Effect of some chemical modifiers on the glass/crystal transformation in binary Se<Subscript>90</Subscript>In<Subscript>10</Subscript> alloy

This work reports the effect of Ge, Sb, Sn additives on the thermally activated glass to crystal phase transition in binary Se₉₀In₁₀ alloy. Differential scanning calorimetry (DSC) technique is used for this purpose. Different kinetic parameters of glass/crystal transformation have been calculated. The results are explained using the chemical bond approach for the covalent network of such glasses.     

Deposition conditions,composition, and structure of chemically deposited In<Subscript>2</Subscript>Se<Subscript>3</Subscript> films

In₂Se₃ films up to 300 nm thick have been obtained for the first time by hydrochemical deposition on glass, glass ceramic, and molybdenum substrates in the In(NO₃)₃–C₄O₆H₆–CSeN₂H₄ system with the use of selenourea as a chalcogenizing agent. The phase and element composition and morphological features of layers obtained at 353 and 363 K have been studied by X-ray photoelectron spectroscopy, energy-dispersive electron probe X-ray microanalysis, and scanning electron microscopy. The optical band gap width has been determined.     

Character of interaction and glass formation in the TlAs<Subscript>2</Subscript>Se<Subscript>4</Subscript>-Tl<Subscript>3</Subscript>As<Subscript>2</Subscript>S<Subscript>3</Subscript>Se<Subscript>3</Subscript> system

The TlAs₂Se₄-Tl₃As₂S₃Se₃ system was investigated by physicochemical methods (DTA, X-ray powder diffraction, microstructural analysis), and its phase diagram was constructed. The TlAs₂Se₄-Tl₃As₂S₃Se₃ join is a quasi-binary internal section of the As-Tl-S-Se quaternary system. The solubility range of TlAs₂Se₄-based solid solutions is extended to 7 mol %, and the region of Tl₃As₂S₃Se₃-based solid solutions is extended to 15 mol %.     

Crystallization process analysis for Se<Subscript>0.95</Subscript>In<Subscript>0.05</Subscript> and Se<Subscript>0.90</Subscript>In<Subscript>0.10</Subscript> chalcogenide glasses using the contemporary isoconversional models

Carrying out crystallization studies for both Se_0.95In_0.05 and Se_0.90In_0.10 chalcogenide glasses under non-isothermal conditions at different heating rates, it was realized that a rate controlling process occurs where random nucleation of one- to two-dimensional growth is accompanied with the introduction of up to 10 at% In into glassy Se matrix. The crystallization kinetics together with its dimensionality has been studied using the four currently used isoconversional models (Kissinger–Akahira–Sunose, Ozawa–Flynn–Wall, Tang, and Starink). The activation energy of crystallization (E _c) has been determined using these indicated four models where a satisfactory concurrence is achieved. The value of E _c shows a decrease while increasing both the In-content as well as the extent of crystallization.     

Phase equilibria in the PbSe-Bi<Subscript>2</Subscript>Se<Subscript>3</Subscript>-Se system and thermodynamic properties of intermediate phases

The Pb-Bi-Se system in the PbSe-Bi₂Se₃-Se-Se composition region was studied by measurement of concentration circuits of the type (−) PbSe(solid) liquid electrolyte, Pb²⁺(Pb-Bi-Se)(solid) (+) in the temperature range 300–430 K and by X-ray powder diffraction. A solid-phase equilibrium diagram was constructed, and the formation was confirmed for the ternary compounds Pb₅Bi₆Se₁₄, Pb₅Bi₁₂Se₂₃, and Pb₅Bi₁₈Se₃₂, which belong to the homologous series [(PbSe)₅] _m · [(Bi₂Se₃)₃] _n . From the emf versus temperature equations, the partial thermodynamic functions [`(DG)]\overline {\Delta G}, [`(DH)]\overline {\Delta H}, [`(DS)]\overline {\Delta S} of PbSe in alloys were calculated. Based on the solid-phase equilibrium diagram from these partial molar quantities using the corresponding data for PbSe and Bi₂Se₃, the standard thermodynamic functions of formation and standard entropies of the above ternary compounds were calculated.     

