Size of Gold Nanoparticles Driving Selective Amide Synthesis through Aerobic Condensation of Aldehydes and Amines

Metal nanoparticles (NPs) have attracted much attention in many fields due to their intrinsic characteristics. It is generally accepted that smaller NPs (1.5–3 nm) are more active than larger NPs, and reverse cases are very rare. We report here the direct aerobic oxidative amide synthesis from aldehydes and amines catalyzed by polymer‐incarcerated gold (Au) NPs. A unique correlation between imine/amide selectivity and size of NPs was discovered; Au‐NPs of medium size (4.5–11 nm) were found to be optimal. High yields were obtained with a broad range of substrates, including primary amines. Au‐NPs of medium size could be recovered and reused several times without loss of activity, and they showed good activity and selectivity in amide formation from alcohols and amines.     

Fabrication of dendritic gold nanoparticles by use of an ionic polymer template

A facile method for the fabrication of dendritic gold nanoparticles (NPs) by use of an ionic polymer template has been developed. In situ generation of an imidazolium-based (cationic) polymer, poly[1-methyl-3-(4-vinylbenzyl)imidazolium], with AuCl4- counteranions is achieved by addition of HAuCl4 into a solution containing poly[1-methyl-3-(4-vinylbenzyl)imidazolium chloride]. Subsequent reduction with NaBH4 in water or in a mixture of ethanol and water affords various NPs depending on the conditions, including large dendritic gold NPs that have been analyzed by transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), and selected area electron diffraction (SAED). The structures of the dendritic gold NPs were found to depend on the ethanol concentration. Scanning electron microscopy (SEM) images of the ionic polymer reveal that the solvent used to deposit the polymer strongly influences its structure and may be correlated to the structure of the resulting NPs.     

Synthetic polymer nanoparticle-polysaccharide interactions: a systematic study

The interaction between synthetic polymer nanoparticles (NPs) and biomacromolecules (e.g., proteins, lipids, and polysaccharides) can profoundly influence the NPs fate and function. Polysaccharides (e.g., heparin/heparin sulfate) are a key component of cell surfaces and the extracelluar matrix and play critical roles in many biological processes. We report a systematic investigation of the interaction between synthetic polymer nanoparticles and polysaccharides by ITC, SPR, and an anticoagulant assay to provide guidelines to engineer nanoparticles for biomedical applications. The interaction between acrylamide nanoparticles (~30 nm) and heparin is mainly enthalpy driven with submicromolar affinity. Hydrogen bonding, ionic interactions, and dehydration of polar groups are identified to be key contributions to the affinity. It has been found that high charge density and cross-linking of the NP can contribute to high affinity. The affinity and binding capacity of heparin can be significantly diminished by an increase in salt concentration while only slightly decreased with an increase of temperature. A striking difference in binding thermodynamics has been observed when the main component of a polymer nanoparticle is changed from acrylamide (enthalpy driven) to N-isopropylacryalmide (entropy driven). This change in thermodynamics leads to different responses of these two types of polymer NPs to salt concentration and temperature. Select synthetic polymer nanoparticles have also been shown to inhibit protein-heparin interactions and thus offer the potential for therapeutic applications.     

Controlled Assembly of Block Copolymer Coated Nanoparticles in 2D Arrays

The defined assembly of nanoparticles (NPs) in polymer matrices is an important prerequisite for next‐generation functional materials. A promising approach to control NP positions in polymer matrices at the nanometer scale is the use of block copolymers. It allows the selective deposition of NPs in nanodomains, but the final defined and ordered positioning of the NPs within the domains has not been possible. This can now be achieved by coating NPs with block copolymers. The self‐assembly of block copolymer‐coated NPs directly leads to ordered microdomains containing ordered NP arrays with exactly one NP per unit cell. By variation of the grafting density, the inter‐nanoparticle distance can be controlled from direct NP surface contact to surface separations of several nanometers, determined by the thickness of the polymer shell. The method can be applied to a wide variety of block copolymers and NPs and is thus suitable for a broad range of applications.     

