Development of a novel colorimetric indicator label for monitoring freshness of intermediate-moisture dessert spoilage

A colorimetric mixed pH dye-based indicator with potential for the development of intelligent packaging, as a “chemical barcode” for real-time monitoring of intermediate-moisture dessert spoilage, is described. This on-package indicator contains mixed pH-sensitive dyes, bromothymol blue and methyl red, that respond through visible color change to carbon dioxide (CO₂) as a spoilage metabolite. Both indicator solution and indicator label characteristics were studied, as well as their response to CO₂. A kinetic approach was used to correlate the response of the indicator label to the changes in intermediate-moisture dessert spoilage. Color changes, in terms of total color difference of a mixed pH dye-based indicator, correlated well with CO₂ levels of intermediate-moisture dessert. Trials on golden drop have verified that the indicator response correlates with microbial growth patterns in dessert samples, thus enabling the real-time monitoring of spoilage either at various constant temperatures or with temperature fluctuation.     

Development of a flow-injection analysis (FIA) enzyme sensor for fructosyl amine monitoring

An enzyme-sensor system with flow-injection analysis (FIA) has been developed for the detection of fructosyl amine compounds; the sensor utilizes fructosyl amine oxidase isolated from the marine yeast Pichia sp. N1-1 strain. With this FIA system 0.2 to 10 mmol L(-1) fructosyl valine can be determined. The sensor is approximately five times more sensitive to fructosyl valine, a model compound for glycated hemoglobin HbA1c, than to N(epsilon)-fructosyl lysine, a model compound for glycated albumin. This FIA system can also be used to detect fructosyl dipeptides. The operational stability of the sensor enabled more than 120 consecutive sample injections over a period of approximately 20 h.     

Construction of ceo2/rgo/gce electrochemical sensor for the determination of histamine in fishEI北大核心CSCD

By preparing nano-CeO2 (CeO2) and reduced graphene oxide (RGO), an electrochemical sensor based on CeO2/RGO composite was constructed for the detection of histamine. The morphology and structure of the composites were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The electrochemical behavior of histamine on the sensor was studied by cyclic voltammetry (CV), and the conditions such as the type proportion and addition amount of the composite scanning rate and buffer pH were optimized. The results showed that the optimal conditions were as follows: The mass ratio was m(CeO2): M(RGO)=1: 0.25, the addition amount of composite material was 10 μL, the scanning rate was 300 mV/s and the pH of buffer solution was 8. A good linear relationship was observed between the peak current and the concentration of histamine in the range of 0.25–100 mg/L with the detection limit of 0.16 mg/L. The CeO2/RGO/GCE electrochemical sensor has been applied to the determination of histamine in fish samples with the spiked recoveries of 98.4% −104%. The method can be used to determine histamine content in fish products. © 2023, Youke Publishing Co.,Ltd. All rights reserved.     

Evaluation of capillary gas chromatography columns for the determination of free volatile amines after solid-phase microextraction

Summary Gas-liquid chromatographic capillary columns coated with 14% diphenyldimethylpolysiloxane, base-deactivated 5% diphenyldimethylpolysiloxane, or poly(ethylene glycol), and deactivated porous polymer for capillary gas-solid chromatography were evaluated for analysis of low-molecular-weight (C₁−C₉) amines. Solid-phase microextraction with a polydimethylsiloxane fiber was used for headspace sampling and for introduction of the sample into the gas chromatograph. As expected, basic of aliphatic gaseous or volatile aliphatic amines (carbon number: C₁−C₄). A thick (e. g. 3 μm) film of 5% diphenyldimethylpolysiloxane enabled determination of analytes in a wider molecular-weight range (C₃−C₉) with acceptable efficiency and resolution.     

Quartz crystal microbalance sensor array for the detection of volatile organic compounds

A sensor array system consisting of five quartz crystal microbalance (QCM) sensors (four for measuring and one for reference) and an artificial neural network (ANN) method is presented for on-line detection of volatile organic compounds. Three ionic liquids, 1-butyl-3-methylimidazolium chloride (C₄mimCl), 1-butyl-3-methylimidazolium hexafluorophosphate (C₄mimPF₆), 1-dedocyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (C₄mimNTf₂), and silicone oil II, which is widely used as gas chromatographic stationary phase, have been selected as sensitive coatings on the quartz surface allowing the sensor array effective to identify chemical vapors, such as toluene, ethanol, acetone and dichloromethane. The success rate for the qualitative recognition reached 100%. Quantitative analysis has also been investigated, within the concentration range of 0.6-6.1 mg/L for toluene, 0.9-7.5 mg/L for ethanol, 2.8-117 mg/L for dichloromethane, and 0.7-38 mg/L for acetone, with a prediction error lower than 8%.     

