正交多载波M元循环移位键控扩频水声通信

针对水声扩频通信中频带利用率低的问题, 提出了一种M元扩频技术和循环移位键控(CSK)技术相结合的多载波调制方式, 将M元扩频后选择的扩频码同时采用CSK调制, 并调制在多个正交的载波上, 显著提高了频带利用率. 在水声多途信道下, 采用相同的通信速率和带宽, m序列、Kasami小集合序列和Gold序列为扩频码时, 比较了系统的误码性能. 仿真结果和实验结果均表明, m序列为扩频码时性能最优, Gold序列性能最差. 由于m序列数量有限, 为了进一步提高通信速率, 并使其他序列的性能接近m序列性能, 提出了一种复合序列抑制载波间干扰的算法, 该算法能够很好抑制多途干扰, 使复合序列性能接近m序列的性能. 关键词： M元扩频')" href="#">M元扩频 循环移位键控 正交多载波 载波间干扰     

高速水声通信系统仿真研究

水声信道是较复杂的数据通信环境。本文设计了3种高速水声通信的系统结构,并通过系统的、全面的仿真比较了他们的性能。建立了包括时变衰落、多途和加性干扰的水声信道模型。3种方案都采用相位相干的QPSK调制技术,接收端采用空时联合的自适应均衡(内置DPLL)接收;前向纠错编码译码器分别采用3种方案:卷积码,串行级联码(卷积码+RS码),并行级联卷积码(Turbo码)。通过仿真研究了不同数目水声接收机的接收分集下的系统性能,研究了3种编码方案下的系统性能。     

多脉冲位置调制卫星光通信中时钟抖动对比特错误概率影响

多脉冲位置调制(MPPM)是基于脉冲位置调制(PPM)的改进形式,已成为卫星光通信中高效调制方式。针对存在背景辐射、大气湍流、热噪声的卫星光通信信道,研究了远场激光脉冲展宽机理和时钟抖动对系统的影响。提出基于格雷码的MPPM联合编码调制方式减小时钟抖动和码间干扰影响,应用星座图设计了基于格雷码(7,2)MPPM映射方法,在相同传输带宽下(7,2)MPPM的传输效率超过16PPM的2倍。分析泊松信道下基于格雷编码的(7,2)MPPM字符错误概率和比特错误概率(BEP)。结果表明,采用格雷编码MPPM可以有效抵御定时误差并降低系统比特错误概率。     

基于RS码及网格编码调制技术的60GHzOFDM-RoF系统

分析了60 GHz正交频分复用技术光纤无线通信系统中的子载波互拍及频率选择性衰落.提出利用里德-所罗门码级联网格编码调制技术结合符号交织来降低两者对系统性能的不良影响.采用符号交织来分散正交频分复用中子载波上的误码,然后通过高码率的里德-所罗门码级联实用的网格编码调制技术来纠正比特错误.仿真结果表明:经过符号交织后,误...     

紫外激光通信中PPM与Turbo联合编码调制研究

为提高紫外激光通信系统中的编码效率和频带利用率，提出采用PPM（pulse position modulation）调制和Turbo编码相结合的技术来提高效率。此方法不仅能提高频带的利用率，也能提高码间抗干扰能力、纠错能力和降低误码率，并对PPM调制模式下的Turbo码译码公式进行了推导，最后利用Matlab软件实现了该技术的仿真，仿真结果表明：在紫外激光通信中采用PPM和Turbo统一调制编码的技术能进一步降低系统的效率和误码率。     

基于RS码及网格编码调制技术的60 GHz OFDM-RoF系统

分析了60 GHz正交频分复用技术光纤无线通信系统中的子载波互拍及频率选择性衰落.提出利用里德-所罗门码级联网格编码调制技术结合符号交织来降低两者对系统性能的不良影响.采用符号交织来分散正交频分复用中子载波上的误码,然后通过高码率的里德-所罗门码级联实用的网格编码调制技术来纠正比特错误.仿真结果表明:经过符号交织后,误码在子载波上的分布变得较均匀,有利于纠错|2.5 Gb/s正交频分复用信号采用RS-PTCM-64QAM方案比采用未编码的16QAM调制提高了5 dB左右的接收机灵敏度.     

