Highly chemoselective hydrogenation method using novel finely dispersed palladium catalyst on silk-fibroin: its preparation and activity

A palladium-fibroin complex (Pd/Fib) was prepared by soaking silk-fibroin in MeOH solution of Pd(OAc)₂ for 2 days (under Ar atmosphere)—4 days (under air). Pd(OAc)₂ was gradually absorbed by fibroin and the rapid reduction of fibroin conjugated Pd(OAc)₂ proceeded with MeOH as a reductant at room temperature to be the Pd(0) complex. Pd/Fib catalyzed chemoselective hydrogenation of acetylenes, olefins and azides in the presence of aromatic ketones and aldehydes, halides, N-Cbz protective groups and benzyl esters which are readily hydrogenated using Pd/C or Pd/C(en) as a catalyst.     

Synthesis of Enaminone‐Pd(II) Complexes and Their Application in Catalysing Aqueous Suzuki‐Miyaura Cross Coupling Reaction

A series of Pd(II)‐enaminone complexes, termed Pd(eao)₂, have been synthesized and characterized. The investigation on the catalytic activities of these new Pd(II)‐reagents has proved that the Pd(eao)₂‐ 1 possesses excellent catalytic activity for the Suzuki‐ Miyaura cross coupling reactions of aryl bromides/chlorides with aryl/vinyl boronic acids in the environmentally benign media of aqueous PEG400 at low loading (5 mol‰). The superiority of this Pd(II)‐reagent to those commercial Pd(II) and Pd(0) catalysts in catalyzing the reactions has been confirmed by parallel experiments. What's more, Pd(eao)₂‐ 2 has been found as a practical catalyst for the homo‐coupling reactions of aryl boronic acids.     

Design of Novel Hexametallic Cartwheel Molecules from Persubstituted Benzene Compounds

The cartwheel complexes A are novel, nano-sized hexametallic species available from persubstituted benzenes C₆[3,5-(CH₂Y)₂C₆H₃] (Y=NMe₂, P(O)Ph₂, PPh₂, SPh). The molecular structure of A (Y=SPh, ML_n=PdCl) shows C₃ symmetry with adjacent radial Pd−Pd separations of 7.339(2) and 8.006(2) Å and a diametrically opposed Pd−Pd separation of 15.340(2) Å. Because of their size hexametallic species such as A are potential homogeneous catalysts in organic reactions which can be recovered by nanomembrane filtration techniques.     

Factors determining the chemoselectivity of phosphorus-modified palladium catalysts in the hydrogenation of chloronitrobenzenes

The precursor nature effect on the state of the Pd–P surface layer in palladium catalysts and on their properties in the liquid-phase hydrogenation of chloronitrobenzenes under mild conditions has been investigated. A general feature of the Pd–P-containing nanoparticles obtained from different precursors and white phosphorus at P/Pd = 0.3 (PdCl₂ precursor) and 0.7 (Pd(acac)₂ precursor) is that their surface contains palladium in phosphide form (BE(Pd3d _5/2) = 336.2 eV and BE(Р2р) = 128.9 eV) and Pd(0) clusters (BE(Pd3d_5/2) = 335.7 eV). Factors having an effect on the chemoselectivity of the palladium catalysts in chloronitrobenzenes hydrogenation are considered, including the formation of small palladium clusters responsible for hydrogenation under mild conditions.     

Facilitated transport of palladium(II) across polymer inclusion membrane with ammonium ionic liquid as effective carrier

This work focuses on the application of polymer inclusion membrane (PIM) with tricaprylmethylammonium thiosalicylate, [A336][TS] (TOMATS), a thiol-containing task-specific ionic liquid for the transport of Pd(II) ions from aqueous solutions. 0.3 M thiourea in 0.1 M hydrochloric acid was found the most effective stripping phase in the transport of Pd(II) from membrane phase containing TOMATS. Separation of Pd(II) ions was also carried out from hydrochloric acid solution containing Pt(IV), Fe(III), Ni(II), and Mn(II). Pd(II) ions were preferably transported in the presence of these metal ions. The separation coefficients followed the order: S _Pd/Pt < S _Pd/Fe < S _Pd/Ni < S _Pd/Mn. [A336][TS] proved to be an excellent ion carrier for Pd(II) from hydrochloric acid solution. The results also showed that transport efficiency of the PIM was reproducible and it can be useful for the development of the simple and highly effective method of Pd(II) recovery from leach liquor of spent catalysts.     

