吸声材料对水下小平台上矢量传感器声学特性的影响研究

本文围绕粘贴黏弹性吸声材料方法对水下小平台上安装矢量传感器的指向性和测向的影响展开理论分析和实验研究.首先建立了吸声材料和平台结构组成的复合层结构的数学模型,对声波经过复合层结构的声学特性进行了分析,在此基础上利用有限元耦合边界元法对粘贴吸声材料前后的水下小平台上的矢量传感器的声学特性进行研究.通过理论计算和数值分析研究了吸声材料对矢量传感器的各通道的指向性的影响,并计算了覆盖吸声材料前后矢量传感器的测向精度.水池实验验证了分析结果的正确性.     

第六讲水下声学传感器网络的发展和应用

文章主要介绍了正在发展中的水下声学传感器网络的一些概念和发展现状.在回顾了水声通信和水下网络的发展历史之后,首先从网络拓扑结构出发,指出多跳对等网络是适合于水声应用的一种网络结构,接着根据网络协议栈的概念,说明水下声学传感器网络在各协议层上所涉及的问题,并从物理层面,分析了水声介质的特殊性,和水下声学传感器网络所面临的一些主要的技术挑战.介绍了组成水下传感器网络的关键部件,以美国海网（Seaweb）为例,给出了一个水声传感器网实现的实例,对它的年度实验进行了介绍,最后,给出了中国未来的发展应用前景.     

水下声传播的发展及其应用

文章介绍了水声学中的基础研究领域水下声传播影响因素和研究进展,分析了海洋环境因素对水下声传播的影响机理,给出了不同类型海域以及不同季节的水下声传播特征。文章还列举了目前水下声传播研究的热点问题：水下三维声传播和复杂海洋环境下的水下声传播不确定性研究,并阐述了它在目标探测研究中的应用。最后文章着重讨论了水下声传播的重要应用之一——自适应匹配场处理技术。     

经典局域共振型水声超材料的吸隔声性能研究*

基于水声超材料吸声机理和多层平行介质平面波理论,建立局域共振型水声超材料结构,通过COMSOL进行建模计算,研究该结构的吸声性能机理,此外为了验证钢背衬的隔声性能,在该水声超材料结构基础上添加一层0.005m厚的钢背衬进行仿真对比。研究结果表明,在频段为200Hz-4000Hz时,水声超材料声学性能较好,吸声性能整体较优,且添加钢背衬的水声超材料隔声性能较优,甚至在某频率点达到15dB的隔声差值;此外通过位移场图进一步揭示水声超材料的吸声机理,发现水声超材料结构的位移场和钢背衬都对吸声性能会产生影响,钢背衬通过影响共振吸收来影响吸声性能,而位移场则通过位移幅度大小影响吸声性能。     

Wide-band underwater acoustic absorption based on locally resonant unit and interpenetrating network structure

The interpenetrating network structure provides an interesting avenue to novel materials. Locally resonant phononic crystal (LRPC) exhibits excellent sound attenuation performance based on the periodical arrangement of sound wave scatters. Combining the LRPC concept and interpenetrating network glassy structure, this paper has developed a new material which can achieve a wide band underwater strong acoustic absorption. Underwater absorption coefficients of different samples were measured by the pulse tube. Measurement results show that the new material possesses excellent underwater acoustic effects in a wide frequency range.Moreover, in order to investigate impacts of locally resonant units,some defects are introduced into the sample. The experimental result and the theoretical calculation both show that locally resonant units being connected to a network structure play an important role in achieving a wide band strong acoustic absorption.     

