A simple fluorescent chemosensor 5-(4-methylphenyl)-3-(5-methylfuran-2-yl)-1-phenyl-4, 5-dihydro-1H-pyrazole (PY) has been synthesized for the detection of Cd2+ ion.The fluorescent probe PY shows high selectivity for Cd2+in the presence of othermetal ions (Co2+, Cu2+, Hg2+, Mn2+, Zn2+, Fe3+, Pb2+, Ni2+, and Al3+). The fluorescence intensity of the PY has been strongly quenched with increasing concentration of Cd2+ (0–0.9 μM)via photoinduced electron transfer mechanism. The binding constant of Cd2+ to PY for the 1:1 complex isfound to be 5.3?×?105 M?1with a detection limit of 0.09 μM. The chemosensor was successfully applied for determination of Cd2+ in different water samples (tap, river, and bottled water) showing good recovery values in the range of 94.8–101.7% with RSD less than 3%. Density functional theory (DFT) calculations were also performed to investigate electronic and spectral characteristics which are quite agreeable with the experimental value. The results show that the synthesized fluorescent chemosensor shows good selectivity towards Cd2+ and can be readily applied for the detection of Cd2+ in real samples including water samples.
Graphical AbstractThe present study aimed to develop a carbon dots-based fluorescence (FL) sensor that can detect more than one pollutant simultaneously in the same aqueous solution. The carbon dots-based FL sensor has been prepared by employing a facile hydrothermal method using citric acid and ethylenediamine as precursors. The as-synthesized CDs displayed excellent hydrophilicity, good photostability and blue fluorescence under UV light. They have been used as an efficient “turn-off” FL sensor for dual sensing of Fe3+ and Hg2+ ions in an aqueous medium with high sensitivity and selectivity through a static quenching mechanism. The lowest limit of detection (LOD) for Fe3+ and Hg2+ ions was found to be 0.406 µM and 0.934 µM, respectively over the concentration range of 0-50 µM. Therefore, the present work provides an effective strategy to monitor the concentration of Fe3+ and Hg2+ ions simultaneously in an aqueous medium using environment-friendly CDs.
Graphical AbstractTo utilize the nanomaterials as an effective carrier for the drug delivery applications, it is important to study the interaction between nanomaterials and drug or biomolecules. In this study GSH functionalized Mn2+-doped CdTe/ZnS QDs has been utilized as a model nanomaterial due to its high luminescence property. Folic acid (FA) gradually quenches the FL of GSH functionalized Mn2+???doped CdTe/ZnS QDs. The Stern-Volmer quenching constant (Ksv), binding constant (Ks) and effective quenching constant (Ka) for the FA-QDs system is calculated to be 1.32?×?105 M?1, 1.92?×?105 and 0.27?×?105 M?1, respectively under optimized condition (Temp. 300 K, pH 8.0, incubation time 40 min.). The effects of temperature, pH, and incubation time on FA-QDs system have also been studied. Statistical analysis of the quenched FL intensity versus FA concentration revealed a linear range from 1?×?10?7 to 5.0?×?10?5 for FA detection. The LOD of the current nano-sensor for FA was calculated to be 0.2 μM. The effect of common interfering metal ions and other relevant biomolecules on the detection of FA (12.0 μM) have also been investigated. L-cysteine and glutathione displayed moderate effect on FA detection. Similarly, the common metal ions (Na+, K+, Ca2+ and Mg2+) produced minute interference while Zn2+ Cu2+ and Fe3+ exert moderate interference. Toxic metal ions (Hg2+ and Pb2+) produced severe interferences in FA detection.
Graphical abstract
GSH-Mn2+ CdTe/ZnS QDs based Fluorescence Nanosensor for Folic acid
Merocyanine dye based fluorescent organic compound has been synthesized for the detection of glutamine. The probe showed remarkable fluorescent intensity with glutamine through ICT (Intermolecular Charge Transfer Mechanism). Hence, it is tested for the detection of glutamine using colorimetric and fluorimetric techniques in physiological and neutral pH (7.2). Under optimized experimental conditions, the probe detects glutamine selectively among other interfering biomolecules. The probe has showed a LOD (lower limit of detection) of 9.6?×?10–8 mol/L at the linear range 0–180 µM towards glutamine. The practical application of the probe is successfully tested in human biofluids.