Reactions of Pd-PEPPSI complexes with protic acids

The Pd-PEPPSI complexes widely used to catalyze numerous reactions eliminate the pyridine ligand on treatment with protic acids to give binuclear complexes [Pd(NHC)X₂]₂ with the Pd–X–Pd (X = Cl, Br, I) bridging bonds. The reaction proceeds with high yields (78–98%) and can be regarded as a preparative approach to binuclear complexes. A prolonged heat treatment of either Pd-PEPPSI complexes or binuclear [Pd(NHC)X₂]₂ complexes in the presence of strong protic acids results in the Pd–NHC bond cleavage to give azolium salts (proligands) and palladium salts.     

A new type of palladium(0) complex having both electron-withdrawing and -donating sites in a ligand: 5,8-dihydro- and 5,8,9,10-tetrahydro-1,4-naphthoquinone complexes

A new type of palladium(0) complex, (5,8-dihydro-1,4-naphthoquinone)Pd(PPh₃)₂ and (5,8,9,10-tetrahydro-1,4-naphthoquinone)Pd(PPh₃)₂, having both olefin and quinone or dihydro-quinone sites in a ligand molecule was prepared. IR and ¹H NMR spectroscopic studies of these complexes suggested that it is the quinone or dihydro-quinone CC bond which is complexed to Pd. Ligand exchange reactions showed that the stability order of the olefinic quinone complexes was as follows: (1,4-naphthoquinone)Pd(PPh₃)₂ > (5,8-dihydro-1,4-naphthoquinone) Pd(PPh₃)₂>(5,8,9,10-tetrahydro-1,4-naphthoquinone)Pd(PPh₃)₂.     

Synthesis of 8‐Oxoberbines and Related Benzolactams by Pd(OAc)2‐Catalyzed Direct Aromatic Carbonylation

A variety of alkoxy‐substituted benzolactams with a berbine or yohimbane skeleton were prepared from 1‐benzyl‐1,2,3,4‐tetrahydroisoquinolines or 1‐benzyl‐1,2,3,4‐tetrahydro‐β‐carbolines by a phosphine‐free Pd(II)‐catalyzed direct aromatic carbonylation in a Pd(OAc)₂‐Cu(OAc)₂ catalytic system. The site selectivity was compared with that of the carbonylation with Pd(OAc)₂ or Pd(OAc)₂·2 PPh₃, respectively.     

Direct Synthesis of Polycarbonate from Carbon Monoxide and Bisphenol A Using Efficient Pd Complex Catalyst Systems

A direct oxidative carbonylation procedure of Bisphenol A to polycarbonate catalyzed with efficient Pd complex systems has been developed. Pd/2,2′‐bipyridyl complexes possessing 6,6′‐dimethyl substituents, Pd/2,2′‐biquinoline complexes, and dinuclear Pd complexes bridged with a pyridylphosphine ligand were found to give higher molecular weights and yields than conventional Pd catalyst systems. Highest molecular weight (M̄_n = 5 600, M̄_w = 12 900) and yield (86%) were obtained using the Pd/6,6′‐dimethyl‐2,2′‐bipyridyl complex system.     

