Field-induced self-assembly: does size matter?

ABSTRACT

Simulated external electric fields are applied to polarisable species containing either a monodisperse of bidisperse distribution of polarisabilities. The magnitude of the external field and the polarisabilities are systematically varied. The application of an external field (of sufficient magnitude) is found to induce chain formation (as expected). The monodisperse systems are found to ‘self-assemble’ with larger induced dipole moments effectively clustering in chains as a result of significant dipole-induced dipole effects. The distribution of the chain lengths is characterised as a function of the applied field and the atom polarisability. For the bidisperse systems, the external field induces chain formation and a partial segregation, in which the more polarisable species preferentially form chains. The chain lengths are again determined as a function of field strength and the atom polarisabilities. Scaling behaviour is analysed.     

Alloy formation of supported gold nanoparticles at their transition from clusters to solids: does size matter?

Gold nanoclusters of a size approaching the molecular limit (<3 nm) were prepared on Si substrates in order to study alloy formation on the nanometer scale. For this purpose, indium atoms are deposited on top of the gold particles at room temperature and the formation of AuIn(2) is studied by x-ray photoelectron spectroscopy in situ. It is observed that the alloy formation takes place independent of whether the particles electronically are in an insulating molecular or in a metallic state. Most important, however, closed packed full-shell clusters containing 55 Au atoms are found to exhibit an outstanding stability against alloying despite a large negative heat of formation of the bulk Au-In system. Thus, Au(55) clusters may play a significant role in the design of nanoscaled devices where chemical inertness is of crucial importance.     

Nanotechnology for sustainability: what does nanotechnology offer to address complex sustainability problems?

Nanotechnology is widely associated with the promise of positively contributing to sustainability. However, this view often focuses on end-of-pipe applications, for instance, for water purification or energy efficiency, and relies on a narrow concept of sustainability. Approaching sustainability problems and solution options from a comprehensive and systemic perspective instead may yield quite different conclusions about the contribution of nanotechnology to sustainability. This study conceptualizes sustainability problems as complex constellations with several potential intervention points and amenable to different solution options. The study presents results from interdisciplinary workshops and literature reviews that appraise the contribution of the selected nanotechnologies to mitigate such problems. The study focuses exemplarily on the urban context to make the appraisals tangible and relevant. The solution potential of nanotechnology is explored not only for well-known urban sustainability problems such as water contamination and energy use but also for less obvious ones such as childhood obesity. Results indicate not only potentials but also limitations of nanotechnology??s contribution to sustainability and can inform anticipatory governance of nanotechnology in general, and in the urban context in particular.     

Results from PAMELA,ATIC and FERMI: Pulsars or dark matter?

It is well known that dark matter dominates the dynamics of galaxies and clusters of galaxies. Its constituents remain a mystery despite an assiduous search for them over the past three decades. Recent results from the satellite-based PAMELA experiment show an excess in the positron fraction at energies between 10 and 100 GeV in the secondary cosmic ray spectrum. Other experiments, namely ATIC, HESS and FERMI, show an excess in the total electron (e ⁺ + e ⁻) spectrum for energies greater than 100 GeV. These excesses in the positron fraction as well as the electron spectrum can arise in local astrophysical processes like pulsars, or can be attributed to the annihilation of the dark matter particles. The latter possibility gives clues to the possible candidates for the dark matter in galaxies and other astrophysical systems. In this article, we give a report of these exciting developments.     

Running coupling: does the coupling between dark energy and dark matter change sign during the cosmological evolution?

In this paper we put forward a running coupling scenario for describing the interaction between dark energy and dark matter. The dark sector interaction in our scenario is free of the assumption that the interaction term Q is proportional to the Hubble expansion rate and the energy densities of dark sectors. We only use a time-variable coupling b(a) (with a the scale factor of the universe) to characterize the interaction Q. We propose a parametrization form for the running coupling b(a)=b ₀ a+b _e (1−a) in which the early-time coupling is given by a constant b _e , while today the coupling is given by another constant, b ₀. For investigating the feature of the running coupling, we employ three dark energy models, namely, the cosmological constant model (w=−1), the constant w model (w=w ₀), and the time-dependent w model (w(a)=w ₀+w ₁(1−a)). We constrain the models with the current observational data, including the type Ia supernova, the baryon acoustic oscillation, the cosmic microwave background, the Hubble expansion rate, and the X-ray gas mass fraction data. The fitting results indicate that a time-varying vacuum scenario is favored, in which the coupling b(z) crosses the noninteracting line (b=0) during the cosmological evolution and the sign changes from negative to positive. The crossing of the noninteracting line happens at around z=0.2–0.3, and the crossing behavior is favored at about 1σ confidence level. Our work implies that we should pay more attention to the time-varying vacuum model and seriously consider the phenomenological construction of a sign-changeable or oscillatory interaction between dark sectors.     