Graphical abstractThe development of a highly sensitive, selective, and efficient sensor for the determination and detection of Cr(III) ions remains a great challenge. Recently, some fluorescent chemosensors have been developed for the recognition of Cr(III) ions. But, the main drawbacks of the reported fluorescent chemosensors are the lack of selectivity and interference of anions and other trivalent cations. Herein, we designed and synthesized a novel thiazole-based fluorescent and colorimetric Schiff base chemosensor SB2 for the detection of Cr(III) ion by chemodosimetric approach. Using different analytical techniques including UV–vis, 13C-NMR, 1H-NMR, and FT-IR analysis the chemosensor SB2 was structurally characterized. The fully characterized chemosensor SB2 was used for the spectrofluorimetric and colorimetric detection of Cr(III) ions. Interestingly, chemosensor SB2 upon interaction with various metal cations including Ni2+, Na+, Cd2+, Ag+, Mn2+, K+, Zn2+, Cu2+, Hg2+, Co2+, Pb2+, Mg2+, Sn2+, Al3+ and Cr3+ displays highly selective and sensitive fluorescent (turn-on) and colorimetric (yellow to colorless) response toward Cr(III) ions. The fluorescence and UV–vis techniques confirmed the selective hydrolysis of azomethine group (-C?=?N-) of Schiff base chemosensor SB2 by Cr(III) ions. As a result, the fluorescence enhancement was observed that is corresponding to 2-hydroxy-1-nepthaldehyde (fluorophore). The chemosensor SB2 exhibits high interference performance towards Cr(III) ions over other metal cations in a wide pH range. Mover, the quite low detection limit was calculated to be 0.027 µg ml-1 (0.5 µM) (3σ/slop), lower than the maximum tolerable limits of Cr(III ions (10 µM) in drinking water permitted by the United States Environmental Protection Agency (EPA). These results show that chemosensor SB2 has great potential to detect selectively Cr(III) ions in the agricultural, environmental and biological analysis system.
Graphical AbstractA pyrene based probe associated with π···hole – hydrazone as one of the recognizing elements is synthesized and its turn in to a selective colorimetric and turn-on fluorescent sensor, (L3) for cyanide anion. This chemo sensor show high selectivity towards cyanide anion through photo electron transfer (PET) mechanism. The binding strength and sensitivity of the chemo sensor L3 towards cyanide are found to be 2.0 X 104, and 4.44 x 10-4 respectively. We have compared this high selectivity of the receptor towards cyanide, with our previously reported receptors L1 and L2. The detailed UV-Vis, Emission, 1H-NMR, IR spectroscopic and Molecular Electrostatic Potential (MEP) studies reveals that the homogeneous π···hole dispersion in the aromatic ring governing the selectivity of the receptor towards cyanide anion. Such a positive π···hole homogeneous dispersion is missing in the case of sensor L2, instead we have polarized π···hole dispersion towards 2nd and 4th position of di-nitrophenyl chromophoric unit in L2.
