Biosynthesis and Characterization of Poly (3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-3-hydroxyvalerate-<Emphasis Type="Italic">co</Emphasis>-4-hydroxybutyrate) Terpolymer with Various Monomer Compositions by <Emphasis Type="Italic">Cupriavidus</Emphasis> sp. USMAA2-4

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-4-hydroxybutyrate) [P(3HB-co-3HV-co-4HB)] terpolymer was produced using Cupriavidus sp. USMAA2-4 via one-step cultivation process through combination of various carbon sources such as 1,4-butanediol or γ-butyrolactone with either 1-pentanol, valeric acid, or 1-propanol. Oleic acid was added to increase the biomass production. The composition of 3HV and 4HB monomers were greatly affected by the concentration of 1,4-butanediol and 1-pentanol. Terpolymers with 3HV and 4HB molar fractions ranging from 2 to 41 mol.% and 5 to 31 mol.%, respectively, were produced by varying the concentration of carbon precursors. The thermal and mechanical properties of the terpolymers containing different proportions of the constituent monomers were characterized using gel permeation chromatography (GPC), DSC, and tensile machine. GPC analysis showed that the molecular weights (M _w) of the terpolymer produced were within the range of 346 to 1,710 kDa. The monomer compositions of 3HV and 4HB were also found to have great influences on the thermal and mechanical properties of the terpolymer P(3HB-co-3HV-co-4HB) produced.     

Multiple endothermic peaks resulted from different crystal structures in an isomorphous copolymer poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-3-hydroxyvalerate)

The multiple endothermic peaks of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P(HB-co-HV)) in differential scanning calorimetry (DSC) results, as one representative phenomenon of polymer with unique cocrystallization behavior, were generally considered as the results of melting/recrystallization. In this study, wide angle X-ray diffraction (WAXD) and small angle X-ray scattering (SAXS) experiments were conducted to analyze the phenomena of multiple endothermic peaks in DSC results. The results of these analyses indicated that the multiple endotherms were mainly caused by different lamellae structures. For P(HB-co-HV) with lower HV content, it was comprised of two structures of HV total exclusion and HV partial inclusion in the crystal lamellae. For P(HB-co-HV) with higher HV content, it was also comprised of two structures of HV total inclusion and HV partial inclusion in the crystal lamellae. However, only structure with HV partial inclusion in the crystal lamellae remained existing after first melting peak for all samples.     

Novel terpolymers of poly(<Emphasis Type="Italic">p</Emphasis>-dioxanone-<Emphasis Type="Italic">co</Emphasis>-trimethylene carbonate-<Emphasis Type="Italic">co</Emphasis>-L-phenylalanine): Synthesis,characterization, thermal properties and copolymerization mechanism

In order to exploit the biological functions of materials, a series of new random terpolymers were synthesized by the ring-opening polymerization of p-dioxanone, trimethylene carbonate, and L-phenylalanine N-carboxyanhydride (L-Phe- NCA) in the presence of stannous octoate. The terpolymers were characterized by ¹H-NMR, ¹³C-NMR, FTIR, and gel permeation chromatography. The effects of the reactant ratio, catalyst dosage, reaction temperature and time on the copolymerization were investigated, and were found to regulate the composition of the terpolymer. Increases in the reaction temperature, polymerization time, L-Phe-NCA monomer amount, and catalyst content generated a product with a slightly decreased molecular weight. The crystallinity of the terpolymer was investigated by differential scanning calorimetry and polarized optical microscopy. A reasonable mechanism for the polymerization was proposed based on the obtained results.     

Synthesis and properties of organic-inorganic hybrid P(NIPAM-<Emphasis Type="Italic">co</Emphasis>-AM-<Emphasis Type="Italic">co</Emphasis>-TMSPMA) microgels