水声通信技术综述

文章介绍了水声学中的基础研究领域水下声传播影响因素和研究进展,分析了海洋环境因素对水下声传播的影响机理,给出了不同类型海域以及不同季节的水下声传播特征。文章还列举了目前水下声传播研究的热点问题：水下三维声传播和复杂海洋环境下的水下声传播不确定性研究,并阐述了它在目标探测研究中的应用。最后文章着重讨论了水下声传播的重要应用之一——自适应匹配场处理技术。     

一种含圆柱形谐振散射体的黏弹材料低频吸声机理研究

利用层多重散射法分析了一种含圆柱形谐振散射体黏弹 材料吸声层在钢背衬条件下的低频吸声特性. 该吸声层由包覆软材料的圆柱空腔周期嵌入橡胶材料中构成, 其中, 散射体轴线与吸声层平行. 结果表明, 20 mm厚吸声层在1000–3000 Hz具有良好的吸声性能. 通过综合分析单个散射体的吸收截面、单层周期散射体的声吸收、 结构内部位移场以及耗散功率密度分布, 揭示了该吸声层的低频吸声机理. 关键词： 水声吸声 吸收截面 耗散功率密度     

内嵌不同形状散射子的局域共振型黏弹性覆盖层低频吸声性能研究

最近研究表明,将声子晶体中的局域共振现象引入到水下吸声材料的设计中,可以观察到由局域共振引起的低频声吸收现象.为了进一步揭示局域共振低频吸声机理并获得更优的水下低频声吸收性能,研究了内嵌不同形状散射子的黏弹性声学覆盖层.利用晶格和散射子在空间排布的对称性,传统有限元方法得到简化,从而节约了计算时间和存储空间,并通过将简化有限元法计算得到的结果与传统有限元法计算的结果进行对比,验证了简化有限元方法的正确性.结合位移云纹图,考察了特定频率点上振动模态与相应的局域共振吸声峰之间的关系,揭示了内嵌圆柱形散射子的黏弹性覆盖层的吸声机理.进一步讨论了相同体积下不同形状的圆柱形散射子对黏弹性覆盖层吸声性能的影响,给出了提升覆盖层低频吸声性能的优化思路.通过讨论不同芯体材质对内嵌圆柱形散射子的黏弹性覆盖层吸声性能的影响,找到了改变第一共振峰位置的方法,从而可以通过调整第一共振峰来实现特定频率范围内的宽带吸声.     

水声通信网络快速重构路由协议技术的研究

本文针对水声通信特点,在按需距离矢量(AODV)路由协议的基础上,提出了一种旨在缩短路由重构时间的按需距离矢量(RB-AODV)路由协议。该协议解决了水声通信网络中,由中间节点的移动而引起的路由失效问题。通过检测到移动节点的中间节点进行本地路由修复重构的过程,避免了由源节点重新启动路由发现过程,从而大大节省了信道带宽。仿真结果表明,该RB-AODV路由协议可以降低丢包率、增大网络吞吐量,缩短路由重构时间并提高信道利用率。     

水下目标弹性声散射信号分离

水下目标弹性声散射与其他声散射成分在时域和频域上均存在混叠, 现有信号处理方法受分辨力限制无法在混叠状态下识别目标弹性声散射特征. 针对这个问题, 提出了一种目标弹性声散射信号分离方法. 以目标回波亮点模型为基础, 分析了线性调频信号入射时目标声散射成分的信号特性, 提出了一种目标声散射成分向单频信号的映射方法, 并理论推导出了目标声散射结构与映射结果之间的线性对应关系, 实现了通过窄带滤波分离出目标弹性声散射成分. 仿真与消声水池实验数据处理结果表明, 该方法基本可以完全分离出目标回波信号中的弹性声散射成分, 分离出的弹性声散射具有与理论一致的信号特征, 验证了该分离方法的有效性.     