Interatomic interactions and electronic structure of NbSe<Subscript>2</Subscript> and Nb<Subscript>1.25</Subscript>Se<Subscript>2</Subscript> nanotubes

Atomic models of achiral NbSe₂ nanotubes are suggested. Band structure calculations have been performed to investigate the electronic structure and determine the parameters of interatomic interactions. The distribution of the density of states and pair bond occupancies of NbSe₂ nanotubes are analyzed in relation to the type of the atomic configuration and the tube diameter; the results are compared with the band structure of the 2H-NbSe₂ crystal. Calculations have been carried out on hypothetical superstoichiometric nanotubes with a formal composition Nb_1.25Se₂ as possible quasi-one-dimensional nanoforms of autointercalated niobium diselenide.Original Russian Text Copyright © 2004 by A. N. Enyashin, V. V. Ivanovskaya, I. R. Shein, Yu. N. Makurin, N. I. Medvedeva, A. A. Sofronov, and A. L. IvanovskiiTranslated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 4, pp. 579–588, July–August, 2004.This revised version was published online in April 2005 with a corrected cover date.     

Glass transition and crystallization study of chalcogenide Se<Subscript>70</Subscript>Te<Subscript>15</Subscript>In<Subscript>15</Subscript> glass

Differential scanning calorimetry data at different heating rates (5, 10, 15 and 20 °C min⁻¹) of Se₇₀Te₁₅In₁₅ chalcogenide glass is reported and discussed. The crystallization mechanism is explained in terms of recent analyses developed for use under non-isothermal conditions. The value of Avrami exponent (n) indicates that the glassy Se₇₀Te₁₅In₁₅ alloy has three-dimensional growth. The average values of the activation energy for glass transition, E _g, and crystallization process, E _c, are (154.16 ± 4.1) kJ mol⁻¹ and (98.81 ± 18.1) kJ mol⁻¹, respectively. The ease of glass formation has also been studied. The reduced glass transition temperature (T _rg), Hruby’ parameter (K _gl) and fragility index (F _i) indicate that the prepared glass is obtained from a strong glass forming liquid.     

Effect of Bi incorporation on the glass transition kinetics of Se<Subscript>85</Subscript>Te<Subscript>15</Subscript> glassy alloy

Bulk samples of Se_85-xTe₁₅Bi_x glassy alloys are obtained by melt quenching technique. Differential scanning calorimetry has been applied to determine the thermal properties of Se-rich Se_85-xTe₁₅Bix glassy alloys at different heating rates. The glass transition temperature (T _g) is found to shift to a higher temperature with increasing heating rate and with Bi addition. Activation energy and fragility of the system is also calculated. Specific heat is evaluated and a jump in heat capacity is observed at T _g. Theoretical parameters viz; density, molar volume, number of atoms per unit volume, lone pair electrons and cohesive energy of the system are also reported.     

Novel Electroless Deposition of Cu<Subscript>3</Subscript>Se<Subscript>2</Subscript> Film on Silicon Substrate by a Simple Galvanic Displacement Process

A novel electroless deposition method for depositing highly uniform adhesive thin films of copper selenide (Cu₃Se₂) on silicon substrates from aqueous solutions is described. The deposition is carried out by two coupled galvanic reactions in a single deposition bath containing copper cations, hydrogen fluoride, and selenous acid: the galvanic deposition of copper on silicon and the subsequent galvanic reaction between the deposited copper with selenous acid in the deposition bath. The powder X-ray diffraction and scanning electron microscopy are used to characterize and examine the deposited films.     

Phase formation in mixed TiO<Subscript>2</Subscript>-ZrO<Subscript>2</Subscript> oxides prepared by sol-gel method

Pure titania, zirconia, and mixed oxides (3–37 mol.% of ZrO₂) are prepared using the sol-gel method and calcined at different temperatures. The calcined samples are characterized by Raman spectroscopy, X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy, and nitrogen adsorption porosimetry. Measurements reveal a thermal stability of the titania anatase phase that slightly increases in the presence of 3–13 mol.% of zirconia. Practically, the titania anatase-rutile phase transformation is hindered during the temperature increase above 700°C. The mixed oxide with 37 mol.% of ZrO₂ treated at 550°C shows a new single amorphous phase with a surface area of the nanoparticles double with respect to the other crystalline samples and the formed srilankite structure (at 700°C). The anatase phase is not observed in the sample containing 37 mol.% of ZrO₂. The treatment at 700°C causes the formation of the srilankite (Ti_0.63Zr_0.37O_x) phase.     