Utilizing the hydrolysis and condensation of the methoxysilyl moieties, organic-inorganic hybrid poly(N-isopropylacrylamide-co-acrylamide-co-3-(trimethoxysilyl)propylmethacrylate) P(NIPAM-co-AM-co-TMSPMA) microgels were prepared via two different methods. The first method was that the microgels were post-fabricated from the crosslinkable linear P(NIPAM-co-AM-co-TMSPMA) terpolymer aqueous solutions above the lower critical solution temperature (LCST) of the terpolymer. For the second method, the microgels were directly synthesized by conventional surfactant free emulsion copolymerization of NIPAM, AM, and TMSPMA. The hydrodynamic diameter and stability of the resultant P(NIPAM-co-AM-co-TMSPMA) microgels strongly depend on the pH and temperature of the microgel aqueous solution. The hydrodynamic diameters of the microgels decreased with increasing the measuring temperature. The phase transition temperature of the microgels was found to be around 34°C, which was independent of the initial terpolymer concentration and shifted to lower temperature with increasing the preparation temperature. Increasing the initial amount of AM will enhance the instability of the microgels at high pH values. Moreover, the P(NIPAM-co-AM-co-TMSPMA) microgels obtained from the linear terpolymer had more homogeneous microstructures as compared with the corresponding NIPAM/AM/TMSPMA microgels prepared by one step emulsion copolymerization as revealed by light scattering measurements.     

Synthesis of (<Emphasis Type="Italic">E</Emphasis>)-<Emphasis Type="Italic">N</Emphasis>-(3-alkoxy-4-acyloxyphenylmethylene)-<Emphasis Type="Italic">N</Emphasis>-(<Emphasis Type="Italic">e</Emphasis>-cyclohexyl)amines

Previously unknown E isomers of azomethines (Schiff bases) were synthesized from vanillal and vanillin esters by their reaction with cyclohexylamine.     

Preparation,characterization and morphological study of poly(<Emphasis Type="Italic">m</Emphasis>-toluidine-<Emphasis Type="Italic">co</Emphasis>-<Emphasis Type="Italic">m</Emphasis>-aminoacetophenone) conductive copolymer

A new series of copolymers of poly(m-toluidine-co-m-aminoacetophenone) were synthesized by the chemical oxidative method in acid medium. The copolymers were characterized by UV–Vis and FTIR spectroscopy. X-ray diffraction analysis revealed the partial crystalline nature of copolymer. The morphological study by SEM analysis indicated that the surface of the copolymer had the granular structure of agglomerated morphology with average particle size of 200 nm. The conductivity of the copolymers ranged from 2 × 10^–4 to 3.3 × 10^–8 S/cm and the conductivity decreased with the increase of comonomer concentration. The resultant copolymers showed an enhanced solubility and an improved processability when compared with pure polyaniline.     

The Crystallization,Melting Behaviors and Thermal Stability of Cross-linked Poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-3-hydroxyvalerate) by Octavinyloctasilasesquioxane

A series of cross-linked poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/octavinyloctasilasesquioxane (PHBV/OVS) composites were obtained by a simple melt reactive processing technique. Dicumyl peroxide (DCP) and OVS were employed as a free radical initiator and a cross-linking agent, respectively. The chemical structure of these produced composites were identified by ¹H/¹³C/²⁹Si-nuclear magnetic resonance spectroscopy (¹H/¹³C/²⁹Si-NMR) and Fourier transform infrared spectroscopy (FTIR). The melting behavior, non-isothermal crystallization, spherulite morphology and thermal stability property of PHBV/OVS composites were also investigated. The nucleation behaviors and crystallization rate of PHBV/OVS were significantly enhanced with the formation of cross-linked networks with different side-chains and cross-linking points. The red shift of crystalline peak temperature with addition of a small amount of OVS content evidenced the higher crystalline ability compared with the neat PHBV. However there was a threshold content, beyond which the crystallization rate weakened again. Additionally, the cross-linked structure of PHBV/OVS composites could be adjusted by changing the amount of OVS.     

