Development of <Superscript>177</Superscript>Lu-DOTA-anti-CD20 for radioimmunotherapy

Rituximab was successively labeled with ¹⁷⁷Lu-lutetium chloride. ¹⁷⁷Lu chloride was obtained by thermal neutron flux (4 × 10¹³ n cm⁻² s⁻¹) of natural Lu₂O₃ sample with a specific activity of 2.6–3 GBq/mg. The macrocyclic bifunctional chelating agent, N-succinimidyl-1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid (DOTA-NHS) was prepared at 25 °C using DOTA, N-hydroxy succinimide (NHS) in CH₂Cl₂. DOTA-rituximab was obtained by the addition of 1 mL of a rituximab pharmaceutical solution (5 mg/mL, in phosphate buffer, pH 7.8) to a glass tube pre-coated with DOTA-NHS (0.01–0.1 mg) at 25 °C with continuous mild stirring for 15 h. Radiolabeling was performed at 37 °C in 24 h. Radio-thin layer chromatography showed an overall radiochemical purity of >98% at optimized conditions (specific activity = 444 MBq/mg, labeling efficacy; 82%). The final isotonic ¹⁷⁷Lu-DOTA-rituximab complex was checked by gel electrophoresis for structure integrity control. Radio-TLC was performed to ensure that only one species was present after filtration through a 0.22 μm filter. Preliminary biodistribution studies in normal rats were carried out to determine complex distribution of the radioimmunoconjugate up to 168 h. The biodistribution data were in accordance with other antiCD20 radioimmunoconjugates already reported.     

Plasticity and robustness of protein patterns during reversible development in the honey bee (<Emphasis Type="Italic">Apis mellifera</Emphasis>)

With age, worker honey bees normally proceed from performing activities inside the nest to foraging in the field, creating an age-related division of labor. We previously established that the whole-body protein profiles of nest workers and foragers are different, and proposed that this proteomic divergence in part is explained by a shift in metabolic requirements as worker bees initiate intense flight. The unique plasticity of honey bee worker ontogeny, however, provides further opportunities to investigate if such changes in the proteome are dynamic or, alternatively, are permanently induced. Through manipulation of the social structure of colonies, foragers can be forced to revert to nest tasks, and in the current study we investigate how protein profiles respond to such reverse development. By using a quantitative LC-MS/MS-based approach in conjunction with robust statistical validation we show that after reversal from foraging to nest activities, subsets of proteins are detected at relative concentrations that characterize nest bees, whereas other proteins remain unchanged at relative concentrations normally found in foragers. In all, we quantified the levels of 81 proteins, and for 22 of these we found significant differences between worker groups before and after reversion. We interpret these patterns as examples of plasticity and robustness at the proteome level that are linked to characteristics of behavior and aging in Apis mellifera. Figure Quantitative LC-MS/MS in conjunction with robust statistical validation reveals plasticity and robustness of protein patterns during reversible development in the honey bee (Apis mellifera) Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Kinetic study of crystallization of PHB in presence of hydroxy acids

Poly(3-hydroxybutyrate), PHB, has been structurally modified through reaction with hydroxy acids (HA) such as tartaric acid (TA) and malic acid (MA). The crystallization kinetic of the samples was evaluated by isoconversional method through nonlinear fitting to obtain the estimation for activation energy (E _a ) and pre-exponential (A) values. The thermal behavior of the crystallization temperature, 44.8 and 58.9 °C at 5 °C/min, and results obtained to the average activation energy, 73 ± 9 kJ mol⁻¹ and 63 ± 1 kJ mol⁻¹, to PHB/MA and PHB, respectively, are suggesting that malic acid may be deriving plasticizer units from its own PHB chain. PHB/TA show increase in the medium value of E _a, 119 ± 2 kJ mol⁻¹ and T _c = 48.2 °C (at 5 °C/min), indicating that tartaric acid is probably interacts in different way to the of PHB chain (E _a=73 ± 9 kJ mol⁻¹, T _c = 44.8 °C at 5 °C/min).     