The effect of climate on acoustic signals: does atmospheric sound absorption matter for bird song and bat echolocation?

The divergence of signals along ecological gradients may lead to speciation. The current research tests the hypothesis that variation in sound absorption selects for divergence in acoustic signals along climatic gradients, which has implications for understanding not only diversification, but also how organisms may respond to climate change. Because sound absorption varies with temperature, humidity, and the frequency of sound, individuals or species may vary signal structure with changes in climate over space or time. In particular, signals of lower frequency, narrower bandwidth, and longer duration should be more detectable in environments with high sound absorption. Using both North American wood warblers (Parulidae) and bats of the American Southwest, this work found evidence of associations between signal structure and sound absorption. Warbler species with higher mean absorption across their range were more likely to have narrow bandwidth songs. Bat species found in higher absorption habitats were more likely to have lower frequency echolocation calls. In addition, bat species changed echolocation call structure across seasons, using longer duration, lower frequency calls in the higher absorption rainy season. These results suggest that signals may diverge along climatic gradients due to variation in sound absorption, although the effects of absorption are modest.     

Nanotechnology between the lab and the shop floor: what are the effects on labor?

Nanotechnology’s effects on labor and employment have received little attention within research and debates on the social implications of nanotechnology. This article shows that, in spite of its incipient development, nanotechnology is unquestionably moving toward manufacturing, involving a still very small but increasing component of the labor force. Based on secondary data and the literature review, I compose a picture of the emerging jobs in nanotechnology and highlight four emerging trends in nanotechnology workers’ skills requirements. I show that, in addition to job creation, nanotechnology diffusion is likely to pose labor market changes that may be disruptive for some categories of workers.     

Nanotechnology as an experiment in democracy: how do citizens form opinions about technology and policy?

This article analyzes nanotechnology as an experiment in democratic deliberation, one that seems motivated both by a desire to improve deliberative democracy and to protect the technology from undue public interference. However, rather than involving amplified (overstated) risks, nanotechnology appears to involve attenuated (understated) risks. Results from a 3-year panel study are presented to illustrate the ways in which citizens form opinions about nanotechnology, supporting the assertion that public opinion about complex technology can be both reasonable and stable. Nevertheless, the authors also voice concern that, in the absence of public pressure, risk regulation may not evolve as swiftly as it should to protect both society and industry.     

Diode-pumped single-frequency-Nd:YGG-MOPA for water–vapor DIAL measurements: design, setup and performance

A diode-pumped Q-switched and injection-seeded single-frequency laser, generating tunable laser radiation at 935 nm, is presented. Using Nd:YGG (Y₃Ga₅O₁₂) as the active medium, the laser that was developed to serve as a transmitter for water–vapor lidar measurements. The configuration consists of a stable resonator in rod geometry that is injection seeded by a narrowband diode laser and stabilized by the ramp-and-fire technique. Energy scaling was done in a power amplifier in slab geometry. Both oscillator and amplifier crystal were diode pumped at 806 nm. More than 30 mJ pulse energy at 100 Hz repetition rate with a beam propagation factor of M²<1.4 and pulse duration of 52 ns in single-frequency mode were generated. To our knowledge this is the first direct generation of 935 nm Q-switched pulses from Nd:YGG suitable for water–vapor measurements. The reported results show great promise of this laser in applications where high efficiency and reduced complexity is indispensable, such as for spaceborne or airborne water–vapor lidar instruments.     

Piano hammers and their force compression characteristics: does a power law make sense?

