Investigation of surface plasmon biosensing using gold nanoparticles enhanced ellipsometry

We present a label-free, nondestructive and high sensitivity biosensor by using the phase information of a gold nanoparticles enhanced ellipsometry signal. The refractive index (RI) resolution from ellipsometric phase information is of the order of 1.6×10(-6) RI units. Furthermore, spectroscopic and dynamic measurements show substantial change in the phase signal when biomolecules are coated on gold nanoparticles. The detection limit of our proposed technique is up to ～18?pM concentration of the target biomolecules.     

Phosphorylcholine functionalized dendrimers for the formation of highly stable and reactive gold nanoparticles and their glucose conjugation for biosensing

Phosphorylcholine (PC)-functionalized poly(amido amine) (PAMAM) dendrimers were prepared and used as both reducing and stabilizing agents for synthesis of highly stable and reactive gold nanoparticles (Au NPs). Biomimetic PC-functionalized PAMAM dendrimers-stabilized gold nanoparticles (Au DSNPs) were formed by simply mixing the PC modified amine-terminated fifth-generation PAMAM dendrimers (G5-PC) with AuCl₄ ⁻ ions by controlling the pH, no additional reducing agents or other stabilizers were needed. The obtained Au DSNPs were shown to be spherical, with particle diameters ranging from 5 to 12 nm, the sizes and growth kinetics of Au DSNPs could be tuned by changing the pH and the initial molar ratio of dendrimers to gold as indicated by transmission electron microscopy (TEM) and UV–Vis data. The prepared Au DSNPs showed excellent stability including: (1) stable at wide pH (7–13) values; (2) stable at high salt concentrations up to 2 M NaCl; (3) non-specific protein adsorption resistance. More importantly, surface functionalization could be performed by introducing desired functional groups onto the remained reactive amine groups. This was exemplified by the glucose conjugation. The glucose conjugated Au DSNPs showed bio-specific interaction with Concanavalin A (Con A), which induced aggregation of the Au NPs. Colorimetric detection of Con A based on the plasmon resonance of the glucose conjugated Au DSNPs was realized. A limit of detection (LOD) for Con A was 0.6 μM, based on a signal-to-noise ratio (S/N) of 3. These findings demonstrated that the PC modified Au DSNPs could potentially serve as a versatile nano-platform for the biomedical applications.     

Sonication-assisted layer-by-layer deposition of gold nanoparticles for highly conductive gold patterns

Sonication-assisted layer-by-layer (LBL) deposition of gold nanoparticles (GNPs) was carried out in an attempt to prepare highly conductive gold patterns on polyimide substrates. First, sonication time was optimized with GNPs (12.8 nm) whose size was large enough to be analyzed by FE-SEM in order to evaluate the surface coverage. Next, multilayer formation (4, 8 and 12 layer) was confirmed using ethanedithiol (EDT) as linker molecules under optimized conditions by measuring their UV absorption, near-IR (NIR) transmittance, thickness, and electrical conductivity. Finally, 20-layer films using small GNPs (2.5 nm) were prepared with or without patterning, followed by sintering at 150 °C for 1 h, which provided clean gold patterns with high electrical conductivity (2.5 × 10⁵ Ω⁻¹ cm⁻¹).     

Catalytically active gold clusters and nanoparticles for CO oxidation

Electronic states of gold nanoparticles in mordenite and their transformations under redox treatments have been studied by the methods of FTIR spectroscopy of adsorbed CO and diffuse reflectance UV-visible spectroscopy. Different states of ionic and metallic gold were detected in the zeolite channels and on the external surface of the zeolite - Au⁺ and Au³⁺ ions, charged clusters , and neutral nanoparticles Au_m. Catalytic tests of the samples revealed the existence of two types of active sites of gold in CO oxidation - gold clusters <2 nm (low-temperature activity) and gold nanoparticles (high temperature activity).     

Shape evolution of gold nanoparticles

The tetraoctylammonium bromide-stabilized gold nanoparticles have been successfully fabricated. The shape evolution of these nanoparticles under different annealing temperatures has been investigated using high-resolution transmission electron microscopy. After an annealing at 100 °C for 30 min, the average diameters of the gold nanoparticles change a little. However, the shapes of gold nanoparticles change drastically, and facets appear in most nanoparticles. After an annealing at 200 °C for 30 min, not only the size but also the shape changes a lot. After an annealing at 300 °C for 30 min, two or more gold nanoparticles coalesce into bigger ones. In addition, because of the presence of Cu grid during the annealing, some gold particles become the nucleation sites of Cu₂O nanocubes, which possess a microstructure of gold-particle core/Cu₂O shell. These Au/Cu₂O heterostructure nanocubes can only be formed at a relatively high temperature (≥300 °C). The results can provide some insights on controlling the shapes of gold nanoparticles.     