Direct deposition of gold nanoparticles onto polymer beads and glucose oxidation with H2O2

Gold nanoparticles (Au NPs) were deposited directly from aqueous solution of diethylenediaminegold(III) complex onto polymer beads commercially available, such as poly(methyl methacrylate) (PMMA), polystyrene (PS), and polyaniline (PANI) without surface modification. The dropwise addition of NaBH4 to reduce Au(III) was found to be very effective to obtain small Au0 NPs with a narrow size distribution except for PANI. The catalytic performance of Au NPs deposited on polymer beads for H2O2 decomposition and glucose oxidation with H2O2 were more significantly affected by the kinds of polymer supports than by the size of Au NPs. The equimolar oxidation of glucose with H2O2 could be operated by controlling the decomposition rate of H2O2 over Au/PMMA.     

粒子-聚合物相互作用与粒子-粒子相互作用对聚合物基纳米复合物力学性能的影响

聚合物基纳米复合物(PNCs)具有比传统高分子材料更加优异的光学、力学、热力学等性能,广泛应用于各个工程领域.而纳米粒子(NPs)对材料性能提高的机理则是当前聚合物纳米复合物领域研究的重要问题,聚合物纳米复合体系相互作用的影响因素众多,至今尚未明确并完整建立复合体系相互作用与性能增强之间的关系.本文总结了近年来关于纳米粒子填充聚合物基体力学性能的研究,从粒子-聚合物相互作用和粒子-粒子相互作用角度阐述了聚合物纳米复合体系力学性能的增强机理,并根据体系中不同的结构关系分别总结了聚合物/未改性纳米粒子复合体系和聚合物/聚合物接枝纳米粒子复合体系中影响力学性能的因素.该部分内容具有重要的理论和实践意义,有助于构建复合体系微观结构与宏观性能之间的关系,进而对微观层面调控PNCs的力学性能提供指导.     

Polymer microgels: reactors for semiconductor, metal, and magnetic nanoparticles

We report a strategy for the production of materials with structural hierarchy. The approach employs polymer microgels as templates for the synthesis of semiconductor, metal, or magnetic nanoparticles (NPs). We show that NPs with predetermined dimensions and size-dependent properties can be synthesized by using a very delicate balance between the reaction conditions, the composition and the structure of microgel templates, and the concentration of NPs in the microgel. Postheat treatment of microgels doped with semiconductor nanoparticles reduces NP polydispersity and allows control of their photoluminescence. Microgel templates are particularly beneficial in the synthesis of polymer microspheres heavily loaded with monodisperse superparamagnetic Fe(3)O(4) NPs. Hybrid submicrometer-size microgels have promising potential applications in photonics, catalysis, and separation technologies.     

Effect of liquid-liquid demixing on the membrane morphology,gas permeation,thermal and mechanical properties of cellulose acetate hollow fibers

The polymer/solvent/nonsolvent systems with different L-L demixing rates were prepared by employing a binary solvent mixture consisting of two solvents - one exhibits an instantaneous liquid-liquid (L-L) demixing process, while the other exhibits a delayed L-L demixing process. It was found that an increase in the delay time of L-L demixing results in a denser membrane structure, an increase in fiber mechanical strength, a delay desorption of moisture in membrane, and a decrease in gas permeance, for a hollow fiber fabrication system consisting of cellulose acetate (CA) (polymer), N-methyl-pyrrolidone (NMP) (solvent having an instantaneous L-L demixing property), tetrahydrofuran (THF) (solvent having a delayed L-L demixing property) and water (nonsolvent). Hollow fibers prepared under an instantaneous L-L demixing process tends to have more mechanically weak points (flaws) than those prepared under a delayed L-L demixing process. Surprisingly, SEM observation suggests that membranes wet-spun from solutions containing both THF and NMP tend to have a rough outer skin morphology. Inconsistent demixing and the collapse of the outer nascent skin may be the main causes. In addition, the effect of bore fluid chemistry on fiber performance is much more pronounced for systems having a delayed L-L demixing mechanism than that having an instantaneous L-L demixing.     

