Self-assembly of physically crosslinked micelles of poly(2-acrylamido-2-methyl-1-propane sulphonic acid-co-isodecyl methacrylate)-copper(II) complexes

Metal complexes were prepared by the reaction of Cu(II) chloride with sodium salt of random copolymers of 2-acrylamido-2-methylpropane sulphonic acid, AMPS, and isodecyl methacrylate, i-DMA. Composition was varied in the feed to obtain copolymers and their corresponding metal chelates with different content of i-DMA hydrophobic monomer. The copolymers and their metal chelates were characterized by Fourier transformed IR spectroscopy (FTIR) and scanning electron microscopy (SEM) as well as energy-dispersive X-ray spectroscopy (EDS). The X-ray diffraction studies revealed that the polymers and their chelates were amorphous. Also, the stabilities of the copolymers and their metal chelates were investigated using thermal methods such as TGA and DSC analysis. Lower thermal stability was found for the polymer–metal complexes compared to that of the copolymers.

Fluorescence spectroscopy was used to further confirm the copolymers and their Cu(II) metal complexes self-aggregate in water. Critical micellar concentrations become lower by metal complexation. A synergistic effect in self-assembly behaviour in water solutions of Cu(II) polycomplexes is attributed to the interplay between hydrophilic–hydrophobic interactions and electrostatic forces with Cu²⁺ ions. Physical crosslinking of polymeric micelles obtained by metal complexation led to more stable micelles. Sodium salt copolymers led to secondary aggregation while ionic crosslinking provided lonely micelles distributed through the substrate as seen by SEM. These results point to a mechanism in which cation-assisted-polymer-modified water structure plays a central role in the phase separation behaviour.     

The effect of the initial ratio of components in the formation of a ternary interpolymer complex on its composition and structure

The effect of the initial ratio of components in the formation of ternary interpolymer complexes with low-molecular-mass compounds of various chemical natures on the compositions and structures of polycomplexes has been studied. Complexes based on aniline, 4,4′-dipyridyl, lysine, poly(acrylic acid), and the sodium salt of polyphosphoric acid have been examined. It has been shown that an increase in the content of poly(acrylic acid) in the pristine reaction system results in a relative gain in its content in the reaction product.     

Thermal degradation of partly complexed poly(vinylpyridines) with transition metal chloride

The thermal degradation of poly(vinylpyridines), partly complexed with transition metal chlorides containing Co(II), Ni(II), Cu(II) and Zn(II) ions, was investigated using thermogravimetry, infrared spectrometry and gc/mass spectrometry. When poly(2-vinylpyridine) and poly(4-vinylpyridine) were partly complexed with transition metal ions, thermal degradation was initiated at low temperature. The complexes were decomposed even near the threshold temperature for weight loss. Degradations were modified by the complexation, particularly for poly(2-vinylpyridine). Yields of dimers, ethylpyridine, etc., increased linearly with degree of complexation, but that of monomer decreased linearly. The increase of the yield of dimer could be explained from the concept that polymer radicals reacted with metal chlorides, then dehydrochlorinated and underwent β-scission.     

Mutual enhancement of the complexing properties of components in tertiary systems containing copper nanoparticles, poly(acrylic acid), and poly(ethylene glycol)

It is shown that nonstoichiometric interpolymer complexes composed of high-molecular-mass poly( acrylic acid) and PEG of various molecular masses are more efficient stabilizers of copper sols than each component of the complex taken separately. This conclusion is based on comparison of dimensions of copper nanoparticles in sols formed via reduction of copper(II) ions in solutions of poly (acrylic acid), PEG, and their blends and on the enhanced stability of sols protected by the interpolymer complex against aggregation and oxidation of metal particles. Much shorter PEG chains than those necessary for formation of corresponding interpolymer complexes in the absence of nanoparticles can be involved in formation of tertiary complexes including copper nanoparticles, poly(acrylic acid), and PEG. On the basis of the experimental data, it is inferred that the mutual enhancement of the complexing behavior of components occurs in tertiary complexes containing copper nanoparticles and both polymers.     

Highly loaded and thermally stable Cu-containing mesoporous silica-active catalyst for the NO + CO reaction

We report the synthesis of a highly loaded and thermally stable Cu-containing mesoporous silica, which was developed by making use of poly(acrylic acid) (Pac) assembled with surfactant (C(16)TAB), as template. On this backbone, TEOS and Cu(II) hydrolysis takes place leading to the development of the final mesostructure. Poly(acrylic acid) is used not only as a micelle structural component but also as a complexation agent for Cu(II) species resulting in high metal loading and increased thermal stability of the mesoporous network. The original uncalcined material possesses hexagonal ordering, while upon calcination it is transformed into a wormlike mesoporous network with metal loading >14 wt % Cu. An evaluation of its performance as heterogeneous catalyst in NO reduction by CO shows catalytic activity comparable with that of noble metal catalysts. Complete NO conversion, with >90% selectivity to N(2), was achieved between 190 and 200 degrees C. The material retained its structure and catalytic activity after 24-h testing at the maximum catalytic conversion of NO and CO.     

