Multi-reference calculations of the photodissociation of HSCH3 molecule

This paper performs multi-reference second-order perturbation theory calculations on the ground state and a number of low-lying excited states of HSCH3 molecule, and calculates the vertical excitation energies and low-energy potential-energy curves, based on which the photodissociation channels of HSCH3 at 193,222,248 nm are clarified.     

Coalescence of heteroclusters Au767 and Ag767: a molecular-dynamics study

This paper studies the coalescence of heteroclusters Au767 and Ag767 by using molecular dynamics with the embedded atom method, where layer atomic energy is employed to describe the potential energy variation of per atom in different layers along radial direction. The results show that the coalescence is driven by releasing the atomic energy of the coalesced zone. The deformation, which is induced by substitutional and vacancy diffusion during the coalescence, makes the coalesced cluster disorder. If the summation of the thermal energy and the released atomic energy is large enough to keep the disorder state, the clusters form a metastable liquid droplet; otherwise, the clusters coalesce into a solid cluster when the coalesced cluster reaches the equilibrium state, and the coalesced cluster experiences liquid to solid ordering changes during the coalescence of a solid Au767 with a liquid Ag767 and a liquid Au767 with a liquid Ag767. The centre of figure of the cluster system is shifted during the coalescence process, and higher coalescence temperature causes larger shift degree.     

Equilibrium geometries and electronic properties of BenLi （n=2-15） clusters from first principles

This paper studies the equilibrium geometries and electronic properties of Ben and BenLi clusters, up to n=15, by using density-functional theory（DFT） at B3LYP/6-31G（d） level. The lowest-energy structures of Ben and BenLi clusters were determined. The results indicate that a single lithium impurity enhances the stability and chemical reactivity of the beryllium clusters. It finds that the geometries of the host clusters change significantly after the addition of the lithium atom for n ≥8. The lithium impurity prefers to be on the periphery of beryllium clusters, and occupies vertex sites. Both Be4Li, Be9Li, and Be13Li were found to be particularly stable with higher average binding energy, local peaks of second-order energy difference and fragmentation energies. For all the BenLi clusters studied, we found charge transfers from the Li to Be site and co-existence of covalent and metallic bonding characteristics.     

Infrared-to-visible and infrared-to-violet upconversion fluorescence of rare earth doped LaF3 nanocrystals

This paper reports that hexagonal-phase LaF3：Yb0.20^3＋,Er0.02^3＋ and LaF3：Yb0.20^3＋, Tm0.02^3＋ nanocrystals （NCs） were synthesized via a hydrothermal method. The transmission electron microscopy, selected area electron diffraction, powder x-ray diffraction, and thermogravimetric analysis are used to characterize the NCs. Under 980 nm excitation, the Yb^3＋/Er^3＋ and Yb^3＋/Tm^3＋ codoped NCs colloidal solutions present bright green and blue upconversion fluorescence, respectively. These NCs show efficient infrared-to-violet and infrared-to-visible upconversion. The upconversion fluo- rescence mechanisms of LaF2：Yb0.20^3＋, Er0.02^3＋ and LaF3：Yb0.20^3＋,Tm0.02^3＋ NCs are investigated with a 980-nm diode laser as excitation source.     

Density functional study on structural and electronic properties of bimetallic gold--yttrium clusters: comparison with pure gold and yttrium clusters