Highly efficient polymer‐stabilized palladium heterogeneous catalyst: Synthesis,characterization and application for Suzuki–Miyaura and Mizoroki–Heck coupling reactions

A suitable approach to stabilize palladium nanoparticles (Pd NPs), with an average diameter of 3–4 nm, on magnetic polymer is described. A new magnetic polymer containing 4′‐(4‐hydroxyphenyl)‐2,2′:6′,2″‐terpyridine (HPTPy) ligand was prepared by the polymerization of itaconic acid (ITC) as a monomer and trimethylolpropane triacrylate (TMPTA) as a cross‐linker and fully characterized. Pd NPs embedded on the magnetic polymer were successfully applied in Suzuki–Miyaura and Mizoroki–Heck coupling reactions under low palladium loading conditions, and provided the corresponding products with excellent yields (up to 98%) and high catalytic activities (TOF up to 257 hr^?1). Also, the catalyst can be easily separated and reused for at least consecutive five times with a small drop in catalytic activity.     

Tailoring block copolymer and polymer blend morphology using nanoparticle surfactants

Combining the functionality of nanoparticles (NPs) with the processability of polymers offers great promise for designing novel materials. In particular, NPs with tailored surface properties can effectively modify the interface between two distinct fluids and/or different polymer matrices which allows them to function as efficient surfactants. The efficiency of NP surfactants is strongly affected by their size and shape, which influences their adsorption energy to the interface, and the entropic contribution to the system. In this review, the assembly of size- and shape-controlled inorganic NPs at the interface of block copolymers (BCPs) and polymer blends has been focused. First, we discuss the design of size- and shape-controlled NP surfactants and we review the examples of NP surfactant-driven BCPs and polymer blend morphologies. In addition, we review the recent investigations of the morphological transition of BCP emulsion particles induced by NP surfactants. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016, 54, 228–237     

Various Au nanoparticle organizations fabricated through SiO2 monomer induced self-assembly

A novel method has been developed to fabricate the assembly of Au colloidal nanoparticles (NPs) using SiO(2) monomers. The key strategy was the use of a controlled sol-gel procedure including hydrolysis, deposition, and condensation of tetraethyl orthosilicate (TEOS). Namely, the assembly of Au NPs was created by the anisotropic deposition of SiO(2) monomers and subsequent permanent fixing by the growth of a SiO(2) shell. Various assemblies of Au NPs such as dimer, trimer, and pearl-chain morphology were fabricated by systematically changing the concentration and injection speed of TEOS. A longitudinal plasmon resonance band was observed as a result of the assembly of Au NPs and can be tuned from visible to near-infrared by altering the length of pearl-chain morphology. In addition, single Au NP was homogeneously coated with a SiO(2) shell by means of controlling the deposition rate of SiO(2) monomers during a Sto?ber synthesis without the use of a silane coupling agent or bulk polymer as the surface primer to render the Au surface vitreophilic. The Au NPs (mean size 11.4 nm in diameter) were thus encapsulated into SiO(2) beads with a wide range of sizes (from 20 to 50 nm in diameter). These pure SiO(2)-coated Au beads with tunable shell thickness should be crucial for biosensors, particularly as Raman-tag particles.     

Fabrication of carbon microcapsules containing silicon nanoparticles for anode in lithium ion battery

Carbon microcapsules containing silicon (Si) nanoparticles (NPs) were prepared from silicon-embedded polymer microspheres. The precursors, polymeric microspheres containing silicon nanoparticles were fabricated by a facile emulsion polymerization with surfactants, sodium dodecyl sulfate and dodecyltrimethylammonium bromide. The effects of monomer, surfactant concentration, and ionic character of surfactant on the formation of microspheres were demonstrated. The successful fabrication of polystyrene/polydivinylbenzene microspheres with Si NPs was confirmed by scanning electron microscopy. Subsequent thermal treatment produced carbon microcapsules having Si NPs. Volume shrinkage of polymer spheres during carbonization step resulting in the formation of internal free spaces in carbon microcapsules is the critical process in this experiment, which can accommodate volume changes of Si NPs during Li ion charge/discharge processes. The successful encapsulation of Si NPs with exterior carbon shell was clearly shown by transmission electron microscopy and X-ray diffraction. The change in size distribution and structure of polymer and carbon microspheres was also revealed. The cyclic performances of these Si@C microcapsules were measured with lithium battery half cell tests.     