High Level Expression of an Acid-Stable Phytase from <Emphasis Type="Italic">Citrobacter freundii</Emphasis> in <Emphasis Type="Italic">Pichia pastoris</Emphasis>

To obtain a high level expression of phytase with favorable characteristics, a codon-optimized phytase gene from Citrobacter freundii was synthesized and transferred into Pichia pastoris. Small-scale expression experiments and activity assays were used to screen positive colonies. After purified by Ni²⁺–NTA agarose affinity column, the characterizations of the recombinant phytase were determined. The recombinant phytase (r-phyC) had two distinct pH optima at 2.5 and 4.5 and an optimal temperature at 50 °C. It retained more than 80% activity after being incubated under various buffer (pH 1.5–8.0) at 37 °C for 1 h. The specific activity, Km, and Vmax values of r-phyC for sodium phytate were 2,072 ± 18 U mg⁻¹, 0.52 ± 0.04 mM, and 2,380 ± 84 U mg⁻¹ min⁻¹, respectively. The enzyme activity was significantly improved by 1 mM of K⁺, Ca²⁺, and Mg²⁺. These characteristics contribute to its potential application in feed industry.     

Radio labeling,quality control and biodistribution of <Superscript>99m</Superscript>Tc-cefotaxime as an infection imaging agent

Cefotaxime, a cephalosporin antibiotic, used to treat bacterial infections was investigated to label with ^99mTc. Labeling was performed using sodium dithionite as a reducing agent at 100 °C for 10 min and radiochemical analysis involved ITLC and HPLC methods. The stability of labeled antibiotic was checked in the presence of human serum at 37 °C up to 24 h. The maximum radiolabeling yield was 92 ± 2%. Bacterial binding assay was performed with S. aureus and the in vivo distribution was studied in mice. Images showed minimal accumulation in non-target tissues, with an average target/non-target ratio of 2.89 ± 0.58.     

Fully automated radiosynthesis of [<Superscript>18</Superscript>F]Fluoromisonidazole with single neutral alumina column purification: optimization of reaction parameters

1-H-1-(3-[¹⁸F]fluoro-2-hydroxypropyl)-2-nitroimidazole ([¹⁸F]FMISO), is the most used hypoxia-imaging agent in oncology and we have recently reported a fully automated procedure for its synthesis using the Nuclear Interface FDG module and a single neutral alumina column for purification. Using 1-(2′-nitro-1′-imidazolyl)-2-O-tetra-hydropyranyl-3-O-toluenesulfonylpropanediol (NITTP) as the precursor, we have investigated the yield of [¹⁸F]FMISO using different reaction times, temperatures, and the amount of precursor. The overall yield was 48.4 ± 1.2% (n = 3), (without decay correction) obtained using 10 mg NITTP with the radio-fluorination carried out at 145 °C for 3 min followed by acid hydrolysis for 3 min at 125 °C in a total synthesis time of 32 ± 1 min. Increasing the precursor amount to 25 mg did not improve the overall yield under identical reaction conditions, with the decay uncorrected yield being 46.8 ± 1.6% (n = 3), but rather made the production less economical. It was also observed that the yield increased linearly with the amount of NITTP used, from 2.5 to 10 mg and plateaued from 10 to 25 mg. Radio-fluorination efficiency at four different conditions was also compared. It was also observed by radio thin layer chromatography (radio-TLC) that the duration of radio-fluorination of NITTP, not the radio-fluorination temperature favoured the formation of labeled thermally degraded product, but the single neutral alumina column purification was sufficient enough to obtain [¹⁸F]FMISO devoid of any radiochemical as well as cold impurities.     