Employing first-principles methods, based on the density functional theory, this paper investigates the ground state geometric and electronic properties of pure gold clusters, pure yttrium clusters and gold clusters doped each with one yttrium atom. It is shown that the average bond lengths in the Augold--yttrium bimetallic cluster, density functional theory, HOMO--LUMO gap, equilibrium structureProject supported by the Education Committee of Chongqing (Grant No KJ051105) and the National Natural Science Foundation of China (Grant No 10276028).3640, 3640B, 3120A, 3130J9/1/2007 12:00:00 AMEmploying first-principles methods, based on the density functional theory, this paper investigates the ground state geometric and electronic properties of pure gold clusters, pure yttrium clusters and gold clusters doped each with one yttrium atom. It is shown that the average bond lengths in the Augold--yttrium bimetallic cluster, density functional theory, HOMO--LUMO gap, equilibrium structureProject supported by the Education Committee of Chongqing (Grant No KJ051105) and the National Natural Science Foundation of China (Grant No 10276028).3640, 3640B, 3120A, 3130J9/1/2007 12:00:00 AMEmploying first-principles methods, based on the density functional theory, this paper investigates the ground state geometric and electronic properties of pure gold clusters, pure yttrium clusters and gold clusters doped each with one yttrium atom. It is shown that the average bond lengths in the Au$_{n - 1}$Y($n \le $9) bimetallic clusters are shorter than those in the corresponding pure gold and yttrium clusters. The most stable isomers of the yttrium-doped gold clusters tend to equally delocalize valence s, p and d electrons of the constituent atoms over the entire structure. The Y atom has maximum number of neighbouring Au atom, which tends to be energetically favourable in the lowest-energy equilibrium structures, because the Au--Y bond is stronger than the Au-Au bond. The three-dimensional isomers of Au$_{n - 1}$Y structures are found in an early appearance starting at $n$=5 (Au$_{4}$Y). Calculated vertical ionization potential and electron affinities as a function of the cluster size show odd-even oscillatory behaviour, and resemble pure gold clusters. However, one of the most striking feature of pure yttrium clusters is the absence of odd-even alternation, in agreement with mass spectrometric observations. The HOMO--LUMO gap of Au$_{3}$Y is the biggest in all the doped Au$_{n - 1}$Y($n \le $9) bimetallic clusters.     

Self-organization effect in poly（3-hexylthiophene）： methanofullerenes solar cells

This paper studies the self-organization of the polymer in solar cells based on poly（3-hexylthiophene）： [6, 6]-phenyl C61-butyric acid methyl ester by controlling the growth rate of active layer. These blend films are characterized by UV-vis absorption spectroscopy, charge-transport dark J - V curve, x-ray diffraction pattern curve, and atomic force microscopy. The results indicate that slowing down the drying process of the wet films leads to an enhanced selforganization, which causes an increased hole transport. Increased incident light absorption, higher carrier mobility, and balanced carrier transport in the active layer explain the enhancement in the device performance, the power conversion efficiency of 3.43% and fill factor up to 64.6% are achieved under Air Mass 1.5, 100 mW/cm^2.     

Structures and electronic properties of SimN8-m（0 〈 m 〈 8） clusters： a density functional theory study

The geometries, electronic structures and related properties of SimN8-m（0 〈 m 〈 8） clusters are studied using density functional theory （DFT） with hybrid functional B3LYP. The calculated results reveal several trends. For any stoichiometric clusters, the lowest energy isomers with an alteration of N and Si atoms are favourable in energy if the numbers of Si and N atoms are large enough to form ... Si N-Si-N... alternative chains. The bond lengths of single Si-N bonds are very close to the corresponding values of the bulk and other SiN clusters. The geometries for N-rich and Si4N4 clusters are planar structures, but three-dimensional structures are favourable in energy for Si-rich clusters. With the increase of m, the isotropic polarizability and average polarizability increase, the total binding energies generally decrease, the HOMO-LUMO gap and vertical ionization potential oscillate with increasing number of valence electrons, and their values with even valence electrons are larger than those with odd valence electrons. The atomic charges, IR and Raman properties are also reported.     

First-principles study of structures and electronic properties of cadmium sulfide clusters

The lowest-energy structures and the electronic properties of CdnSn （n = 1 - 8） clusters have been studied by using denslty-functional theory simulating package DMol^3 in the generalized gradient approximation （GGA）. The ring-like structures are the lowest-energy configurations for n = 2, 3 and the three-dimensional spheroid configurations for n = 4 - 8. The three-dimensional structures may be considered as being built from the Cd2S2 and Cd3S3 rings. Compared to the previous reports, we have found the more stable structures for CdnSn（n = 7, 8）. Calculations show that the magic numbers of CdnSn （n = 1-8） clusters are n = 3 and 6. As cluster size increases, the properties of CdnSn clusters tend to bulk-like ones in binding energy per CdS unit and Mulliken atomic charge, obtained by comparing with the calculated results of the wurtzite and zinc blende CdS for the same simulating parameters.     

The effect of doped ions on single-molecule magnets of the Mn12-Ac family

This paper investigates the single-molecule magnets of pure and Cr/Fe-doped Mn12-Ac. The components of the mixed crystals are identified by AC susceptibility technique. The ground-state spin and anisotropy parameters of doped Mn12-Ac are obtained： （i） MnllCr-Ac （S=19/2, D=0.62K, B=0.0009K, A=63K）, and （ii） Mn11Fe-Ac （S=21/2, D=0.39 K, B=0.001 K, △=55 K）. The single-ion origin of the magnetic anisotropy is discussed.     

