Efficient one-pot biosynthesis of silver nanoparticles using Entada spiralis stem powder extraction

Research on Chemical Intermediates - Biosynthesis of noble metal nanoparticles is a vast developing area of research. In the present study, silver nanoparticles (Ag-NPs) are synthesized from...     

Green biosynthesis of silver nanoparticles using Torreya nucifera and their antibacterial activity

Silver nanoparticles were biosynthesized with the aid of a novel and eco-friendly biological material Torreya nucifera. Temperature and extract concentration were found to influence the size and shape of the biosynthesized silver nanoparticles. Morphological images of biosynthesized nanomaterials revealed that the particles are in spherical shape and size ranging between 10 and 125 nm. Crystalline nature of nanoparticles in face centered cubic (fcc) structure was ensured by diffraction pattern peaks corresponding to (1 1 1), (2 0 0), (2 2 0) and (3 1 1) planes. Characterization of the biosynthesized nanoparticles was performed by the X-ray diffraction and Fourier Transform Infrared spectroscopy analyses. FT-IR analysis indicates that nanoparticles are bound to proteins through amine groups of the aminoacid. Furthermore the biosynthesized nanoparticles were found to be highly effective against Salmonella typhimurium bacterium, which validates its potential applications as antibacterial agents in drinking water treatment and in food packagings.     

Green biosynthesis of silver nanoparticles and nanomolar detection of p-nitrophenol

Green biosynthesis of nanoparticles and their applications in sensor field is of great interest to the researchers. We report herein a simple green approach for the synthesis of silver nanoparticles (Ag-NPs) using Acacia nilotica Willd twig bark and its application for the detection of 4-nitro phenol (4-NP). The synthesized Ag-NPs were characterized by Transmission electron microscopy, X-ray diffraction and elemental analysis. The size of synthesized Ag-NPs was in the range of 10–50 nm. The Ag-NPs modified electrode shows a high sensitivity and selectivity towards the sensing of 4-NP. The fabricated modified electrode shows a low detection limit of 15 nM on the wider linear response range from 100 nM to 350 μM with the sensitivity of 2.58?±?0.05 μAμM^?1 cm^?2. In addition, the fabricated sensor shows good repeatability and reproducibility.

Green synthesis of silver nanoparticles using Macrotyloma uniflorum

Green synthesis of noble metal nanoparticles is a vast developing area of research. In this paper we report the green synthesis of silver nanoparticles using aqueous seed extract of Macrotyloma uniflorum. The effect of experimental parameters such as amount of extract, temperature and pH on the formation of silver nanoparticles was studied. The as prepared samples are characterized using XRD, TEM, UV-Visible and FTIR techniques. The formation of silver nanoparticles is evidenced by the appearance of signatory brown colour of the solution and UV-vis spectra. The XRD analysis shows that the silver nanoparticles are of face centered cubic structure. Well-dispersed silver nanoparticles with anisotropic morphology having size ～12 nm are seen in TEM images. FTIR spectrum indicates the presence of different functional groups in capping the nanoparticles. The possible mechanism leading to the formation of silver nanoparticles is suggested.     

Green synthesis and characterization of monodispersed silver nanoparticles obtained using oak fruit bark extract and their antibacterial activity

Green synthesis of silver nanoparticles (Ag NPs) has been achieved using oak fruit bark extract as a reducing, capping and stabilizing agent. The biosynthesized Ag NPs were characterized using various techniques. UV–visible spectrum of prepared silver colloidal solution showed absorption maximum at 433 nm. X‐ray diffraction and transmission electron microscopy analysis revealed that Ag NPs have a face‐centred cubic structure being spherical in shape with an average particle size of 20–25 nm. The toxicity of the Ag NPs was tested on bacterial species such as Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa and Escherichia coli by comparison based on diameter of inhibition zone in disc diffusion tests and minimum inhibitory concentration and minimum bactericidal concentration of NPs dispersed in liquid cultures. The antimicrobial activity of Ag NPs was greater towards Gram‐positive bacteria (S. aureus and B. subtilis) compared to Gram‐negative bacteria as determined using standard Kirby–Bauer disc diffusion assay and serial dilution. Copyright © 2016 John Wiley & Sons, Ltd.     

