Characterisation of the surface composition in electrospun nanowebs with static secondary ion mass spectrometry (S-SIMS)

Electrospinning is a recently rediscovered method to produce non-woven nanowebs of which the individual polymer fibres have diameters of 50-500 nm. Applications require specific functionalities to be present at the surface. The use of additives in the electrospun solution provides an elegant alternative to functionalised polymers. This study has focused on the use of the static secondary ion mass spectrometry (S-SIMS) to characterise the surface composition of nanofibres electrospun from acetone solutions containing 15% (w/w) of poly(?-caprolactone) (PCL, molecular weight 40,000) and 0-15 mol% (relative to PCL) cetyltrimethylammonium bromide (CTAB). Specifically, the calibration of the relative signal intensities of structural ions from PCL and CTAB as a function of the local concentrations requires adequate reference samples to be prepared. In general, this step becomes a major bottleneck in nanoscale analysis. A relatively simple method using a combination of spincoating and hand barcoating of solutions has been developed. Its applicability and limitations for monitoring the surface enrichment of CTAB in PCL nanowebs are discussed.     

Time-of-flight secondary ion mass spectrometry (TOF-SIMS) of polyisoprenes

Polyisoprenes (PIPs) with average molecular weights from 650 to 800,000 Da have been studied by time-of-flight secondary ion mass Spectrometry (TOF-SIMS) in the static mode. Polymer samples were bombarded by argon primary ions, and positive SIMS spectra were collected. Effects of branching and unsaturation in the polymer structure on ion formation were studied. The pendant methyl group showed little tendency to fracture as a cation. In the low mass region, C_nH _2n–1 ⁺ appeared to be more intense than C_nH _2n+1 ⁺ , attributed to the double bond structure of polyisoprene. Additionally, ion formation varied as a function of polymer molecular weight. Cationized intact oligomers and fragments dominate the high mass region. Oligomer distributions were used to calculate average molecular weights for polyisoprenes. A statistical chain scission mechanism was used to qualitatively explain the formation of five clusters within a unique fragmentation pattern. Detailed studies of the cluster structure pointed out that each cluster contained several species having varied degrees of unsaturation. It is believed that double bond rearrangements occur.     

Estimation of useful yields for electrospray droplet impact/secondary ion mass spectrometry (EDI/SIMS)

Useful yield for electrospray droplet impact/secondary ion mass spectrometry was estimated. The mixtures of C₆₀/rhodamine B and C₆₀/Aerosol OT were used as the samples for the positive and negative mode of operations, respectively. By assuming that (i) the desorption efficiencies are about the same for C₆₀, rhodamine B and Aerosol OT, and (ii) desorption of ionic compounds directly gives the secondary ion signals, the useful yields (i.e. total ions generated divided by the total molecules desorbed) for C₆₀ were estimated to be ~0.1. This value should be regarded as the upper limit because the neutralization of positive and negative ions in the plume and desorption of ionic compounds as neutral species are not taken into account. Copyright © 2012 John Wiley & Sons, Ltd.     

Image processing in secondary ion mass spectrometry

The application of image processing in secondary ion mass spectrometry is discussed. The Cameca 4f SIMS uses a single microchannel plate and a highly sensitive camera in combination with an image processor with real time capabilities (Kontron IBAS). An automation procedure with image integration, extended dynamic range image acquisition and retro depth profiling is presented and illustrated with practical applications.     

Application of pattern recognition methods in secondary ion mass spectrometry

Pattern recognition methods were applied to SIMS spectra of aluminum and manganese borides to test if proper feature selection and distinction between the various compounds on the basis of the evaluation of cluster ions is possible. It was found that the features selected on an empirical basis could be reduced for practical application from 13 and 11 to 2–3 and 5–8 for aluminum borides and manganese borides, respectively, and that identification of the different compounds is possible by evaluation of the fragmentation pattern. Furthermore, there is evidence that this approach does not only work for pure compounds but also for specimens, where the interesting species is only a minor fraction in the analysed volume.     

Classification of secondary ion mass spectrometry (SIMS) micrographs to characterize chemical phases

This work demonstrates the potential of multivariate image analysis methods in the extraction of useful, problem dependent information from SIMS images. Specific algorithms have been developed to classify SIMS micrographs manually as well as automatically. A feature selection has been achieved by means of principal component analysis with a subsequent image classification.As an application example for these improved digital image processing tools chemical phases within a soldered industrial metal sample have been identified. This is of highly practical value as it was assumed that during the soldering process inhomogeneities occur along the joint site which cause a cracking of the brazed material under mechanical strain conditions.     

