聚丙烯酰胺/纳米SiO2复合凝胶的制备及初步研究

利用原位自由基聚合方法合成了聚丙烯酰胺/纳米SiO2复合凝胶,并用红外光谱测定了凝胶化过程中几个典型的反应阶段的红外光谱图,结果表明,复合材料在凝胶化过程中,不仅存在聚合交联反应,同时内部还可能有氢键的形成或其他一些化学作用.用光学显微镜观察了不同纳米粒子含量的复合凝胶的表面形貌,研究表明,纳米粒子在凝胶中并没有出现团聚,表面仍为均匀体系.     

Synthesis,Photophysical Properties and Application of New Porphyrin Derivatives for Use in Photodynamic Therapy and Cell Imaging

New derivatives of tetrakis(4-carboxyphenyl) porphyrin were designed, synthesized and characterized by IR, proton NMR and mass spectroscopy. The ground and excited state nature of new derivatives were examined using UV-Vis. absorption and fluorescence spectroscopy, fluorescence quantum yield and fluorescence lifetime studies. The singlet oxygen quantum yield of each synthesized derivative of porphyrin was estimated for their further efficacy as potential photosensitizer in biological studies. The significant photophysical data of all synthesized derivatives was supplementary accessed to examine the cell imaging and cytotoxicity against two cancer cell lines viz. MBA-MD-231 and A375. The fluorescence lifetime, fluorescence quantum yield and efficiency of singlet oxygen generation suggests alkyl amine and alkyl hydrazide linked new porphyrin photosensitizers can be useful for PDT agent in cancer treatment.     

Poly(N-methylaniline)/Montmorillonite Composite: Chemical Synthesis,Characterization, and Application in Water Treatment

Poly(N-methylaniline)/montmorillonite (PNMA/MMT) composite particles were obtained by using a simple in situ chemical oxidative polymerization method in hydrochloric acid solutions. Fourier transform infrared (FTIR) spectra, UV-visible absorption spectra and scanning electron microscopy (SEM) were carried out to characterize the as-prepared PNMA/MMT composite. On the basis of spectroscopy and morphology analysis, the probable polymerization mechanism was proposed. The potential application of PNMA/MMT composite for removal of heavy metal ions, such as Cu²⁺ and Zn²⁺, in aqueous solution was also investigated.     

键合型铕-十一烯酸-硅橡胶复合材料的合成及其荧光性能

以铕-十一烯酸配合物和含氢硅油为原料,在铂催化剂作用下制备稀土有机硅加成产物。对产物进行红外光谱和核磁共振分析。结果表明,配合物键接在有机硅高分子主链上,加成产物为一种键合型的铕-十一烯酸-硅橡胶复合材料。荧光光谱分析确定复合材料的最佳激发波长为393 nm;最强发射波长为616 nm,为铕离子的特征发射。同时,随着铕离子浓度的增大,复合材料没有荧光猝灭现象。     

新型光动力学疗法光敏剂5-ALA-GNPs的制备及其光谱分析

通过聚二烯丙基二甲基胺盐酸盐和氯金酸制备阳离子纳米金,将纳米金和5-氨基乙酰丙酸(5-aminolevulinic acid, 5-ALA)通过静电吸附作用有效结合得到新型光敏剂。应用共振瑞利散射光谱, 紫外-可见吸收光谱, 透射电镜和激光散射等方法对其进行了表征。结果表明通过这种方法纳米金与5-ALA可以有效结合。这种新型光敏剂对提高光动力学疗法临床疗效具有重要指导意义。     

Cu-Fe-TiO2/膨润土复合光催化剂的表征及性能

以膨润土为载体,用溶胶-凝胶法制备了不同焙烧温度的Cu-Fe双金属掺杂的TiO2/膨润土复合光催化剂,采用XRD、TG-DSC和N2吸附技术对其结构进行了表征,通过光催化降解直接天蓝染料废水,考察了焙烧温度对催化剂光催化性能的影响.结果表明,当焙烧温度高于300℃时,催化剂中出现了锐钛矿型TiO2,掺杂的Cu2+、Fe3+可能进入了TiO2晶格取代了部分Ti4+,使其晶格产生了一定程度的畸变,形成了复合半导体,拓宽了TiO2的光谱响应范围,并且Cu2+、Fe3+掺杂的TiO2复合半导体进入了蒙脱石层间,与膨润土成功复合,增大了催化剂的比表面积并改善了催化剂的孔体积,提高了光催化剂活性和再生性.     