Interactions of 2,2,2‐trifluoroethanol with melittin

Melittin dissolved in 42% trifluoroethanol‐water at pH 2 has been shown to be α‐helical between residues 6 and 12 and between residues 13 and 25, with the two helical regions separated by a bend at the Leu13 residue. The inter‐helix angle was found to be 154 ± 3° at 0 °C and 135 ± 3° at 25 °C. The dominant conformation of the peptide is thus similar to those observed by previous workers for the peptide in a variety of media. At 25 °C, intermolecular nuclear Overhauser effects arising from nuclear spin dipole‐dipole interactions between melittin hydrogens and fluorines of the solvent are essentially those expected for a system that is homogeneous as regards concentration and translational diffusion of the peptide and fluoroalcohol components. However, at 0 °C, peptide‐trifluoroethanol cross‐relaxation terms are negative, a result consistent with the conclusion that fluoroalcohol molecules associate with the peptide for times (～1 ns) that are long compared to the time of a typical peptide‐fluoroalcohol diffusive encounter (～0.2 ns). Such interactions may be responsible for the reduction of the translational diffusion coefficient of trifluoroethanol produced by dissolved peptides. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and properties of poly(isosorbide 2,5-furandicarboxylate-co-ε-caprolactone) copolyesters

Bio-based poly(isosorbide 2,5-furandicarboxylate-co-ε-caprolactone) (PIFCL) copolyesters were synthesized from 2,5-furandicarboxylic acid, isosorbide and ε-caprolactone. The obtained copolyesters were characterized by ¹H NMR, ¹³C NMR, intrinsic viscosity, GPC, DSC, TGA and tensile testing. The NMR characterization results confirmed the insertion of lactones units into poly(isosorbide 2,5-furandicarboxylate) (PIF) chains. All PIFCL copolyesters were amorphous with T_{D, 5%} higher than 300 °C. The glass transition temperatures of PIFCLs with FDCA molar ratio from 74% to 45% were within the range of 132.1 °C and 72.4 °C. Tensile testing revealed that introduction of ε-caprolactone into PIF chain imparted PIFCL with excellent mechanical performance, typically, PIFCL polyseter with FDCA molar ratio of 45% had a Young's modulus 858 ± 92 MPa, a tensile strength 44 ± 4 MPa and an elongation at break 480 ± 45%.     

Recoverable and thermally stable superhydrophobic silica coating

A facile route to methyltrimethoxysilane (MTMS) based recoverable superhydrophobic silica coatings with dual-scale roughness obtained through the single step base catalyst sol–gel process. Superhydrophobic silica coatings have shown static water contact angle near about 170 ± 1° and dynamic water contact angle up to 2 ± 1°. Superhydrophobic-superhydrophilic switching feature also achieved by alternating heat treatment and bath surface modification with Trimethylchlorosilane (TMCS) at room temperature (26 °C). Furthermore, the superhydrophobic state could be transformed into superhydrophilic state by slow rate heat treatment. These studies present a very simple strategy for the fabrication of recoverable superhydrophobic surfaces.     

Determination of tryptophan in bee pollen and royal jelly by high‐performance liquid chromatography with fluorescence detection

A method for tryptophan analysis in bee pollen and royal jelly was developed using HPLC with fluorescence detection. To determine the free tryptophan in bee pollen and royal jelly, ultrasonic extraction was performed using water (pH 6.3)–acetonitrile (10:1, v/v) as extraction solvent. While determining the total tryptophan in these bee products, the method involves alkaline hydrolysis of the proteins with 4 mol/L sodium hydroxide at 110°C for 20 h under anaerobic conditions. The operating conditions for the HPLC analysis were: Symmetry C₁₈ column (4.6 × 250 mm, 5 µm), 0.1% trifluoroacetic acid–methanol (75:25, v/v) as the mobile phase at a flow rate of 1.0 mL/min at 30°C. The fluorescence detector was operated at an excitation wavelength of 280 nm and an emission wavelength of 340 nm. A linear response (r² > 0.9998) was obtained in the range 0.0625–5.0 µg/mL. The method was successfully applied to the determination of the free and total tryptophan contents in bee pollens, which were 0.069 ± 0.003 and 2.693 ± 0.476 mg/g, respectively, while only the total tryptophan was detected in royal jelly, with a content of 1.743 ± 0.066 mg/g. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and evaluation of a new bombesin analog labeled with <Superscript>99m</Superscript>Tc as a GRP receptor imaging agent

