone at 3440 ± 168 µg/g and α-humulene at 3759 ± 798 µg/g. Synergistic elicitation by 400 μM methyl jasmonate (MeJa) and 400 μM salicylic acid (SA) resulted in a 13-fold increase in zerumbone (43,000 ± 200 µg/g), while 400 μM MeJa and 600 μM SA produced a 4.3-fold increase in α-humulene (15,800 ± 5100 µg/g) compared to control.     

A Simple HPLC/DAD Method Validation for the Quantification of Malondialdehyde in Rodent’s Brain

In the present study, a HPLC/DAD method was set up to allow for the determination and quantification of malondialdehyde (MDA) in the brain of rodents (rats). Chromatographic separation was achieved on Supelcosil LC-18 (3 μm) SUPELCO Column 3.3 cm × 4.6 mm and Supelco Column Saver 0.5 μm filter by using a mobile phase acetonitrile (A) and phosphate buffer (20 mM, pH = 6) (B). Isocratic elution was 14% for (A) and 86% for (B). The injection volume (loop mode) was 100 μL with an analysis time of 1.5 min. Flow rate was set at 1 mL/min. The eluted compound was detected at 532 nm by a DAD detector by keeping the column oven at room temperature. The results indicated that the method has good linearity in the range of 0.2–20 μg/g. Both intra- and inter-day precision, expressed as RSD, were ≤15% and the accuracies ranged between ±15%. The lower limit of quantification (LLOQ), stability, and robustness were evaluated and satisfied the validation criteria. The method was successfully applied in a study of chronic toxicology following different treatment regimens with haloperidol and metformin.