AlGaAs/InGaAs PHEMT栅电流参数退化模型研究

为定量研究在PHEMT栅电流退化过程中, 不同失效机理对应的参数退化时间常数及退化比例, 本文基于退化过程中物理化学反应中反应量浓度与反应速率的关系, 建立了PHEMT栅电流参数退化模型. 利用在线实验的方法获得PHEMT电学参数的退化规律, 分析参数随时间的退化规律, 得到不同时间段内影响栅电流退化的失效机理, 并基于栅电流参数退化模型, 得到了不同的失效机理对应的参数退化时间常数及退化比例. 关键词： PHEMT 栅电流 肖特基接触 退化模型     

基于反应动力学的GaN LED参数退化模型的研究

加速实验中, 参数退化模型描述了参数的退化规律, 参数退化规律对应于器件退化机理, 而退化机理又对应于内部的物理化学反应. 因此, 本文基于反应动力学中物理化学反应的温度效应速率模型及反应量浓度随时间的变化规律, 研究并建立了GaN LED参数退化模型. 本模型尝试从物理机理上解释参数退化过程中的退化规律, 包括单调上升或单调下降退化规律、先上升后下降或先下降后上升等非单调退化规律, 解决了实验后拟合方法不能建立非单调退化模型的问题. 然后对GaN LED进行加速实验, 确定模型参数. 同时对GaN LED的退化规律进行分解, 并且量化了GaN LED两种退化规律的退化比例及时间常数. 关键词： 参数退化模型 反应动力学 加速实验 GaN LED     

Ultrasonic degradation of 2:4:6 trichlorophenol in presence of TiO2 catalyst.

The degradation of trichlorophenol has been studied at different intensities of irradiation using ultrasonic horn by changing the power input to the system. Effect of presence of catalyst TiO2 and concentration of catalyst on the degradation rates has also been investigated. The rates of degradation are found to be higher at higher intensities in the absence of catalyst but reverse trend is observed in the presence of catalyst. Adsorption and desorption characteristics of trichlorophenol on TiO2 catalyst have been examined. The catalyst enhances the rates of degradation but it also adsorbs some amount of TCP during the degradation process protecting it from ultrasonic degradation. Thus it is essential to consider the adsorption and desorption kinetics to get proper estimates of the degradation rates when the rates of degradation of TCP are calculated by analyzing the residual concentration of the compound in the liquid. The degradation of the pollutant seems to take place in the liquid only and that too only after desorption of the same from the solid particles. Solid particles seem to play a physical role in the overall degradation scheme, providing additional surface cavitation.     

联用多种荧光光谱研究高铁酸钾对荧蒽的降解

应用多种荧光光谱追踪了高铁酸钾对荧蒽的降解过程, 包括发射, 同步, 三维(EEM), 时间扫描及光度定量所提供丰富的关于整个降解反应的信息, 探讨了高铁酸钾对荧蒽分子的降解特性及其随时间变化规律; 分别对该降解过程中的不同时段(20, 40, 70 s)的时间扫描荧光曲线进行拟合,并由此推测了高铁酸钾降解荧蒽的动力学特征。结果显示, 相同的反应时段, 各荧光光谱反映的高铁酸钾对荧蒽分子的降解率非常接近: t=10 s约55%; t=25 s约81%; t=40 s约91%。各时段的降解过程中均未出现新的荧光特性; t≤20 s, 为该降解反应的决定性阶段, 此阶段的降解过程最为接近线性关系; t>20 s, 降解过程偏离线性关系越来越远。整个降解过程可以近似地用一级反应动力学规律描述。     

Kinetics of ultrasonic degradation of phenol in the presence of TiO2 particles

The degradation of phenol by ultrasonic irradiation in the presence of TiO2 was investigated in complete darkness. The effects of amount of TiO2 and the combination of TiO2 addition with gas (air or oxygen) supply on the degradation kinetics of phenol and the formation of the reaction products were examined. The degradation rate of phenol increased with the amount of TiO2. As the dissolved oxygen concentration increased by supplying oxygen, the degradation rate of phenol also increased. A kinetic model for the disappearance of phenol was proposed. The model takes into account the OH radical formation by direct water degradation, indirect degradation by oxygen atom and indirect degradation by TiO2 catalysis. The calculated results explained well the fact that a higher amount of TiO2 and dissolved oxygen concentration gave faster disappearance rate.     