The Role of Y<Subscript>2</Subscript>O<Subscript>3</Subscript> and MgO Additives on the Photoluminescence Properties of Si<Subscript>3</Subscript>N<Subscript>4</Subscript> Nanoparticles

The current research addressed synthesizing and studying photoluminescence studies of β-Si₃N₄ nanoparticles. The effect of MgO and Y₂O₃ as the typical additives on photoluminescence behaviour was evaluated. The β-Si₃N₄ with MgO and Y₂O₃ additive specimens were fabricated by a solid state technique (ball-milled method). The as-prepared products were characterized by X-ray diffraction technique, transmission electron microscopy, field emission scanning electron microscopy, energy dispersive X-ray spectroscopy and Raman analysis. The results showed that after ball-milled process, hexagonal β-Si₃N₄ with MgO or Y₂O₃ as the additives with the size distribution of 45–50 nm was obtained. The optical properties of the as-synthesized product were also investigated by photoluminescence and diffuse reflection spectroscopy. The obtained results confirmed that employing MgO as an additive, in comparison to the Y₂O₃, could enhance emission properties in the synthesized silicon nitride nanoparticles. The obtained results also showed that MgO–Si₃N₄ pair acted as FRET system to enhance the emission intensity of β-Si₃N₄ nanoparticles.     

Some properties of rhodium thioselenochloride RhCl<Subscript>4</Subscript>Se<Subscript>6</Subscript>S<Subscript>9</Subscript> and its thermal conversion products

The structure of rhodium thioselenochloride RhCl₄Se₆S₉ and the products of its thermal decomposition are studied by X-ray photoelectron and IR spectroscopies, X-ray powder diffraction, thermal, and elemental analyses. The thermal decomposition of RhCl₄Se₆S₉ was found to occur with a loss of weakly bonded chloro-, sulfur-, and selenium-containing fragments (at 100°C); at the higher temperatures, chlorine is lost and rhodium thioselenides are obtained (Rh₄Se₄S₅ at 490°C and Rh₄Se₃S₅ at 665°C). These changes are attended by the formation of the cluster nucleus [Rh₄(µ_3-Se)₃(µ₃-S)].Translated from Koordinatsionnaya Khimiya, Vol. 30, No. 12, 2004, pp. 910–914.Original Russian Text Copyright © 2004 by Pekhno, Stepanenko, Volkov, Fokina, Korduban.     

Crystal structure of Tl<Subscript>5</Subscript>{[Nb<Subscript>2</Subscript>S<Subscript>4</Subscript>Br<Subscript>8</Subscript>]Br}

By the high-temperature reaction of Nb₂S₄Br₄ and TlBr a thallium salt of the anionic cluster complex [Nb₂S₄Br₈]^4? is obtained. Its crystal structure is determined by X-ray structural analysis. The complex is also characterized by Raman spectroscopy and electrospray-mass-spectrometry.     

Synthesis,crystal structure,and biological properties of the complex [Co(DmgH)<Subscript>2</Subscript>(Seu)<Subscript>1.4</Subscript>(Se-Seu)<Subscript>0.5</Subscript>(Se<Subscript>2</Subscript>)<Subscript>0.1</Subscript>][BF<Subscript>4</Subscript>]

A new Co(III) dioxime complex with selenocarbamide was obtained by the reaction of Co(BF₄)₂ ? 6H₂O, DmgH₂, and Seu (DmgH2 = dimethylglyoxime, Seu = selenocarbamide). According to X-ray diffraction (CIF file CCDC no. 1485732), the product was an ionic coordination compound with unusual composition, [Co(DmgH)₂(Seu)_1.4(Se-Seu)_0.5(Se₂)_0.1][BF₄] (I). Apart from two monodeprotonated DmgH￣ molecules, the central atom coordinates neutral Seu, Se-Seu, and Se₂ molecules. Thus, the crystal contains the complex cations [Co(DmgH)₂(Seu)₂]⁺, [Co(DmgH)₂(Seu)(Se-Seu)]⁺, and [Co(DmgH)₂(Seu)(Se₂)]⁺. Each [BF₄]￣ anion is linked to the cations not only by electrostatic forces but also by intermolecular N–H···F hydrogen bonds (H-bonds). The complex cations are combined by intermolecular N–H···O H-bonds. The new coordination compound was found to possess biological activity. Treatment of the garlic (Allium sativum L.) foliage with an aqueous solution of I optimizes the content of selenium in the leaves and cloves and enhances the growth and plant productivity. The organs of treated plants are characterized by enhanced antioxidant protection owing to increasing activity of antioxidant enzymes and contents of proline and assimilation pigments, and decreasing lipid peroxidation.     

