Proposal of a uniform fiber Bragg grating as an ultrafast all-optical integrator

It is demonstrated that a uniform fiber Bragg grating (FBG) working in the linear regime inherently behaves as an optical temporal integrator over a limited time window. Specifically, the reflected temporal waveform from a weak-coupling uniform FBG is proportional to the time integral of an (arbitrary) optical pulse launched at the component input. This integration extends over a time window fixed by the duration of the squarelike temporal impulse response of the FBG. Ultrafast all-optical integrators capable of accurate operation over nanosecond time windows can be implemented using readily feasible FBGs. The introduced concepts are demonstrated by numerical simulations.     

Ultrafast all-optical integrator based on a fiber Bragg grating: proposal and design

We demonstrate a simple technique for the implementation of an all-optical integrator based on a uniform-period fiber Bragg grating (FBG) in reflection that is designed to present a decreasing exponential impulse response. The proposed FBG integrator is readily feasible and can perform close to ideal integration of few-picosecond and subpicosecond pulses.     

Proposal and design of an in-fiber all-optical fractional integrator

We theoretically and numerically demonstrate that a single fiber Bragg grating – conveniently apodized and of uniform period – operated in reflection can perform an arbitrary-order fractional integration of an input optical waveform. Analytical expressions were found relating the fractional integration order with the apodization profile of the fiber Bragg grating. This simple device shows a good accuracy calculating the fractional time integral of the complex field of arbitrary input optical waveforms.     

Tunable Chirped Fiber Grating Based Variable Time-Delay Network for Phased-Array Antenna Beamforming

In this paper, we present a photonics continuous beamforming system for optically controlled phased-array antenna based on a tunable fiber ring laser source and a novel variable true-time delay network consisting of one single-mode fiber delay line and four tunable chirped grating delay lines. The chirp rate of each chirped grating is tuned by bending a uniform fiber Bragg grating (FBG) bonded at a slant onto the lateral surface of a simply supported beam. This kind of variable true-time delay network can provide five-channel time-delayed signals that can be fed to an antenna array to achieve continuously beam scanning. The proposed true-time-delay unit with 5-element phased array steerer is suitable for phased-array antenna beamforming at frequencies up to 12 GHz.     

Fractional optical Hilbert transform using phase shifted fiber Bragg gratings

In this paper, we demonstrate that an arbitrary order (including both integer and fractional orders) Hilbert transform (HT) of an input optical waveform can be implemented by a simple and practical phase-shifted fiber Bragg grating (PSFBG) operated in reflection mode. The PSFBG consists of two concatenated identical uniform FBGs with a proper phase shift between them. It is proved that both the phase shift of the FBGs and the apodizing profile of the refractive index modulation determine the order of the transform. The simulation results show that the device can perform arbitrary fractional Hilbert transform (FHT) with excellent accuracy for input signals with up to hundreds of GHz bandwidth using feasible FBG structures.     

岩层变形检测的光纤光栅多点传感理论与工程应用

为了监测松散地层沉降变形,提出了一种用于钻孔中植入式光纤Bragg光栅传感器(FBG)的结构和传感网络系统.基于室内实验结果,给出了用于岩层变形检测的传感光栅波长带宽为6 nm,分析了多点传感信号分辨因子,山光源带宽决定的测试系统最大实际复用能力为6个传感器.设计并实现了一个由18个光纤光栅组成的具有特色的光纤Bragg光栅波分复用/空分复用混合阵列.工程实践表明,光纤光栅传感系统采用双同路布置.可提高系统下放后光纤光栅传感器的成活率.     

Hetero-core fiber Bragg grating for simultaneous measurement of strain and bending based on cladding mode ratiometric detection

A simple but practical method using multimode-single mode fiber Bragg grating (FBG) for cladding mode based simultaneous measurement of strain and bending is proposed and investigated experimentally. Experimental results show that the intensity ratio between cladding mode and FBG resonance of hetero-core FBG show monotonous changes following with the increase of deflection, by which strain and bending discrimination can be achieved by measuring the wavelength shift of FBG resonance and ratiometrically detecting the intensity changes between cladding modes and FBG resonance.     