Tumors such as prostate, small cell lung cancer, breast, gastric and colon cancer are known to overexpress receptors to bombesin (BBN). In this study, a new bombesin analogue was labeled with ^99mTc via HYNIC and tricine/EDDA as coligands and investigated further. HYNIC-GABA-Bombesin (7–14) NH₂ was synthesized using a standard Fmoc strategy. Labeling with ^99mTc was performed at 100 °C for 10 min and radiochemical analysis involved ITLC and HPLC methods. The stability of radiopeptide was checked in the presence of humane serum at 37 °C up to 24 h. The receptor bound internalization and externalization rates were studied in GRP receptor expressing PC-3 cells. Biodistribution of radiopeptide was studied in nude mice bearing PC-3 tumor. Labeling yield of >98% was obtained corresponding to a specific activity of ~2.6 MBq/nmol. Peptide conjugate showed good stability in the presence of human serum. The radioligand showed high and specific internalization into PC-3 cells (14.63 ± 0.41% at 4 h). In biodistribution studies, a receptor-specific uptake was observed in GRP-receptor-positive organs so that after 4 h the uptakes in mouse tumor and pancreas were 1.31 ± 0.18 and 1.2 ± 0.13% ID/g, respectively.     

Application of Artificial Neural Network and Particle Swarm Optimization for modelling and optimization of biosorption of Lead(II) and Nickel(II) from wastewater using dead cyanobacterial biomass

Removal of heavy metals through biosorption using biomass offers several advantages over other conventional techniques such as low cost, high efficiency, environmentally friendly, etc. In the present article, biosorption of Nickel(II) and Lead(II)was investigated using dried biomass of cyanobacterial consortium. OFAT (one-factor-at-a-time) analysis was used to assess the effect of input parameters on the removal of potentially toxic elements by varying initial metal ion concentration (2–10 mgL⁻¹), adsorbent dose (0.1–1.0 gL^-1), pH (for Pb(II): 2–6, for Ni(II): 2–8) and temperature (25°C–45°C) individually, at constant shaking speed of 150 ​rpm. Results showed that removal using biomass attained highest values in as short time as 15 ​min. The investigations also showed the removal is highly effective at lower initial concentrations of heavy metals. Maximum removal of Lead(II) (87.27 ​± ​1.75%) and Nickel(II) (92.57 ​± ​0.77%) was obtained at pH 6 and 45°C and at pH 7 and 25°C, respectively, within 15 ​min with 0.1 gL^-1 biomass. Both the Langmuir model and Freundlich model were seen to fit the equilibrium data. Further, Artificial Neural Network was used to model the biosorption process. Subsequently, Particle Swarm Optimization was applied to optimize the operating conditions for the removal of both the metals.     

Standardisation of cooking and conditioning methods for preparation of quick cooking germinated brown rice

Quick cooking germinated brown rice (QCGBR) is a novel convenient food product with valuable health benefits. Different cooking and conditioning methods were studied for standardisation of its preparation process. Freshly harvested paddy of Prativa variety was milled in rubber roll sheller to get brown rice which was soaked in demineralised water at 30 ​± ​2 ​°C for 12 ​h followed by 24 ​h of germination in an incubator maintained at 27 ​± ​1 ​°C temperature and 85–90% relative humidity to obtain germinated brown rice. The germinated brown rice was immediately cooked using three different cooking methods such as atmospheric cooking at normal ambient pressure, pressure cooking with water in a domestic pressure cooker at 1 ​bar gauge pressure and pressure steaming (without water) with steam at 1 ​bar gauge pressure to predetermined cooking time. The cooked samples after washing were then conditioned by keeping them at 4 ​°C for 24 ​h (refrigerated storage) or −10 ​°C for 24 ​h (frozen storage) in a house hold refrigerator. The stored samples were taken out after 24 ​h and tempered for 1 ​h followed by drying in a tray dryer at 90 ​°C to obtain the quick cooking germinated brown rice. The samples obtained from different cooking and conditioning methods were analysed for cooking quality, physico-chemical parameters, damaged grain percentage, GABA content and sensory attributes to standardise the cooking and conditioning methods. Cooking time, water uptake ratio, solid loss and volume expansion ratio of quick cooking germinated brown rice varied significantly with cooking and conditioning methods of its preparation (p ​< ​0.05). Though frozen conditioning resulted in lowest cooking time, it was not accepted by the sensory panel due to high damaged grain percentage, distorted shape and softness after cooking. The QCGBR obtained by pressure cooking method followed by refrigerated conditioning resulted in highest sensory score.     