A density functional theoretical investigation of RhSin（n = 1-6） clusters

This paper computationally investigates the RhSin （n = 1 6） clusters by using a density functional approach. Geometry optimizations of the RhSin （n = 1 6） clusters are carried out at the B3LYP level employing LanL2DZ basis sets. It presents and discusses the equilibrium geometries of the RhSin （n = 1-6） clusters as well as the corresponding averaged binding energies, fragmentation energies, natural populations, magnetic properties, and the energy gaps between the highest occupied molecular orbital and the lowest unoccupied molecular orbital. Theoretical results show that the most stable RhSin（n = 1-6） isomers keep an analogous framework of the corresponding Sin＋1 clusters, the RhSi3 is the most stable cluster in RhSin （n = 1-6） isomers. Furthermore, the charges of the lowest-energy RhSin （n = 1-6） clusters transfer mainly from Si atom to Rh atom. Meanwhile, the magnetic moments of the RhSin（n = 1-6） arises from the 4d orbits of Rh atom. Finally, compared with the Sin＋1 cluster, the chemical stability RhSin clusters are universally improved.     

Stability of small Ni-Ti bimetallic clusters studied by density functional theory

The low-energy structures and the electronic and the magnetic properties of small NiNiNi$_{m}$Ti$_{n}$ clusters, lowest-energy structure, electronic and magnetic propertiesProject supported by the National Natural Science Foundation of China (Grant No.~10874039), and the Natural Science Foundation of Hebei Province of China (Grant Nos.~A2009000246 and 2009000243).3120A, 3640B, 2110K7/3/2009 12:00:00 AMThe low-energy structures and the electronic and the magnetic properties of small NiNiNi$_{m}$Ti$_{n}$ clusters, lowest-energy structure, electronic and magnetic propertiesProject supported by the National Natural Science Foundation of China (Grant No.~10874039), and the Natural Science Foundation of Hebei Province of China (Grant Nos.~A2009000246 and 2009000243).3120A, 3640B, 2110K7/3/2009 12:00:00 AMThe low-energy structures and the electronic and the magnetic properties of small Ni$_{n}$Ti$_{n}$ ($n=1$--$6$) and Ni$_{m}$Ti$_{n}$ ($1 \le n \le 4$, $1 \le m \le 4$, $n \ne m$) clusters are investigated by performing all-electron calculations based on density functional theory. Ground states and several isomers near the ground states are determined for these clusters. The results indicate that the growth of small Ni$_{m}$Ti$_{n}$ clusters prefers to form rich Ti--Ni and Ti--Ti bonds. When the percentage of titanium atoms is significantly greater than that of nickel atoms, the nickel atoms are most frequently found above the surface; in contrast, the titanium atoms prefer the bridging sites. A M\"{u}lliken spin population analysis indicates that the total spin of titanium-nickel clusters is not always zero.http://cpb.iphy.ac.cn/CN/10.1088/1674-1056/19/4/043102https://cpb.iphy.ac.cn/CN/article/downloadArticleFile.do?attachType=PDF&id=111644NimTin;clusters;lowest-energy;structure;electronic;and;magnetic;propertiesThe low-energy structures and the electronic and the magnetic properties of small Nin Tin(n = 1-6) and Ni m Ti n(1 ≤ n ≤ 4,1 ≤ m ≤ 4,n ≠ m) clusters are investigated by performing all-electron calculations based on density functional theory.Ground states and several isomers near the ground states are determined for these clusters.The results indicate that the growth of small Ni m Ti n clusters prefers to form rich Ti-Ni and Ti-Ti bonds.When the percentage of titanium atoms is significantly greater than that of nickel atoms,the nickel atoms are most frequently found above the surface;in contrast,the titanium atoms prefer the bridging sites.A Mu¨lliken spin population analysis indicates that the total spin of titanium-nickel clusters is not always zero.     