Complexation of poly(acrylic acid)s with uranyl ion

The complexation of uranyl ion (UO₂²⁺) in aqueous solution with polymers containing carboxylic acid groups was studied potentiometrically. Overall formation constants of the uranyl complexes with poly(methacrylic acid) and crosslinked poly(acrylic acid) were much larger than those with the corresponding low molecular carboxylic acids. Decrease in the viscosity of the polymer solution on adding uranyl ion indicated that poly(acrylic acid) forms intra-polymer chelates with uranyl ion. The crosslinked poly(acrylic acid) adsorbed uranyl ions at higher efficiency than transition metal ions.     

pH-effects in the complex formation of polymers I. Interaction of poly(acrylic acid) with poly(acrylamide)

The effects of polymer concentration, molecular weight of poly(acrylic acid) (PAA), addition of sodium, potassium, ammonium and copper (II) chlorides on the complex formation ability of the system PAA-poly(acrylamide) (PAAM) have been studied in aqueous solutions. The critical pH values of the complexation were determined in different conditions. The complex formation ability of PAAM is compared with other non-ionic polymers. It was shown that an increase in polymers concentration, molecular weight of PAA and ionic strength favours the complexation and shifts the critical pH values to the higher pH region. An addition of CuCl₂ to the mixture of two polymers enhances the complexation drastically due to the formation of triple complexes.     

Influence of divalent ions on composition and viscoelasticity of polyelectrolyte complexes

The addition of monovalent salts to polyelectrolyte complexes (PECs) comprising oppositely charged polyelectrolytes results in diminishing propensity for complexation, leading to complexes with higher water contents and lower moduli. However, the corresponding influence of multivalent ions on polyelectrolyte complexation has not yet been explored beyond enhanced screening effects. Here, we elucidate the significant impact of the valency of the salt cation on the composition, ion partitioning, and viscoelasticity of charge-matched PECs comprising sodium salt of poly(acrylic acid) and poly(allylamine hydrochloride). Notably, preferential partitioning of divalent cations (Ca²⁺ and Sr²⁺) into the complexes is observed, in stark contrast to the depletion of monovalent ions (Na⁺) from the complexes. Concomitantly, electrostatic bridging of polyanion chains by divalent ions is found to hinder their relaxation, manifesting as a non-monotonic evolution of the shear moduli of the complexes with increasing divalent salt concentrations. Relatedly, a failure of time-salt and time-ionic strength superposition approaches in presence of divalent ions is demonstrated, highlighting the nontrivial influence of these ions on chain relaxation behavior.     

Study on metal complexes of chelating resins bearing iminodiacetate groups

Cu(II), Co(II) and Ni(II) complexes of chelating resins (CR) bearing iminodiacetate (IDA) ligands were prepared. The CR-metal complexes were characterized by FT-IR spectroscopy, X-ray diffraction (XRD), thermal behavior (TG and DTG) under nitrogen atmosphere, and electron paramagnetic resonance (EPR). FT-IR spectra of the CR-metal complexes showed the characteristic bands of CR were still present but red-shifted after the metal complexation, and new bands assigned to Me-N bonds were observed. Thermal behavior of the metal-CR complexes supported the metal complexation, metal complexation leading to the decrease of the thermal stability of the CR, the lowest thermal stability being found when the highest amount of Cu(II) was loaded. Based on the EPR results and the thermal behavior of Cu(II)-CR complexes, the scheme for the complexation of Cu(II) on the CR was suggested.     

Tunable transition metal-ligand complexation for enhanced elucidation of flavonoid diglycosides by electrospray ionization mass spectrometry

A tunable ESI-MS/MS strategy for differentiation of flavone and flavanone diglycoside isomers based on metal complexation with auxiliary ligands is reported. The addition of a metal salt and an auxiliary ligand to a flavonoid solution results in the formation of [M(II) (flavonoid-H) auxiliary ligand](+) complexes, where M(II) is a transition metal. A series of auxiliary ligands with electron-withdrawing substituents were synthesized to tailor the relative metal binding affinities of the ligands and thus directly influence the stabilities, and consequently the dissociation pathways, of the complexes. Upon collisionally activated dissociation, the complexes yield fragmentation patterns in which the abundances of key diagnostic ions are enhanced, thus facilitating isomer differentiation.     