Cloning,Expression, and Characterization of a Wide-pH-Range Stable Phosphite Dehydrogenase from <Emphasis Type="Italic">Pseudomonas</Emphasis> sp. K in <Emphasis Type="Italic">Escherichia coli</Emphasis>

A phosphite dehydrogenase gene (ptdhK) consisting of 1,011-bp nucleotides which encoding a peptide of 336 amino acid residues was cloned from Pseudomonas sp. K. gene ptdhK was expressed in Escherichia coli BL21 (DE3) and the corresponding recombinant enzyme was purified by metal affinity chromatography. The recombinant protein is a homodimer with a monomeric molecular mass of 37.2 kDa. The specific activity of PTDH-K was 3.49 U mg⁻¹ at 25 °C. The recombinant PTDH-K exhibited maximum activity at pH 3.0 and at 40 °C and displayed high stability within a wide range of pHs (5.0 to 10.5). PTDH-K had a high affinity to its natural substrates, with K _m values for sodium phosphite and NAD of 0.475 ± 0.073 and 0.022 ± 0.007 mM, respectively. The activity of PTDH-K was enhanced by Na⁺, NH₄⁺, Mg²⁺, Fe²⁺, Fe³⁺, Co²⁺, and EDTA, and PTDH-K exhibited different tolerance to various organic solvents.     

Kinetics of cordierite crystallization from diphasic gels

Diphasic cordierite gels were prepared from colloidal silica, aluminum and magnesium nitrates and citric acid. The mechanism of xerogel decomposition was studied by infrared spectroscopy (FT-IR) and thermal gravimetric analysis (TGA). The thermal decomposition of the xerogel forms a solid mixture of MgO, Al₂O₃ and SiO₂ at around 250 °C. Cordierite crystallization was studied by X-ray diffraction (XRD) and differential thermal analysis (DTA). Xerogels were initially thermally treated, and this sample crystallized to μ-cordierite at 850 °C, at 900 °C α-cordierite crystallizes and at 1150 °C α-cordierite is the major phase and μ-cordierite is totally consumed. The apparent activation energy for cordierite crystallization process was determined based on the Johnson-Mehl-Avrami-Kolmogorov (JMAK) theory, Ligero methods and the Arrhenius law for dependence of activation energy with temperature. The apparent activation energy was (466.8 ± 34.3) kJ/mol, the exponent of Avrami was (1.9 ± 0.2) and the frequency factor was (1.55 × 10²⁰) s⁻¹. The Avrami value indicates a nucleation controlled process, which can be a consequence of the high xerogel homogeneity, a consequence of the early and simultaneous formation of the MgO, Al₂O₃ and SiO₂ mixture.     

The melting behaviour of poly(3-hydroxybutyrate) by DSC. Reproducibility study

This work is concerned with the melting behaviour and accuracy of differential scanning calorimeter (DSC) analyses of poly(3-hydroxybutyrate) (PHB), a semi-crystalline thermoplastic polymer completely biodegradable and biocompatible, and obtained from renewable resources. Melting parameters of PHB were determined for the first fusion event applying standard experimental procedures for thermal analysis, using heating rates ranging between 1 °C/min and 20 °C/min. The analyses of DSC energy flow scans showed a complex melting peak that may be resolved into three elementary peaks having different intensities at different melting temperatures. Peak temperatures depend on heating rate, while the total crystallinity detected was independent of the rate. A study of 24 DSC runs showed good temperature reproducibility (±0.5 °C), but poor reproducibility of mass crystallinity (±10%).     