Ripening of nanowire-supported gold nanoparticles

Gold nanoparticles have applications ranging from catalysts for low temperature oxidation of CO to solar energy capture in the infrared. For all these applications, particle size and shape are critical. In this study, nanoparticle gold formed on GaN nanowires by plasma-enhanced chemical vapor deposition was annealed at temperatures ranging from 150 to 270 °C for 24 h. Particle size was measured before and after annealing using a field emission scanning electron microscope. Ripening of the gold particles was observed even at the lowest annealing temperatures of the study. The particle growth kinetics showed an Arrhenius relationship with activation energy of 27.38 kJ/mol. This value suggests that ripening occurs by particle migration and coalescence rather than adatom diffusion.     

Anisotropic gold nanoparticles and gold plates biosynthesis using alfalfa extracts

Industrial and medical applications for gold nanoparticles are extensive, yet highly dependent on their chemical and structural properties. Thus, harnessing the size and shape of nanoparticles plays an important role in nanoscience and nanotechnology. Anisotropic polyhedra and nanoplates were biosynthesized via reduction of 3 mM AuCl₄ ⁻ solution at room temperature. Alfalfa biomass extracts prepared in water and in isopropanol separately were used as reducing agents at pH 3.5 and 3.0, respectively. Nanoparticles observed in the isopropanol extract presented a size range of 30–60 nm, and the morphologies present included 30 nm decahedra and 15 nm icosahedra. Gold nanoplates produced in the water extract were mainly triangular, ranging from 500 nm to 4 μm in size. The resulting nanoparticles and nanoplates can be potentially used in the study of their unique physical properties and for the mechanisms of formation using alfalfa biomass extracts.     

Trapping and release of citrate-capped gold nanoparticles

An electrical method to trap and release charged gold nanoparticles onto and from the surface of gold electrodes modified by an alkanethiol self-assembled monolayer (SAM) is presented. To form electrodes coated with gold nanoparticles (GNPs), amine-terminated SAMs on gold electrodes were immersed in a solution of negatively charged citrate-capped GNPs. Accumulation of GNPs on the electrode surface was monitored by a decrease in the impedance of the SAM-modified electrode and by an increase in the electrochemical activity at the electrode as shown through cyclic voltammetry (CV). Electrostatic interactions between the GNPs and the amine-terminated SAM trap the GNPs on the electrode surface. Application of a subsequent negative bias to the electrode initiated a partial release of the GNPs from the electrode surface. Impedance spectroscopy, cyclic voltammetry, ultraviolet-visible (UV-Vis) spectroscopy and atomic force microscopy (AFM) were used to monitor and confirm the attraction of GNPs to and release from the aminealkanethiolated gold electrodes. This work describes a method of trapping and release for citrate-capped GNPs that could be used for on-demand nanoparticle delivery applications such as in assessing and modeling nanoparticle toxicology, as well as for monitoring the functionalization of gold nanoparticles.     

Ultrasonic-assisted spark plasma discharge for gold nanoparticles synthesis

We examine the ultrasonic-assisted spark discharge in gold nanoparticles production. A 1 kHz pulsed power supply is used to generate spark discharge plasma. The appropriate range of peak power (pulse peak current) for nanoparticles production was determined by the Dynamic Light Scattering (DLS) method. Colloidal gold nanoparticles were synthesized in 100 mL deionized water and pure ethanol as liquid dielectrics. Scanning Electron Microscopy (SEM) micrographs show that the nanoparticles diameter in the deionized water is larger than in pure ethanol. Transmission Electron Microscopy (TEM) micrographs of the gold nanoparticles also confirm the SEM results with more accuracy. The present study revealed that the ultrasonic wave increases the shape uniformity of the nanoparticles and decreases their size.     

Structure and bonding in gold compounds

Recent developments in chemical applications of¹⁹⁷Au Mössbauer spectroscopy are reviewed. For gold(I) and gold(III), systematic variations in isomer shift and quadrupole splitting are seen as the ligands are changed; the effects of change in coordination number of the gold atoms are also systematic. Data for gold(II) systems involving gold-gold bonds lie between those for corresponding gold(I) and gold(III) materials, showing a small increase in isomer shift and a larger increase in quadrupole splitting as the oxidation state decreases; these trends are explained in terms of the structures. Data for mixed-metal cluster compounds are much more sensitive to structural effects than in homonuclear clusters. Both sets of data show systematic changes with increase in the number of metal atoms to which the gold atom is bound. The connectivity also influences the recoil-free fraction.     

