Electro-optic periodically poled lithium niobate Bragg modulator as a laser Q-switch

We report an electro-optic Bragg modulator using a periodically poled lithium niobate (PPLN) crystal. We measured a half-wave voltage of 160 V when transmitting a 1064 nm laser through a 14.2 mm long, 780 microm thick, 20.13 microm period PPLN crystal at the Bragg angle. We also demonstrated a Q-switched Nd:YVO(4) laser using such a PPLN Bragg modulator as its Q-switch, producing 7.8 ns, 201 microJ pulses at a 10 kHz repetition rate when pumped by a 19.35 W diode laser at 808 nm.     

Highly efficient single-pass frequency doubling of a continuous-wave distributed feedback laser diode using a PPLN waveguide crystal at 488 nm

A continuous-wave distributed feedback diode laser emitting at 976 nm was frequency doubled by the use of a periodically poled lithium niobate waveguide crystal with a channel size of 3 microm x 5 microm and an interaction length of 10 mm. A laser to waveguide coupling efficiency of 75% could be achieved resulting in 304 mW of incident infrared light inside the waveguide. Blue laser light emission of 159 mW at 488 nm has been generated, which equals to a conversion efficiency of 52%. The resulting wall plug efficiency was 7.4%.     

Efficient and stable single-photon counting at 1.55 microm by intracavity frequency upconversion

A single-photon signal at 1.55 microm was converted to the visible region by sum-frequency mixing with a strong pumping beam at 1064 nm in a periodically poled lithium niobate crystal placed in a diode-pumped Nd:YVO4 laser cavity. As the intracavity pump laser could be automatically stabilized without cavity lock, robust long-term stability was demonstrated for single-photon frequency upconversion, with a conversion efficiency of 74.3%. Such a stable single-photon upconversion was demonstrated to be efficient and robust for single-photon counting at 1550 nm, and the corresponding background noise was measured at less than 420 x 10(3) s(-1).     

Light-enhanced electro-optic spectral tuning in annealed proton-exchanged periodically poled lithium niobate channel waveguides

We report the observation of light-enhanced electro-optic spectral tuning in annealed proton-exchanged, asymmetric domain-duty-cycle periodically poled lithium niobate (PPLN) channel waveguides for second-harmonic generation. The spectral tuning rate was increased rapidly from 0.07 nm/(kV/mm) to a saturated value of 0.32 nm/(kV/mm) in a 30%/70% domain-duty-cycle PPLN waveguide when the fundamental pump power near 1534 nm was increased from 0.6 to 46 mW. The second-harmonic laser power at 767 nm was identified to be the source enhancing the spectral tuning.     

42%-efficient single-pass cw second-harmonic generation in periodically poled lithium niobate

We present a full-wafer fabrication process for periodically poled lithium niobate with a 6.5-mum domain period. Samples that were 53 mm long and 0.5 mm thick were obtained with this process for single-pass cw 1064-nm Nd:YAG second-harmonic generation. These samples exhibited 78% of the ideal nonlinear coefficient, had a measured conversion efficiency of 8.5% /W in the low-power limit, and produced 2.7 W of cw 532-nm output with 6.5 W of cw input, which corresponds to 42% power conversion efficiency.     

The ridge waveguide fabrication with periodically poled MgO-doped lithium niobate for green laser

Ridge waveguides were fabricated using an external field, a precision lapping machine and neutron loop discharge (NLD) in magnesium-oxide-doped lithium niobate. The measured quasi-phase-matching (QPM) wavelength of the second-harmonic generation (SHG) in a 30 mm long periodically poled magnesium-doped lithium niobate (PPMgLN) ridge waveguide which has a domain period of 6.8 μm is about 532 nm. A fabricated periodically poled magnesium-doped lithium niobate ridge waveguide was duty cycle of 51.9 ± 2.83% and demonstrated second-harmonic generation. By using this periodically poled magnesium-doped lithium niobate ridge waveguide, highly effective, low-cost optical devices with high power or short wavelength can be achieved.     

Observation of 99% pump depletion in single-pass second-harmonic generation in a periodically poled lithium niobate waveguide

We report 99% pump depletion in single-pass second-harmonic generation. Quasi-cw pulses at 1550 nm were frequency doubled in an annealed proton-exchanged waveguide formed in periodically poled lithium niobate. Measurements of pump depletion and second-harmonic generation agree with results from numerical integration of the coupled-mode equations that describe the process.     