极化编码调制正交频分复用水声通信中的极化码构造方法

为进一步提高水声通信可靠性和频带利用率,针对极化编码调制的水声通信需求和信道特性,基于蒙特卡洛法提出动态水声信道认知优化统计目标参数、联合译码的判决反馈信道估计两点改进,建立了适用于编码调制水声信道中的极化码构造算法。为验证该算法性能,建立了极化编码调制水声通信的两步应用机制。通过仿真,比对并分析改进前后的极化码构造方法性能、对时变信道的鲁棒性,以及在不同映射规则下的联合比特交织和多级编码的极化编码调制水声通信性能,并与低密度校验(LDPC)编码调制系统进行对比。湖试结果表明,提出的极化编码调制水声通信方案有效保证了信息在浅水水声信道中的可靠传输,在信噪比约为14 dB、通信距离约1 km时,实现无误码传输,性能优于相同条件下的LDPC编码调制系统。     

非二进制低密度奇偶校验码在16QAM光传输系统中的性能

以16-相正交幅度调制(16QAM)为例,分析比较了伽罗华(GF(2 m))域上m=1,2,4时,3种低密度奇偶校验(LDPC)码在16QAM光传输系统中的性能.分析表明,无论在纠错性能还是译码效率方面,4进制LDPC码比16进制LDPC码具有更大优势.为进一步改善高阶调制光传输系统中非二进制低密度奇偶校验(NB-LDPC)码的性能,在16QAM系统下的4进制LDPC码中引入水印位符号.与传统的非二进制LDPC译码方案相比,水印位方案的平均迭代次数显著下降,即引入水印位可以极大地提高NB-LDPC码的译码效率.当误码率BER=10-5时水印位方案可以改善0.1dB的净编码增益.     

连续变量相干光通信中的联合调制编码系统(英文)

根据单束光连续变量相干光通信的编码要求,提出一种联合磁光调制和电光调制的联合调制系统;根据Stokes参量与邦加球的映射关系以及Stokes矩阵理论,分析了该系统的编码原理,构造了单光束相干光通信系统,并根据编码的需要设计了相关的磁光调制器驱动控制电路和随机数产生电路.最后利用零差检测技术测量Stokes参量;将发送码与接收码进行整形处理后,得到误码率小于3.60%的通信效果,证明了该联合调制实验方案的可行性.为连续变量密钥分配提供一种简捷的编码方法.     

基于RS编码及网格编码调制的光PPM通信纠错技术

分析了RS(Reed-Solomon)纠错码和网格编码调制（Trellis Coded Modulation,TCM）技术在光脉冲位置调制通信中的应用.在此基础上,提出了以RS码作为外码,以网格编码调制技术作为内码,用于光脉冲位置调制通信的新编码方案,能以几乎不减少通信速率的优势,提高传统RS码系统在时变带限光信道中的通信性能.模拟研究了在不同空间光信道条件下,传统RS码的符号正确传输率和误码率,并对网格编码调制的编码增益、RS码与网格编码调制级联时的编码增益进行了仿真研究,证实了本方案的有效性.     

Design of Hamming Code Checker Using Titanium-Diffused Lithium Niobate-Based Waveguide

ABSTRACT

This work presents an electro-optic effect-based design for the widely used Hamming code for checking single bit errors in the received data. The structure is based on Mach-Zehnder Interferometer, designed using Titanium-diffused Lithium Niobate-based waveguides. The proposed device has been successfully tested using the beam propagation method. For a received 7-bit code, the three simultaneously generated check bits are combined to check the error position. Critical performance parameters like extinction ratio (24.39dB), contrast ratio (25.711dB), insertion loss (0.041dB), and amplitude modulation (0.079dB) calculated for the overall device are within acceptable limits for the feasibility of the device.     