Photochemical synthesis of polygonal gold nanoparticles

In this paper, we propose a method to generate gold nanoparticles capable of absorbing near infrared light (NIR) radiation through a photochemical reaction. This approach does not require the use of either surfactants or polymers, reducing the difficulties that may arise in further chemical modifications for the gold nanoparticles. The gold nanoparticles with either triangular or hexagonal shapes were generated using the photo-reduction method, mixing hydrogen tetrachloroaurate with sodium oxalate, a reducing agent, in aqueous solution under illumination of a mercury lamp (λ_max = 306 nm) for more than 10 min. The size of the gold nanoparticles varies from 25 to 200 nm, which mainly depends on the duration of light illumination and the concentration of sodium oxalate. Furthermore, we demonstrate that the presence of the gold nanoparticles in aqueous solutions can effectively elevate the temperature of the solutions under irradiation of NIR light (808 nm) within a few minutes. The gold nanoparticles can be potentially used as suitable photothermal agents for hyperthermia.     

Agglomeration behavior of lipid-capped gold nanoparticles

The current investigation deciphers aggregation pattern of gold nanoparticles (AuNPs) and lipid-treated AuNPs when subjected to aqueous sodium chloride solution with increasing ionic strengths (100–400 nM). AuNPs were synthesized using 0.29 mM chloroauric acid and by varying the concentrations of trisodium citrate (AuNP1 1.55 mM, AuNP2 3.1 mM) and silver nitrate (AuNP3 5.3 μM, AuNP4 10.6 μM) with characteristic LSPR peaks in the range of 525–533 nm. TEM analysis revealed AuNPs to be predominantly faceted nanocrystals with the average size of AuNP1 to be 35?±?5 nm, AuNP2 15?±?5 nm, AuNP3 30?±?5 nm, and AuNP4 30?±?5 nm and the zeta-average for AuNPs were calculated to be 31.23, 63.80, 26.08, and 28 nm respectively. Induced aggregation was observed within 10 s in all synthesized AuNPs while lipid-treated AuNP2 (AuNP2-L) was found to withstand ionic interferences at all concentration levels. However, lipid-treated AuNPs synthesized using silver nitrate and 1.55 mM trisodium citrate (AuNP3, AuNP4) showed much lower stability. The zeta potential values of lipid-treated AuNPs (AuNP1-L-1x/200, ??17.93?±?1.02 mV; AuNP2-L-1x/200, ??21.63?±?0.70; AuNP3-L-1x/200, ??14.54?±?0.90; AuNP3-L-1x/200 ??13.77?±?0.83) justified these observations. To summarize, AuNP1 and AuNP2 treated with lipid mixture 1 equals or above 1x/200 or 1x/1000 respectively showed strong resistance against ionic interferences (up to 400 mM NaCl). Use of lipid mixture 1 for obtaining highly stable AuNPs also provided functional arms of various lengths which can be used for covalent coupling.

Open image in new window

Graphical abstract Agglomeration behavior of gold nanoparticles before and after lipid capping

     

Chemical composition of surface-functionalized gold nanoparticles

The composition of surface-functionalized gold nanoparticles (diameter of the metallic core: 17–20 nm) was determined by elemental analysis (C, H, N, S, Au, Na) after preparation of a larger batch. Gold nanoparticles were prepared and functionalized with citrate according to the classical Turkevich method. The citrate-functionalized nanoparticles contained about 3.1 wt% of organic material (135 ng cm⁻² or 3.1 molecules nm⁻²). A partial exchange of citrate was accomplished by tris(sodium-m-sulfonato-phenyl)phosphine (TPPTS) which led to 2.1 wt% of citrate (90 ng cm⁻² or 2.1 molecules nm⁻²) and 1.4 wt% TPPTS (61 ng cm⁻² or 0.6 molecules nm⁻²). The citrate coating was quantitatively exchanged by poly(N-vinyl pyrrolidone) (PVP) after immersion in solutions with concentrations of 33, 66 and 128 mg L^-1, respectively, leading to contents of 4 to 6 wt% of PVP (171–271 ng cm⁻² or 9–15 PVP monomer units nm⁻²).     

芯帽纳米颗粒的光热性质

贵金属纳米结构中的光热效应在肿瘤光热治疗、光热成像、纳米药物等领域具有重要的应用价值.各向异性的芯帽纳米结构以其丰富的可调结构参数和对激发光偏振态敏感的特性,可灵活地在近红外波段获得理想的光学吸收性质,从而可以实现温度的高效调节.本文基于有限元方法研究了颗粒物纳米结构参数对其光热效果的作用规律,数值结果表明:通过对结构参数的微量改变(包括金壳厚度、芯壳比、芯径、金属表面覆盖率等)可实现温度的显著调整;在偏振态的旋转范围(30?—70?)内可快速地产生大温变光热的准线性调整.其不弱于纳米芯壳和纳米棒结构的光热性能可为纳米光热生医研究提供一种新的选择.     