Tumor Microenvironment Adaptable Nanoplatform for O2 Self-Sufficient Chemo/Photodynamic Combination Therapy

Malignant proliferation of tumor cells induces abnormal tissue microenvironments, leading to therapeutic resistance and poor therapeutic outcome. In this paper, manganese dioxide (MnO₂) nanoshells are coated on a porphyrinic metal–organic framework of porous coordination network (PCN)-224 for doxorubicin (DOX) loading and hyaluronic acid (HA) modification to obtain an intelligent nanoplatform of PCN@MnO₂@DOX@HA (PMDH). Benefiting from the HA functionalization, PMDH prefers to accumulate in tumor sites and enhance the cellular uptake by CD44-overexpressed tumor cells. Subsequently, the internalized PMDH could catalyze the abundant H₂O₂ in cells into O₂ to relieve tumor hypoxia. Further, the MnO₂ nanoshells of PMDH could be degraded into Mn²⁺ for magnetic resonance imaging with glutathione reduction and the release of DOX. By integrating the O₂ self-sufficiency with glutathione reduction abilities, PMDH possesses highly potent chemo/photodynamic combination therapeutic effects against hypoxic tumors. Significantly, PMDH exhibits a good biocompatibility with a low cardiotoxicity and negligible systemic side effects, which provides a new insight in developing tumor microenvironment adaptable nanoplatforms for synergistic tumor theranostics.     

C60/SiO2/Chitosan复合纳米粒子的合成及其光致化学发光分析应用

采用反相微乳液纳米粒子合成方法制备了具有光致化学发光活性的C60/SiO2/Chitosan复合纳米粒子.光致化学发光研究显示该复合纳米粒子与鲁米诺的混合溶液能被波长为400 nm的光信号诱导产生鲁米诺的光致化学发光信号,且该发光信号可以被复合纳米粒子表面所吸附的DNA所抑制,据此发现,建立了检测小牛胸腺DNA的光致化学发光新方法.在最佳的实验条件下,光致化学发光信号强度与DNA浓度在1.0×10-9-1.0×10-8mol/L 之间表现出了良好线性.     

TiN/TiB2纳米复合材料的合成与性能

 结合高能球磨和高温高压实验技术,制备了块体TiN/TiB₂纳米复合材料。通过X射线衍射和拉曼光谱对材料的微观结构进行了研究。结果表明,采用金属Ti和六方BN为原料,在球磨过程和高温高压实验过程中,TiN先于TiB₂形成,球磨70 h后有少量的纳米晶TiN开始形成。在高温高压实验中,在样品腔的合成温度低于1 300 ℃时,没有TiB₂出现;当温度达到1 300 ℃后,合成出了TiN和TiB₂的复合材料。对所合成的块状材料的热膨胀性和导电性能进行了测试。     

荧光光谱用于光动力疗法中光敏剂光漂白特性研究

应用荧光光谱技术研究溶液中血卟啉单甲醚(HMME)的光漂白与光产物生成。以532 nm倍频Nd∶YAG激光器照射样品,功率密度为100 mW·cm-2,以光学多通道分析仪(OMA)采集荧光光谱。照光过程与荧光光谱采集同步进行。通过构建基本光谱与最小二乘拟合,由单条实测光谱中分解求得HMME荧光(613 nm)、光产物荧光(639 nm)及自体荧光的强度。HMME初始浓度不超过10 μg·mL-1时符合荧光-浓度线性函数关系。对照光过程的荧光光谱监测同时观察到HMME漂白、光产物生成与漂白,以及样品光学特性变化引起的自体荧光强度起伏。光产物漂白后的二次产物引起样品光学特性显著改变。所建立的荧光光谱探测系统与光谱分析方法可满足光敏剂漂白特性体外研究的需要,并为光动力治疗的剂量学在体监测提供有效研究方法。     