Extracellular biosynthesis of silver nanoparticles using the fungus Aspergillus fumigatus

Development of reliable and eco-friendly process for synthesis of metallic nanoparticles is an important step in the filed of application of nanotechnology. One of the options to achieve this objective is to use natural processes such as use of biological systems. In this work we have investigated extracellular biosynthesis of silver nanoparticles using Aspergillus fumigatus. The synthesis process was quite fast and silver nanoparticles were formed within minutes of silver ion coming in contact with the cell filtrate. UV–visible spectrum of the aqueous medium containing silver ion showed a peak at 420 nm corresponding to the plasmon absorbance of silver nanoparticles. Transmission electron microscopy (TEM) micrograph showed formation of well-dispersed silver nanoparticles in the range of 5–25 nm. X-ray diffraction (XRD)-spectrum of the silver nanoparticles exhibited 2θ values corresponding to the silver nanocrystal. The process of reduction being extracellular and fast may lead to the development of an easy bioprocess for synthesis of silver nanoparticles.     

Extracellular biosynthesis of silver nanoparticles using the fungus Fusarium oxysporum

The development of reliable, eco-friendly processes for the synthesis of nanomaterials is an important aspect of nanotechnology today. One approach that shows immense potential is based on the biosynthesis of nanoparticles using biological micro-organisms such as bacteria. In this laboratory, we have concentrated on the use of fungi in the intracellular production of metal nanoparticles. As part of our investigation, we have observed that aqueous silver ions when exposed to the fungus Fusarium oxysporum are reduced in solution, thereby leading to the formation of an extremely stable silver hydrosol. The silver nanoparticles are in the range of 5–15 nm in dimensions and are stabilized in solution by proteins secreted by the fungus. It is believed that the reduction of the metal ions occurs by an enzymatic process, thus creating the possibility of developing a rational, fungal-based method for the synthesis of nanomaterials over a range of chemical compositions, which is currently not possible by other microbe-based methods.     

Size-fractionation of silver nanoparticles using ion-pair extraction in a counter-current chromatograph

Size separation of silver nanoparticles was investigated in counter-current chromatography (CCC) based on a unique step-gradient extraction process. Carboxylate anions were modified on silver nanoparticles to produce water-dispersible nanoparticles. The aqueous nanoparticles were readily transferred to the organic phase (toluene/hexane = 1:1, v/v) together with the phase transfer catalyst, tetraoctylammonium bromide (TOAB), owing to the ion-pair adduct formation between silver nanoparticle anions and tetraoctylammonium cations. Smaller nanoparticles were found to be more readily transferred to the organic phase compared to larger nanoparticles. Various concentrations of TOAB in the organic elution phase were used in the CCC extraction experiments. It appeared that a concentration of 0.02 mM of TOAB was adequate to achieve optimum separation and recovery for the aqueous Ag nanoparticle sample (1.5 mg) in the CCC extraction experiments. Samples of 15.8 ± 5.3 nm were separated; the distributions of four fractions collected were 13.7 ± 1.9, 14.1 ± 3.5, 19.2 ± 4.3, and 22.2 ± 4.9 nm. Compared with the stepwise extraction performed in this study, the step-gradient extractions using CCC provided much better size discrimination.     

Biosynthesis of silver nanoparticles using <Emphasis Type="Italic">Artocarpus elasticus</Emphasis> stem bark extract

Background

Green approach in synthesizing metal nanoparticles has gain new interest from the researchers as metal nanoparticles were widely applied in medical equipment and household products. The use of plants in the synthesis of nanoparticles emerges as a cost effective and eco-friendly approach. A green synthetic route for the production of stable silver nanoparticles (Ag-NPs) by using aqueous silver nitrate as metal precursor and Artocarpus elasticus stem bark extract act both as reductant and stabilizer is being reported for the first time.

Results

The resultant Ag-NPs were characterized by UV–vis spectroscopy, powder X-Ray diffraction, transmission electron microscopy (TEM), scanning electron microscopy (SEM), and Fourier-transform infra-red (FT-IR). The morphological study by TEM and SEM shows resultant Ag-NPs in spherical form with an average size of 5.81 ± 3.80, 6.95 ± 5.50, 12.39 ± 9.51, and 19.74 ± 9.70 nm at 3, 6, 24, and 48 h. Powder X-ray diffraction showed that the particles are crystalline in nature, with a face-centered cubic structure. The FT-IR spectrum shows prominent peaks appeared corresponds to different functional groups involved in synthesizing Ag-NPs.