Sonolytic degradation of endocrine disrupting chemical 4-cumylphenol in water

The sonolytic degradation of endocrine disrupting compound 4-cumylphenol (4-CyP) in aqueous solution was investigated. The influence of operating parameters for sonication process such as 4-CyP initial concentration, frequency, power, pH, temperature and saturating gas was examined. The extent of degradation was inversely proportional to the initial substrate concentration. The rate of 4-CyP degradation was frequency dependent. The degradation rate increased proportionally with increasing ultrasonic power from 20 to 100 W and temperature in the range of 20-50°C. The most favorable degradation pH was acidic media. Destruction in the presence of saturating gas follows the order: argon>air>nitrogen. The 4-CyP degradation was inhibited in the presence of nitrogen gas owing to the free radical scavenging effect in vapor phase within the bubbles of cavitation. The ultrasonic degradation of 4-CyP was clearly promoted in the presence of bromide anions and the promoting effect on degradation increased with increasing bromide concentration. At low 4-CyP concentration (0.05 mg L(-1)), bicarbonate ion drastically enhanced the rate of 4-CyP degradation. Experiments conducted using pure and natural water demonstrated that the sonolytic treatment was more efficient in the natural water compared to pure water.     

Study on mechanism of chitosan degradation with hydrodynamic cavitation

Hydrodynamic cavitation is an effective method for chitosan degradation, of which the mechanism directly determines the molecular weight distribution of degradation products. In this study, based on the Monte Carlo simulation and experimental results, the mechanism of chitosan degradation with hydrodynamic cavitation and molecular weight distribution of products were analyzed. The results showed that the algorithm established in the simulation could effectively analyze degradation mechanism and the factors that influenced degradation mechanism and molecular weight distribution of products. The degradation with hydrodynamic cavitation was caused by chemical and mechanical effects, of which the former dominated the degradation process. The outlet and inlet angles and throat length of the cavitator had major and minor influences on the degradation pattern, respectively. The chemical effect led to random cuts resulting in wide distribution of the products, while the mechanical effect led to central cuts resulting in narrow distribution of the products. With more central cuts, the slide-shaped molecular weight distribution curve of degradation products was gradually transferred into a bell-shaped curve. These results provide instructions for researches on the molecular weight distribution of chitosan products degraded with hydrodynamic cavitation.     

分子量对PAMS热降解等温活化能的影响

聚α-甲基苯乙烯(PAMS)是制备激光惯性约束聚变(ICF)用靶丸的重要芯轴材料之一。采用快速热解气相色谱-质谱法(Py-GC-MS)和热重分析技术(TG/DTG)分析了不同分子量PAMS的热降解产物和热降解温度,并通过Arrhenius方程计算了不同分子量PAMS的等温热降解活化能。结果表明：分子量对PAMS热降解产物的影响可忽略不计,其热降解产物均为α甲基苯乙烯单体,且产率均接近100%;热降解温度随PAMS分子量的增加而降低,其热降解温度介于240~450 ℃之间;在相同降解率下,随分子量的减小,PAMS的热降解活化能增加,且PAMS的热降解活化能随着热降解率的增加而增加。     

Effect of various sono-oxidation parameters on the removal of aqueous 2,4-dinitrophenol

The influences of ultrasonic output intensity, solution pH, H₂O₂ concentration and the addition of Fenton reagent on the degradation of 2,4-dinitrophenol (DNP) under ultrasonic irradiation were investigated. It was observed that the degradation of DNP fitted pseudo-first-order dynamics under our experimental conditions. Increasing the ultrasonic output intensity increased the degradation efficiency of DNP and low pH favored the ultrasonic degradation of DNP. The addition of H₂O₂ enhanced the ultrasonic degradation efficiency of DNP. The further addition of Cu²⁺, however, hindered the degradation of DNP. In contrast, sono-oxidation treatment in combination with FeSO₄/H₂O₂ showed a synergistic effect for DNP degradation.     

Sonochemistry of organic compounds in homogeneous aqueous oxidising systems

The influence of ultrasound on the degradation of trichloroethylene, o-chlorophenol and 1,3-dichloro-2-propanol in some Fenton type aqueous systems was investigated. Kinetic analysis of the results revealed that the ultrasonic waves do not really enhance the reactivity of the system, but rather add their own degradation mechanism to the chemical degradation. This effect is comparable to the well known sonochemical switching effect. As a consequence, the degradation rate of the combined systems is the sum of the pure sonochemical degradation rate and the silent chemical degradation rate. The only exception to this rule is the degradation of o-chlorophenol in the presence of hydrogen peroxide, in the absence of catalysts. Care had to be taken in order to avoid artifacts that may arise, e.g., when neglecting temperature effects.     