Synthesis and Complexation of 1,2-Bis[(monoaza[15]crown-5)-N-yl]glyoxime. Crystal Structure of (1,2-Bis[(monoaza[15]crown-5)-N-yl]glyoximato)palladium(II)

A new vicinal dioxime ligand with two crown-ether groups, 1,2-bis[(monoaza[15]crown-5)-N-Yl]-glyoxime(LH₂), has been prepared from cyanogen di-N-oxide and monoaza[15]crown-5. Ni(II), Pd(II), and Pt(IV) complexes of LH₂ with or without alkali-metal ions bound to macrocyclic groups have been isolated. The high affinity of [Pd(LH)₂] and [Ni(LH)₂] for the K⁺ ion is observed in solvent extraction experiments. A single-crystal X-ray structure confirms the postulated geometry of [Pd(LH)₂]- The Pd-atom of the centro-symmetric molecule has square-planar PdN₄ coordination where Pd–N distances range from 1.978(3) to 1.970(3) Å. The N–Pd–N intraligand angle is 79.9(1)^°.     

Enhanced catalytic performance of Pd‐Ga bimetallic catalysts for 2‐ethylanthraquinone hydrogenation

A series of Pd and Pd‐Ga bimetallic catalysts were prepared by a co‐impregnation method for 2‐ethylanthraquinone (EAQ) hydrogenation to produce hydrogen peroxide. Compared with 0.6Pd catalyst, the hydrogenation efficiency of 0.6Pd1.2Ga catalyst (11.9 g L^?1) increases by 32.2%, and the stability of 0.6Pd1.2Ga catalyst is also higher than that of 0.6Pd catalyst. The structures of the samples were determined by N₂ adsorption–desorption, ICP, XRD, CO chemisorption, TEM, H₂‐TPR, in situ CO‐DRIFTS and XPS. The results suggest that incorporation of Ga species improves Pd dispersion and generates a strong interaction between Ga₂O₃ and Pd interface or between Pd and support. DFT calculation results indicate that the strong adsorption of carbonyl group on Ga₂O₃/Pd interface facilitates the activation of EAQ and promotes the hydrogenation efficiency.     

Development of magnetic,ferrite supported palladium catalysts for 2,4-dinitrotoluene hydrogenation

Cobalt, copper, and nickel ferrite spinel nanoparticles have been synthesized by using a combination of sonochemical treatment and combustion. The magnetic nanoparticles have been used as supports to prepare ~4 wt% palladium catalysts. The ferrites were dispersed in an ethanolic solution of Pd(II) nitrate by ultrasonication. The palladium ions were reduced to metallic Pd nanoparticles, which were then attached to the surface of the different metal oxide supports. Thus, three different catalysts (Pd/CoFe₂O₄, Pd/CuFe₂O₄, Pd/NiFe₂O₄) were made and tested in the hydrogenation of 2,4-dinitrotoluene (DNT). A possible reaction mechanism, including the detected species, has been envisaged based on the results. The highest 2,4-diaminotoluene (TDA) yield (99 n/n%) has been achieved by using the Pd/NiFe₂O₄ catalyst. Furthermore, the TDA yield was also reasonable (84.2 n/n%) when the Pd/CoFe₂O₄ catalyst was used. In this case, complete and easy recovery of the catalyst from the reaction medium is ensured, as the ferrite support is fully magnetic. Thus, the catalyst is very well suited for applicationy in the hydrogenation of DNT or other aromatic nitro compounds.     

One-pot synthesis of a rose-like Pd–Fe3O4 nanocatalyst for Sonogashira coupling reactions

A one-pot synthesis of rose-like Pd–Fe₃O₄ nanocomposites via the controlled thermal decomposition of Fe(CO)₅ and reduction of Pd(OAc)₂ is reported. This rose-like Pd–Fe₃O₄ composite structure has a high surface area owing to the individual Pd–Fe₃O₄ nanosheets, which imparted a high catalytic activity for Sonogashira coupling reactions. Moreover, the catalyst also demonstrated magnetic recyclability.     