Highly reliable strain-tuning of an Erbium-doped fiber laser for the interrogation of multiplexed Bragg grating sensors

The authors implemented a tunable linear cavity Erbium-doped fiber (EDF) laser for the interrogation of multiplexed fiber Bragg grating sensors (BGS). A high-strength single-pulse draw-tower fiber Bragg grating (FBG) was used as the mechanically tunable element enabling the rapid wavelength sweeping of the laser center wavelength. A simple algorithm to process the noisy acquired data and identify the peak of the BGS spectra was employed. For the first time, this type of configuration was used to reliably interrogate at least three fiber Bragg grating sensors with a standard wavelength spacing between the Bragg wavelengths of 3 nm, without risk of breaking the stretched fiber, using an FBG with a simple PZT driven mount as the tuning elements.     

Compact FBG diaphragm accelerometer based on L-shaped rigid cantilever beam

A compact fiber Bragg grating(FBG) diaphragm accelerometer based on L-shaped rigid cantilever beam is proposed and experimentally demonstrated.The sensing system is based on the integration of a flat diaphragm and an L-shaped rigid cantilever beam.The FBG is pre-tensioned and the two side points are fixed,efficiently avoiding the unwanted chirp effect of grating.Dynamic vibration measurement shows that the proposed FBG diaphragm accelerometer provides a wide frequency response range(0-110 Hz) and an extremely high sensitivity(106.5 pm/g),indentifying it as a good candidate for embedding structural health monitoring and seismic wave measurement.     

基于封装光纤Bragg光栅传感器的混凝土应变监测试验研究

研究了光纤Bragg光栅封装工艺,提出并实现了两种封装光纤Bragg光栅传感器:工字型钢管封装光纤Bragg光栅应变传感器及钢管封装光纤Bragg温度传感器。研究了传感器的埋设工艺,采用金属丝固定法、钢管抽出法两种方法进行了埋设。将它们埋入到钢筋混凝土梁中,实现对混凝土的拉、压应变及温度的测量。结果显示,在试验梁弹性阶段,可以较为准确的监测混凝土应变。     

Fiber to the Classrooms: Internet over Fiber Optical CATV System

This study proposed and demonstrated a directly modulated NTSC AM-VSB 77-channel plus Internet access system using a Fabry-Perot (FP) laser diode, an optical isolator, fiber Bragg grating (FBG), wavelength-division-multiplexing (WDM), channel conversion and two-way communication techniques over an existing multimode fiber (MMF) on the author’s campus. Performances of carrier-to-noise ratio (CNR) of >43dB composite second order (CSO) of >53dB and composite triple beat (CTB) of >53dB were obtained over a 2-km MMF transmission. The proposed two-way communication system is simple and suitable for fiber to the classrooms application.     

Application of high-precision temperature-controlled FBG filter and light source self-calibration technique in the BOTDR sensor system

A high-precision temperature-controlled narrow band-stop fiber Bragg grating(FBG) filter and light source self-calibration technique are proposed for application in the Brillouin optical time domain reflectometer (BOTDR) sensor system.With the proposed application,the BOTDR sensor system maintains good long-term stability and temperature precision through the reduction of the center wavelength drift in the FBG filters and corresponding decrease in the changes in light intensity.The experiment result shows that temperature precision of 1℃and temperature stability of 0.7℃can be achieved in a temperature sensor over a range of 8 km.     

Enhancement of measurement accuracy in fiber Bragg grating sensors by using digital signal processing

Wavelength detection accuracy in fiber Bragg grating (FBG) sensors can be increased by use of digital signal processing after photo-detection. Finite impulse response and infinite impulse response algorithms were implemented and used to improve the wavelength detection accuracy of peak detection and time-zero-crossing techniques. The wavelength detection resolution can be improved by an order of magnitude compared with that obtained directly from an optical spectrum analyzer/tunable laser.     

Vibration mode analysis of a silica horn-fiber Bragg grating device

This work presents an analysis of the vibration modes of a silica horn-fiber Bragg grating device, which is used for different applications in photonics. The analysis, based on the finite elements method, shows the different acoustical regimes for the excitation of flexural and longitudinal waves in the fiber. Using one single device, experimental results support the analysis by showing the change of the FBG reflectivity, an effect that happens when flexural waves are present, and also by showing the modulation of the FBG, an effect that is caused by longitudinal waves.     