Thermal stability and degradation mechanisms of poly(acrylic acid) and its salts: Part 3—Magnesium and calcium salts

The magnesium and calcium salts of acrylic acid have been polymerised in aqueous solution using ammonium persulphate as initiator. Both polymers were also prepared by the neutralisation of poly(acrylic acid) with metal oxide in the same medium.

The thermal degradation behaviour of magnesium and calcium polyacrylate was studied using thermogravimetry (TG), differential thermal analysis (DTA) and thermal volatilisation analysis (TVA). Degradation products were investigated by IR spectroscopy, mass spectrometry and GC-MS techniques, the volatile product fraction having first been separated by subambient TVA.

The decompositions of these materials show some similarities to the behaviour of the alkali metal salts of poly(acrylic acid) and to that of the alkaline earth metal salts of poly(methacrylic acid), but there are also important differences. Acetone and carbon dioxide are the most important volatile products and, in addition, there are various other carbonyl containing products. More carbon dioxide, resulting from side group scission, is evolved from magnesium polyacrylate than from calcium polyacrylate, because of the lower thermal stability of magnesium carbonate.     

Interpolymer complexes of copolymers of vinyl ether of diethylene glycol with poly(acrylic acid)

 The complex formation reactions of poly(vinyl ether of diethylene glycol) as well as vinyl ether of diethylene glycol–vinyl butyl ether copolymers with poly(acrylic acid) have been studied in aqueous and alcohol solutions. The formation of interpolymer complexes which were stabilized by hydrogen bonds was shown. The effects of molecular weight of poly(acrylic acid) and the nature of the nonionic polymer on the composition and stability of interpolymer complexes were clarified. The critical pH values of complexation were determined for different systems with various molecular weights and hydrophobic–hydrophilic balances. The stability of the interpolymer complexes formed in aqueous and alcohol solutions with respect to dimethylformamide addition was evaluated. The role of hydrophobic interactions and the presence of active groups on stability of the interpolymer complexes is discussed. Received: 23 July 2001 Accepted: 27 September 2001     

Synthesis and properties of a chelating resin containing triazolethiol groups

A macroreticular poly(acrylic acid)-based resin with triazolethiol as the functional group has been synthesized. The stability of the resin in acidic media and the behaviour in sorption and desorption of various metal ions have been investigated and compared with those of the acylthiosemicarbazide resin which is an intermediate in synthesis of the triazolethiol resin. Both resins show high affinity for copper(II) silver, cadmium and mercury(II), and high selectivity for silver and mercury(II) at low pH (1–2), and even at pH 7 if EDTA is present. The triazolethiol resin sorbs metal ions faster than the acylthiosemicarbazide resin does and sorbs mercury(II) from high concentrations of acids and neutral salt solutions. This resin has been applied to the concentration of silver and mercury(II) from sea-water samples by column operation.     

Symposium on Biomedical Polymers

ABSTRACT

Glycine functions were incorporated into 2–20 mol% N,N′-methylene-bis-acrylamide (NNMBA)-crosslinked polyacrylamides by transamidation with excess sodium salt of glycine. Complexation characteristics of glycine functions in different structural environments were investigated towards Co(II), Ni(II), Cu(II) and Zn(II) ions. The observed trend in complexation was found to be: Cu(II) > Ni(II) > Co(II) > Zn(II). The polymeric ligands and metal complexes were characterized by various spectral techniques. The polymeric ligands could be recycled several times and the metal ion desorbed resins showed specificity to the desorbed metal ion than other metal ions. This originates from the development of certain ‘pockets’ left by the desorbed metal ion or the ‘memory’ of the polymeric ligands for the desorbed metal ion. This lightly crosslinked systems showed much faster rebinding kinetics. The conditions of metal ion binding and rebinding were optimized to exploit the specific and selective separation of metal ions using metal ion desorbed systems. The specificity and selectivity characteristics depend on the degree of NNMBA crosslinking.     

丙烯酸系高吸水树脂反相悬浮聚合法制备及其吸附性

采用反相悬浮聚合法制备了聚(丙烯酸/丙烯酰胺)(PAAM)、聚(丙烯酸/2-丙烯酰胺基-2-甲基丙磺酸)(PAAMPS)两种共聚高吸水树脂,并对两者的吸液吸附性能进行了比较.吸液成吸附初期,PAAM、PAAMPS在蒸馏水、NaCl等各种盐溶液中吸液倍率以及对金属离子溶液的吸附量随吸液或吸附时间的增加而迅速增加,约10 min达吸液、吸附平衡,且在各种盐溶液中的吸液倍率明显低于蒸馏水中的,PAAMPS的耐盐性比PAAM更好.高吸水树脂中AMPS代替AM后,对金属离子Cu2+、Cr3+的平衡吸附量几乎不变,但对Fe3+的平衡吸附量略有减小.PAAM较PAAMPS在CuCl2、FeCl3、CrCl3溶液中平衡吸液时间明显延长.     