Compact efficient optical parametric generator internal to a Q-switched Nd:YVO4 laser with periodically poled MgO:LiNbO3

This paper demonstrates a compact efficient optical parametric generator internal to a Q-switched diode-end-pumped Nd:YVOquasi-phase-matching, intracavity optical parametric generator, periodically poled MgO-doped lithium niobate (PPMgLN)Project supported by the National Natural Science Foundation of China (Grant Nos 10474071 and 60671036).4265K, 4260F, 4270This paper demonstrates a compact efficient optical parametric generator internal to a Q-switched diode-end-pumped Nd:YVOquasi-phase-matching, intracavity optical parametric generator, periodically poled MgO-doped lithium niobate (PPMgLN)Project supported by the National Natural Science Foundation of China (Grant Nos 10474071 and 60671036).4265K, 4260F, 4270This paper demonstrates a compact efficient optical parametric generator internal to a Q-switched diode-end-pumped Nd:YVOquasi-phase-matching, intracavity optical parametric generator, periodically poled MgO-doped lithium niobate (PPMgLN)Project supported by the National Natural Science Foundation of China (Grant Nos 10474071 and 60671036).4265K, 4260F, 4270This paper demonstrates a compact efficient optical parametric generator internal to a Q-switched diode-end-pumped Nd:YVOquasi-phase-matching, intracavity optical parametric generator, periodically poled MgO-doped lithium niobate (PPMgLN)Project supported by the National Natural Science Foundation of China (Grant Nos 10474071 and 60671036).4265K, 4260F, 4270This paper demonstrates a compact efficient optical parametric generator internal to a Q-switched diode-end-pumped Nd:YVOquasi-phase-matching, intracavity optical parametric generator, periodically poled MgO-doped lithium niobate (PPMgLN)Project supported by the National Natural Science Foundation of China (Grant Nos 10474071 and 60671036).4265K, 4260F, 4270This paper demonstrates a compact efficient optical parametric generator internal to a Q-switched diode-end-pumped Nd:YVO$_{4}$ laser with periodically poled MgO:LiNbO₃(PPMgLN). With the Q-switch set at a repetition rate of 25kHz and the PPMgLN crystal operated at room temperature (25\du\,), the intracavity optical parametric generator threshold was reached as a diode pump power of 0.9\,W. A maximum signal output power of 0.34W with a pulse width of 25\,ns and a beam quality factor of 1.4 was obtained at an incident diode power of 3.4\,W, leading to a conversion efficiency of 10{\%} with a slope efficiency of 14.4{\%}. By varying the crystal temperature from 25 to 200\du, the output signal wavelengths were tuned in range of 1506--1565\,nm. Over a 30-minutes interval, the instability of the signal power was measured to be less than 1{\%}. In addition, the threshold pump intensity for the intracavity optical parametric generator is theoretically investigated, and the obtained result is in good agreement with the experimental results.     

First-principles study of interphase Ni3Sn in Sn--Ni alloy for anode of lithium ion battery

This paper investigates the mechanism of Li insertion into interphase Ni3Sn in Ni-Sn alloy for the anode of lithium ion battery by means of the first-principles plane-wave pseudopotential. Compared with other phases, it is found that the Ni3Sn has larger relative expansion ratio and lower electrochemical potential, with its specific plateaus voltage around 0.3 eV when lithium atoms are filled in all octahedral interstitial sites, and the relative expansion ratio increasing dramatically when the lithiated phase transits from octahedral interstitial sites to tetrahedral interstitial sites. So this phase is a devastating phase for whole alloy electrode materials.     

Single crystalline boron carbide nanobelts: synthesis and characterization

This paper reports that the large-scale single crystalline boron carbide nanobelts have been fabricated through a simple carbothermal reduction method with B/B2O3/C/Fe powder as precursors at 1100℃. Transmission electron microscopy and selected area electron diffraction characterizations show that the boron carbide nanobelt has a B4C rhomb-centred hexagonal structure with good crystallization. Electron energy loss spectroscopy analysis indicates that the nanobelt contains only B and C, and the atomic ratio of B to C is close to 4：1. High resolution transmission electron microscopy results show that the preferential growth direction of the nanobelt is [101]. A possible growth mechanism is also discussed.     

First-principles calculations for elastic properties of rutile TiO2 under pressure

This paper studies the equilibrium structure parameters and the dependences of the elastic properties on pressure for rutile TiO2 by using the Cambridge Serial Total Energy Package （CASTEP） program in the frame of density functional theory. The obtained equilibrium structure parameters, bulk modulus B0 and its pressure derivative B′0 are in good agreement with experiments and the theoretical results. The six independent elastic constants of rutile TiO2 under pressure are theoretically investigated for the first time. It is found that, as pressure increases, the elastic constants C11, C33, C66, C12 and C13 increase, The variation of elastic constant C44 is not obvious and the anisotropy will weaken.     