The influence of the synthesis pressure on the chromatographic properties of poly(divinylbenzene-<Emphasis Type="Italic">co</Emphasis>-ethylvinylbenzene-<Emphasis Type="Italic">co</Emphasis>-2-hydroxyethyl methacrylate) monolithic columns

Monolithic columns based on copolymer of divinylbenzene (DVB), ethylvinylbenzene (EVB), and 2-hydroxyethyl methacrylate (HEMA) were prepared and applied to the separation of low-molecular-weight aromatic compounds. The monoliths were synthesized via thermally initiated free-radical polymerization in confines of stainless steel tubes with dimensions of 100 × 4.3 mm. In order to compensate for the polymer shrinkage during the synthesis and prevent the monolith from detachment from the column wall, the polymerization was conducted under nitrogen pressure. The excess pressure was varied from 0 bar to 9 bar. The synthesis under pressure was shown to improve the peak shapes and column efficiency in comparison with the synthesis in the closed tube. The optimum pressure for poly(DVB-co-EVB-co-HEMA) monoliths was found to be 3 bar. The efficiency of the column obtained at 3 bar is 13 500 TP/m for propylbenzene (k′ = 6) and 38 300 TP/m for uracil (k′ = 0).     

Mixtures poly((<Emphasis Type="Italic">R</Emphasis>)-3-hydroxybutyrate) and poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactic acid) subjected to DSC

Blends of bacterial poly((R)-3-hydroxybutyrate) (PHB) and poly(l-lactic acid) (PLLA) synthesized by polycondensation of l-lactic acid or by ring-opening polymerization of l-lactide were studied. Miscibility was investigated through both conventional differential scanning calorimetry (DSC) and temperature-modulated DSC (TMDSC). PHB and low-molar mass PLLA were miscible in a whole concentration range, and a single glass transition temperature was observed. On the other hand, PHB/high-molar mass PLLA mixtures phase separate, giving rise to two glass transition temperatures corresponding to PHB and PLLA. A treatment of blends at 190 °C leads to formation of block/multiblock/random copolymers, and blends become miscible.     

Solvent dependent swelling behaviour of poly(<Emphasis Type="Italic">N</Emphasis>-vinylcaprolactam) and poly(<Emphasis Type="Italic">N</Emphasis>-vinylcaprolactam-<Emphasis Type="Italic">co</Emphasis>-itaconic acid) gels and determination of solubility parameters

Swelling behaviour of poly(N-vinylcaprolactam) (PVC) and poly(N-vinylcaprolactam-co-itaconic acid) (P(VC-co-IA)) gels was investigated in different solvents (water, ethanol, methanol, isopropyl alcohol (IPA), chloroform, toluene, acetone) and in binary solvent mixtures (ethanol/chloroform, ethanol/methanol, IPA/chloroform, ethanol/water, IPA/water). Gels were synthesised in ethanol by the free radical cross-linking polymerisation method at 60°C for 24 h in the presence of azo-bis(isobutyronitrile) and allyl methacrylate as the initiator and cross-linker, respectively. And also, ethanol/distilled water mixture (?_r = 4:1) was used as the synthesis medium to determine its effect on the swelling of gels. It was found that the presence of water in the synthesis medium significantly affected the equilibrium swelling value (ESV) and the swelling tendency of gels both in solvents and in solvent mixtures. All gels synthesised in ethanol showed the highest swelling in chloroform. The gels synthesised in the ethanol/water mixture displayed different swelling behaviour. In this case, while chloroform was still valid for maximum swelling of PVC, P(VC-co-IA) had the highest swelling in methanol. Solubility parameters of gels were predicted by the van Krevelen-Hoftyzer (VKH) and Hoy methods (group contribution methods) and theoretical calculations verified the experimental swelling order.     

Molecular orientation and optical anisotropy in drawn films of cellulose diacetate-<Emphasis Type="Italic">graft</Emphasis>-PLLA: comparative investigation with poly(vinyl acetate-<Emphasis Type="Italic">co</Emphasis>-vinyl alcohol)-<Emphasis Type="Italic">graft</Emphasis>-PLLA