Kinetics of the ultrasonic degradation of poly (alkyl methacrylates)

The influence of the alkyl group substituents on the ultrasonic degradation of poly (alkyl methacrylate)s, namely poly (methyl methacrylate) (PMMA), poly (ethyl methacrylate) (PEMA) and poly (butyl methacrylate) (PBMA) was studied. The rate coefficient increased with an increase in the number of carbon atoms in the alkyl group: thus the order of degradation was PBMA>PEMA>PMMA. This was attributed to the scission of the main chain, which increases with the length of the side chain. The ultrasonic degradation of PBMA was investigated in various solvents, at different temperatures and at different ultrasound intensities. The degradation rate coefficients increased logarithmically with the decrease in vapor pressure and increased linearly with an increase in viscosity of the solvent and ultrasound intensity. The effect of three different initiators, benzoyl peroxide (BPO), dicumyl peroxide (DCP) and azo-bisisobutyronitrile (AIBN) on the ultrasonic degradation of PBMA was also studied. The degradation of the polymer decreased in the presence of the initiator. A continuous distribution model was developed for the radical mechanism involved in degradation and was used to determine the degradation rate coefficients of PBMA in presence of initiator. The model indicated that the degradation rate coefficient of the interaction of the PBMA radical with the initiator is independent of the dissociation constant of the initiator.     

纳米二氧化钛介孔微球光催化降解水中BPA的机理

描述了两种不同三维二氧化钛介孔球对水悬浮液中BPA的光降解效果,结果发现紫外线照射下两种三维二氧化钛介孔球的光催化效果要优于P25型二氧化钛,且微球孔隙越小,对BPA的降解效果越好;运用HPLC-MS以及HPLC-MS-MS联用技术对降解中间产物进行定性分析,并且对BPA光催化降解机理进行分析。发现在光催化降解过程中形成5种主要的中间产物并对它们的演变过程进行了讨论。根据分析测定得到的降解中间产物,提出了一个关于两种二氧化钛介孔球光催化剂对BPA降解的详细路径。     

Influence of Bovine Bone Content on In Vitro Degradation of Poly-L-lactic Acid and Bovine Bone Composite Materials

In vitro degradation experiments of poly-L-lactic acid (PLLA) and bovine bone (BB) composites were carried out in a phosphate-buffered solution (PBS) at 37°C with a pH of 7.4. The influence of BB content on pH value of PBS, water uptake, molecular weights, molecular weight distributions, weight losses, mechanical strengths, and morphologies of PLLA/BB was investigated with degradation times. The results indicated that the presence of the BB modified the degradation of the PLLA matrix. The degradation rate of PLLA in the PLLA/BB composite was slower than the degradation rate of the sole PLLA material. Furthermore, the degradation rate of the composites became slower with the increasing content of BB in PLLA/BB composites.     

Degradation analysis of thin film photovoltaic modules

Five thin film photovoltaic modules were deployed outdoors under open circuit conditions after a thorough indoor evaluation. Two technology types were investigated: amorphous silicon (a-Si:H) and copper indium gallium diselenide (CIGS). Two 14 W a-Si:H modules, labelled Si-1 and Si-2, were investigated. Both exhibited degradation, initially due to the well-known light-induced degradation described by Staebler and Wronski [Applied Physics Letters 31 (4) (1977) 292], and thereafter due to other degradation modes such as cell degradation. The various degradation modes contributing to the degradation of the a-Si:H modules will be discussed. The initial maximum power output (P_MAX) of Si-1 was 9.92 W, with the initial light-induced degradation for Si-1 ∼30% and a total degradation of ∼42%. For Si-2 the initial P_MAX was 7.93 W, with initial light-induced degradation of ∼10% and a total degradation of ∼17%. Three CIGS modules were investigated: two 20 W modules labelled CIGS-1 and CIGS-2, and a 40 W module labelled CIGS-3. CIGS-2 exhibited stable performance while CIGS-1 and CIGS-3 exhibited degradation. CIGS is known to be stable over long periods of time, and thus the possible reasons for the degradation of the two modules are discussed.     