Correction of systematic errors in the fabrication of fiber Bragg gratings

We suggest a novel method for significant improvement of fiber Bragg grating (FBG) spectral characteristics based on compensation of repeatable errors during the grating writing process. The method is based on an open loop scheme in which a test grating is written first and then a corrected design is obtained and implemented by writing another (compensated) grating. The results are presented for a FBG dispersion compensator.     

Multiwavelength Linear-Cavity Fiber Laser Source Using a Sagnac Interferemetric Filter and a Strain-Induced Chirped Fiber Grating

A novel multiwavelength linear-cavity fiber laser source using a strain-induced chirped fiber Bragg grating, a Sagnac interferemetric filter, and Erbium-Ytterbium codoped fibers is proposed and demonstrated for the first time. The Sagnac interferemetric filter, which acts as a full-reflecting mirror, consists of a polarization-maintaining directional coupler and two pieces of polarization-maintaining fibers. The strain-induced chirped FBG, which acts as a partial-reflecting mirror, is achieved by bending a uniform FBG bonded at a slant onto the lateral surface of a simply supported beam. By tuning the strain-induced chirped FBG, desirable lasing wavelength and number can be easily achieved.     

新型高准确度光纤光栅压力传感系统

提出一种使用光纤双布喇格光栅测定压力的测量方法.在外界压力作用下,传感光纤布喇格光栅反射波长的漂移,被转变成在交变力策动下,发生弯曲的等强度悬臂梁调制扫描光栅反射光脉冲间隔的变化.实验结果表明,光纤布喇格光栅反射波长漂移的测量范围为0～3 nm,波长测量的不确定度为1 pm;压力传感器的量程为0～6 MPa时,压力的测量不确定度为0.005 Mpa.     

基于光纤布拉格光栅传感器的光纤光栅智能夹层试验研究

传感元件与复合材料的一体化是智能结构研究的最终目标之一。设计一种具有自诊断功能的标准化、模块化光纤智能夹层系统,正是实现这种一体化最有潜力的技术途径。采用聚酰亚胺薄膜制作了基于光纤布拉格光栅（FBG）传感器的光纤光栅智能夹层,对智能夹层中光纤布拉格光栅传感器的应变、温度特性进行了标定试验,并建立了基于光纤布拉格光栅传感器光纤光栅智能夹层的应变、温度测量模型。试验表明,智能夹层内布拉格光栅波长偏移与应变、温度之间具有良好的线性关系。不过在温度测量时,必须考虑被埋人结构的热膨胀效应。利用光纤光栅智能夹层内光纤布拉格光栅传感器网络和先进信息处理技术,可以建立结构损伤主动、在线和实时监测系统。     

A cheap and practical FBG temperature sensor utilizing a long-period grating in a photonic crystal fiber

A whole temperature sensor in one package utilizing a fiber Bragg grating (FBG) made in a conventional single-mode fiber and which uses a long-period grating (LPG) made in a photonic crystal fiber is proposed and experimentally demonstrated. The function of the interrogation is that the wavelength change of the FBG with environmental temperature is transferred to the intensity of the output via the LPG. Utilizing the temperature-insensitivity of the LPG in the PCF, the interrogation is stable and enables a cheap and practical temperature measurement system with a wide dynamic range.     

Multiple fiber Bragg grating interrogation based on a spectrum-limited Fourier domain mode-locking fiber laser

A novel fiber Bragg grating (FBG) sensing system based on a spectrum-limited Fourier domain mode-locking (SL-FDML) fiber laser is proposed. Multiple FBGs cascaded in a long fiber are utilized as both the sensors in the system and the wavelength-selected components in the SL-FDML fiber laser. Both wavelength-division multiplexing and spatial-division multiplexing techniques are demonstrated for interrogation of multiple FBGs by mapping the wavelength measurement to the time measurement and by adjusting the driving frequency of the SL-FDML fiber laser. The proposed FBG sensing system, employing techniques of the wavelength- and spatial-domain interrogation of multiple FBGs, can be used in remote and quasi-distributed multipoint sensing.