Miniaturized diode laser module emitting green light at 532 nm with a power of more than 900 mW for next-generation holographic displays

We present a micro-integrated laser module based on an amplified diode laser and second harmonic generation which is a promising candidate for a green light source in next-generation 3D holographic displays. The light emitted by the amplified laser has a wavelength of 1064 nm, reaches a power up to 8.2 W and has a long coherence length of >400 m. For second harmonic generation, we tested two geometries of periodically poled lithium niobate crystals in single pass: a bulk crystal and a planar waveguide crystal. With the planar waveguide crystal, we achieve an output power >900 mW and a coherence length >20 m at a wavelength of 532 nm.     

Ultrabroadband tunable continuous-wave difference-frequency generation in periodically poled lithium niobate waveguides

We report, for what is the first time to our knowledge, widely tunable mid-IR light generation over a range of greater than 1000 nm in the 4 microm region by employing a single quasi-phase-matched periodically poled niobate waveguide at room temperature. The waveguide we used was fabricated by annealed proton exchange based on periodically poled lithium niobate. A peak conversion efficiency of 10%/W and a linewidth as small as 37 MHz were achieved. The developed mid-IR light generator may find wide applications in trace gas detection of multiple atmospheric species and high-resolution spectroscopy.     

Surface-emitted terahertz-wave generation by ridged periodically poled lithium niobate and enhancement by mixing of two terahertz waves

Surface-emitted terahertz- (THz-) wave generation by difference-frequency mixing with ridge-shaped periodically poled lithium niobate (PPLN) was demonstrated. The PPLN had a ridge height of 300 microm, a thickness of 20 microm, and an interaction length of 35 mm. The ridge behaves as a slab waveguide for optical pump beams. The PPLN gives rise to THz waves in opposite directions, perpendicular to the pump-beam direction. Reflecting the THz wave on one side and overlapping it with the THz wave on the other side increased the total THz-wave intensity approximately 2.7 times compared with that without reflection and mixing.     

Non-collinear nanosecond optical parametric oscillator based on periodically poled LN with tilted domain walls

We report on a non-collinear, 1064 nm pumped, 10 kHz repetition rate ns-OPO which consists of a 13 mm long periodically poled lithium niobate (PPLN) crystal in a hemispherical optical cavity. The non-collinear phase-matching is achieved by tilting the domains by 60° with respect to the pump beam. This phase-matching avoids back conversion of signal and idler radiation into pump radiation and thus improves the spatial quality of the generated OPO radiation considerably. At a pump power of 5.5 W the OPO provided a conversion efficiency of up to 34%. The generated OPO pulses with a total power of up to 1.85 W were emitted in an almost diffraction limited beam with a M²-value of 1.1. The beam quality did not change when the pump power was varied in the range of 2–5 W. PACS 42.65.-k; 42.65.Yj     

2.5-W, continuous-wave, 629-nm solid-state laser source

We report an efficient, high-power, cw, 629-nm laser source based on a diode-pumped Nd:YAG laser and a periodically poled lithium niobate (PPLN) frequency converter. This device integrates two separate frequency-conversion steps in a single crystal, taking advantage of the ability to fabricate PPLN with nearly arbitrary grating periods and phase-matching temperatures. This device uses a single PPLN crystal that has two grating regions in series. The first region quasi-phase matches a standard optical parametric oscillator process (1064nm?1540nm +3450nm), and the second region quasi-phase matches a sum-frequency process whereby the pump and the signal light make red light (1064nm+1540nm ?629nm). Using a four-mirror ring cavity, we were able to convert 21% of the 1064-nm pump to 629-nm output, yielding 2.5W of red output with 11.8W of input.     

周期性极化铌酸锂晶体中半非共线型宽带光学参变放大理论研究

基于周期性极化铌酸锂晶体(PPLN)的准相位匹配光参变放大过程,通过倾斜周期极化铌酸锂晶体中极化域(极化光栅)一定角度,实现了介于共线匹配方式和非共线匹配方式之间的一种半非共线型准相位匹配方式,并以该匹配方式下的各光矢量几何关系得出相位匹配曲线,找到在特定抽运光和信号光波长下能获得宽带增益放大的周期极化长度。并研究其极化倾斜角度与温度特性。模拟计算表明,在合适的角度与温度条件下,该方式可以532 nm抽运光抽运的信号光在800 nm和1064 nm处均获得宽带光参变放大。     

Actively Q-switched Nd:YVO4 laser using an electro-optic periodically poled lithium niobate crystal as a laser Q-switch

We demonstrate a low-voltage and fast laser Q-switching by using an electro-optic periodically poled lithium niobate (EO PPLN) crystal. The half-wave voltage measured from the EO PPLN crystal was 0.36 V x d (microm)/L (cm), where d is the electrode separation and L is the electrode length. When a 13-mm-long EO PPLN was used as a laser Q switch at 7-kHz switching rate, we measured an approximately 12-ns pulse width and approximately 0.74-kW laser pulses at 1064-nm wavelength from a diode-pumped Nd:YVO4 laser with continuous 1.2-W pump power at 809-nm wavelength.     