Simple Electrodeposition of Dendritic Pd Without Supporting Electrolyte and Its Electrocatalytic Activity Toward Oxygen Reduction and H2O2 Sensing

Metallic palladium (Pd) electrocatalysts for oxygen reduction and hydrogen peroxide (H₂O₂) oxidation/reduction are prepared via electroplating on a gold metal substrate from dilute (5 to 50 mM) aqueous K₂PdCl₄ solution. The best Pd catalyst layer possessing dendritic nanostructures is formed on the Au substrate surface from 50 mM Pd precursor solution (denoted as Pd‐50) without any additional salt, acid or Pd templating chemical species. The Pd‐50 consisted of nanostructured dendrites of polycrystalline Pd metal and micropores within the dendrites which provide high catalyst surface area and further facilitate reactant mass transport to the catalyst surface. The electrocatalytic activity of Pd‐50 proved to be better than that of a commercial Pt (Pt/C) in terms of lower overpotential for the onset and half‐wave potentials and a greater number of electrons (n) transferred. Furthermore, amperometric i–t curves of Pd‐50 for H₂O₂ electrochemical reaction show high sensitivities (822.2 and ?851.9 µA mM^?1 cm^?2) and low detection limits (1.1 and 7.91 µM) based on H₂O₂ oxidation H₂O₂ reduction, respectively, along with a fast response (<1 s).     

Structural and chemical characterisation of titanium deuteride films covered by nanoscale evaporated palladium layers

Thin titanium deuteride (TiD_y) films, covered by an ultra-thin palladium layer, have been compared with the corresponding titanium and palladium films using a combination of scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The TiD_y layers were prepared under ultra-high vacuum (UHV) conditions by precisely controlled deuterium sorption at 298 K on a Ti film evaporated onto a Si(100) substrate. Both Ti and TiD_y films were then covered in situ by a nanoscale Pd layer. It was found that a 10- to 12-nm-thick Pd layer protects the TiD_y films efficiently against extensive air interaction. The morphology of both the surface and bulk Pd/TiD_y (Ti) films have been observed using SEM and cross-sectional TEM analysis, respectively. A polycrystalline bulk morphology in both Ti and TiD_y films accompanied by a fine-grained Pd surface was observed. High-magnification cross-sectional TEM images reveal the TiD_y film to be plastically deformed leading to an increase in the roughness of the top Pd layer. Complex structures, including Moiré patterns, have been identified within the Pd/TiD_y interface. The chemical nature of this interface has been analysed after partial sputtering of the Pd top layer using XPS. Besides TiD_y and Pd, TiO and PdO were found to be the main chemical species in the interface region of the Pd/TiH_y film. The XPS valence-band spectra of the Pd/TiD_y interface reveal electronic features characteristic of a Pd–Ti bimetallic structure.     

Engineered mesoporous ionic‐modified γ‐Fe2O3@hydroxyapatite decorated with palladium nanoparticles and its catalytic properties in water

A new mesoporous organic–inorganic nanocomposite was formulated and then used as stabilizer and support for the preparation of palladium nanoparticles (Pd NPs). The properties and structure of Pd NPs immobilized on prepared 1,4‐diazabicyclo[2.2.2]octane (DABCO) chemically tagged on mesoporous γ‐Fe₂O₃@hydroxyapatite (ionic modified (IM)‐MHA) were investigated using various techniques. The synergistic effects of the combined properties of MHA, DABCO and Pd NPs, and catalytic activity of γ‐Fe₂O₃@hydroxyapatite‐DABCO‐Pd (IM‐MHA‐Pd) were investigated for the Heck cross‐coupling reaction in aqueous media. The appropriate surface area and pore size of mesoporous IM‐MHA nanocomposite can provide a favourable hard template for immobilization of Pd NPs. The loading level of Pd in the nanocatalyst was 0.51 mmol g^?1. DABCO bonded to the MHA surface acts as a Pd NP stabilizer and can also lead to colloidal stability of the nanocomposite in aqueous solution. The results reveal that IM‐MHA‐Pd is highly efficient for coupling reactions of a wide range of aryl halides with olefins under green conditions. The superparamagnetic nature of the nanocomposite means that the catalyst to be easily separated from solution through magnetic decantation, and the catalytic activity of the recycled IM‐MHA‐Pd showed almost no appreciable loss even after six consecutive runs.     