We have studied the force characteristics of a collection of piano hammers, through studies of the acceleration of the hammer head, the force due to the compression of the hammer felt, Fh, and the associated bending of the hammer shank which occurs when a hammer strikes a rigid object. By integration of the acceleration one can estimate the compression of the felt, and thus obtain a force-compression Fh(z) relationship; our results for this function are compared with previous experiments and theoretical models. Close examination of our findings suggests that bending of the hammer shank, and also the time required for the force to be transmitted from the outer edge of the hammer to its core, play significant roles in the hammer dynamics. The data are used to estimate the quantitative impact of these effects on the derived Fh(z) relation. The implications for physical modeling of a piano tone are briefly discussed.     

Crystal growth, spectroscopy, and diode pumped laser performance of Pr,?Mg:SrAl12O19

Polarization dependent ground state absorption, excited state absorption and emission cross sections of Pr,?Mg:SrAl₁₂O₁₉ are determined in the visible and ultraviolet spectral region. It is shown that excited state absorption to the 4f5d configuration does neither occur on the pump wavelength in the blue region nor on any of the visible laser transitions. Efficient laser action at 643.5?nm is demonstrated with slope efficiencies of up to 47% with respect to the absorbed pump power. Output powers up to 75?mW are achieved by pumping with an InGaN laser diode at 444?nm.     

High density,high performance optical data storage via volume holography: Viability at last?

The long held promise of using volume holography to deliver high performance optical storage is reviewed. The problems, which limited the development for many years, are accessed. Finally, we describe a series of innovations, which may make the technology viable at last.     

Butanol–acetone mixture blended with cottonseed biodiesel: Spray characteristics evolution,combustion characteristics,engine performance and emission

Increasing energy demands and more stringent legislation relating to pollutants such as nitrogen oxide (NO_x) and carbon monoxide (CO) from fossil fuels have accelerated the use of biofuels such as biodiesel. However, current limitations of using biodiesel as an alternative fuel for CI engines include a higher viscosity and higher NO_x emissions. This is a major issue that could be improved by blending biodiesel with alcohols. This paper investigates the effect of a butanol–acetone mixture (BA) as an additive blended with biodiesel to improve the latter's properties. Macroscopic spray characteristics (spray penetration, spray cone angle and spray volume) were measured in constant volume vessel (CVV) at two injection pressures. A high-speed camera was used to record spray images. The spray's edge was determined using an automatic threshold calculation algorithm to locate the spray outline (edge) from the binary images. In addition, an engine test was carried out experimentally on a single-cylinder diesel engine. The engine's performance was measured using in-cylinder pressure, brake power (BP) and specific fuel consumption (SFC). Emission characteristics NO_x, CO and UHC were also measured. Neat biodiesel and three blends of biodiesel with up to 30% added BA were tested. The experimental data were analyzed via ANOVA to evaluate whether variations in parameters due to the different fuels were significant. The results showed that BA can enhance the spray characteristics of biodiesel by increasing both the spray penetration length and the contact surface area, thereby improving air–fuel mixing. The peak in-cylinder pressure for 30% BA was comparable to neat diesel and higher than that of neat biodiesel. Brake power (BP) was slightly improved for 10% BA at an engine speed of 2000 rpm while SFC was not significantly higher for any of the BA-biodiesel blends because of the smaller heating value of BA. Comparing the effect on emissions of adding BA to biodiesel, increasing the amount of BA reduced NO_x and CO (7%) and (40%) respectively compared to neat biodiesel, but increased UHC.     

Electrostatics and nanoparticles: What's the same,what's different?

This paper provides a brief review of the status of research in the field of solid nanoparticles. The field may be divided into the broad categories of particle creation, utilization, and manipulation. Several examples are provided for gas- and liquid-phase production of particles, as well as the many uses found for them in manufacturing, microelectronics, and medicine. Electrostatic self-assembly, a phenomenon that occurs in liquids, is discussed as a method for producing uniquely tailored structures. The use of nanoparticles as vehicles for the transdermal administration of medicaments and vaccines is also presented as a topic of ongoing research.     

Diode pumped Ho:YAG and Ho:LuAG lasers, Q-switching and?second harmonic generation

Direct diode pumped Ho:YAG generated laser pulses at 2.12???m with an optical to optical slope efficiency of 0.24. Ho:YAG and Ho:LuAG laser rods were evaluated with both wide and narrow bandwidth pump diodes. The laser wavelength varies with the level of pumping and optical design. This variation was found to be predictable. Second harmonic at 1.06???m was produced in a 6.0?mm long BBO crystal.