Electrochemical sensing and simultaneous determination of ascorbic acid,dopamine and uric acid at nickel nanoparticles/poly (1,2-diaminoanthraquinone) modified electrode

A highly sensitive sensor based on Ni nanoparticles/poly (1,2-diaminoanthraquinone) modified electrode was fabricated at glassy carbon (GC) electrode (Ni/PDAAQ@GC ME) using cyclic voltammetry technique. The incorporation of nickel (II) ions nanoparticles (Ni NPs) followed by anodic polarization process was achieved. Surface morphologies of both PDAAQ@GC ME and Ni/PDAAQ@GC MEs were studied by scanning electron microscope. Ni/PDAAQ@GC ME was tested for simultaneous determination of ascorbic acid (AA), dopamine (DA) and uric acid (UA) by square wave voltammetry technique. The ME showed excellent electrocatalytic activity toward electrooxidation of these biomolecules in their single, binary and ternary systems in alkaline 0.1 M NaOH solutions. Experiment revealed that the low detection limits (LOD) for AA, DA and UA were 0.11, 0.072 and 1.2 µM in single system, respectively, and 0.069, 0.29 and 0.12 µM in ternary system, respectively.     

Structural,thermal, optical and conductivity studies of Co/ZnO nanoparticles doped CMC polymer for solid state battery applications

In this study, a simple chemical precipitation method was used to synthesize ZnO: Co²⁺ as nanoparticles. The solution casting technique was used for the preparation of polymer films of Carboxymethyl cellulose (CMC) doped with different contents (0.5, 1.5, 3, and 5 wt%) of ZnO/Co NPs. As shown by the X-ray diffraction, the average size of ZnO/Co crystallite of the NPs is 25.6 nm. Meanwhile, the addition of ZnO/Co reduced the semi-crystallinity of CMC. The Fourier transform infrared (FTIR) confirmed the interaction between the ZnO/Co NPs and the polymer CMC. The direct and indirect band gap (Eg) was reduced from (5.32–5.01 eV and 5.20 to 4.99 eV respectively) with the increase in ZnO/Co NPs content up to 3 wt% after this content the Eg is increased as shown by the UV–Vis spectra. In addition, the results of TGA displayed the decomposition of the nanocomposite to be little compared to that of the pure CMC indicating the success of fabrication of products. The improvement of the ionic conductivity was noticed upon the addition of ZnO/Co NPs into the polymer CMC system which can be explained in terms of an increase in amorphicity as shown by the impedance spectroscopic study. It was found that the optimum ionic conductivity (3.209 × 10⁻⁶ Scm⁻¹) at ambient temperature was higher for the sample containing 1.5 wt% ZnO/Co NPs with highest of amorphicity and the lowest total loss of weight. Therefore, the improvements in optical properties, thermal stability, and AC conductivity which were observed represent a strong support for the use of the nanocomposite films in the solid state battery applications.     

Electrochemical Detection and Characterisation of Polymer Nanoparticles

We report the detection and characterisation of polymer nanoparticles using electrochemistry using poly(N‐vinylcarbazole) nanoparticles (PVK NPs) as a model system. These were synthesised using the reprecipitation method. The number of electrons (n=2) transferred per PVK monomer was characterised by drop‐casting method. Sticking and sensing experiments were then conducted, which involve PVK nanoparticle immobilisation on the electrode surface and subsequent oxidative sensing, to enable rapid detection of polymer nanoparticles in aqueous solution. It is shown for the first time, that using this “stick and sense” method, polymer nanoparticles in aqueous solution can be immobilised, preconcentrated and quantified.     

Effect of double quaternary ammonium groups on micelle formation of partially fluorinated surfactant

Water-in-oil microemulsions (w/o μEs) stabilized by the cationic surfactant cetyltrimethylammonium chloride (CTACl) have been used as reaction media to generate Au nanoparticles (Au-NPs). In addition the pure μEs have been used as media to disperse Au and Pd-NPs, which have been pre-synthesised in aqueous phases and stabilized by sodium 2-mercaptoethanesulfonate (MES) ligands, and also commercially available SiO(2)-NPs. A general method for recovery and separation of the nanoparticles from these mixed NP-μE systems has been demonstrated by tuning phase behavior of the background microemulsions. Addition of appropriate aliquots of water drives a clean liquid-liquid phase transition, resulting in two macroscopic layers, the NPs preferentially partition into an upper oil-rich phase and are separated from excess surfactant which resides in a lower aqueous portion. UV-vis and (1)H NMR spectroscopy have been used to follow these separation processes and quantify the recovery and recycle efficiencies for the different NPs. For example, ～90% of the microemulsion-prepared Au-NPs can be recovered; with even greater separation efficiencies attainable for pre-synthesised MES-stabilized Au-MES-NPs (～98%) and Pd-MES-NPs (92%). For the silica NP-μE dispersions gravimetry indicates ～84% recovery of the NPs. TEM images of all systems showed that NP shapes and size distributions were generally preserved after these phase transfer processes. This low-energy and cost-effective purification route appears to be a quite general approach for processing different inorganic NPs, having advantages of being isothermal, using only commercially available inexpensive components and requiring no additional organic solvents.     