Comparison of ultrasonic degradation rates constants of methylene blue at 22.8 kHz, 127 kHz, and 490 kHz

Techniques such as solvent extraction, incineration, chemical dehalogenation, and biodegradation have been investigated for the degradation of hazardous organic compounds. We found ultrasound to be an attractive technology for the degradation of hazardous organic compounds in water. However, the effects of ultrasonic frequency on degradation rate constants were not investigated quantitatively. In this study, the degradation process of a model for hazardous organic compound methylene blue was investigated using ultrasonic irradiation. The study focused on the effects of ultrasonic frequency and ultrasonic power on the degradation rate constant. The apparent degradation rate constants were estimated based on time dependence of methylene blue concentration assuming pseudo-first-order kinetics for the decomposition. A linear relationship between the apparent degradation rate constant and ultrasonic power was identified. In addition, the apparent degradation rate constants at frequencies of 127 and 490 kHz were much larger than those at 22.8 kHz. A relationship between the apparent degradation rate constant and the sonochemical efficiency value (SE value) was also found. Based on these results, a simple model for estimating the apparent degradation rate constant of methylene blue based on the ultrasonic power and the SE value is proposed in this study.     

激光辐照受载金属软化效应的数值模拟

用有限元法模拟了连续激光辐照受载金属所产生的软化效应。建立了计算软化效应的二维有限元数值模型。得到了软化效应与预载荷、激光功率密度的依赖关系。结果表明,激光产生的软化效应会大大降低金属材料的屈服阈值,且材料的软化程度与预载荷及激光功率密度有关。     

包膜肥料用改性聚乙烯醇膜材料降解性的研究

采用自然环境暴露和田间埋土试验,利用质量变化、红外光谱和电镜扫描技术研究自行研发的包膜肥料用改性聚乙烯醇膜材料的降解性。自然暴露和田间埋土试验结果表明,研发的膜材料均具有一定的降解性,且降解率随培养时间增加呈现上升的趋势。两种试验条件下,降解率最高的膜材料可达到35%以上,其中柠檬酸作为改性剂研发的膜材料降解性远远强于环氧树脂作为改性剂研发的膜材料。柠檬酸/聚乙烯醇/硅藻土复合膜材料因硅藻土的添加使得降解性能进一步增强,强于未改性的膜材料。而环氧树脂/聚乙烯醇膜材料虽然有一定的降解性,但是相较于对照差别不显著,添加硅藻土之后也不能明显增加其降解率。红外光谱表征结果显示,膜降解后一些主要基团CO,CC,CH的数量较对照有所减少,透射率增强,这说明膜发生了一定的降解。电镜扫描结果显示膜降解后表面变粗糙、凹凸不平,也说明该膜材料具有一定的降解性。红外光谱和电镜扫描的结果与质量变化试验的结果相一致,能够更客观地表征膜材料的降解性。研发的聚乙烯醇改性后的膜材料既能有效控制养分释放,又能在自然环境中自行降解,又不对环境造成危害,适合作包膜肥料用的膜材料。     

Calculation of the rate constant for the ultrasonic degradation of aqueous solutions of polyvinyl alcohol by viscometry

Ultrasonic degradation of polyvinyl alcohol (PVA) was carried out in aqueous solution at 25 degrees C. In this experiment, the effect of solution concentration on the rate of degradation was investigated. Kinetics of degradation was studied by viscometry method. The calculated rate constants indicate that degradation rate of PVA solutions decreases with increasing of solution concentration (C= g lit(-1)). The calculated rate constants correlated in terms of reverse concentration and relative viscosity of PVA solutions. This behavior in the rate of degradation was interpreted in terms of viscosity and concentration of polymer solution. With increasing solution concentration, viscosity increases and it causes a reduction in the cavitation efficiency thus, the rate of degradation will be decreased.     

Investigation of the degradation mechanisms in BaMgAl10O17:Eu2+ phosphor: on the influence of thermal process on operational durability

The thermal and operational degradation in optical property of a europium-doped barium magnesium aluminate (BaMgAl₁₀O₁₇:Eu²⁺, BAM) phosphor was studied. BAM was heat-treated at 500°C under various conditions to determine the mechanism of thermal degradation. Operational degradation tests were then performed under a discharging Xe/Ne mixed gas to study the influence of thermal history on operational degradation. It was found that the atmosphere during thermal processing was the major factor affecting not only the thermal degradation, but also the operational degradation. The sample heat-treated under a reducing atmosphere showed enhanced stability during operation.     

灭多威的超声降解研究

研究了灭多威模拟废水在超声作用下的降解反应动力学、降解产物、降解途径、以及影响降解速率的因素等问题.结果表明,灭多威经超声作用35min,可被完全转换为无机物,其降解过程为假一级反应;浓度增加时,降解减慢;Fe