Reactions of cyclopalladated azobenzenes with xanthates and dithiocarbamates. Spectral characterisation and electrochemical studies of the products

Binuclear chloro-bridged cyclopalladated azobenzenes [Pd(A)Cl]₂ (A = ortho-metallated azobenzene or its derivatives) have been reacted with aqueous AgNO₃ to yield aquo-derivatives followed by the addition of xanthates, or dithiocarbamates (RCS₂ ^–) to synthesise ternary complexes, [Pd(A)(RCS₂)]. These complexes occur as configurational isomers and their compositions have been established by ¹H-n.m.r. spectroscopy. Cyclic voltammetric studies show azo reduction at negative and thiol oxidation at positive potentials relative to s.c.e., respectively. Dissociation of RCS₂ ^– under the electrode field is chemically supported by using a sulfide extractor, HgCl₂, Hg(OAc)₂, or AgOAc, to precipitate out the binuclear [Pd(A)Cl]₂/[Pd(A)(OAc)]₂ complexes.     

Double-coupling of dibromo arenes with aryltriolborates for synthesis of diaryl-substituted planar frameworks

A new method for simple and practical synthesis of diaryl-substituted arenes using potassium aryltriolborates was developed. Double-cross-coupling of dibromo arenes with aryltriolborates was carried out in the presence of a palladium catalyst, such as Pd(OAc)₂, Pd(PPh₃)₄ or Pd(OAc)₂/BIPHEP. The use of CuCl (40 mol %) with a palladium catalyst was found to be highly effective to give diaryl-substituted aromatic compounds in good yields.     

Ligand-directed electrochemical functionalization of C(sp<Superscript>2</Superscript>)—H bonds in the presence of the palladium and nickel compounds

The recent achievements of electrochemical functionalization of C—H bonds in aromatic substrates containing the pyridine moiety and acting as a ligand directing substitution to the ortho-position in the presence of the palladium and nickel compounds are analyzed and generalized in the review. Acetoxylation, perfluoroacetoxylation, perfluoroalkylation, and phosphorylation are considered for 2-phenylpyridine (PhPy) as an example. The Pd^II metallocycles with the Pd-bound acetate, perfluoroacetate, and perfluoroheptanoate substituents were isolated and characterized as possible intermediates: binuclear [(PhPy)Pd(µ-OAc)]₂ and [(PhPy)Pd(µ-TFA)]₂ and mononuclear [(PhPy)Pd(TFA)](MeCN), [(PhPy)Pd(TFA)](PhPy), [(PhPy)Pd(PFH)](PhPy), and [(PhPy)Pd(EtO)₂P(O)]₂. Their electrochemical properties were studied. The fluorinated derivatives are in solvent-dependent equilibrium between the mononuclear and binuclear forms. Cyclic voltammetry was used to establish the redox properties of the palladium cycles and routes of their oxidation to the final products. A new approach to CH-substitution products based on the electrochemical generation of Pd or Ni in high oxidation states in the presence of substrate-ligand was proposed.     

Synthesis, structure, and electroconductivity of new radical cation salt [Pd(dddt)2]2GaBr4

A new radical cation salt based on the dithiolate complex Pd(dddt)₂ (dddt=5,6-dihydro-1,4-dithiine-2,3-dithiolate) with the tetrahedral anion [GaBr₄]^? was synthesized. The crystal and molecular structure was determined by XRD analysis. The crystal structure of the salt contains Pd(dddt)₂ cation layers alternating with layers of [GaBr₄]^? anions along thec axis of the unit cell. The cation layers contain stacks of Pd(dddt)₂, with a Pd...Pd distance of 3.011 Å. The electroconductivity of [Pd(dddt)₂]₂GaBr₄, single crystals at room temperature is 0.25 Ohm^?1 cm^?1 and decreases with temperature decrease, the activation energy beingE _a=0.66 eV.