Solid-state storage of Ag nanoparticles in anion exchange resin beads and their recovery

This paper reports the idea and describes a method of reversible storage and recovery of silver nanoparticles (NPs) in anion exchange resin beads based on the principle of ion exchange. We also report that similar exchange of NPs was not possible with cation exchange resins. The Ag NPs were stored by simple exchange of anions of the resins, which were activated with OH- and NO3- ions. FTIR spectroscopic measurements support that the Ag NPs were exchanged with NO3- ions in the resins. The so-stored NPs could be regenerated by addition of NaBH4 solution to the resins. These NPs were recovered and subsequently utilized for catalytic reduction of an organic dye (eosin). Powder X-ray diffraction (XRD) pattern indicated storage of the NPs in the form of various oxides of silver in the resin, with the peak value of intensity corresponding to XRD of the NPs not changing with time. Scanning electron microscopic measurements show that the NPs in the beads were stable for over a month without the formation of any apparent agglomeration.     

Polymer/metal segmental Janus nanoparticles

Polymer/metal composite segmental Janus nanoparticles(NPs) are synthesized by sequential growth againstpoly(4-vinylpyridine)(P4VP) crosslinked cP4VP-PS Janus NPs. A Janus cluster of poly(4-vinylpyridine)-block-polystyrene(P4VPb-PS) diblock copolymer is self-organized after absorption onto a silica patchy sphere via hydrogen bonding. Selective crosslinking of P4VP leads to the formation of robust cP4VP-PS Janus NPs. Within the cP4VP domain, functional species such as metals are preferentially grown by in situ reduction. Other thiol-capped polymers, for example, thiol-cappedpoly(Nisopropylacrylamide)(PNIPAM-SH), can be conjugated onto the opposite side to form polymer/metal triple segmental Janus NPs. The hyperthermia effect of Au NP of PNIPAM-Au@cP4VP-PS by near infrared(NIR) irradiation can trigger a fast transition from amphiphilic to hydrophobic of the Janus NPs at low surrounding temperature. De-stabilization ofthe emulsion is NIR triggered although the system temperature is below LCST(~32 °C).     

Synthesis, characterization, and antifouling potential of functionalized copper nanoparticles

The synthesis, characterization, and antimicrobial properties of functionalized copper nanoparticle/polymer composites are reported. Copper nanoparticles (Cu NPs) are stabilized by surface attachment of the acrylic functionality that can be copolymerized with other acrylic monomers, thus, becoming an integral part of the polymer backbone. Biological experiments show that Cu NP/polymer composites exhibit antimicrobial activity similar to that of conventional copper-based biocides. Atomic absorption spectroscopy shows the smallest amount of copper ions leaching from chemically bound acrylated Cu NPs compared to the nonfunctionalized biocides. These composites have a strong potential for use in antibacterial or marine antifouling coatings.     

The Influence of Surface Composition of Nanoparticles on their Interactions with Serum Albumin

Interactions between differently functionalised silver and gold nanoparticles (NPs) as well as polystyrene nanoparticles with bovine serum albumin (BSA) are studied using circular dichroism (CD) spectroscopy. It is found that the addition of NPs to the protein solution destroys part of the helical secondary structure of the protein as a result of surface adsorption. From the loss of free protein and hence the extent of their structural change adsorption equilibrium constants are derived. The results reveal that citrate‐coated gold and silver NPs exhibit much stronger interactions with BSA than polymeric or polymer‐coated metallic NPs. It is therefore concluded that for the particles considered, the influence of surface composition on the interaction behaviour dominates that of the core.