Cellulose diacetate-graft-poly(L-lactide) (CDA-g-PLLA) and poly(vinyl acetate-co-vinyl alcohol)-graft-PLLA (P(VAc-co-VOH)-g-PLLA) were synthesized over a range of compositions, by ring-opening copolymerization of L-lactide at the original hydroxyl positions of the respective trunk polymers, CDA (acetyl DS = 2.15) and P(VAc-co-VOH)-g-PLLA (VAc = 64.2 mol%). All the products of both graft copolymer series were non-crystallizable and their solution-cast films showed no domain segregation of the two components that constituted the trunk and side-chains. A comparative study on the molecular orientation and optical anisotropy induced by uniaxial stretching of film samples was undertaken for the two copolymer series with various side-chain lengths. Overall behaviour of the orientation was estimated from the statistical second (<cos² ω>) and fourth (<cos⁴ ω>) moments obtained by a fluorescence polarization method using a rod-like probe of ~2.5 nm. Upon stretching, any film of both series imparted a positive orientation function, i.e., f = (3 <cos² ω> − 1)/2 > 0, which increased with the extent of deformation. The degree of molecular orientation was higher in the CDA-graft series with a semi-rigid trunk, and, in both series, it declined monotonically with increasing content of the PLLA side-chain. With regard to the optical anisotropy, CDA-g-PLLA films always exhibited a positive birefringence (Δn > 0) upon stretching, while drawn films of P(VAc-co-VOH)-g-PLLA displayed a negative one. This contrast in polarity reflects a difference in the intrinsic birefringence between the two trunk polymers. Of interest was the finding of a discontinuous change in Δn value with copolymer composition (PLLA content) for the respective graft series, when compared at a given stage of elongation of the films. Discussion took into consideration the locally different orientation manners of the attached PLLA chain segments.     

Synthesis of chiral glycolurils from (<Emphasis Type="Italic">S</Emphasis>)-(+)- and (<Emphasis Type="Italic">R</Emphasis>)-(-)-1-<Emphasis Type="Italic">sec</Emphasis>-butyl-3-methylurea

Chiral dialkyl- and tetraalkylglycolurils have been obtained using chiral (S)-(+)- and (R)-(-)-1-sec-butyl-3-methylurea as starting materials. The diastereomer (S)-(+)-2,6-di-sec-butyl-4,8-dimethyl-2,4,6,8-tetraazabicyclo[3.3.0]-octane-3,7-dione was separated into stereoisomers, for the higher melting of which the absolute configuration was determined as (S,S,S,S) by X-ray structural analysis.     

Syntheses of (<Emphasis Type="Italic">E</Emphasis>)- and (<Emphasis Type="Italic">Z</Emphasis>)-3-styrylchromones

Several (E)- and (Z)-3-styrylchromones were prepared by two different methodologies, the Wittig reaction of chromone-3-carboxaldehyde with benzylic ylides and the Knoevenagel condensation of chromone-3-carboxaldehyde with phenylacetic acids in the presence of potassium tert-butoxide under microwave irradiation. The Knoevenagel reaction followed by a decarboxylation offered an efficient and diastereoselective method for preparing (E)-3-styrylchromones in a shorter reaction time. It was also demonstrated that phenylacetic acid can also be substituted with success by phenylmalonic acid. The stereochemistry of all products was assigned by NMR experiments. Correspondence: Artur M. S. Silva, Chemistry Department, University of Aveiro, 3810-193 Aveiro, Portugal.     

Preparation and polymerization mechanism of dihydroxy-capped PCL,poly(CL-<Emphasis Type="Italic">b</Emphasis>-PEG-<Emphasis Type="Italic">b</Emphasis>-CL) and poly(DTC-<Emphasis Type="Italic">b</Emphasis>-CL-<Emphasis Type="Italic">b</Emphasis>-DTC)

The ring opening polymerization of ε-caprolactone (CL) was initiated by glycol and yttrium tri(2,6-di-tert-butyl-4-methylphenolate)s (Y(OAr)₃), preparing dihydroxy-capped poly (ε-caprolactone) (PCL) with controllable molecular weight. ¹H NMR and SEC analyses indicate that two kinds of active species and corresponding PCL with different structures exist in the system. Increasing the ratio of glycol to Y(OAr)₃ benefits the formation of monofunctional active species. However, poly(ethylene glycol) (PEG)/Y(OAr)₃ system only contains sole bifunctional active species to synthesize copolymer of CL with PEG (poly(CL-b-PEG-b-CL)). Dihydroxycapped PCL as macroinitiator can further initiate the polymerization of 2,2-dimethyltrimethylene carbonate (DTC). Thus, triblock copolymer of CL with DTC (poly(DTC-b-CL-b-DTC)) has been prepared.     

