用大孔氨甲基聚苯乙烯树脂选择性吸附分离茶多酚和咖啡因

3种市售树脂ADS-5、ADS-8和ADS-17对茶多酚和咖啡因的混合物水溶液的吸附表明,具有弱极性的ADS-8对茶多酚的吸附量最大.随着树脂极性的增加(ADS-5＜ADS-8＜ADS-17),从混合物中对茶多酚的选择性吸附作用增加,表明对茶多酚的吸附可能包含疏水作用和氢键,而对咖啡因的吸附为疏水作用.在此基础上,合成了不同交联度(8%～26%DVB)的大孔氨甲基聚苯乙烯树脂,这些树脂具有疏水基质和可与酚类化合物形成较强氢键的氨基.对茶多酚和咖啡因的混合物溶液的吸附表明,这些树脂对茶多酚具有高吸附量和高吸附选择性.交联度为10%的大孔氨甲基聚苯乙烯树脂对茶多酚具有最大的吸附量,交联度为22%的大孔氨甲基聚苯乙烯树脂对茶多酚具有最大的吸附选择性.     

大豆乳清废水中异黄酮吸附的影响因素分析

实验研究和理论分析表明：吸附原料液的溶液体系非常复杂，其中大豆异黄酮含量很低，而干扰溶质种类多且含量高，所以在应用大孔树脂时大豆异黄酮的吸附分离中会同时存在多种不利因素．其中的大豆乳清蛋白、大豆低聚糖和大豆皂甙各自由于不同的原因而可能对大豆异黄酮的吸附产生较大的影响．在分析了这些影响因素的基础上，经实验研究所开发的“两级吸附”工艺充分发挥了大豆异黄酮的吸附优势，得到了纯度高于42％的大豆异黄酮产品，树脂吸附的回收率在75％以上．     

不同树脂对瓜果腐霉代谢产物中除草活性成分的吸附分析

利用HPD400、HPD500、HPD600、HPD700、HPD850、ADS-17、D101、DM130大孔吸附树脂对瓜果腐霉培养滤液中除草活性成分的吸附情况进行了研究,通过对树脂吸附后的流出液和洗脱液的浓缩物进行HPLC检测分析,确定了其除草活性成分。实验发现,在所选择的8种树脂中以HPD500、HPD850、HPD600、ADS-17对除草活性成分的吸附能力最强,其中以HPD500和HPD600树脂的10%的乙醇洗脱液中除草活性成分含量最高。综合结果表明,以HPD500树脂作为吸附瓜果腐霉培养滤液中除草活性成分的适宜树脂。研究发现,HPD500树脂对除草活性成分吸附和解吸附的最佳条件是:吸附最适温度为20℃,树脂吸附饱和度为33.75mL/g,较适宜吸附流速为2BV/h,较适宜脱附流速为1BV/h,洗脱剂浓度为10%乙醇,洗脱剂用量为2.5BV。     

大孔树脂对大豆乳清废水中异黄酮的吸附特性研究

通过比较10种大孔吸附树脂对大豆乳清中异黄酮的吸附特性发现，弱极性和非极性吸附树脂有利于大豆乳清中异黄酮的吸附．研究结果表明，D312和AB-8树脂对异黄酮的吸附量大，解吸容易、可以应用于大豆乳清废水资源化工艺之中．适宜的操作条件为温度20℃左右、pH值7．5左右．     

二乙烯苯-异氰酸三烯丙基酯-丙烯腈共聚物大孔树脂对原花青素的吸附

根据原花青素含有疏水性的苯环和酚羟基的特点,设计合成了含有苯环和酰胺基的大孔二乙烯苯-异氰酸三烯丙基酯-丙烯腈(DTA)共聚物吸附树脂,DTA树脂通过疏水作用和氢键吸附原花青素.比较了DTA吸附树脂和3种商品化吸附树脂ADS-5(非极性)、ADS-8(弱极性)和ADS-17(中极性)对原花青素的吸附性能.结果表明,DTA、ADS-8、ADS-17对原花青素的吸附既包含疏水作用又有氢键参与.在合适的单体和致孔剂配比情况下合成的DTA吸附树脂对原花青素有很好的吸附性能.     