水声通信加权反馈双向Turb均衡器

为了提升自适应双向Turbo均衡器的收敛速度及降低误比特率,提出了采用加权反馈的双向Turbo均衡算法。首先在单个均衡器反馈输入中采用后验均值与先验均值混合的反馈方案,有效提升一轮迭代中均衡器输出的准确性;其次通过后验均值与先验均值的加权合并作为另一均衡器反馈的非因果项输入,在提升反馈输入准确性的同时提升了数据的利用率;最后在权值迭代中采用优化的比例归一化最小均方算法,提升训练阶段均衡器收敛速度。千岛湖试验中,在同样3.75 kbps通信速率的情况下,该方法误比特率仅为传统双向Turbo均衡器的1/3。仿真和试验数据表明,均衡器要达到同样的误比特率,本方法所需迭代轮数更少,在时变信道中系统稳定性更好,误比特率更低,提升了水声通信效率。     

Measurement of sound absorption by underwater acoustic material using pulse-separation method

An alternative pulse-separation method is presented for measuring the sound absorption at normal incidence of an underwater acoustic material in a water-filled impedance tube. A damped sine pulse was generated in the water-filled impedance tube with a regular waveform and a short duration time of approximately 1 ms. During the generation of the pulse, the inverse filter principle was used to compensate for the transducer response. In addition, the effects of the characteristics of the tube termination can be eliminated during the generation of the pulse to obtain a single plane pulse wave in the impedance tube, which is a necessary condition for this technique. Measurements of the sound absorption coefficient of the rubber material and the reflection coefficient from a water/air interface were used to verify the pulse-separation method.     

Backing effects on the underwater acoustic absorption of a viscoelastic slab with locally resonant scatterers

Backing effects on the underwater acoustic absorption of a viscoelastic polymer slab embedded with locally resonant scatterers are reported. The polymer slab is embedded with two layers of locally resonant scatterers, i.e. Al spheres coated by soft silicon rubber. Theoretical absorption coefficients of the polymer slab under different backings using a layer multiple scattering method show good agreement with the experimental results, which supports unambiguously the experimental observation. Then relations between the resonance modes and the low-frequency absorption peaks of the composite slab are clarified to address the absorption mechanisms. It shows that the mass of the steel backing affects evidently the low-frequency absorption, the absorption peak shifts to lower frequency range while increasing the backing mass.     

一种利用海豚叫声的仿生水声通信方法

针对水下通信隐蔽性的需求, 克服传统固定载波调制方式带来的声源暴露问题, 提出一种基于海豚叫声的仿生伪装水声通信方法, 使通信信号被当作海洋生物噪声排除, 达到隐蔽通信的效果. 研究了海豚叫声信号特点, 利用海豚哨声信号实现同步与识别, 采用差分脉冲位置调制方法, 信息调制在相邻海豚嘀嗒声信号的时间间隔, 采用压缩传感体制下的匹配追踪技术估计信道, 虚拟时反技术实现信道均衡. 湖试结果验证了该方法的有效性和可行性, 接收声信号与发射信号声音上具有很高的相似度, 可以达到伪装隐蔽的效果. 实验中水平距离2 km, 通信速率不小于29 bps时,误码率可以达到10^-4以下. 关键词： 水声通信 仿生 海豚 隐蔽     

黏弹性材料的动态力学特性及其对覆盖层吸声性能的影响

本文利用标准化动态力学测量手段获得了某种高分子聚合物的动态杨氏模量,并根据时温等效原理对动态杨氏模量与声学测量在频段上的差异加以分析和转换,得到了500—7500 Hz频率范围内该黏弹性材料杨氏模量随频率变化的特性.基于所测得动态杨氏模量,采用有限元方法分析了均匀黏弹材料的吸声性能,并将仿真结果与样品声管实验数据进行对比,验证了测试所得参数的准确性.进一步仿真分析了含有局域共振结构的声学覆盖层吸声性能,并讨论了黏弹性材料的动态特性对其吸声性能的影响,提出了改进水声覆盖层低频宽带吸声特性的建议.     