一种通用的卫星导航信号码时延估计误差评估方法

卫星导航信号的码时延估计误差是决定系统服务性能的关键因素,迫切需要对多种不同调制与复用方式的导航信号进行全面的码时延估计误差性能评估,从而为后期的系统应用提供重要的选择依据.为此,本文提出了通用的码时延估计误差评估方法.首先,概括了导航接收机的码跟踪环路模型,根据是否匹配接收以及是否相干处理,将目前的导航接收机归纳为四种类型.其次,在假设码时延估计误差非常小的条件下,分别给出了匹配接收下相干处理和非相干处理时的估计误差以及相互之间的关系;推导了非匹配接收下非相干处理时的估计误差,并讨论了与相干处理时的关系.最后,推导了码时延估计误差的齐夫-扎凯界限,解决了估计误差不满足非常小这一假设条件时的评估.本文提出的评估方法均以导航信号的功率谱密度表示,为信号设计和接收机的研制提供了重要的理论指导,同时也给具体信号的评估带来了极大便利.仿真实验中对新一代典型导航信号的码时延估计误差做了有效评估.     

A small error-correction code for protecting three-qubit quantum information

We present a quantum error correction code which protects three quantum bits (qubits) of quantum information against one erasure, i.e., a single-qubit arbitrary error at a known position. The present code has a high encoding efficiency, since only one auxiliary qubit is needed for one message qubit on average. In addition, we note that the code can also work even in a worse case that the interaction with the environment causes a leakage out of the qubit space. The code may have some applications in the storage of quantum information for small-scale quantum computing, quantum information processing, and quantum communication.     

Oscillator strengths and lifetimes calculated by the Dirac-Fock method for the levels of ions of the cesium isoelectronic sequence

A new method of data transmission in DWDM systems along existing long-distance fiber-optic communication lines is proposed. The existing method, e.g., uses 32 wavelengths in the NRZ code with an average power of 16 conventional units (16 units and 16 zeros on the average) and transmission of 32 bits/cycle. In the new method, one of 124 wavelengths with a duration of one cycle each (at any time instant, no more than 16 obligatory different wavelengths) and capacity of 4 bits with an average power of 15 conventional units and rate of 64 bits/cycle is transmitted at every instant of a 1/16 cycle. The cross modulation and double Rayleigh scattering are significantly decreased owing to uniform distribution of power over time at different wavelengths. The time redundancy (forward error correction (FEC)) is about 7% and allows one to achieve a coding enhancement of about 6 dB by detecting and removing deletions and errors simultaneously.     

A method for the construction of hierarchical generalized space shift keying (GSSK) modulation for unequal error protection

In this paper, we propose a systematic method to achieve two-level unequal error protection (UEP) with generalized space shift keying (GSSK) modulation for multiple-input multiple-output (MIMO) systems. GSSK is a modulation scheme that encodes the source information in the antenna indices. To enable the nonuniform arrangement of the spatial constellation of GSSK modulation, new techniques are needed as new features of GSSK modulation are observed. The proposed method is based on first partitioning the GSSK constellation into subsets and then choosing constellation points inside a subset. The high-priority (HP) bits select the subset and the low-priority (LP) bits select constellation points inside a subset. The proposed subset partitioning procedure developed based on a theoretical study on set partitioning in the multidimensional space guarantees optimal or near-optimal HP protection, enables simple and systematic designs for LP protection, and increases the LP capacity. The proposed systematic design approach applies to systems with any numbers of transmit antennas and can create various hierarchical GSSK schemes with different HP/LP protection capabilities.     

弹光调制傅里叶变换光谱相位校正及DSP实现

弹光调制傅里叶变换光谱仪(PEM-FTS)具有调制速度快、信息量大的特点,但采样位置偏差会导致干涉图存在相位误差,影响复原光谱的准确性。因此,必需采用一种运算速度高的相位校正方案。以300 K黑体为辐射源,通过弹光调制干涉具产生干涉数据,并在TMS320C6713DSP芯片上,采用Mertz法对弹光调制干涉图进行相位校正。首先提取出一幅完整周期的双边干涉图,经过切趾处理后,以零光程差点为中心计算小双边干涉图的相位误差,再通过插值补零得到整幅干涉图的相位误差,求出整体干涉图的频谱并进行相位修正。采用二范数定义校正后反演光谱的精度,以计算定时器周期寄存器值的方法设置DSP定时器,以统计代码的运行时间,并通过观察链接命令文件.cmd中程序与数据的分配存储情况,来对比分析Mertz法与模平方法的校正结果。实验结果表明,在DSP上实现相位校正时,Mertz法相位校正方案具有运算速度快、占用存储空间少、误差较小等特点,并且Mertz相位校正法的运算时间较模平方法快20倍,适用于对PEM-FTS干涉图进行高速准确的相位校正。     