Conclusions

Ag-NPs were synthesized using a simple and biosynthetic method by using methanolic extract of A. elasticus under room temperature, at different reaction time. The diameters of the biosynthesis Ag-NPs depended on the time of reaction. Thus, with the increase of reaction time in the room temperature the size of Ag-NPs increases. From the results obtained in this effort, one can affirm that A. elasticus can play an important role in the bioreduction and stabilization of silver ions to Ag-NPs.

Open image in new window

Graphical abstract: Figure illustrates stabilization of silver nanoparticles after formation by A. elasticus stem bark extract.

     

Mangifera indica leaf-assisted biosynthesis of well-dispersed silver nanoparticles

Natural fluorite crystals containing oxygen impurities are colored electrolytically by using a pointed cathode and a flat anode at various temperatures and voltages. F and F₂ color centers are produced in colored fluorite crystals. O²⁻–V_a⁺, O²⁻–V_a⁺ aggregate, Yb²⁺, Ce³⁺ and Sm²⁺ absorption bands are observed in absorption spectra of uncolored fluorite crystals. O²⁻–V_a⁺, O²⁻–V_a⁺ aggregate, Yb²⁺, Ce³⁺, Sm²⁺, F, M (F₂) absorption bands and group of four absorption bands are observed simultaneously in absorption spectra of colored fluorite crystals. Current−time curve for electrolytic coloration of natural fluorite crystal and its relationship with electrolytic coloration process are given. Production and conversion of color centers are explained.     

Optimum extraction process of polyphenols from Bridelia grandis stem bark using experimental design

Euphorbiaceae barks are known to contain an appreciable amount of polyphenolic compounds responsible for several biological activities. Preliminary extraction from Bridelia grandis stem bark afforded high content of polyphenols, determined by spectrophotometric methods such as Folin–Ciocalteu (for total phenols, TP) and n‐butanol‐HCl (for condensed tannins, CT). A preliminary Plackett–Burman screening design was used to identify the key factors that influence the TP and CT extraction. Between all the variables known to influence the extraction from vegetable matrixes, six were selected; maceration was chosen as traditional extraction methodology. To investigate the effect of solvents and extraction method, methanol, acetone 70% (v/v in water), centrifugation and ultrasound were chosen. A full factorial design 2³ was applied to optimize the extraction procedure. The responses were obtained analyzing the extracts for their TP and CT contents determined by the above‐mentioned spectrophotometric methods. The results confirm that, within the explored domain, the optimum solvent is methanol and the optimum method is one‐cycle centrifugation. Finally, it was also compared with the effect of maceration on the considered responses. It has never given results better than centrifugation, whereas in the case of CT it represents an advantage to employ a three‐cycle centrifugation instead of one.     

Green synthesis of silver nanoparticles using seed extract of Jatropha curcas

An eco-friendly process for rapid synthesis of silver nanoparticles has been reported using aqueous seed extract of Jatropha curcas. Formation of stable silver nanoparticles at different concentration of AgNO₃ gives mostly spherical particles with diameter ranging from 15 to 50 nm. The resulting silver particles are characterized using HRTEM, XRD and UV–vis spectroscopic techniques. XRD study shows that the particles are crystalline in nature with face centered cubic geometry.     