Graphical AbstractMultidentate 1,3,5-benzenetricarboxylic acid (organic linker), Zn (II) based Zn-BTC has been synthesized via electrochemical method. Quantitative and Qualitative analyses of synthesized metal–organic framework (MOF) have been done using Fourier Transform Infrared (FTIR) Spectroscopy, Energy Dispersive X- Ray Spectroscopy (EDS), and Photoluminescence (PL). Powder X-Ray Diffraction (PXRD) and Scanning Electron Microscopy (SEM) have been used for crystallographic and morphological & topographical analyses, respectively. Crystallographic studies confirm the formation of face-centered cubic (fcc) crystal structure with good crystallinity. Photo-catalytic activity of synthesized MOF has been tested using Methylene Blue (MB) dye as a test contaminant in aqueous media under sunlight irradiation. Recorded results reveal that the synthesized MOF efficiently degrade MB dye upto 96% under sunlight exposure after 270 min. Photoluminescence studies indicate that Zn-BTC could be used as an efficient material for sensing of nitroaromatic compounds (NACs): 4-Nitroaniline (4-NA), 2-Nitroaniline (2-NA), 3- Nitroaniline (3-NA), 2,4-Dinitrotoulene (2,4-DNT), 4-Nitrotoulene (4-NT) in N,N’-Dimethylformamide (DMF) by fluorescence quenching and shows maximum quenching efficiency towards 3-NA (72.80%). Notably, the variation in luminescence intensity of 3-NA@Zn-BTC shows a linear relationship over its different concentrations from 0–1000 ppb range with KSV?=?2.7?×?104 M?1 and R2?=?0.9924 with limit of detection 0.889 ppb (6.43 µM) (LOD). The possible ways of luminescence quenching are successfully explained by the combination of Photoinduced Electron Transfer (PET) and Resonance Energy Transfer (RET) mechanisms. Additionally, the Density Functional Theory (DFT) calculations have been employed to support the experimental results. Zn-BTC fully demonstrates the power of a multi component MOF, which provides a feasible pathway for the design of novel material towards fast responding luminescence sensing and photocatalytic degradation of pollutants.
Graphical AbstractMultifunctional Cu (II)-based Metal Organic Framework (MOF) [Cu3(BTC)2] has been synthesized by a facile electrochemical method. Crystallographic and morphological characterizations of synthesized MOF have been done using Powder X-ray Diffractometer and Scanning Electron Microscope (SEM), respectively, whereas Fourier Transform Infrared Spectroscopy (FT-IR), Energy Dispersive X-ray Spectroscopy (EDS), UV–Vis Absorption Spectroscopy and Energy Resolved Luminescence Spectroscopic studies have been used for the detailed qualitative, quantitative as well as optical analyses. Sharp PXRD peaks indicate the formation of highly crystalline MOF with face centered cubic (fcc) structure. Flakes (average length?=?0.71 µm and width?=?0.10 µm) and rods (average aspect ratio?=?((0.1:8.3) µm) like morphologies have been observed in SEM micrographs. The presence of C, O and Cu has been confirmed by EDS analysis. Photocatalytic activity potential of the synthesized MOF has been tested using methylene blue dye (MB) as a test contaminant in aqueous media under sunlight irradiation. Selective and sensitive fluorescent sensing of different Nitroaromatic compounds (NACs) like 4-Nitroaniline (4-NA), 2-Nitroaniline (2-NA), 3-Nitroaniline (3-NA), 4-Nitrotoulene (4-NT), 2,4-Dinitrotoulene (2,4-DNT), 1,3-Dinitrobenzene (1,3-DNB), 2,6- Dinitrotoulene (2,6-DNT) has been done by exploring the photoluminescent behaviour of chemically stable Cu3(BTC)2. Synthesized MOF is extremely sensitive towards 4-NA, which is having PL quenching efficiency of 82.61% with highest quenching rate till reported. Indeed, a large quenching coefficient KSV?=?34.02?×?10–7 M?1 and correlation coefficient R2?=?0.9962 in KSV plot have been elucidated with limit of detection (LOD)?=?0.7544 ppb. The possible ways of luminescence quenching are successfully explained by the combination of Photoinduced Electron Transfer (PET) and Resonance Energy Transfer (RET) mechanisms. Additionally, the Density Functional Theory (DFT) calculations have been employed to support the experimental results. Cu3(BTC)2 fully demonstrates the power of a multi component MOF, which provides a feasible pathway for the design of novel material towards fast responding luminescence sensing and photocatalytic degradation of pollutants.