Spread-spectrum communication using binary spatiotemporal chaotic codes

We propose a scheme to generate binary code for baseband spread-spectrum communication by using a chain of coupled chaotic maps. We compare the performances of this type of spatiotemporal chaotic code with those of a conventional code used frequently in digital communication, the Gold code, and demonstrate that our code is comparable or even superior to the Gold code in several key aspects: security, bit error rate, code generation speed, and the number of possible code sequences. As the field of communicating with chaos faces doubts in terms of performance comparison with conventional digital communication schemes, our work gives a clear message that communicating with chaos can be advantageous and it deserves further attention from the nonlinear science community.     

点式单波束多普勒测流系统的设计方法

为了加快多普勒流速计算速度和提高系统稳定性,提出基于FPGA技术的多普勒测速的设计方法,其中包括信号发射电路和信号接收电路。首先通过M码进行二相相移键控信号的调制,减少了回波误差、增加信号发射能量,有效地降低了水中超声波的能量耗散对信号提取的影响。然后对回波信号进行二相解调,并利用复自相关算法进行分析处理。最后,通过测速实验对所提方法进行验证。实验结果表明,所提方法不仅具有较低的实验误差而且具有较高的可靠性。     

Orthogonal M-ary code shift keying spread spectrum underwater acoustic communication

M-ary and code shift keying（CSK）spread spectrum is generally applied to overcoming the spreading gain versus data rate limitation in underwater acoustic（UWA）communications.In addition,the concept of orthogonal M-ary CSK is introduced to UWA communication to gain higher rates.We propose a scheme employing dual-orthogonal-channel M-ary and CSK spread spectrum UWA communication based on Gold sequences owing large code set and good self and cross correlation.The modulation and demodulation scheme of the orthogonal M-ary CSK is derived algebraically and the factors critical to its performance are discussed.Furthermore,its bit error rate（BER）curve is evaluated via simulations and compared with the dual-channel M-ary CSK.Finally,the validity of the simulations is verified in tank experiments.1096.8 bps data rate of the proposed communication scheme is realized for 10 kbits data volume with no error.Overall through deduction,numerical simulation,and experiment,it is shown that the proposed method offers significantly improved performance.     

FPGA-Implemented Fractal Decoder with Forward Error Correction in Short-Reach Optical Interconnects

Forward error correction (FEC) codes combined with high-order modulator formats, i.e., coded modulation (CM), are essential in optical communication networks to achieve highly efficient and reliable communication. The task of providing additional error control in the design of CM systems with high-performance requirements remains urgent. As an additional control of CM systems, we propose to use indivisible error detection codes based on a positional number system. In this work, we evaluated the indivisible code using the average probability method (APM) for the binary symmetric channel (BSC), which has the simplicity, versatility and reliability of the estimate, which is close to reality. The APM allows for evaluation and compares indivisible codes according to parameters of correct transmission, and detectable and undetectable errors. Indivisible codes allow for the end-to-end (E2E) control of the transmission and processing of information in digital systems and design devices with a regular structure and high speed. This study researched a fractal decoder device for additional error control, implemented in field-programmable gate array (FPGA) software with FEC for short-reach optical interconnects with multilevel pulse amplitude (PAM-M) modulated with Gray code mapping. Indivisible codes with natural redundancy require far fewer hardware costs to develop and implement encoding and decoding devices with a sufficiently high error detection efficiency. We achieved a reduction in hardware costs for a fractal decoder by using the fractal property of the indivisible code from 10% to 30% for different n while receiving the reciprocal of the golden ratio.