A simple, efficient and green approach to the synthesis of 1H-pyrazolo[1,2-b]phthalazine-5,10-diones has been developed via one-pot three-component reaction of aromatic aldehyde, malononitrile and phthalhydrazide catalyzed by zinc–proline complex (Zn[L-proline]2) using H2O: PEG400?=?6: 4 as solvent. Atom economy, good to excellent yield, operational simplicity and easy workup are important features of this method.
Graphical abstractIn this work, a separation and purification process of U(VI), Zr(IV) and I2 from various fission products in nitric acid solution by 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C4mim][NTf2]) and dibutyl-3-(3-methylimidazolium)propylphosphoramide bis(trifluoromethanesulfonyl)imide-task specific ionic liquid (phosphoramide-TSIL) was investigated. The phosphoramide-TSIL was found to reduce ligand loss compared to dibutyl propylphosphoramidate by total organic carbon testing (TOC). The stripping of U(VI), Zr(IV) and I2 could be achieved by guanidine carbonate solution, oxalic acid solution and sodium hydroxide solution, respectively. The phosphoramide-TSIL/[C4mim][NTf2] showed good irradiation stability and recyclability. Phosphoramide-TSIL has the potential to be applied for separation and purification in the actual radioactive environment.
Graphical abstractIn this research, a new heterogeneous catalyst is fabricated through covalent modification of iron-based metal–organic framework with ionic liquid. In more detail, using 2-aminoterephthalic acid and iron (III) chloride hexahydrate, amino-functionalized metal–organic framework has been synthesized and then reacted with 2,4,6-trichloro-1,3,5-triazine and 1,4-diazabicyclo[2.2.2]octane successively to furnish ionic liquid on metal–organic framework. The as-prepared catalyst was characterized by FTIR, TGA, BET, SEM/EDS, XRD and elemental mapping analysis and then employed for catalyzing synthesis of pyrano [2,3‐d]pyrimidines (with yields of 80–100%) from one-pot three-component reaction of aldehydes, barbituric acid and malononitrile in aqueous media. The catalytic test inferred high catalytic activity of the catalyst, superior to that of IL and metal–organic framework. Furthermore, the catalyst could be recovered and recycled for five reaction runs with preserving its morphology.
Graphic abstractEucalyptus cellulose is usually pre-treated by oxidation with 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO), NaBr and NaClO at pH 10.5 and 25 °C before the mechanical process required to obtain cellulose nanofibers (CNFs). In this study, different aspects to improve the effectiveness and sustainability of the TEMPO-mediated oxidation are analyzed. The optimization was carried out at different reaction times by modifying both the concentration of the NaClO and the amount of the catalysts (TEMPO and NaBr). Results show that the carboxyl groups increased up to 1.1 mmol/g with 5 mmol NaClO/g after 50 min, and that the catalyst concentration can be reduced to 0.025 mmol TEMPO/g and 0.5 mmol NaBr/g to minimize costs while maintaining the high fibrillation degree of the CNFs. The kinetic of the reaction can be considered as zero-order with respect to NaClO, and as first order with respect to cellulose. As a result of this work, the catalyst doses are reduced up to 75% compared to the most widely used catalyst doses (0.1 mmol/g TEMPO and 1 mmol/g NaBr), obtaining highly fibrillated CNFs with a lower environmental impact. This reduction of catalyst doses will reduce the costs and facilitate the implementation of CNF production at industrial scale.
Graphical abstractHigh pollution, low-productivity, formation of by-products, and costly recovery of the vitamin are the challenges in common vitamin K3 synthesis methods on the industrial scale. These have encouraged us to design and characterize novel magnetic dendrimer nanoparticles based on silica-coated iron oxide (SCIO-(l5/l8)-G2.0) for nano-encapsulation of Pd, Mn, and Co to highly efficiently selectively synthesize vitamin K3. The CHN, BET, ICP, AAS, TEM, FESEM, TGA, DLS, EDS and XPS techniques were employed to intensively identify the obtained dendritic catalysts. Furthermore, the chemical stability of dendritic catalysts and influence of four various experimental factors were assessed by long-term study and response surface methodology analysis, respectively. The characterization results confirmed that all dendritic catalysts have a quasi-spherical morphology with mean size 20–30 nm, which could provide abundant active sites, high specific surface area and also increase the contact efficiency between the active sites and reactants. These results illustrated that the catalytic efficiency (TOF) depend strongly on the chemical structures as well as Lewis sites and natures (SCIO-l8-G2.0-Pd(II)?>?SCIO-l8-G2.0-Co(II)?>?SCIO-l8-G2.0-Mn(II)?>?SCIO-l5-G2.0-Pd(II)).