Thermodynamic study of the Ag-As-Se and Ag-S-I systems using the EMF method with a solid Ag<Subscript>4</Subscript>RbI<Subscript>5</Subscript> electrolyte

The EMF method with a solid Ag₄RbI₅ superionic conductor was used to study the Ag-As-Se and Ag-S-I systems in the composition ranges of Ag₂Se-As₂Se₃-Se and Ag₂S-AgI-S, accordingly. Their solid-phase equilibrium diagrams are constructed or specified. The existence of ternary AgAs₃Se₅, AgAsSe₂, Ag₃AsSe₃, Ag₇AsSe₆, Ag₃SI compounds is confirmed. The standard partial and integral thermodynamic formation functions and also standard entropies were calculated for these compounds for the first time.     

Sb<Subscript>2</Subscript>S<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> nanocomposite layers synthesized using the layer-by-layer technique

Possibility of layer-by-layer synthesis by colloidal layering of Sb₂S₃-SiO₂ nanocomposite layers from colloid solutions of {[H _x Sb₂S₅] ^m ?}mNa⁺ and SiO₂ was studied. The composition of the layers synthesized was examined by Raman spectroscopy, transmission spectroscopy in the UV and visible spectral ranges, energy-dispersion micro analysis, and scanning electron microscopy.     

Synthesis of MgFe<Subscript>1.6</Subscript>Ga<Subscript>0.4</Subscript>O<Subscript>4</Subscript> by Gel Combustion Using Glycine and Hexamethylenetetramine

A powderlike material of composition MgFe_1.6Ga_0.4O₄ was synthesized by gel combustion using a glycine–hexamethylenetetramine mixture. The gel produced by the synthesis was studied by thermal analysis (TGA/DSC) and IR spectroscopy. This mixture was shown to be efficient for obtaining homogeneous nanosized MgFe_1.6Ga_0.4O₄. The morphology of the powders was characterized by scanning electron microscopy and X-ray powder diffraction analysis.     

Comparative analysis of calorimetric studies in Se<Subscript>90</Subscript>M<Subscript>10</Subscript> (<Emphasis Type="Italic">M</Emphasis>=In,Te, Sb) chalcogenide glasses

Calorimetric measurements have been performed in glassy Se₉₀M₁₀ (M=In, Te, Sb) alloys to study the effect of In, Te and Sb additives on the kinetics of glass transition and crystallization in glassy Se₉₀M₁₀ system. Kinetic parameters of glass transition and crystallization such as the activation energy of glass transition (E _g), the activation energy of crystallization (M _c), the order parameter (n), the rate constant (K), etc. have been determined using different non-isothermal methods. The composition dependence of the activation energies of glass transition and crystallization processes is also discussed.     

Synthesis of Mg(Fe<Subscript>0.8</Subscript>Ga<Subscript>0.2</Subscript>)<Subscript>2</Subscript>O<Subscript>4</Subscript> by Gel Combustion Using Glycine and Starch

A powdery material Mg(Fe_0.8Ga_0.2)₂O₄ has been prepared by combusting a gel containing magnesium(II), iron(III), and gallium(III) nitrates and a glycine–starch mixture. The gel produced during the synthesis has been studied by thermal analysis (TGA/DSC) and IR spectroscopy. This mixture has been shown to be efficient to produce a homogeneous nanosized powderlike material Mg(Fe_0.8Ga_0.2)₂O₄. The morphology and properties of ceramic samples are characterized by scanning electron microscopy, X-ray powder diffraction, neutron diffraction, and vibrational magnetometry.     

Organic-inorganic hybrid perovskite (C<Subscript>6</Subscript>H<Subscript>5</Subscript>(CH<Subscript>2</Subscript>)<Subscript>2</Subscript>NH<Subscript>3</Subscript>)<Subscript>2</Subscript>CdCl<Subscript>4</Subscript>: Synthesis,structural and thermal properties

The present research work reports the study on crystal structure, vibrational spectroscopy and thermal analysis of organic-inorganic hybrid compound (C₆H₅(CH₂)₂NH₃)₂CdCl₄. Single crystals of bis(phenethylammonium)tetrachlorocadmate (C₆H₅(CH₂)₂NH₃)₂CdCl₄ (PEA–Cd) were obtained by diffusion at room temperature. This compound crystallizes in the orthorhombic space group C2cb with unit cell parameters a = 7.4444(2) Å, b = 38.8965(3) Å, c = 7.3737(2) Å and Z = 4. Single crystal structure has been solved and refined to R = 0.036 and wR = 0.092. The structure consists of an extended [CdCl₄]^2– network and two [C₆H₅(CH₂)₂NH₃]⁺ cations to form a two-dimensional perovskite system. The infrared (IR) spectrum of the title compound was recorded at room temperature. Differential scanning calorimetry (DSC) was used to investigate the phase transition; this compound exhibits a reversible single solid-solid phase transition.