Electrosynthesis of poly(<Emphasis Type="Italic">p</Emphasis>-phenylene) and poly(<Emphasis Type="Italic">p</Emphasis>-phenylene/pyrrole) films under controlled humidity

Poly(p-phenylene/pyrrole) (PPP-PPY) films were electrochemically synthesised on transparent indium-tin-oxide-covered glass (ITO) electrodes. The presence of two monomers, p-phenylene and pyrrole, in the polymerisation medium facilitated the synthesis process, yielding electroactive, uniform and stable films. In order to obtain materials with improved quality, PPP, PPY and PPP-PPY films were prepared in a mild, dry atmosphere. The morphological, electrochemical and optical properties were compared for different films obtained by varying the number of cycles with and without controlling humidity.     

Conformations and properties of <Emphasis Type="Italic">O</Emphasis>-Alkyl-<Emphasis Type="Italic">S</Emphasis>-(2-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dialkylamino)-ethylmethylthiophosphonates

Conformers of the biologically active compounds CH₃P(O)(OR)(SCH₂CH₂NR ₂ ^′ ), where (I) R = i-C₄H₉, R′ = C₂H₅ and (II) R = C₂H₅, R′ = i-C₃H₇, are calculated within the AM1 level of theory. The elongated and twisted forms with maximum and minimum distances between a nitrogen atom and those of a phosphorus tetrahedron, respectively, and bearing a syn and anti oriented alkoxy group relative to a phosphoryl oxygen, are studied. It is found that the differences between the energy, electronic, and geometric parameters of these forms are apparent in differences between their properties, e.g., the ability to participate in complexation and protonation, reactions that to some extent simulate the interaction between a substance and a biological object.     

Thermal analysis characterization of PAAm-<Emphasis Type="Italic">co</Emphasis>-MC hydrogels

This paper reports the thermal characterization of polyacrylamide-co-methylcellulose hydrogels and the constituent monomers (acrylamide and methylcellulose). Polymeric materials can be used to produce hydrogels, which can be natural, synthetic, or a mixture. The hydrogels described here were obtained by free radical polymerization, in the presence of N,N′-methylene-bis-acrylamide as a cross-linker agent. Four acrylamide concentrations were used for the synthesis of hydrogels: 3.6, 7.2, 14.7, and 21.7% (w/v). The materials so obtained were analyzed by TG, DTG, DSC, and FT-IR. The TG curves of acrylamide and methylcellulose showed three mass loss events. In DSC curves, the acrylamide exhibited one melting peak at 84.5 °C, and methylcellulose indicated one exothermic event. Nevertheless, acrylamide was considered more stable than methylcellulose. The TG curves of the hydrogels exhibited three mass loss events, and on the DSC curves, three endothermic events were observed. It was verified that the different acrylamide proportions influenced the thermic behavior of hydrogels, and that the authors considered the 7.2% hydrogel a promising drug carrier system. The absorption bands were well defined, confirming the presence of the functional groups in the samples.     

Synthesis of <Emphasis Type="Italic">N</Emphasis>-(2-aminoethyl)- and <Emphasis Type="Italic">N</Emphasis>-(3-aminopropyl)cytisine

2-(N-cytisinyl)acetamide or 3-(N-cytisinyl)propanamide were prepared by treatment of the methyl esters of N-cytisinylacetic or 3-(N-cytisinyl)propanoic acids with aqueous NH₄OH. N-(2-Aminoethyl)-or N-(3-aminopropyl)cytisine was synthesized by reduction of the amide with (i-Bu)₂AlH.     

Synthesis of (2<Emphasis Type="Italic">S</Emphasis>,3<Emphasis Type="Italic">S</Emphasis>,4<Emphasis Type="Italic">S</Emphasis>)-2,3-<Emphasis Type="Italic">O</Emphasis>-isopropylidene-4-(methoxycarbonylmethyl)cyclopentan-1-one

(2S,3S,4S)-2,3-O-Isopropylidene-4-(methoxycarbonylmethyl)cyclopentan-1-one was synthesized starting from D-ribose through methyl (Z)-3-(5-acetyl-2,2-acetoxyacetyl-2,2-dimethyl-1,3-dioxolan-4-yl)prop-2-enoate which was subjected to cyclization in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene, followed by decarboxylation.