压电层合梁静动力学分析的高精度梁单元

给出了一个对复合材料压电层合梁进行数值分析的高精度压电层合梁单元。基于Shi三阶剪切变形板理论的位移场和Layer-wise理论的电势场,用力-电耦合的变分原理及Hamilton原理推导了压电层合梁单元列式。采用拟协调元方法推导了一个可显式给出单元刚度矩阵的两节点压电层合梁单元,并应用于压电层合梁的力-电耦合弯曲和自由振动分析。计算结果表明,该梁单元给出的梁挠度和固有频率与解析解吻合良好,并优于其它梁单元的计算结果,说明了本文所给压电层合梁单元的可靠性和准确性。研究结果可为力-电耦合作用下压电层合梁的力学分析提供一个简单、精确且高效的压电层合梁单元。     

受非线性支承的板状梁结构流致振动研究

研究了受非线性支承的板状梁结构流致振动问题，采用二维不可压缩粘性流体模型，建立了板状梁的运动微分方程；研究非线性支承情况下的流体流速对振幅的影响，并对计算结果进行了分析，结果表明在非线性支承下板状梁结构在流体动压力作用下存在着复杂的动力学行为，像发生极限环颤振和屈曲等。     

基于一种简化剪切变形理论的层合梁自由振动分析

复合材料层合梁在航天航空、核工程、高速列车、建筑等领域有着重要的应用,其振动特性得到了广泛关注。本文针对复合材料层合梁结构,引入了一种新的简化剪切变形理论;同时考虑层间连续性条件,结合Ritz法求解了其振动频率,并与已有文献结果进行了对比。结果表明:两者吻合较好,误差基本保持在1%左右,验证了理论模型的有效性。基于该理论模型,重点研究了铺层方式、纤维铺设角度等关键参数对层合梁振动特性的影响。研究结果表明:对称铺设层合梁的一阶固有频率均高于非对称铺设层合梁的一阶固有频率,且随着铺设层数的增加,其振动频率会趋于稳定值;对比不同铺设角度的层合梁,纤维铺设角度为90°的层合梁的一阶固有频率最低。     

开放式内嵌流体柔性悬臂梁振颤失稳分析

针对开放式内嵌流体柔性悬臂梁流固耦合系统,在对流体运动和梁的振动作一定假设的前提下,综合考虑阻尼以及振动变形引起的梁轴向伸长等因素,建立了系统的耦合非线性动力学控制方程,导出了系统的状态空间方程和线性化扰动方程。运用代数判据求得了Hopf分岔临界流速须满足的条件,并采用经典Runge-Kutta法求解了系统的状态方程。研究结果表明:当流速大于临界流速时,系统的相空间将发生Hopf分岔,产生稳定的极限环;此时梁水平平衡位置的稳定性遭到破坏,在外界扰动的作用下,系统发生振颤失稳,梁以水平位置为中心作周期性振动。     

压电复合材料层合梁的分岔、混沌动力学与控制

研究了简支压电复合材料层合梁在轴向、横向载荷共同作用下的非线性动力学、分岔和混沌动力学响应. 基于vonKarman理论和Reddy高阶剪切变形理论,推导出了压电复合层合梁的动力学方程. 利用Galerkin法离散偏微分方程,得到两个自由度非线性控制方程,并且利用多尺度法得到了平均方程. 基于平均方程,研究了压电层合梁系统的动态分岔,分析了系统各种参数对倍周期分岔的影响及变化规律. 结果表明,压电复合材料层合梁周期运动的稳定性和混沌运动对外激励的变化非常敏感,通过控制压电激励,可以控制压电复合材料层合梁的振动,保持系统的稳定性,即控制系统产生倍周期分岔解,从而阻止系统通过倍周期分岔进入混沌运动,并给出了控制分岔图.      

复合材料层合梁的屈曲

本文在铁摩辛柯梁理论基础上,利用迭合刚度方法及Hamilton原理建立了层合梁屈曲问题控制方程,并用此控制方程求解了在具体边界条件下层合梁的屈曲问题,得出了无论在什么边界条件下层合梁的最小屈曲载荷不会大于等效剪切刚度系数C的结论.     

粘贴压电层功能梯度材料Timoshenko梁的热过屈曲分析

研究了上下表面粘贴压电层的功能梯度材料Timoshenko梁在升温及电场作用下的过屈曲行为。在精确考虑轴线伸长和一阶横向剪切变形的基础上,建立了压电功能梯度Timoshenko层合梁在热-电-机械载荷作用下的几何非线性控制方程。其中,假设功能梯度的材料性质沿厚度方向按照幂函数连续变化,压电层为各向同性均匀材料。采用打靶法数值求解所得强非线性边值问题,获得了在均匀电场和横向非均匀升温场内两端固定Timoshenko梁的静态非线性屈曲和过屈曲数值解。并给出了梁的变形随热、电载荷及材料梯度参数变化的特性曲线。结果表明,通过施加电压在压电层产生拉应力可以有效地提高梁的热屈曲临界载荷,延缓热过屈曲发生。由于材料在横向的非均匀性,即使在均匀升温和均匀电场作用下,也会产生拉-弯耦合效应。但是对于两端固定的压电-功能梯度材料梁,在横向非均匀升温下过屈曲变形仍然是分叉形的。     