Effect of complexation of poly(acrylic acid) with Cu2+ ions on the size of copper nanoparticles prepared via reduction in aqueous solutions

Sols of zero-valence copper are prepared via the chemical reduction of Cu(II) ions by hydrazine borane in aqueous solutions of high-molecular-mass poly(acrylic acid), which forms stable complexes with copper ions at 20°C in a wide pH range. The study of the composition of coordination centers, the ligand surrounding of metal ions, and the character of distribution of copper ions over poly(acrylic acid) coils in a wide range of solution compositions and pH values shows that the size of copper nanoparticles in the sols can be controlled by varying the ratio between ligand groups (carboxylate anions in poly(acrylic acid)) and copper ions in the reaction system during the synthesis of sols. This effect can be accomplished either by variation in the initial composition of solution or change in pH (the degree of ionization of the initial poly(acrylic acid) in the presence of copper ions).     

Determination of the glycosylation site of flavonoid monoglucosides by metal complexation and tandem mass spectrometry

Metal complexation and tandem mass spectrometry were used to differentiate C- and O-bonded flavonoid monoglucoside isomers. Electrospray ionization of solutions containing a flavonoid glycoside and a metal salt led to the generation of the key [M(II) (L) (L-H)](+) complexes, where M is the metal ion and L is the flavonoid glycoside. Thirteen flavonoid monoglucosides were examined in combination with Ca(II), Mg(II), Co(II), Ni(II), and Cu(II). Collisional activated dissociation (CAD) of the [M(II) (L) (L-H)](+) complexes resulted in diagnostic mass spectra, in contrast to the CAD mass spectra of the protonated, deprotonated, and sodium-cationized flavonoid glucosides. Five common sites of glycosylation could be predicted based on the fragmentation patterns of the flavonoid glucoside/magnesium complexes, while flavonoid glucoside/calcium complexes also were effective for location of the glycosylation site when MS(3) was employed. Cobalt, nickel and copper complexation had only limited success in this application. The metal complexation methods were also applied for characterization of a flavonoid rhamnoside, and the dissociation pathways of the metal complexes indicate that flavonoid rhamnosides have distinctive dissociation features from flavonoid glucosides.     

Fluorescence and viscometry study of complexation of poly(acrylic acid) with poly(acrylamide) and hydrolysed poly(acrylamide)

Interpolymer complexation of poly(acrylic acid) with poly(acrylamide) and hydrolysed poly(acrylamide) was studied by fluorescence spectroscopy and viscometry in dilute aqueous solutions. Changes in chain conformation and flexibility due to the interpolymer association are reflected in the intramolecular excimer fluorescence of pyrene groups covalently attached to the polymer chain. Both poly(acrylamide) and hydrolysed poly(acrylamide) form stable complexes with poly(acrylic acid) at low pH. The molecular weight of poly(acrylic acid) and solution properties such as pH and ionic strength were found to influence the stability and the structure of the complexes. In addition, the polymer solutions mixing time showed an effect on the mean stoichiometry of the complex. The intrinsic viscosity of the solutions of mixed polymers at low pH suggested a compact polymer structure for the complex.     

Synthesis,spectral, and antibacterial screening studies of chelating polymers of bisphenol-A–formaldehyde resin bearing barbituric acid

A new polymeric ligand was synthesized by the reaction of bisphenol-A and formaldehyde in the basic medium, followed by condensation polymerization with barbituric acid in the acidic medium. Polymer metal complexes were prepared by reaction of this resin with Mn(II), Co(II), Ni(II), Cu(II), and Zn(II). The polymeric resin and its metal polychelates were characterized by elemental analysis, FT-IR, ¹³C-NMR, and ¹H-NMR spectra. The geometry of the polymer metal complexes was evaluated by electronic spectra (UV-Vis) and magnetic moment measurement. Thermal stabilities show an increased thermal stability of the metal polychelates compared to the ligand. The antibacterial activities of all the synthesized polymers were investigated against Bacillus subtilis, Staphylococcus aureus, and Escherichia coli, showing good antibacterial activities against these bacteria. Cu(II) polychelate showed highest biocidal activity.