Static secondary ion mass spectrometry for nanoscale analysis: surface characterisation of electrospun nanofibres

The viability of static secondary ion mass spectrometry (S-SIMS) for selected applications of nanoscale analysis has been investigated, focusing on nanofibres produced by electrospinning (ES) as a test case. The samples consist of non-woven nanowebs of which the individual fibres have diameters in the range of 100 nm. Use of solutions with functionalised polymers or polar additives potentially allows the surface composition to be tailored as a function of the application. So far nanowebs are primarily characterised by morphological examination. This paper describes the first detailed characterisation of molecular composition at the surface of nanofibres electrospun from poly(epsilon-caprolactone) (PCL) solutions in acetone containing 0-15 mol% (relative to PCL) of cetyltrimethylammonium bromide (CTAB). Application of S-SIMS to nanowebs has allowed mass spectra to be recorded containing the major diagnostic ions of both components. Their relative intensities point to surface enrichment and depletion of the polar CTAB additive relative to the PCL matrix for samples electrospun from solution containing low and high CTAB concentrations, respectively.     

Lipid imaging in the zebra finch brain with secondary ion mass spectrometry

Lipids have diverse functions in the nervous system, but the study of their anatomical distributions in the intact brain is rather difficult using conventional methodologies. Here we demonstrate the application of high resolution time-of-flight (ToF) secondary ion mass spectrometry (SIMS) to image various lipid components and cholesterol across an entire brain section prepared from an adult zebra finch (Taeniopygia guttata), with a spatial resolution of 2.3 μm, resulting in the formation of 11.5 megapixel chemical images. The zebra finch is a songbird in which specific neural and developmental functions have been ascribed to discrete “song control nuclei” of the forebrain. We have observed a relative increase of palmitic acid C16:0 and oleic acid C18:1 in song control nuclei versus the surrounding tissue, while phosphate (PO₃⁻), representative of phospholipids, was lower in these regions. Cholesterol was present at a high level only in the white matter of the optic tectum. More diffuse distributions were observed for stearic, arachidonic, linolenic, and palmitoleic acids. The presented results illustrate that SIMS imaging is a useful approach for assessing changes in lipid content during song circuit development and song learning.     

Detection of peptides in high concentration of salts by electrospray droplet impact/secondary ion mass spectrometry

Electrospray droplet impact (EDI)/SIMS is a new desorption/ionization technique for mass spectrometry. EDI/SIMS utilizes large multiply charged water clusters produced by atmospheric pressure electrospray as primary projectiles. It was found to afford extremely soft desorption/ionization compared with conventional SIMS, and has been used for detection of peptides and proteins. In this study, EDI/SIMS was applied to the detection of peptide in a highly concentrated NaCl solution. The persistent appearance of peptide ions for 1 ppm peptides in NaCl is probably because of the segregation of peptides on the crystallized salts. The samples dried under vacuum gave better EDI/SIMS mass spectra than those under ambient atmospheric pressure. Copyright © 2011 John Wiley & Sons, Ltd.     

Static secondary ion mass spectrometry for organic and inorganic molecular analysis in solids

The use of mass spectra in secondary ion mass spectrometry (S-SIMS) to characterise the molecular composition of inorganic and organic analytes at the surface of solid samples is investigated. Methodological aspects such as mass resolution, mass accuracy, precision and accuracy of isotope abundance measurements, influence of electron flooding and sample morphology are addressed to assess the possibilities and limitations that the methodology can offer to support the structural assignment of the detected ions. The in-sample and between-sample reproducibility of relative peak intensities under optimised conditions is within 10%, but experimental conditions and local hydration, oxidation or contamination can drastically affect the mass spectra. As a result, the use of fingerprinting for identification becomes compromised. Therefore, the preferred way of interpretation becomes the deductive structural approach, based on the use of the empirical desorption–ionisation model. This approach is shown to allow the molecular composition of inorganic and organic components at the surface of solids to be characterised. Examples of inorganic speciation and identification of organic additives with unknown composition in inorganic salt mixtures are given. The methodology is discussed in terms of foreseen developments with respect to the use of polyatomic primary ions.     