一维六方准晶层合简支梁自由振动与屈曲的精确解

伪Stroh型公式能够将多场耦合材料的控制方程转化为线性特征系统来求解,从而获得多层结构简支边界条件的精确解.本文利用伪Stroh型公式,研究一维六方准晶层合简支梁的自由振动和屈曲问题,通过传递矩阵法,获得准晶层合梁自由振动固有频率与临界屈曲载荷的精确解.通过与已有梁的剪切变形理论结果比较,验证了本文伪Stroh型公式的正确性和有效性.通过数值算例,分析由两种不同准晶材料组成的三明治层合梁的叠层方式、高跨比、层厚比及层数对梁的固有频率、临界屈曲载荷及其模态的影响规律.结果表明,叠层顺序和梁的高跨比、层厚比对准晶层合梁的自由振动固有频率和临界屈曲载荷有很大影响,可通过调整梁的几何尺寸和叠层顺序得到准晶层合梁的最佳固有频率和临界屈曲载荷.本文给出的精确解可为工程上研究准晶梁的各种数值解法和实验方法提供理论参考.     

复合材料水翼水动力与结构强度特性数值研究

针对复合材料水翼存在的流固耦合求解问题,结合其自身特有属性,对复合材料水翼结构变形特性进行了数值仿真计算研究.研究建立了复合材料水翼流固耦合数值计算模型,并将数值计算结果与Zarruk等的实验结果进行对比,验证模型的正确性,得出复合材料水翼尖端扭转角随雷诺数的增加而增加的研究结论.基于数值计算模型,系统地研究了不同铺层角对复合材料水翼水动力特性及强度特性的影响,结果表明:不同铺层角复合材料水翼的尖端扭转角,随铺层角的增大而减小,而其尖端位移量随铺层角的增大先减小后增大.为了削弱工程常数的影响对复合材料水翼变形的影响,研究提出了无量纲扭转角和无量纲位移量,进一步探究复合材料水翼结构的弯扭耦合作用对其变形特性的影响.最后利用蔡-吴失效准则进行复合材料水翼强度特性的判断和分析,结果表明:不同铺层角复合材料水翼的蔡-吴系数,随铺层角的增大呈现先减小后增大的趋势,其中0°铺层时的复合材料水翼蔡-吴系数最小,50°铺层时的复合材料水翼的蔡-吴系数最大.     

SMA纤维复合材料梁振动半主动控制

分析了一类形状记忆合金(SMA)纤维混杂层合粱用于振动控制的动力学模型和作用机理．采用多胞模型、形状记忆合金一维本构关系分析方法，同时考虑横向剪切的影响，建立了层合梁的数学模型．半主动控制是通过改变受控结构的参数来减小结构振动的响应．根据开关控制原理确定可变刚度系统的控制律，进行SMA纤维混杂层合粱的半主动控制的数值仿真．结果表明，将半主动控制应用于梁的振动控制是一种有效的方法．     

含脱层损伤复合材料层合梁的冲击动力屈曲

针对含初始缺陷和脱层损伤的复合材料层合梁的轴向冲击动力屈曲问题进行了分析。基于Hamilton原理导出了考虑初始缺陷、轴向和横向惯性、横向剪切变形以及转动惯性影响时含脱层损伤复合材料梁的非线性动力屈曲控制方程;基于B-R准则,采用有限差分方法求解了受轴向冲击载荷作用下含脱层损伤复合材料梁的动力屈曲问题;讨论了冲击速度、初始几何缺陷、铺层角度以及脱层长度等因素对复合材料层合梁动力屈曲的影响。     

Thermal buckling and postbuckling of laminated composite beams with temperature-dependent properties

The thermal buckling and postbuckling analysis of laminated composite beams with temperature-dependent material properties is presented. The governing equations are based on the first-order shear deformation beam theory (FSDT) and the geometrical nonlinearity is modeled using Green's strain tensor in conjunction with the von Karman assumptions. The differential quadrature method (DQM) as an accurate, simple and computationally efficient numerical tool is adopted to discretize the governing equations and the related boundary conditions. A direct iterative method is employed to obtain the critical temperature (bifurcation point) as well as the nonlinear equilibrium path (the postbuckling behavior) of symmetrically laminated beams. The applicability, rapid rate of convergence and high accuracy of the method are established via different examples and by comparing the results with those of existing in literature. Then, the effects of temperature dependence of the material properties, boundary conditions, length-to-thickness ratios, number of layers and ply angle on the thermal buckling and postbuckling characteristic of symmetrically laminated beams are investigated.     