Graphical AbstractA triplet diphenylcarbene, bis[3-bromo-5-(trifluoromethyl)[1,1'-biphenyl]-4-yl]methylidene (B3B), with exceptional stability was discovered by chemists from Japan's Mie University. To investigate its different quantum chemical features, a theoretical analysis was predicated on Density Functional Theory (DFT) and Time Dependent-DFT (TD-DFT) based technique. According to the findings, the singlet–triplet energy gap (ES-T), as well as HOMO–LUMO energy bandgap (EH-L), was found to be diminished when nucleophilicity (N) rose. We looked at the geometrical dimensions, molecular orbitals (MOs), electronic spectra, electrostatic potential, molecular surfaces, reactivity characteristics, and thermodynamics features of the title carbene (B3B). Its electronic spectra in different solvents were calculated using TD-DFT and Polarizable Continuum Model (PCM) framework. The estimated absorption maxima of B3B were seen between 327 and 340 nm, relying on the solvents, and were attributed to the S0?→?S1 transition. Estimated fluorescence spectral peaks were found around 389 and 407 nm with the S1 and S0 transitions being identified. Its fluorescence/absorption intensities revealed a blue shift change when the solvent polarity was increased. The least exciting state has been discovered to be the π?→?π* charge-transfer (CT) phase. According to the Natural Bonding Orbital (NBO) exploration, ICT offers a significant role in chemical system destabilization. Furthermore, several hybrid features were used to determine the NLO (nonlinear optical) features (polarizability, first-order hyperpolarizability, and dipole moment). The calculated values suggest that B3B is a promising candidate for further research into nonlinear optical properties.
Graphical AbstractA series of amino acid-based Schiff bases have been synthesized using a facile condensation between benzil (a diketone) and amino acid in the presence of a base. The formation of Schiff base compounds has been ensured by elemental analysis, FT-IR, 1H-NMR, 13C-NMR and UV–Vis. spectra. Density Functional Theory (DFT) calculations have been explored in order to get intuition into the molecular structure and chemical reactivity of the compounds. The DFT, optimized structure of the compounds, has been used to attain the molecular docking studies with DNA structure to find the favorable mode of interaction. In silico ADME/Tox profile of the compounds has been predicted using pkCSM web tools, exhibiting suitable values of absorption, distribution, and metabolism. These obtained parameters are connected to bioavailability. In addition, toxicity, skin sensitization and cardiotoxicity (hERG) analysis have been performed for evaluating the drug-like character of the prepared Schiff bases. The findings obtained from this study may find applications in the field focusing on the production of efficient and harmless pharmacological drugs.
Graphical abstractThe bioreductive enzymes typically upregulated in hypoxic tumor cells can be targeted for developing diagnostic and drug delivery applications. In this study, a new fluorescent probe 4?(6?nitro?1,3?dioxo?1H?benzo[de]isoquinolin?2(3H)?yl)benzaldehyde (NIB) based on a nitronaphthalimide skeleton that could respond to nitroreductase (NTR) overexpressed in hypoxic tumors is designed and its application in imaging tumor hypoxia is demonstrated. The docking studies revealed favourable interactions of NIB with the binding pocket of NTR-Escherichia coli. NIB, which is synthesized through a simple and single step imidation of 4?nitro?1,8?naphthalic anhydride displayed excellent reducible capacity under hypoxic conditions as evidenced from cyclic voltammetry investigations. The fluorescence measurements confirmed the formation of identical products (NIB-red) during chemical as well as NTR?aided enzymatic reduction in the presence of NADH. The potential fluorescence imaging of hypoxia based on NTR-mediated reduction of NIB is confirmed using in-vitro cell culture experiments using human breast cancer (MCF?7) cells, which displayed a significant change in the fluorescence colour and intensity at low NIB concentration within a short incubation period in hypoxic conditions.