Particle isolation for analysis of uranium minor isotopes in individual particles by secondary ion mass spectrometry

A new technique to measure ²³⁴U/²³⁸U and ²³⁶U/²³⁸U isotope ratios for individual particles in environmental samples was developed, which was a combination of particle isolation under scanning electron microscope (SEM) and secondary ion mass spectrometry (SIMS). The technique was verified by measuring ²³⁴U/²³⁸U and ²³⁶U/²³⁸U isotope ratios in individual particles in a simulated environmental sample containing uranium standard (NBL CRM U010) and Pb metal particles. When the uranium particles were not isolated, the relative deviations of the measured isotope ratios from the reference values increased with increasing the signal intensity ratio of ²⁰⁸Pb to ²³⁸U, which was due to the molecular ion interferences by the Pb particles co-existing in the sputtered area. By the isolation of individual uranium particles, the interferences were eliminated and the measured isotope ratios were in good agreement with the reference values. The maximum relative deviations among 20 particles were 8.9% for ²³⁴U/²³⁸U and 13.1% for ²³⁶U/²³⁸U isotope ratios, respectively. The technique was also successfully applied to the analysis of a real swipe sample containing various kinds of elements.     

Static secondary ion mass spectrometry for the surface characterisation of individual nanofibres of polycaprolactone functionalised with an antibacterial additive

Electrospinning (ES) of polymer solutions generates non-woven webs of nanofibres. The fibre diameter ranges between 10 nm and 1 μm depending on the operating conditions. Surface functionalisation can be performed by the use of suitable additives. Detailed characterisation of the molecular composition at the fibre surface is a key issue. Biodegradable nanowebs with potential antibacterial activity have been prepared by ES of solutions containing polycaprolactone (PCL) and a functionalising additive with PCL segments and hexyldimethylammonium groups (PCLhexaq). Static secondary ion mass spectrometry with Bi₃⁺ projectiles has been applied to individual nanofibres. The positive ion mass spectra contain several signals with high structural specificity allowing the presence of PCLhexaq to be traced back in spite of its low concentration (0.16–1.4% w/w relative to PCL) and its structural similarity to the PCL fibre matrix. Imaging of structural ions visualises the homogeneous distribution of PCLhexaq over the fibre surface. Quantifying the surface concentration of PCLhexaq relative to that of PCL reveals electric field-driven surface enrichment of the additive during ES. Finally, nanofibres subjected to leaching in water for up to 72 h have been analysed. The PCLhexaq surface concentration decreases almost linearly with time at a rate of 0.6% h⁻¹.     

Electrospray droplet impact/secondary ion mass spectrometry (EDI/SIMS) using NaF and AgF as cationization matrices

In our previous paper, it was suggested that metal fluorides may be useful as cationization matrices in Electrospray droplet impact/SIMS. In this work, NaF and AgF were used as the cationization matrices for cyclodextrin (CD), polyethylene glycol (PEG), polystyrene (PS), garlic juice, and sliced raw rice. EDI mass spectra were measured without and with the use of matrices. Enhancement of ion abundances of [M + Na]⁺ for CD and PEG with NaF matrix and that of [M + Ag]⁺ for PS with AgF matrix were observed. However, the addition of matrices was not effective for the cationization of garlic juice and sliced raw rice samples. This may be due to the Coulombic repulsion of the reagent ions of Na⁺ or Ag⁺ with the preformed K⁺ adducts of oligosaccharides already present in the samples. Copyright © 2015 John Wiley & Sons, Ltd.     

Time-of-flight secondary ion mass spectrometry (TOF-SIMS):--versatility in chemical and imaging surface analysis

Time-of-flight secondary ion mass spectrometry (TOF-SIMS) has emerged as one of the most important and versatile surface analytical techniques available for advanced materials research. This arises from its excellent mass resolution, sensitivity and high spatial resolution providing both chemical and distributional (laterally and depth) information for a wide variety of materials and applications. Understanding the various modes of operation and the information that each provides is crucial to the analyst in order to optimise the type of data that is obtained. New developments in primary ion sources and the application of multivariate analysis techniques, which can only extend the versatility and applicability of the technique, are also discussed.     