含脱层损伤复合材料层合梁冲击动力响应实验研究

对纤维增强复合材料层合梁在受轴向冲击时的动力响应问题进行了实验研究。实验以单向玻璃纤维布和环氧树脂材料制作试件,在层间预埋薄铜箔模拟脱层损伤。采用激光测速仪测量子弹速度,动态应变仪和TDS420A数字示波器记录应变时程曲线进行动力响应分析。实验结果表明铺层角度是决定材料性能的主要原因,脱层损伤的存在及大小对动力响应和发生动力屈曲有重要影响。此外,初始缺陷的影响也是不可忽视的重要因素。     

Bending–stretching analysis of moderately thick functionally graded anisotropic wide beams

This paper presents an analytical solution for static analysis of moderately thick laminated composite wide beams whose fiber orientation angle varies continuously through the thickness direction. Since these anisotropic beams have such a monoclinic stiffness matrix form, the strain components which are ignored for isotropic wide beams must be taken into account. To this end, a refined displacement field taking into account the entire shear strains is used. The equilibrium equations are obtained and solved analytically for beams with different boundary conditions. Stress and displacement components of the functionally graded (FG) beam are obtained, and the effects of FG parameter, boundary condition and length–thickness ratio are studied.     

Nonlinear vibration of functionally graded graphene-reinforced composite laminated beams resting on elastic foundations in thermal environments

Modeling and nonlinear vibration analysis of graphene-reinforced composite (GRC) laminated beams resting on elastic foundations in thermal environments are presented. The graphene reinforcements are assumed to be aligned and are distributed either uniformly or functionally graded of piece-wise type along the thickness of the beam. The motion equations of the beams are based on a higher-order shear deformation beam theory and von Kármán strain displacement relationships. The beam–foundation interaction and thermal effects are also included. The temperature-dependent material properties of GRCs are estimated through a micromechanical model. A two-step perturbation approach is employed to determine the nonlinear-to-linear frequency ratios of GRC laminated beams. Detailed parametric studies are carried out to investigate the effects of material property gradient, temperature variation, stacking sequence as well as the foundation stiffness on the linear and nonlinear vibration characteristics of the GRC laminated beams.     

Free vibration analyses of axially loaded laminated composite beams based on higher-order shear deformation theory

The dynamic stiffness matrix method is introduced to solve exactly the free vibration and buckling problems of axially loaded laminated composite beams with arbitrary lay-ups. The Poisson effect, axial force, extensional deformation, shear deformation and rotary inertia are included in the mathematical formulation. The exact dynamic stiffness matrix is derived from the analytical solutions of the governing differential equations of the composite beams based on third-order shear deformation beam theory. The application of the present method is illustrated by two numerical examples, in which the effects of axial force and boundary condition on the natural frequencies, mode shapes and buckling loads are examined. Comparison of the current results to the existing solutions in the literature demonstrates the accuracy and effectiveness of the present method.     

A new super convergent thin walled composite beam element for analysis of box beam structures

In this paper, a new composite thin wall beam element of arbitrary cross-section with open or closed contour is developed. The formulation incorporates the effect of elastic coupling, restrained warping, transverse shear deformation associated with thin walled composite structures. A first order shear deformation theory is considered with the beam deformation expressed in terms of axial, spanwise and chordwise bending, corresponding shears and twist. The formulated locking free element uses higher order interpolating polynomial obtained by solving static part of the coupled governing differential equations. The formulated element has super convergent properties as it gives the exact elemental stiffness matrix. Static and free vibration analyses are performed for various beam configuration and compared with experimental and numerical results available in current literature. Good correlation is observed in all cases with extremely small system size. The formulated element is used to study the wave propagation behavior in box beams subjected to high frequency loading such as impact. Simultaneous existence of various propagating modes are graphically captured. Here the effect of transverse shear on wave propagation characteristics in axial and transverse directions are investigated for different ply layup sequences.     

A continuum theory for viscoelastic composite beams

Summary A dynamical continuum theory is developed for laminated composite beams. Starting with an assumed displacement- and temperature field, the one-dimensional approximate theory is consistently constructed within the frame of the three-dimensional theory of linear, nonisothermal, anisotropic, coupled viscoelasticity. Each constituent of the beam may possess different constant thickness and mechanical properties. All dynamic interactions between the adjacent constituents are included. Further, the effects of transverse shear and normal strains and rotatory inertia as well as those of cross-sectional distortion are all taken into account. The resulting equations consist of the macroscopic beam equations of motion and heat conduction, the kinematical relations, the initial and boundary conditions and the constitutive equations, and they govern the extensional, flexural and torsional motions of laminated composite beams. The special cases of constituents which made of either isotropic thermoviscoelastic or anisotropic thermoelastic materials are discussed briefly.Supported by the Office of Naval Research.With 1 figure