Low-threshold, high-efficiency, high-repetition-rate optical parametric generator based on periodically poled LiNbO3

We report a high-repetition-rate optical parametric generator (OPG) with a periodically poled lithium niobate (PPLN) crystal pumped by an acousto-optically Q-switched CW-diode-end-pumped Nd:YVO_4 laser. For the maximum 1064nm pump power of 970mW, the maximum conversion efficiency is 32.9% under the conditions of 250℃, 1064nm pulse repetition rate of 22.6kHz and pulse width of 12ns, and the PPLN OPG threshold in the collinear case is less than 23.7μJ. The output power increases with the increase of the crystal temperature. The 1485－1553nm signal wave and 3383－3754nm idler wave are obtained by changing the temperature and the angle of the PPLN crystal.     

Efficient and low-noise single-photon detection in 1550 nm communication band by frequency upconversion in periodically poled LiNbO3 waveguides

We demonstrate 1500 nm band single-photon detection with low dark-count noise and a potentially high efficiency, which may allow long distance and high-bit-rate quantum key distribution. By developing frequency upconversion devices based on periodically poled lithium niobate waveguides, which are specifically designed to use a pump wavelength longer than that of communication-band photons, we completely eliminate the dark-count noise caused by parasitic nonlinear processes in the waveguide. We observed an internal conversion efficiency as high as 40% and demonstrated scaling down to the single photon level while maintaining a background dark-count rate of 10(2)s(-1).     

Efficient continuous-wave eye-safe region signal output from intra-cavity singly resonant optical parametric oscillator

We report an efficient continuous-wave (CW) tunable intra-cavity singly resonant optical parametric oscillator based on the multi-period periodically poled lithium niobate and using a laser diode (LD) end-pumped CW 1064 nm Nd:YVO₄ laser as the pump source. A highly efficiency CW operation is realized through a careful cavity design for mode matching and thermal stability. The signal tuning range is 1401-1500 nm obtained by varying the domain period. The maximum output power of 2.2 W at 1500 nm is obtained with a 17.1 W 808 nm LD power and the corresponding conversion efficiency is 12.9%.     

Singly resonant optical parametric oscillation in periodically poled lithium niobate waveguides

We report quasi-phase-matched singly resonant optical parametric oscillation in electric-field-poled lithium niobate waveguides. Parametric gains as high as 250%/W, an oscillation threshold of 1.6 W (peak), idler output powers of 220 mW, and a tuning range of 1180-2080 nm for pump wavelengths of 756-772 nm have been observed. Pump depletion is limited to 40% because of the multiple launched transverse modes at the pump wavelength. We predict that fully optimized waveguide singly resonant oscillators can have thresholds of ~100 mW, accessible to cw diode pumping.     

Fabrication of periodically poled lithium niobate chips for optical parametric oscillators

An electric-field poling process was established that yielded uniform periodically poled lithium niobate (PPLN) in 0.5 mm thick lithium niobate substrate. We have fabricated 50 mm long fanned as well as multigrating PPLNs having period variations from 25 μm to 32 μm. These PPLNs are required for quasi-phase-matched (QPM) optical parametric oscillator (OPO) applications. We have also configured a bench-top OPO set-up based on these PPLNs.     

Waveguides in lithium niobate fabricated by focused ultrashort laser pulses

We report on investigations of the bulk microstructuring of lithium niobate crystals with intense femtosecond laser pulses. In different crystal cuts, optical waveguides were produced whose properties depend strongly on the processing parameters. To explore the origin of the refractive index changes, we subjected the crystals to different conditions (like temperature, illumination, etc.) while monitoring the waveguide output. This way several mechanisms for the change in refractive index could be singled out. These include the photorefractive effect, inhomogeneous ion concentrations and stress in the crystalline lattice. As an application, we demonstrate frequency doubling of 1064 nm laser radiation in a microstructured phase-matched waveguide.