Utilization of coir fiber in multilayer acoustic absorption panel

Coconut is one of the most important harvests in Malaysia. Industrial prepared coir fiber is obtained from coconut husk combined with latex and other additives to enhance its structural characteristics. Unfortunately, such inevitable process diminishes the acoustical features of material. Previous studies on industrial coir fiber and fiber-air gap layers showed that low frequency absorptions needed improvements. Therefore perforated plate (PP) was added to the multilayer structure to further enhance the sound absorption in this area. Analyses were accomplished through three PP modeling approaches (Allard, Beranek and Ver, Atalla and Sgard) and Allard Transfer Function (TF) method. Experiments were conducted in impedance tube to support the analytical results. Outcomes showed that Allard TF method was generally closer to measurement values and implemented for additional analyses. Two possible conditions of putting PP in front of fiber layer or between fiber-air gap layers were investigated. Both arrangements were suitable to enhance the sound absorption. Although, when PP was backed by coir fiber and air gap, porosity of the plate had great influence in adjusting the amount of low frequency absorption. Result derived that PP might improve the low frequency absorption of coir fiber but at the same time the medium frequency absorption was reduced. This effect was noticed previously in coir fiber-air gap structures while the air gap thickness increased. The advantage of using PP was that it assisted in greatly reducing the air gap thickness under the same acoustical performance. Hence it is an efficient tool to reduce the thickness of acoustic isolators in practical purposes.     

基于单矢量有源平均声强器的码分多址水声通信

基于单矢量传感器对码分多址水声通信进行了研究. 利用单个矢量传感器自身指向性进行方位估计最为常用的方法是平均声强器和复声强器, 但这些方法对于同频带的多用户来说, 理论极限仅能测量两个用户. 提出了有源平均声强器, 利用扩频通信中伪随机码优良的自相关和互相关特性, 可同时测得多个用户的方位, 利用估计的用户方位构建矢量组合, 调整矢量传感器的指向性, 实现各用户定向通信, 抑制多址干扰, 增加处理增益, 降低误码率. 对频带相同的扩频多用户通信进行了仿真及试验研究, 验证了有源平均声强器的有效性和实用性.     

基于单矢量有源平均声强器的码分多址水声通信

基于单矢量传感器对码分多址水声通信进行了研究. 利用单个矢量传感器自身指向性进行方位估计最为常用的方法是平均声强器和复声强器, 但这些方法对于同频带的多用户来说, 理论极限仅能测量两个用户. 提出了有源平均声强器, 利用扩频通信中伪随机码优良的自相关和互相关特性, 可同时测得多个用户的方位, 利用估计的用户方位构建矢量组合, 调整矢量传感器的指向性, 实现各用户定向通信, 抑制多址干扰, 增加处理增益, 降低误码率. 对频带相同的扩频多用户通信进行了仿真及试验研究, 验证了有源平均声强器的有效性和实用性.     

OFDM水声通信系统中基于中继选择的资源分配算法

针对水声通信中继系统中系统容量和中继选择问题,本文提出了一种基于中继选择的资源分配算法。首先将每条中继链路的信道增益等效为虚拟直传链路的信道增益,然后在等功率分配的前提下,根据信道信息最佳原则,提出了一种中继选择及资源分配的多用户迭代算法,以实现对每个用户的传输链路进行选择和子载波分配,最后通过线性迭代注水算法进行功率分配。仿真结果表明,所提算法在保证目标速率的前提下,提升了系统容量。     

Parallel optimization of underwater acoustic models: A survey

Underwater acoustic models are effective tools for simulating underwater sound propagation. More than 50 years of research have been conducted on the theory and computational models of sound propagation in the ocean. Unfortunately, underwater sound propagation models were unable to solve practical large-scale three-dimensional problems for many years due to limited computing power and hardware conditions. Since the mid-1980s, research on high performance computing for acoustic propagation models in the field of underwater acoustics has flourished with the emergence of high-performance computing platforms, enabling underwater acoustic propagation models to solve many practical application problems that could not be solved before. In this paper, the contributions of research on high-performance computing for underwater acoustic propagation models since the 1980s are thoroughly reviewed and the possible development directions for the future are outlined.