Graphical abstractRapid and onsite detection of nitroaromatic explosive 2,4,6-trinitrotoluene (TNT) is very crucial for the safety and security of human life as well as for the environment. In this present work, we demonstrate the feasibility for employing Folic Acid (FA) as a fluorescent as well as a colorimetric probe for the detection of TNT. This probe was synthesized by a simple one-step process. The developed probe shows an emission maximum at 490 nm upon excitation at 420 nm. On adding TNT, the fluorescence of the FA probe is quenched. Also, it shows a good selectivity towards TNT over other similar organic compounds such as 4-nitrophenol (4-NP), 2,4-dinitrophenol (2,4-DNP) and picric acid (PA). The limit of detection (LoD) of TNT was found to be 1.9398 µM. Colorimetric detection was conducted and paper strip assay was developed for the practical applications.
Graphical AbstractA novel nitrogen doped and surface functionalized fluorescent CDs (T1) was synthesized by one-step and green hydrothermal method, which exhibits a satisfactory fluorescence quantum yield and a series of admirable features such as good aqueous solubility, narrow particle size distribution, resistance to photobleaching as well as excitation-dependent behavior. Benefitting from above merits, T1 can be employed to serve as an outstanding sensing platform for sensitive and accurate detection of ClO– by remarkable fluorescence “on–off” process with rapid and anti-interference. More notably, the good biocompatibility and photostability can ensure enormous bioimaging potential and successful application of T1 in monitoring of exogenous ClO– in MG-63 cells. Meanwhile, T1 can also be regarded as a filter paper sensor providing a convenient and efficient analyzing technology for monitoring of free residual chlorine in practical environmental samples. All these results demonstrate that there exists promising possibility for practical applications of T1 in bioimaging systems and environmental monitoring.
Graphical abstractFluorescent carbon dots (CDs) have acquired growing interest from different areas over decades. Their fascinating property of tunable fluorescence by changing the excitation wavelength has attracted researchers worldwide. Understanding the mechanisms behind fluorescence is of great importance, as they help with the synthesis and applications, significantly when narrowed down to applications with color-tunable mechanisms. But, due to a lack of practical and theoretical information, the fluorescence mechanisms of CDs remain unknown, preventing the production of CDs with desired optical qualities. This review focuses on the PL mechanisms of carbon dots. The quantum confinement effect determined the carbon core, the surface and edge states determined by various surface defects and the connected functional/chemical groups on the surface/edges, the molecular state solely determined the fluorophores in the interior or surface of the CDs, and the Crosslink Enhanced Emission Effect are the currently confirmed PL mechanisms.
Graphic AbstractFluorescence correlation spectroscopy (FCS) has been widely used to investigate molecular diffusion behavior in various samples. The use of the maximum entropy method (MEM) for FCS data analysis provides a unique means to determine multiple distinct diffusion coefficients without a priori assumption of their number. Comparison of the MEM-based FCS method (MEM-FCS) with another method will reveal its utility and advantage as an analytical tool to investigate diffusion dynamics. Herein, we measured diffusion of fluorescent probes doped into nanostructured thin films using MEM-FCS, and validated the results with single molecule tracking (SMT) data. The efficacy of the MEM code employed was first demonstrated by analyzing simulated FCS data for systems incorporating one and two diffusion modes with broadly distributed diffusion coefficients. The MEM analysis accurately afforded the number of distinct diffusion modes and their mean diffusion coefficients. These results contrasted with those obtained by fitting the simulated data to conventional two-component and anomalous diffusion models, which yielded inaccurate estimates of the diffusion coefficients. Subsequently, the MEM analysis was applied to FCS data acquired from hydrophilic dye molecules incorporated into microphase-separated polystyrene-block-poly(ethylene oxide) (PS-b-PEO) thin films characterized under a water-saturated N2 atmosphere. The MEM analysis revealed distinct fast and slow diffusion components attributable to molecules diffusing on the film surface and inside the film, respectively. SMT studies of the same materials yielded trajectories for mobile molecules that appear to follow the curved PEO microdomains. Diffusion coefficients obtained from the SMT data were consistent with those obtained for the slow diffusion component detected by MEM-FCS. These results highlight the utility of MEM-FCS and SMT for gaining complementary information on molecular diffusion processes in heterogeneous material systems.