大孔吸附树脂提取青蒿素的研究

探讨了大孔吸附树脂提取青蒿素的方法。以青蒿素的吸附量,青蒿素含量,青蒿素收率和提取率为考察指标,确定大孔吸附树脂提取青蒿素的工艺条件。研究结果表明,ADS-17树脂对青蒿素的吸附量大,解吸容易,可用于提取黄花蒿中青蒿素的工业化生产,其工艺条件为:青蒿素最大吸附量为112.30mg/g,吸附流速为2BV/h,洗脱剂为90%乙醇,解吸流速为2BV/h,青蒿素含量大于99%,收率高达0.3%,提取率高达75%以上。     

非水体系中磺酸铜型树脂对有机碱的配位吸附

研究了磺酸铜型树脂在乙醇、乙酸乙酯和正己烷中对苯胺、N 甲基苯胺和N ,N 二甲基苯胺的吸附规律 ,并与水中的结果相对照 .树脂在正己烷中对苯胺等的吸附量最大 ,在乙醇、乙酸乙脂和水中依次减小 .在4种不同的介质中 ,树脂对苯胺的吸附均表现出相同的吸附选择性 ,即对苯胺的吸附亲合性最大 ,N ,N 二甲基苯胺最小 .在不同的介质中 ,树脂对苯胺的吸附基本符合Freundlich吸附方程 ,并计算了在不同介质中对苯胺吸附的吸附焓 .在水中 ,吸附速率最高 ,在乙醇、乙酸乙酯和正己烷中 ,吸附速率依次降低     

新型含吡啶基树脂对甜菊糖中莱鲍迪甙A的富集与分离

研究了含吡啶功能基大孔吸附树脂对甜菊糖的吸附量与吸附选择性作用 .分析了树脂极性及不同骨架结构对吸附选择性的影响 .并分别通过甲醇或乙醇的选择性洗脱及树脂动态吸附分离两种方法研究树脂对甜菊糖中莱鲍迪甙A的富集作用 .结果表明 ,树脂动态分离法可以有效地从高甜菊甙甜菊糖中分离富集出高莱鲍迪甙A产品 ,该方法具有一定的工业应用前景 .     

大孔树脂分离纯化藏药白花龙胆花总黄酮的研究

考察了HPD-826、HPD-417、ADS-17、HPD-722、HPD-450、AB-8、HPD-600、D-101,共8种大孔树脂对藏药白花龙胆花总黄酮的吸附和解吸性能,通过静态吸附量和解吸附率及静态吸附曲线的绘制,筛选出AB-8树脂的效果最佳;以AB-8树脂为目标,进行了动态吸附实验,考察了上柱液浓度、pH值、上柱液流速、乙醇浓度、解吸剂流速、解吸体积等对AB-8树脂吸附和解吸效果的影响,确定出AB-8树脂动态吸附白花龙胆花总黄酮的最佳条件:上柱液浓度为6.5mg/mL,pH为3.79,上柱流速4BV/h;最佳洗脱条件:用50%乙醇进行洗脱,解吸流速为3BV/h,解吸体积4BV。在此条件下,白花龙胆花总黄酮纯度由原来的22.10%,变为65.75%,产品精制倍数为65.75%/22.10%=2.97,表明AB-8树脂可用于白花龙胆花总黄酮的分离纯化。     

大孔吸附树脂分离纯化金银花绿原酸研究

以金银花粗提物为原料,比较了NKA-2、D1400、聚酰胺、HP2MGL、ADS-21、D101及AB-8 7种大孔吸附树脂对金银花绿原酸静态吸附与解吸的效果,并通过单因子实验、正交试验与验证实验,优化了树脂分离纯化金银花绿原酸的工艺技术参数.结果表明,NKA-2树脂吸附效果最好,静态饱和吸附量可达212.17 mg/...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).