Formation and photoluminescence properties of boron nanocones

This paper reports that a simple chemical vapour deposition method has been adopted to fabricate large scale, high density boron nanocones with thermal evaporation of B/B2O3 powders precursors in an Ar/H2 gas mixture at the synthesis temperature of 1000-1200℃. The lengths of boron nanocones are several micrometres, and the diameters of nanocone tops are in a range of 50-100 nm. transmission electron microscopy and selected area electron diffraction indicate that the nanocones are single crystalline α-tetragonal boron. The vapour liquid solid mechanism is the main formation mechanism of boron nanocones. One broad photolumineseence emission peak at the central wavelength of about 650 nm is observed under the 532 nm light excitation. Boron nanocones with good photoluminescence properties are promising candidates for applications in optical emitting devices.     

Effect of magnetic field on the spin-Peierls transition in single-crystal CuGeO

This paper reports that high quality CuGeO3 single crystals were successfully grown by floating-zone technique and the magnetic property was studied. The temperature dependence of magnetic susceptibility below the spin-Peierls （SP） transition temperature （Tsp） under magnetic fields applying along both the a- and c-axis direction can be fitted well by a model of noninteracting dimmers. The spin gap derived from the fitting is consistent with other reports. There is a very weak anisotropy in the fitting parameters for different directions, which should be expected from a SP system. A small upturn in susceptibility at low temperature due to paramagnetic impurities and/or defects can be observed. A suppression of the upturn by magnetic field is first discovered in this system and the possible origins for this suppression are discussed.     

Effect of the stoichiometry on the electronic structure of the Ni（111）/α-Al2O3（0001） interface： a first-principles investigation

In this paper first-principles calculations of Ni（111）/α-Al2O3（0001） interfaces have been performed, and are compared with the preceding results of the Cu （111）/α-Al2O3（0001） interface [2004 Phil. Mag. Left. 84 425]. The AI- terminated and O-terminated interfaces have quite different adhesion mechanisms, which are similar to the Cu（111）/α Al2O3（0001） interface. For the O-terminated interface, the adhesion is caused by the strong O-2p/Ni-3d orbital hybridization and ionic interactions. On the other hand, the adhesion nature of the Al-terminated interface is the image-like electrostatic and Ni-Al hybridization interactions, the latter is substantial and cannot be neglected. Charge transfer occurs from Al2O3 to Ni, which is opposite to that in the O=terminated interface. The charge transfer direction for the Al-terminated and O-terminated Ni（111）/α-A1203（0001） interfaces is similar to that in the corresponding Cu（111）/α- Al2O3（0001） interface, but there exist the larger charge transfer quantity and consequent stronger adhesion nature, respectively.     

First-principles investigation of BAs and BxGa1-xAs alloys

First-principles investigation of BAs and BxGa1-xAs alloys Using first-principles calculations in the generalized gradient approximation, the electronic properties of BAs and BxGa1-xAs alloys are studied. At the Brillouin-zone centre, the lowest conduction band is the three-degenerate p-like Г15c state rather than s-like Г1c state, and the conduction band minimum （CBM） is along the A line between the Г and X points-at approximately 11/14（1,0,0）2π/a. With boron content at 0%-18.75%, BxGa1-xAs alloys have a small （2.6 eV） and relatively composition-independent band-gap bowing parameter, the band-gap increases monotonically by -18meV/B% with increasing boron content. In addition, the formation enthalpies of mixing for BxGa1-xAs alloys with boron content at 6.25% and 12.5% are calculated, and the large formation enthalpies may explain the difficulty in alloying boron to GaAs.     

Theoretical investigation on near-infrared and visible absorption spectra of nanometallic aluminium with oxide coating in nanoenergetic materials: size and shape effects

The effects of metal core dimension, oxide shell thickness and ellipsoid aspect ratio of Al-Al2O3 core-shell nanoparticles on the near-infrared and visible absorption spectra of nanocomposite Al-Al2O3/nitrocellulose（NC） film are investigated by numerical calculations. Both the size-dependent interband transitions and frequency-dependent free electron damping of the nanometallic aluminium are taken into account in the calculations. Oxidation effect of nanoaluminium is also analysed. It is shown that oxidation may enhance but may also reduce the optical absorption, depending on the excited light energy and initial dimension of nanoparticle. Metal core size and excited light energy dominate the absorption characteristic. The absorption ability of ellipsoidal nanoparticles is larger than that of spheroidal nanoparticles and increases by the square index as the aspect ratio increases. These calculations will provide some significant theoretical guidance for the preparation and laser ignition of nanoenergetic materials.