Green synthesis of silver nanoparticles by using eugenol and evaluation of antimicrobial potential

The importance of green synthesis was revealed with advantages such as: eliminating the use of expensive chemicals; consume less energy; and generate environmentally benign products. With this aim, silver nanoparticles (AgNPs) were synthesized by using isolated eugenol from clove extract. Its antimicrobial potential was determined on three different microorganisms. Clove was extracted and eugenol was isolated from this extract. Green synthesis was performed and an anti‐microbial study was performed. All extraction and isolation analyses were performed by high‐performance liquid chromatography (HPLC); identification and confirmation were achieved using liquid chromatography–mass spectrometry (LC–MS); and scanning electron microscopy was used for characterization. Both HPLC and LC–MS analyses showed that eugenol obtained purely synthesized AgNPs and 20‐25‐nm‐sized and homogeneous shaped particles seen in images. The antimicrobial effects of AgNPs at eight concentrations were determinated against Staphylococcus aureus, Escherichia coli and Candida albicans, and maximum inhibition zone diameters were found as 2.6 cm, 2.4 cm and 1.5 cm, respectively. The results of the antimicrobial study showed that eugenol as a biological material brought higher antimicrobial effect to AgNPs in comparison to the other materials found in the literature.     

Green synthesis of silver nanoparticles using olive leaf extract and its antibacterial activity

The silver nanoparticles (AgNPs) synthesized using hot water olive leaf extracts (OLE) as reducing and stabilizing agent are reported and evaluated for antibacterial activity against drug resistant bacterial isolates. The effect of extract concentration, contact time, pH and temperature on the reaction rate and the shape of the Ag nanoparticles are investigated. The data revealed that the rate of formation of the nanosilver increased significantly in the basic medium with increasing temperature. The nature of AgNPs synthesized was analyzed by UV–vis spectroscopy, X-ray diffraction, scanning electron microscopy and thermal gravimetric analysis (TGA). The silver nanoparticles were with an average size of 20–25 nm and mostly spherical. The antibacterial potential of synthesized AgNPs was compared with that of aqueous OLE by well diffusion method. The AgNPs at 0.03–0.07 mg/ml concentration significantly inhibited bacterial growth against multi drug resistant Staphylococcus aureus (S. aureus), Pseudomonas aeruginosa (P. aeruginosa) and Escherichia coli (E. coli). This study revealed that the aqueous olive leaf extract has no effect at the concentrations used for preparation of the Ag nanoparticles. Thus AgNPs showed broad spectrum antibacterial activity at lower concentration and may be a good alternative therapeutic approach in future.     

Green synthesis of silver nanoparticles for ammonia sensing

Silver nanoparticles synthesized by a reagent less method involving only UV radiation have been used in colorimetric assay for the detection of ammonia in solution. The silver nanoparticles were synthesized by the exposure of a silver nitrate solution to a low-power UV source in the presence of poly(methacrylic acid) (PMA), which acted both as reducing and capping agent. The synthesis of the silver nanoparticles was studied by monitoring the changes in position and amplitude of the localized plasmon resonance (LSPR) band using UV-vis spectroscopy. The morphology of the particles was studied using transmission electron microscopy which confirmed the formation of spherical particles with an average particle size around 8 nm. Interestingly, the silver nanoparticles solution was found to display a strong color shift from purple to yellow upon mixing with increasing concentration of ammonia ranging from 5 to 100 ppm. Hence, the nanoparticles prepared with this method could be used as colorimetric assay for sensing applications of ammonia in water.     

Green synthesis and characterization of polymer-stabilized silver nanoparticles

Silver nanoparticles (Ag-NPs) were synthesized using a facile green chemistry synthetic route. The reaction occurred at ambient temperature with four reducing agents introduced to obtain nanoscale Ag-NPs. The variables of the green synthetic route, such as acidity, concentration of starting materials, and molar ratio of reactants were optimized. Dispersing agents were employed to prevent Ag-NPs from aggregating. Advanced instrumentation techniques, such as X-ray powder diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), ultraviolet–visible spectroscopy (UV–vis), and phase analysis light scattering technique (ZetaPALS) were applied to characterize the morphology, particle size distribution, elemental composition, and electrokinetic behavior of the Ag-NPs. UV–vis spectra detected the characteristic plasmon at approximately 395–410 nm; and XRD results were indicative of face-centered cubic phase structure of Ag. These particles were found to be monodispersed and highly crystalline, displaying near-spherical appearance, with average particle size of 10.2 nm using citrate or 13.7 nm using ascorbic acid as reductants from particle size analysis by ZetaPALS, respectively. The rapid electrokinetic behavior of the Ag was evaluated using zetapotential (from −40 to −42 mV), which was highly dependant on nanoparticle acidity and particle size. The current research opens a new avenue for the green fabrication of nanomaterials (including variables optimization and aggregation prevention), and functionalization in the field of nanocatalysis, disinfection, and electronics.     