Monofunctional gold nanoparticles: synthesis and applications

The ability to control the assembly of nanoparticle building blocks is critically important for the development of new materials and devices. The properties and functions of nanomaterials are not only dependent on the size and properties of individual particles, but also the interparticle distance and interactions. In order to control the structures of nanoassemblies, it is important to first achieve a precise control on the chemical functionality of nanoparticle building blocks. This review discusses three methods that have been reported recently for the preparation of monofunctional gold nanoparticles, i.e., nanoparticles with a single chemical functional group attached to each particle. The advantages and disadvantages of the three methods are discussed and compared. With a single functional group attached to the surface, one can treat such nanoparticles as molecular building blocks to react with other molecules or nanoparticles. In other words, by using appropriate chemical reactions, nanoparticles can be linked together into nanoassemblies and materials by covalent bonds, similar to the total chemical synthesis of complicated organic compounds from smaller molecular units. An example of using this approach for the synthesis of nanoparticle/polymer hybrid materials with optical limiting properties is presented. Other potential applications and advantages of covalent bond-based nanoarchitectures vs. non-covalent interaction-based supramolecular self-assemblies are also discussed briefly in this review.     

Plasmon-resonant gold nanoparticles for cancer optical imaging

Gold nanoparticles(AuNPs) interact with light and have strong and tunable surface plasmon resonance,which can be detected using multiple imaging modalities.These provide an unique opportunity for their potential applications in optical imaging for early detection of cancer.In this review,we summarized nanoparticles targeting properties for cancer,plasmon optical properties of AuNPs,application of AuNPs for cancer optical imaging.Also discussed is the safety of AuNPs.     

Hydrophobically modified chitosan/gold nanoparticles for DNA delivery

Present study dealt an application of modified chitosan gold nanoparticles (Nac-6-Au) for the immobilization of necked plasmid DNA. Gold nanoparticles stabilized with N-acylated chitosan were prepared by graft-onto approach. The stabilized gold nanoparticles were characterized by different physico-chemical techniques such as UV-vis, TEM, ELS and DLS. MTT assay was used for in vitro cytotoxicity of the nanoparticles into three different cell lines (NIH 3T3, CT-26 and MCF-7). The formulation of plasmid DNA with the nanoparticles corresponds to the complex forming capacity and in-vitro/in-vivo transfection efficiency was studied via gel electrophoresis and transfection methods, respectively. Results showed the modified chitosan gold nanoparticles were well-dispersed and spherical in shape with average size around 10～12 nm in triple distilled water at pH 7.4, and showed relatively no cytotoxicity at low concentration. Addition of plasmid DNA on the aqueous solution of the nanoparticles markedly reduced surface potential (50.0～66.6%) as well as resulted in a 13.33% increase in hydrodynamic diameters of the formulated nanoparticles. Transfection efficiency of Nac-6-Au/DNA was dependent on cell type, and higher β-galactosidase activity was observed on MCF-7 breast cancer cell. Typically, this activity was 5 times higher in 4.5 mg/ml nanoparticles concentration than that achieved by the nanoparticles of other concentrations (and/or control). However, this activity was lower in in-vitro and dramatically higher in in-vivo than that of commercially available transfection kit (Lipofectin®) and DNA. From these results, it can be expected to develop alternative new vectors for gene delivery.     

Electronic structure and optical properties of gold nanoparticles

Based on nonempirical calculations of the Au₃₂ cluster, it is found that excited states from which only the quadrupole transition to the ground state is possible arise upon excitation of gold nanoparticles by photons with energies exceeding the minimum energy gap between occupied and vacant states. The possible role of such transitions in lasing of the nanoscale laser called the spaser is discussed.     

Laser-induced growth and reformation of gold and silver nanoparticles

The sizes, shapes, and growth rates of gold and silver nanoparticles stabilized with polyvinylpyrrolidone in water can be controlled by using picosecond laser pulses. The nucleation of small metal clusters formed with NaBH₄ addition to produce nanoparticles takes two months with aging but 30 min with laser irradiation. Laser pulses can also induce nanoparticles to have narrow size and shape distribution or to undergo aggregation into much larger particles. The latter process is more likely found when the metal is silver or the irradiation wavelength is short. Laser-induced growth and shape transformation processes are explained in terms of BH₄ ⁻ depletion, metal fusion, and electron ejection followed by disintegration.     

Fluorescence quenching using plasmonic gold nanoparticles

This communication describes the study of fluorescence quenching in a new fluorescent laser dye ADS680HO is attached to gold nanoparticles of size 4-12 nm. Photo physical properties confirms that it is due to size, shape, coupling between nanoparticles with laser dye ADS680HO, and energy transfer between dye and nanoparticles. Fluorescence quenching leads to advancement in biomolecular labeling and fluorescence patterning.