Graphical abstractN-Methylpyrrolidine catalyzed, concise and attractive synthesis of a new class of 3-hydroxy-3,5/6-di-aryl-1H-imidazo[1,2-a]imidazol-2(3H)-ones was attained with impressive yields, in the presence of EtOH as a solvent, by means of a convenient and elegant condensation reaction between different aryl glyoxal monohydrates and guanidine hydrochloride under reflux conditions. Some specific merits of the current procedure, including encompasses low operating cost, availability of the starting substrates, reasonable reaction times, high reaction yield, operational simplicity, cleaner reaction profile, no harmful by-products, and the isolated product is in pure form. Structures of all the freshly synthesized products have been deduced by their FT-IR, 1H-NMR, 13C-NMR, Mass spectrometry data and microanalysis.
Graphical abstractLife-threatening diseases, especially those caused by pathogens and harmful ultraviolet radiation (UV-R), have triggered increasing demands for comfortable, antimicrobial, and UV-R protective clothing with a long service life. However, developing such textiles with exceptional wash durability is still challenging. Herein, we demonstrate how to fabricate wash durable multifunctional cotton textiles by growing in situ ZnO-TiO2 hybrid nanocrystals (NCs) on the surface of cellulosic fabrics. The ZnO-TiO2 hybrid NCs presented high functional efficiency, owing to their high charge transfer/separation. Ultrafine fiber surface pores, utilized as nucleating sites, endowed the uniform growth of NCs and their physical locking. The resulting fabrics presented excellent UV protection factors up to 54, displayed bactericidal efficiency of 100% against Staphylococcus aureus and Escherichia coli, and optimum self-cleaning efficacy. Moreover, the functionalized textiles exhibited robust washing durability, maintaining antibacterial and anti-UV-R efficiency even after 30 extensive washing cycles.
Graphical abstractA green, highly efficient, and eco-friendly protocol for Knoevenagel–Michael addition reaction is reported in Chickpea leaf exudates (CLE) as a naturally sourced biosurfactant. The reactions between dimedone/4-hydroxycoumarins and a variety of aryl aldehydes were carried out in presence of CLE to afford diketodiols/biscoumarins. The synthetic pathway complies with several key requirements of green chemistry principles such as the employment of natural feedstock as green reaction media, ambient temperature, atom economy along with natural biosurfactant type Bronsted acids, and recyclable and biodegradable catalyst which led to a 28-fold increase in molar efficiency versus industrial standard protocols. Its dynamic phase is confirmed by the optical microscopy technique and critical micelle concentration measurement. The notable advantages of the present protocol were simple work-up procedure, high yield within short reaction time, easy separation of products, avoiding tedious column chromatography thus making the protocol environmentally friendly, sustainable, and economical.
Graphical abstractMembrane applications for the separation of surfactant-stabilized emulsions are often constrained by a deficiency in permeability and anti-fouling properties. Herein, special wetted cotton fabric with a protective layer (P-MH@CF) for durable anti-fouling performance was synthesized by a two-step method, which was related to interfacial ion migration technology and unilateral spraying treatment. Permeability of water and separation performance of P-MH@CF membrane were investigated systematically. Emulsions stabilized by anionic, cationic, or non-ionic surfactant were successfully separated with high efficiency. In the process of separation, the oil droplets surrounded by surfactants were difficult to demulsify and gathered physically on the membrane surface to form a “cream layer”. The stearic acid acted as a protective layer, like a quilt, protecting the membrane from contamination. The membrane retained robust reusability for separation even after the “cream layer” had been washed off, which was promising for the remediation of oily wastewater containing surfactants.
Graphical abstractIncreasing electromagnetic pollution calls for electromagnetic interference (EMI) shielding materials, especially sustainable, lightweight, and environmentally stable, biomass-based materials. MXene-coated wood (M/wood) is prepared by simply spraying MXene sheets on the wood surface. Varying this spray coating manipulates the shielding performance and its application to different wood species. The M/wood exhibits high electrical conductivity (sheet resistance is only 0.65 Ω/sq) with an excellent EMI shielding effectiveness of 31.1 dB at 8.2?~?12.4 GHz and is also fire retardant. Furthermore, waterborne acrylic resin (WA) is coated on M/wood to enhance environmental stability. The WA coating improves EMI shielding performance stability after water-soaking and drying testing and prevents the peeling of MXene from wood. These satisfactory properties of WA-M/wood and the facile manufacturing approach promote the feasibility of wood-based EMI shielding materials.