O-(硫杂蒽酮-[2]-基)-氧乙酸的合成、表征及与DNA作用的研究

合成了O-(硫杂蒽酮-[2]-基)-氧乙酸,并用元素分析、IR、1H NMR和13C NMR等方法对其结构进行了表征。用光谱学方法研究了该化合物与ct-DNA的相互作用。结果表明,在pH 7.38的模拟体液条件下,该化合物的紫外-可见吸收光谱随ct-DNA浓度的增加,表现出减色效应,使ct-DNA的圆二色谱正负峰的吸收强度有所降低。该化合物的荧光强度被ct-DNA显著猝灭,猝灭常数为1.25×104 L·mol-1,当ct-DNA的浓度在0～12.0 mg·L-1范围内变化时,荧光猝灭值与ct-DNA的浓度呈现良好的线性关系。该化合物对ct-DNA的检出限为1.63 mg·L-1。据此,O-(硫杂蒽酮-[2]-基)-氧乙酸是一种可用于测定ct-DNA浓度的新试剂,与ct-DNA的作用有嵌入和静电吸引两种方式。     

生物矿化法制备HgS/聚氨酯复合薄膜及其对Ba2+的传感性能

通过生物矿化法制备出HgS/聚氨酯纳米复合材料并用FTIR、SEM等对材料进行了表征. 研究发现聚氨酯分子可以控制HgS的成核和晶体生长. 聚氨酯的量子限域效应已通过紫外-可见光谱证实,在约291 nm处有明显的特征吸收峰. 荧光性能研究结果表明HgS/聚氨酯纳米粒子复合薄膜对Ba²⁺的存在十分敏感,少量的Ba²⁺会使荧光强度明显上升,水中常见离子几乎对此没有影响.     

单晶硅表面有机硅烷/Ag2O纳米微粒复合自组装膜的制备和表征

利用分子自组装成膜技术 ,在单晶硅表面制备了有机硅烷 /Ag2 O纳米微粒复合膜 .应用接触角测定仪、原子力显微镜和X射线光电子能谱仪分析表征了薄膜的组成和结构 .结果表明 ,通过硅烷偶联剂 3 氨丙基 三乙氧基硅烷在单晶硅基底表面的成功组装 ,获得了较为均匀的硅烷化表面 ,而Ag2 O纳米微粒可在硅烷化表面成功地进行组装 ,并呈亚单层排布     

聚氨酯/硫化银纳米复合材料的合成及荧光传感性能

通过生物矿化合成了聚氨酯/Ag2S纳米复合薄膜．通过傅里叶变换红外光谱研究、扫描量热法(DSC)、扫描电镜等方法研究了硫化银纳米粒子对复合薄膜物理性质的影响．用DSC 测定了复合材料的热 稳定性．通过对纳米复合材料荧光性能的研究发现薄膜对Ni(II)的存在非常敏感,少量Ni(II)离子的存在使得荧光光谱强度迅速增加．可以预测此复合薄膜可被开发成水溶液中Ni(II)的传感器．     

Au@TiO_2纳米核壳与HMME结合体的制备及其光动力疗效初探

光动力疗法(PDT)是一种高效、安全、微创的新型治疗方法,国产光敏剂血卟啉单甲醚(HMME)介导的光动力疗法由于其成分单一、单态氧产量高及光敏周期短,临床上已用于脑胶质瘤和鲜红斑痣的治疗。为了进一步提高光动力疗效,本研究基于晶种生长法制备稳定粒径均一的吸收峰在530nm的阳离子金纳米球。采用毒性低且阴离子电解活化作用强的聚(四-苯乙烯磺酸钠)(PSS)进行修饰。利用静电吸引力将钛源TiCl_3水解的TiOH~(2+)与其结合并氧化制备AuNP@TiO_2核壳,通过改变NaHCO_3量制得不同TiO_2壳层厚度的AuNP@TiO_2核壳,并进一步将其与HMME结合制备结合体。采用紫外-可见吸收光谱、红外光谱、激光纳米粒度仪和透射电镜对所制样品进行表征。结果表明新型的光敏剂粒径均匀,结构稳定。最后采用细胞实验验证了其光动力疗效。总之,该研究合成了新型的Au@TiO_2-HMME纳米光敏剂,通过人口腔表皮样癌细胞系KB细胞与新型核壳纳米结构的光动力作用,与纯HMME相比,在最优条件下可提高约35%的细胞杀伤率。     