Interfacial mutations in the Al‐polyimide system

Understanding the thermal stability of metal‐polymer interfaces is essential for the reliability of innovative high‐tech devices, including flexible electronics or satellite insulation. In this study, the interfacial stability of aluminum‐polyimide (Al‐PI) is investigated as a function of thermal cycling (±150°C) and thermal annealing treatments (150°C‐300°C) with X‐ray photoelectron spectroscopy measurements performed after peeling and cross‐sectional transmission electron microscopy analysis. Small mutations in the interface chemistry and structure were detected and identified after annealing at 225°C for 140 hours, including the thickness increase of an amorphous interlayer between Al and PI of about 2 nm and a change in the failure mechanism during the peeling. Being able to trace subcritical mutations before they become fatal is essential to predict the reliability and lifetime of metal‐polymer composites.     

Solid state of a new COX-2 inhibitor CG100649

CG100649 [4-(3-(3-Fluorophenyl)-5,5-dimethyl-4-oxo-4,5-dihydrofuran-2-yl)-benzenesulfonamide, polmacoxib, Acelex™] is a new NSAID used to treat osteoarthritis. It inhibits the enzymes carbonic anhydrase and COX-2. The objective of this work was to investigate the existence of polymorphs of CG100649 and the solubility of different crystal forms of CG100649. Four crystal forms of CG100649 (Forms 1–4) have been isolated by recrystallization and characterized by differential scanning calorimetry and powder X-ray diffractometry. In dissolution studies in pH 6.8 ± 0.05 buffer at 37 ± 0.5 °C, the solubility of Form 1 was the highest, and the dissolution rate at 30 min in water decreased in rank order: Form 3 > Form 2 > Form 4. After storage for one month at 2 °C and 24% relative humidity, all crystal forms were not transformed.

     

Differential scanning calorimetry study of blood serum in chronic obstructive pulmonary disease

Differential scanning calorimetry (DSC) has been applied for studies of blood serum from patients sick with chronic obstructive pulmonary disease (COPD). The denaturation of serum proceeds as endothermic process over the temperature range 45–85 °C. Distinct changes in the shape of DSC curves have been observed for serum from patients with severe stage of COPD (treated with inhaled corticosteroids) relative to serum from healthy individuals. The first moment of the thermal transition with respect to the temperature axis shifts from the normal value of 63.9 ± 0.3 to 65.3 ± 0.7 °C and to 67.6 ± 1.6 °C for early and advanced stages of disease, respectively. The results of our studies suggest age dependence of blood serum denaturation transition.     

Production and Characterization of an Alkaline Thermostable Crude Lipase from an Isolated Strain of <Emphasis Type="Italic">Bacillus cereus</Emphasis> C<Subscript>7</Subscript>

A bacterial strain isolated from spoiled coconut and identified as Bacillus cereus was found capable of producing alkaline thermostable extracellular lipase. Optimum temperature, time, and pH for enzyme substrate reaction were found to be 60 °C, 10 min, and 8.0 respectively. Common surfactants except Triton X 100 and cetyltrimethylammonium bromide have no or very little inhibitory effects on enzyme activity. The enzyme was found to be stable in presence of oxidizing agents and protease enzyme. The maximum lipase production was achieved at 30–33 °C, pH 8.0 on 24 h of fermentation using 50 ml medium in a 250-ml Erlenmeyer flask. The superior carbon and nitrogen sources for lipase production were starch (2%) and ammonium sulfate (nitrogen level 21.2 mg/100 ml), peptone (nitrogen level 297 mg/100 ml), and urea (nitrogen level 46.62 mg/100 ml) in combination, respectively. The maximum enzyme activity obtained was 33 ± 0.567 IU/ml.