Graphical abstractA variety of liquid energy exists in papermaking engineering and has not yet been developed and utilized. In addition, for the papermaking industry, the presence of slime can seriously affect the quality of the finished paper and can lead to paper breaking. The current slime control strategies cannot completely solve the problem and also have some low toxicity. In this study, a method of self-powered sterilization of cellulose fibers by using triboelectric pulsed direct current is reported. A liquid–solid triboelectric nanogenerator (L–S TENG) was used to convert the liquid energy of nanocellulose suspension into electrical energy and convert this electrical energy into pulsed direct current for self-powered sterilization of cellulose fiber. A hydrophobic coating material is used as solid triboelectric material and electrode for sterilization. Driven by L–S TENG, the electrodes exhibited an excellent sterilization rate against four microorganisms including Escherichia coli, Aspergillus niger, Candida albicans, and Klebsiella pneumoniae, which from slime in the papermaking industry. This study could provide a basic research theory for liquid energy harvesting in the papermaking industry, and also provide a new strategy for pulp sterilization.
Graphical abstractThis study prepared a waterproof cellulose nanofibril (CNF) sheet via the deposition of an alkyl ketene dimer (AKD) on the sheet’s controlled porous structure. The porosity of the CNF sheet was controlled by drying under different conditions, which included hot-press drying (HD) and solvent-exchange drying (SD), and the effect on the hydrophobization and water-related barrier performance of the sheet were investigated. When the SD sheet was immersed in an AKD wax solution, the sheet exhibited super-hydrophobicity and a lower water vapor transmission rate, compared with the HD sheet. This indicated that the porous structure of the SD sheet enabled AKD to be adsorbed on both the surface and the inner surface and it filled in the pores of the sheet, thereby giving rise to excellent waterproofing properties. The performance of a hydrophobized SD sheet as a water barrier material was comparable to a linear low-density polyethylene film. This study confirms the possibility for AKD wax to be immersed in a porous CNF sheet and used as a potential barrier material in hydrogel packaging.
Graphical abstractAn efficient and convenient procedure for the synthesis of novel 6-hydroxy-14-aryl-8H-dibenzo[a,i]xanthene-8,13(14H)-dione derivatives has been developed by one-pot, three-component condensation reaction between 2-hydroxynaphthalene-1,4-dione, aromatic aldehydes and 2,3-naphthalenediol in glacial acetic acid under reflux conditions. This domino reaction implies Knoevenagel condensation, Michael addition, intramolecular cyclization and dehydration. The reaction avoids tedious workup procedure due to the direct precipitation of products from the reaction medium. The notable features of this domino transformation are operational simplicity, clean reaction, easy handling, easy purification process and high yields of the products.
Graphical abstractIonic cellulose nanocrystals (CNCs) are interesting surface-active particles for encapsulating a lipophilic liquid in water. A CNC is modified chemically to a negative charge (an S-CNC) by surface treatment with sulfuric acid. Despite the amphiphilic nature of S-CNCs, it is difficult to determine the degree of substitution for emulsification of lipophilic liquids, especially when the surface energy is low and polarity is high. Here, we control the substitution of S-CNCs by desulfation of S-CNCs (dS-CNCs) using a low-concentration hydrochloric acid solution. Decreased surface charge of S-CNCs was expected, and the lipophilic affinity of dS-CNCs increased compared with those of S-CNCs. Six oils with differing surface tensions were selected for determination of the effect of charged CNCs on emulsification. The stability of the emulsion was evaluated by emulsion fraction, emulsion particle size, and surface tension of emulsified solutions from dS-CNCs and oils.
Graphical abstractThe AHA coupling of amines, haloalkane and alkynes under UV visible light was achieved with a higher yield in the presence of Au/Fe2O3. The catalyst was prepared by two methods using different gold content and then characterized by XRD, UV–vis, BET, TEM, ICP-OES and TPR spectroscopies. A comparative study of the ordinary and photocatalytic conditions, showed that the UV visible light could activate the gold nanoparticles and lead to the formation of CH2Cl? and Cl? radicals through CH2Cl2 fragmentation. The propargylamine was afforded at low temperature and a short time using 2% Au/Fe2O3. The catalyst was stable for five cycles with good photoactivity.