Continuous monitoring for cyanide in waste water with a galvanic hydrogen cyanide sensor using a purge system

A continuous monitoring system for cyanide with a galvanic hydrogen cyanide sensor and an aeration pump for purging was developed. Hydrogen cyanide evolved from cyanide solution using a purging pump was measured with the hydrogen cyanide sensor. The system showed good performance in terms of stability and selectivity. A linear calibration curve was obtained in the concentrating range from 0 to 15 mg dm³ of cyanide ion with a slope of −0.24 μA mg⁻¹ dm⁻³. The lower detection limit was 0.1 mg dm⁻³. The 90% response time of the sensor system was within 3.5 min for a 0.5 mg dm⁻³ cyanide solution, when the flow rate of the purging air was 1 dm³ min⁻¹. The system maintained the initial performance for 6 months in the field test. The developed galvanic sensor system was not subject to interference from sulfide and residual chlorine, compared with a potentiometric sensor system developed previously. The analytical results obtained by the present system were in good agreement with those obtained by the pyridine pyrazolone method. The correlation factor and regression line between both methods were 0.979 and Y=2.30×10⁻⁴+1.12X, respectively. This system was successfully applied for a continuous monitoring of cyanide ion in waste water.     

A new multiresponse optimization approach in combination with a D-Optimal experimental design for the determination of biogenic amines in fish by HPLC-FLD

A new strategy to approach multiresponse optimization in conjunction to a D-optimal design for simultaneously optimizing a large number of experimental factors is proposed. The procedure is applied to the determination of biogenic amines (histamine, putrescine, cadaverine, tyramine, tryptamine, 2-phenylethylamine, spermine and spermidine) in swordfish by HPLC-FLD after extraction with an acid and subsequent derivatization with dansyl chloride. Firstly, the extraction from a solid matrix and the derivatization of the extract are optimized. Ten experimental factors involved in both stages are studied, seven of them at two levels and the remaining at three levels; the use of a D-optimal design leads to optimize the ten experimental variables, significantly reducing by a factor of 67 the experimental effort needed but guaranteeing the quality of the estimates. A model with 19 coefficients, which includes those corresponding to the main effects and two possible interactions, is fitted to the peak area of each amine. Then, the validated models are used to predict the response (peak area) of the 3456 experiments of the complete factorial design. The variability among peak areas ranges from 13.5 for 2-phenylethylamine to 122.5 for spermine, which shows, to a certain extent, the high and different effect of the pretreatment on the responses. Then the percentiles are calculated from the peak areas of each amine. As the experimental conditions are in conflict, the optimal solution for the multiresponse optimization is chosen from among those which have all the responses greater than a certain percentile for all the amines. The developed procedure reaches decision limits down to 2.5 μg L⁻¹ for cadaverine or 497 μg L⁻¹ for histamine in solvent and 0.07 mg kg⁻¹ and 14.81 mg kg⁻¹ in fish (probability of false positive equal to 0.05), respectively.     

Instrument for generation of volatile organic compounds for the development of chemical sensors and evaluation of tube-type diffusive sampling

An automatic calibration apparatus for the dynamic generation of organic vapours was developed. The accurately controlled stream of nitrogen was drawn at a low flow-rate through a thermostated container filled with the standard substance, thus generating a continuous stream of saturated vapour of the compound. The compound holder vessel was thermostated at −16°C. A large stream of pure carrier gas was mixed with a low stream of substance in a mixing chamber for dilution. The fittings were manufactured from PTFE, and tubes were made of special PTFE with an inert inner surface to eliminate the wall adsorption and to decrease the cross-diffusion. Moisture interferences were reduced using a Nafion membrane filter. The vapour generator was validated by diffusive sampling and gas chromatographic methods. Standard mixtures have been prepared containing toluene at concentrations ranging from 3 to 3000 ppm. The combined uncertainty of preparative and analytical error components associated with the concentration of the analytes at the 95% confidence level typically ranges from 2 to 5% relative, depending upon the concentration. The measured and the calculated values were compared and good correlation (r²>0.99) was found.     

Development of an amine dehydrogenase for synthesis of chiral amines

A leucine dehydrogenase has been successfully altered through several rounds of protein engineering to an enantioselective amine dehydrogenase. Instead of the wild-type α-keto acid, the new amine dehydrogenase now accepts the analogous ketone, methyl isobutyl ketone (MIBK), which corresponds to exchange of the carboxy group by a methyl group to produce chiral (R)-1,3-dimethylbutylamine.     