Green synthesis of colloidal silver nanoparticles using natural rubber latex extracted from Hevea brasiliensis

Colloidal silver nanoparticles were synthesized by an easy green method using thermal treatment of aqueous solutions of silver nitrate and natural rubber latex (NRL) extracted from Hevea brasiliensis. The UV–Vis spectra detected the characteristic surface plasmonic absorption band around 435 nm. Both NRL and AgNO₃ contents in the reaction medium have influence in the Ag nanoparticles formation. Lower AgNO₃ concentration led to decreased particle size. The silver nanoparticles presented diameters ranging from 2 nm to 100 nm and had spherical shape. The selected area electron diffraction (SAED) patterns indicated that the silver nanoparticles have face centered cubic (fcc) crystalline structure. FTIR spectra suggest that reduction of the silver ions are facilitated by their interaction with the amine groups from ammonia, which is used for conservation of the NRL, whereas the stability of the particles results from cis-isoprene binding onto the surface of nanoparticles. Therefore natural rubber latex extracted from H. brasiliensis can be employed in the preparation of stable aqueous dispersions of silver nanoparticles acting as a dispersing and/or capping agent. Moreover, this work provides a new method for the synthesis of silver nanoparticles that is simple, easy to perform, pollutant free and inexpensive.     

Green synthesis and antibacterial effects of aqueous colloidal solutions of silver nanoparticles using clove eugenol

Silver nanoparticles were synthesized using clove extract (CE). Scanning transmission electron microscopy (STEM) revealed the morphology of the metallic Ag nanoparticles obtained via the clove extract synthesis (Ag NPs‐CE), which had a uniform distribution and average sizes varying from 10 nm to 100 nm. Fourier transform infra‐red (FTIR) spectroscopy showed that clove eugenol acts as a capping and reducing agent being adsorbed on the surface of Ag NPs‐CE, enabling their reduction from Ag⁺ and preventing their agglomeration. Formation of the Ag⁰ structure is also confirmed in the FTIR spectrum by the presence in the Ag NPs‐CE sample of the –C=O and –C=C vibrations at wavenumbers 1600 and 2915 cm^‐1, respectively. Antibacterial and antifungal tests using three strains of bacteria and one fungi strain showed that the Ag NPs‐CE performed better compared to pure clove extract (CE) sample.     

Green synthesis of antibacterial chitosan films loaded with silver nanoparticles

An eco-friendly chemical reduction method was successfully used for the preparation of chitosan (CTS) composite films loaded with silver nanoparticles (AgNPs) by self assembly method using poly(ethylene glycol) as both reducing and stabilizing agent. UV-Vis spectra of the prepared chitosan loaded silver nanoparticles (CTSLAg) films reveal that full reduction of silver ions to silver nanoparticles takes place at 90 °C. The effect of reaction conditions on the silver nanoparticles formation was investigated using UV-Vis spectrophotometer. The morphology of the films was tested by scanning electron microscopy (SEM). The DSC curves showed that the CTSLAg film had a favorable compatibility and heat stability. AgNPs were confirmed by XRD and UV-Vis spectroscopy. The TEM findings revealed that the silver nanoparticles synthesized were spherical in shape with uniform dispersal, and by increasing CTS:PEG ratio larger silver nanoparticles could be obtained. The results of antibacterial study reveal that the prepared nanocomposite films exhibited potential inhibition.     

Extracellular biosynthesis of functionalized silver nanoparticles by strains of Cladosporium cladosporioides fungus

In the present investigation, we report the extracellular biosynthesis of silver nanoparticles (AgNP) employing the fungus Cladosporium cladosporioides. The extracellular solution of C. cladosporioides was used for the reduction of AgNO(3) solution to AgNP. The present study includes time dependent formation of AgNP employing UV-vis spectrophotometer, size and morphology by employing TEM (transmission electron microscopy), structure from powder X-ray diffraction (XRD) technique and understanding of protein-AgNP interaction from Fourier transform infrared (FT-IR) spectroscopy. The AgNP were 10-100nm in dimensions as measured by TEM images.