Graphical abstractMultifunctional materials for water purification have attracted significant attention due to the increased water pollution problems. However, fabricating the low-cost, effective, and recyclable separation material for wastewater containing various hazardous substances is still a challenge. Herein, we developed an Ag/TiO2@PDMS coated cotton fabric with self-cleaning ability, high flux, superior visible-light photocatalytic ability, and recyclability via the “powder?+?glue” strategy. The composites are superhydrophobic (water contact angle 157°) and show high separation efficiency. After 20 times of repeated use, the separation efficiency remains 16,322 Lm?2 h?1, and methylene blue (MB) 's degradation rate remains almost unchanged. The high oil purification, catalytic property, excellent stability in harsh conditions, and recyclability enable the material as a satisfactory candidate for water purification.
Graphical abstractSub-2-µm sea-urchin-like TiO2 microspheres were prepared through the one-step solvothermal method. Results of scanning electron microscopy (SEM) and transmission electron microscopy (TEM) show that there are a lot of nanorods coming out from the center of the TiO2 microsphere, making it look like a sea urchin. The morphology and structure of these microspheres are very suitable for chromatographic packing. During the separation of inorganic anions on this new stationary phase, the retention mechanism is electrostatic interaction, and the pH of the mobile phase plays an important role in retention behaviors. With this new stationary phase for separation of organic anions and nucleobases, Lewis acid–base interaction is more outstanding, which can cause peak broadening and tail for larger conjugated structure compounds. The separation of aromatic hydrocarbons on this new stationary phase demonstrates that Lewis acid–base interaction has a favorable influence on the separation of electron-rich aromatic hydrocarbons under normal phase chromatographic conditions.
Graphical abstractThis study introduces an effective route to fabricate chitosan (CS)-based film. The films were prepared through cross-linking reaction between CS and hydroxyethyl cellulose (HEC) using epichlorohydrin (ECH) as the cross-linker and simultaneously in-situ loading with CuO nanoparticles. FT-IR and loading efficiency results indicated the occurrence of inter- and intra-molecular cross-linking reaction between CS and HEC. XRD and EDS analyses showed that the CuO nanoparticles were evenly deposited onto CS film matrixes. SEM characterization showed that the films were of compact, dense and uniform cross morphologies, as well as obvious voids. The films also exhibited desired swelling ratio and water vapor permeability. The enhanced tensile strength was obtained with a maximum value of 77.02?±?3.26 MPa, while the stretch-ability slightly decreased. The thermal stability of the films decreased after cross-linking with HEC. The antibacterial ability of the films was generally improved with the increase of HEC and ECH contents.
Graphical abstractPreparation and properties of epichlorohydrin-cross-linked chitosan/hydroxyethyl cellulose based CuO nanocomposite films
An eco-friendly method for diversity-oriented synthesis of substituted dihydropyrano[2,3-c]pyrazole and benzylpyrazolyl coumarin derivatives has been achieved via one-pot and multicomponent reaction in the presence of PdO/Al-SBA-15 as an efficient and recyclable catalyst in H2O/EtOH under reflux conditions. The significant merits of this method are wide scope, high yields of the desired products, short reaction times and simple workup procedure. In addition, this nanocatalyst was simply recovered and reused five times without significant loss in catalytic activity and also performance.
Graphical abstractIn this, an efficient flame retardant composite has been prepared using biowaste derived phosphorous groups decorated graphene supported nanomaterial. The eggshell was utilized as a source of calcium carbonate, which was converted to monocalcium phosphate (CP) by phosphoric acid treatment. As-prepared monocalcium phosphate was functionalized with graphene to prepare graphene functionalized monocalcium phosphate (GCP). The GCP-coated fabric didn't ignite during the flame test and sustained more than 600 s on continuous exposure to flame without changing its initial length and shape. Whereas, graphene oxide (GO), and CP coated cotton fabric burnt out very easily within a short time. The efficient flame retardant property of as synthesized GCP coated cotton fabric was confirmed with a high limiting oxygen index (34.1) and char length of 2.5 cm was generated from the VFT test. The synthesized GCP coated cotton fabric also confirmed efficient flame retardant properties. This facile method enables an easy process for mass production of cost-effective, bio-waste derived nanomaterial for a significantly highly efficient candidate for different applications in sustainable chemistry, including flame-retardant applications.
Graphical abstract