Graphical AbstractNonionic surfactant vesicles (Niosomes) were prepared using polyoxyethylene alkyl ether (Brij 58).The impact of variation of the Brij: cholesterol molar ratio on the niosomal structure was studied. Fluorescence studies performed with the membrane probe 1,6-Diphenyl-1,3,5-triene (DPH) gave important insight on the bilayer integrity of the niosomes in response to environmental perturbations. The aim of the work being assessment of the efficacy of the niosomes as “drug release vehicles”, release studies were performed with a xanthene dye Carboxyfluorescein (CF). Further, the vesicles were used as nanoreactors for the synthesis of gold nanoparticles (GNPs) as it is often useful to house nanoparticles in biological /biomimicking environments. Stable, spherical GNPs of diameter 6–10 nm were formed in these vesicles. As the vesicular bilayer mimics the cell membrane, the present work is relevant to the use of the GNPs for diagnostic and therapeutic purpose. It has also been established that fluorescence resonance energy transfer (FRET) effectively occurs between DPH and CF in the niosomes. The FRET studies provide important insight on the location of dyes within the vesicles thus indicating the prospective applications of this fluorescence technique for tracking the location of probes in biomimicking systems which maybe extrapolated to in vivo biological systems in future.
Graphical AbstractWe have demonstrated a unique approach to alter the aqueous pool size of an AOT/n-heptane/water reverse micellar system. A positively charged dye Rhodamine B (RhB) and negatively charged Rose Bengal (RB) were incorporated in the reverse micellar pool to investigate the effect of electrostatic interactions and stacking effects among the dye molecules on the AOT/n-heptane/water interface. Dynamic light scattering revealed increase in reverse micellar pool size in presence of positively charged dye aggregates at the oil–water interface. However, less expansion was observed in presence of negatively charged dye aggregates (RB). This confirms the role of electrostatic interaction in modulating the hydrodynamic radius. A head-to-tail type of stacking of RhB molecules at the interface favors this expansion. The differences in stacking of the two dyes inside the reverse micelles and their torsional mobility indicated the role of the reverse micellar interface and H-bonding ability of the microenvironment on dye aggregation. Conductivity measurements demonstrated a significant drop in percolation temperature of the reverse micellar system in presence of dye aggregates. This confirms the effect of dye aggregation and electrostatic interaction on such expansion. This strategy can be exploited for solubilizing greater amounts and a wider variety of drug molecules in microemulsions.
Graphical abstractMicrocystin-LR (MC-LR) is widely distributed in natural lakes and could strongly inhibit protein phosphatase activity; it is also a potent liver tumor promoter. Over the last two decades, tremendous efforts have been devoted to enhance the detection of MC-LR in water samples. However, the traditional method is complex and costly, and achieving the fast, sensitive, and accurate determination of MC-LR in the cells and natural lakes by using fluorescence signal changes is fairly difficult. Our work explores novel fluorescent probes that are capable of concurrently analyzing and detecting MC-LR in the cells and water. In this study, we introduce, for the first time, 5-AF and 6-AF as small-molecule fluorescent probes suitable for MC-LR detection in the cells and water samples based on fluorescence signal changes. We titrated 5-AF and 6-AF with MC-LR in pure water, scanned the fluorescence of the sample, and then obtained the equation the fluorescence intensity versus MC-LR concentration curve. MC-LR in lake water samples was crudely purified, and then 5-AF was added to measure its fluorescence peak. The fluorescence intensity of 5-AF is significantly enhanced with increasing MC-LR concentration. This enhancement trend is stable and could be mathematically modeled. We also comprehensively analyzed the mechanism and recognition principle of the probe response to MC-LR in natural lake water. Moreover, we believe that 5-AF may be capable of detecting exogenous MC-LR in cells. The results of this study reveal that these unique fluorescent probes may be applied to construct near-infrared fluorescent probes that could detect MC-LR levels in vivo.
Graphical Abstract