复合空心立方银/金属纳米材料的制备及其SERS表征

本文用一锅法, 以立方银纳米材料为模板, 通过置换反应成功制备了空心的立方银/钯(Ag/Pd)、银/铂(Ag/Pt)和银/金(Ag/Au)纳米材料, 并将它们作为基底(以KSCN作为探针), 检测其SERS信号。     

Metal Nanoparticle Photocatalysts: Synthesis,Characterization, and Application

Metal nanoparticles (NPs) have emerged as a kind of new photocatalyst to drive various chemical reactions by visible‐light irradiation. A distinct advantage of metal NP photocatalysts is that their light absorption is not limited to a certain wavelength but instead they are able to utilize a broad range of wavelengths, constituting a large fraction of the solar spectrum. Metal NPs like gold, silver, and copper NPs can strongly absorb visible light due to the localized surface plasmon resonance (LSPR) effect. Recent developments have shown that the light absorption properties strongly depend on the shape, size, and particle–particle interactions of NPs, which directly influence their photocatalytic activities. In this review, an overview of the preparation of metal NPs photocatalysts with various morphologies is given along with a brief discussion of the relationship between the morphology/composition and optical properties. The latest photocatalytic applications of these morphologies are also presented, and some of the challenges for the development of metal NPs photocatalysts are provided.     

纳米氧化铁/膨润土催化剂的制备、表征及复相光降解罗丹明B的研究

钠基膨润土与羟基铁溶液反应,经过焙烧,制得性能良好的纳米复合型催化剂,结合比表面孔隙分析(BET)、X射线衍射谱(XRD)和高分辨扫描电镜(HRTEM)对催化剂的比表面积、晶相和粒度进行表征。用光度法对该催化剂降解染料罗丹明B进行了研究,详细考察了溶液起始pH值、H₂O₂浓度、催化剂用量和起始浓度对降解的影响以及催化剂的可重复使用性,紫外-可见光谱对降解过程进行跟踪检测,并对复相光助Fenton过程与均相光助Fenton过程进行了比较。结果表明,复合型催化剂具有很高的比表面积,铁以高催化活性的α-Fe₂O₃存在于复合催化剂中;在pH 3.0,催化剂浓度为0.3 g·L-1,H₂O₂浓度为10 mmol·L-1实验条件下,100 mL 2.5×10-5 mol·L-1罗丹明B,紫外光照射4 h后,紫外-可见光谱显示罗丹明B的特征峰消失,其脱色率和COD_Cr去除率分别为97%和71%,对该催化剂进行处理后,可以重复使用,复相光降解率要远大于均相光降解率。     

Preparation and Characterization of Nafion/Sulfonated SiO2 Molecular Sieve Composite Membranes

A Nafion/sulfonated SiO₂ molecular sieve composite membrane was prepared by solution casting with sulfonated SiO₂ molecular sieve as the modifier. The ATR/FT-IR results showed that sulfonated SiO₂ molecular sieve did not change the structure of the membrane. The SEM and XRD results showed that the molecular sieve was distributed uniformly in the membrane. The proton conductivity, methanol permeability, water content, and swelling degree were measured. Compared with Nafion membrane, the composite membrane had higher water content and proton conductivity and lower methanol permeability. The overall performance was the best when the content of sulfonated SiO₂ molecular sieve was 5 wt%. These results indicated that Nafion/sulfonated SiO₂ molecular sieve composite membranes would be excellent candidate membrane materials for direct methanol fuel cell (DMFC) applications.     

基于罗丹明B设计合成Cu2+化学传感器与光谱表征

利用罗丹明B肼合物与戊二醛通过缩合反应合成了一个新的化学传感器Ⅰ,其具有两个罗丹明B单元.通过优化实验条件,在CH3CN/H2O缓冲溶剂中,通过不同金属离子的滴定,证实了该化学传感器对Cu2+的选择性识别作用;通过紫外滴定实验,空白的传感器分子在550nm附近无吸收峰,Cu2+和传感器分子的结合使得在550nm有明显吸收.低浓度Cu2+滴定实验表明该化学传感器Ⅰ可以检测微摩尔含量的Cu2+.