Determination of the quaternary ammonium ion components of Aliquat 336 by electrospray mass spectrometry

A procedure is described for the identification and determination of the quaternary ammonium ion components of the commercial solvent extraction reagent Aliquat 336 using Electro Spray Mass Spectrometry (ESMS). The procedure is extremely rapid when compared with an existing procedure based on gas chromatography and produces comparable results in terms of accuracy and precision.     

Application of the interference standard method for the determination of sulfur, manganese and iron in foods by inductively coupled plasma mass spectrometry

The interference standard method (IFS) is evaluated to improve the accuracy of the determination of S, Mn and Fe in meat and grain samples by inductively coupled plasma quadrupole mass spectrometry (ICP-QMS). Due to ICP-QMS relatively low resolution, polyatomic interferences caused by ¹⁶O₂⁺, (¹⁶OH)₂⁺, ⁴⁰Ar¹⁴NH⁺, and ⁴⁰Ar¹⁶O⁺, for example, can compromise determinations at m/z 32, 34, 55, and 56, respectively. In IFS, differently from traditional internal standard methods, plasma naturally occurring species are used to correct for variations in the interference signal rather than the analyte signal. The method is based on the hypothesis that the interfering ion and the IFS probe present similar behaviors in the plasma, and that by using the analytical (analyte plus interference)/IFS signal ratio one could reduce variations due to interference and, consequently, improve accuracy. In this work, this strategy is evaluated in real sample applications and significant improvements on accuracy are observed for ³²S, ³⁴S, ⁵⁵Mn, and ⁵⁶Fe determinations. Recoveries ranging from 72% for Mn to 105% for Fe in two different standard reference materials are obtained using the ³⁸Ar probe. These analytes are successfully determined in meat and grain samples with concentrations ranging from 4.42 μg g⁻¹ for Mn in corn to 7270 μg g⁻¹ for S in chicken liver. The method is compared with other strategies such as internal standardization and mathematical correction. No instrumental modification or introduction of foreign gases is required, which is especially attractive for routine applications.     

Static secondary ionization mass spectrometry analysis of tributyl phosphate on mineral surfaces: Effect of Fe(II)

The static secondary ionization mass spectrometry (SIMS) spectrum of tri-n-butyl phosphate (TBP) on a variety of basalt and quartz samples is affected by the chemical composition of the mineral surface. When TBP is adsorbed on Fe(II)-bearing surfaces, the compound undergoes concomitant H^? abstraction and reduction, followed by the elimination of two C₄H₈ molecules to form an ion at m/z 137⁺. When TBP is adsorbed to quartz or other nonreducing surfaces, it merely undergoes protonation and elimination of three C₄H₈ molecules to form H₄PO ₄ ⁺ . When TBP is adsorbed to Fe(III)-bearing surfaces, it undergoes H^? abstraction and elimination of two C₄H₈ molecules, to form an ion at m/z 153⁺. These conclusions are supported by model studies that employed FeO, Fe₂0₃, TBP, and tributyl phosphite. The results show that the SIMS spectrum is very sensitive to the mode of TBP adsorption on the mineral surface.     

X‐ray photoelectron spectroscopy and time‐of‐flight secondary ion mass spectrometry characterization of aging effects on the mineral fibers treated with aminopropylsilane and quaternary ammonium compounds

X‐ray photoelectron spectroscopy (XPS) and time‐of‐flight secondary ion mass spectrometry were used to investigate the aging effects on the aminopropylsilane (APS) and quaternary ammonium surfactant‐treated mineral fibers. APS‐coated mineral fiber samples were treated with cationic surfactant and mineral oil and aged at 70 °C temperature and 95% humidity. From quantitative XPS measurements, an increase in the atomic composition of oxygen, nitrogen, and silicon is observed after aging. An increase in the protonated amino groups in the N1s high‐resolution spectra and C–N group in the C1s high‐resolution spectra is also observed. These results indicate that the concentration of hydrocarbon groups decreases after aging due to the partial removal of the long hydrocarbon chains of the surfactant and mineral oil and/or hydrolysis and segregation of APS to the fiber surface. The principal component analysis (PCA) was applied to the time‐of‐flight secondary ion mass spectrometry spectra, and an increase in the intensities of APS characteristic peaks were observed after aging. The observed increase in the signals of APS originates from underlying silanized fibers after the removal of the surfactant and mineral oil from the surface. Copyright © 2012 John Wiley & Sons, Ltd.