Development of a LC-MS/MS method for the analysis of volatile primary and secondary amines as NIT (naphthylisothiocyanate) derivatives

High-performance liquid chromatography with mass spectrometric detection was used for the structure elucidation of eighteen primary and secondary amines and ammonia derivatised with naphthylisothiocyanate (NIT). A fragmentation scheme was established using reference compounds and the scheme was applied to real air samples from a tyre repair shop and from the air above a bacterial culture. The sampling was performed using a solid sorbent, XAD-2, impregnated with NIT, and the derivatives were extracted with acetonitrile and analysed with LC-MS/MS. A three-step process was developed for screening and identifying of volatile amines. The first step, selected reaction monitoring; SRM was applied in order to screen the samples for NIT derivatives. In the second step, a precursor ion scan gave the [M+H]⁺ ion, and in the third step a product ion scan gave the fragments needed for identification. The detection limits varied between 0.12 and 0.25 ng L^–1 when screening for unknown derivatised amines. It was possible to separate and identify all the amines with the structural information obtained and the method proved to be general, sensitive and well suited for sampling and analysis of complex environmental samples.     

Dual-response colorimetric sensor array for the identification of amines in water based on supramolecular host-guest complexation

Amines have been found as a challenging compound class in previous works on chemical tongues. Herein, we describe the successful application of libraries based on host-guest inclusion complexes in cyclodextrins (CDs) and cucurbiturils (CBs) for the discrimination of primary, secondary, tertiary, aliphatic and aromatic as well as linear and branched amines in water. Besides the clear need for new detection, identification and quantification techniques of organic compounds in water, the main advantage of our approach is that an array made by combining six simple basic dyes with seven commercial organic capsules allows a perfect discrimination among 14 amines (see list in Table S1 in Supplementary data) with only very subtle structural differences.     

佩兰挥发性化学成分的固相微萃取研究

采用固相微萃取-气相色谱-质谱法分析佩兰中挥发性化学成分,共分离出84个组分,并鉴定了67个组分,用归一化法测定其质量分数,占总挥发性组分峰面积的98.05%。主要成分是对-伞花烃(5.19%)、芳樟醇(3.72%)、β-石竹烯(12.35%)、α-律草烯(13.39%)、α-姜黄烯(2.11%)、(-)-石竹烯氧化物(8.25%)、. /-.-4-乙酰基-1-甲基环己烯(8.91%)。     

Development of a stir bar sorptive extraction method for the determination of volatile compounds in orange juices

A stir bar sorptive extraction method for the determination of volatile compounds in orange juices was developed. The extraction variables were optimized using a reduced two‐level factorial screening design (2^5‐1), and the most suitable analytical conditions for the extraction of the studied compounds were: sample volume 10 mL, extraction time 60 min, stirring speed 1800 rpm, NaCl amount 30% (weight/volume), and twister length 10 mm. The optimized method was further validated, obtaining good linearity and detection and quantification limits low enough to correctly determine the studied compounds. As well, for most of the studied compounds precision and recovery values were good. Several orange juice samples (squeezed and commercial) were extracted following the optimized extraction method and analyzed by gas chromatography coupled to mass spectrometry detection. The method has proven to be suitable for the determination of the aroma of orange juice, of which limonene was the major volatile compound in all the studied samples.     

Development of a new open-tubular capillary electrochromatography method for in vitro monitoring of toxic aromatic amines distribution in rat blood

Exposure to aromatic amines from different industrial and agricultural activities entails a substantial risk of deleterious somatic effects, genetic damage and cancer development. Thus, a new and simple method for separation and analysis of aromatic amines has been developed by open-tubular capillary electrochromatography with a novel amphipathic block copolymer (poly(tert-butyl acrylate)(127)-block-poly(glycidyl methacrylate)(86)) coating based on its self-assembled property. Key factors affecting the separation efficiency of the test analytes, such as pH, buffer concentration and selective solvent, were studied in detail. Meanwhile, method validation was well evaluated by linearity (≥0.998), detection limit and recovery. Application of this developed protocol on in vitro monitoring of the target aromatic amines distribution in rat blood demonstrated its potential usage for separation and determination of aromatic amines in biological samples. Additionally, for assimilating more polymeric materials into analysis of aromatic amines, the effect of morphology changes of the amphipathic block copolymer coating on open-tubular capillary electrochromatography separation was also studied, and the result revealed that the block copolymer coating could play the same role as surfactant.     

Development and validation of a solid-phase microextraction method for the analysis of volatile organic compounds in groundwater samples

Summary Solid-phase microextraction is a relatively recent extraction technique for sample preparation. It has been used successfully to analyse environmental pollutants in a variety of matrices such as soils, water and air. In this work, a simple and rapid method for the analysis of volatile organic and polar compounds from polluted groundwater samples by SPME coupled with gas chromatography (GC) is described. Different types of fibres were studied and the extraction process was optimised. The fibre that proved to be the best to analyse this kind of samples was CAR-PDMS. The method was validated by analysis of synthetic samples and comparison with headspace—GC. The optimised method was successfully applied to the analysis of ground-water samples.     

Development of a headspace solid phase microextraction-gas chromatography method for monitoring volatile compounds in extended time-course experiments of olive oil

A novel method for monitoring fibre performance and death, based on a Shewhart control plot, for use in headspace analysis by solid phase microextraction-gas chromatography (SPME-GC) is presented. The method is also demonstrated to be effective in standardising fibre response in extended time-course experiments, where several fibres may be required to complete a lengthy study. Extraction conditions that gave good total recovery and diversity of compounds, from olive oil headspace were found to be: 1 g oil sample in 10 mL vessel; exposure of DVB-CAR-PDMS, 50/30 μm fibre for 30 min at 40 °C; and desorption for 3 min at 250 °C. Calibration curves were constructed for 25 compounds commonly reported in olive oil headspace; with coefficients of determination (R²) ranging from 0.959 to 0.994 and limits of detection (LOD) from 0.01 to 0.59 μg/g. The method was applied to monitor the change in concentration of select C6 volatile compounds, which have implications in sensory quality - E-2-hexenal, hexanal, E-2-hexen-1-ol, hexanol - over a period of 12 months storage.     

Development of a static headspace gas chromatographic/mass spectrometric method to analyze the level of volatile contaminants biodegradation

Volatile compound biodegradation analysis usually requires the time-consuming step of extraction of the analytes from the matrix using organic solvents or costly radioactive-compounds. Thus, it is desirable to have a simple and fast technique to generate a good evaluation of bacterial biodegradation. The goal of this research was to develop a methodology on the basis of static headspace-gas chromatography/mass spectrometry (HS-GC/MS) to evaluate the level of volatile contaminant biodegradation. The effects of the following parameters were studied: temperature and time of equilibration. The biodegradation experiments were carried out with bacteria inoculation in mineral media in presence of volatile hydrocarbon compounds (toluene, p-xylene, nonane and naphthalene). Autoclaved inoculates were used as control and reference sample. The optimal headspace conditions were observed when the vials were heated at 80 degrees C for 20 min, the syringe at 81 degrees C and an injection volume of 0.4 mL was used. This methodology has the advantage of being relative free from matrix effects.     

Rapid measurement of fish freshness indices by an amperometric flow-injection system with a 16-way switching valve and immobilized enzyme reactors

A novel flow-injection system is proposed for the rapid measurement of the fish freshness indices K₁ and K₂: K₁=[([HxR+[Hx])×100/([IMP]+[HxR]+[Hx])] and K₂=[[Hx]×100/([HxR]+[Hx])], where [IMP], [HxR] and [Hx] are inosine-5′-monophosphate, inosine and hypoxanthine concentrations, respectively. For the estimation of index K₁, 5′-nucleotidase immobilized reactor and nucleoside phosphorylase (NP)/xanthine oxidase (XO) coimmobilized reactor were incorporated in series in the flow-injection line made up by a 16-way switching valve with two sample loops. For the estimation of index K₂, NP and XO immobilized reactors were also incorporated in the similar flow-line. Two sample portions passed through the flow-line with different residence times so that two peaks were obtained. The first and second peaks obtained in the K₁-determining system corresponded to the total of HxR and Hx and the total of Hx, HxR and IMP, respectively. Similarly, the first and second peaks obtained in the K₂-determining system corresponded to Hx and the total of Hx and HxR, respectively. Therefore, the indices K₁ and K₂ can be estimated by

where i₁ and i₂ present the peak current of the first and second peaks, respectively, and f the ratio of the peak currents of the first and second peaks for a Hx standard solution. A sea bream was selected as a model fish and it was stored at 4 °C after death. A good correlation was found between the index K₁ and the storage time over a period of 400 h, with a correlation coefficient of 0.992, but no correlation between the index K₂ and the storage time. The measurements could be performed at a rate of 22 samples per hour with satisfactory precision (0.6–1.2% R.S.D.), without calibration for each species, accurate weighing of fish meat and any interferences in fish meat.     

Sorbent-based sampling methods for volatile and semi-volatile organic compounds in air. Part 2. Sorbent selection and other aspects of optimizing air monitoring methods

Sorbent tubes/traps are widely used in combination with gas chromatographic (GC) analytical methods to monitor the vapour-phase fraction of organic compounds in air. Applications range from atmospheric research and ambient air monitoring (indoor and outdoor) to occupational hygiene (personal exposure assessment) and measuring chemical emission levels. Part 1 of this paper reviewed the main sorbent-based air sampling strategies including active (pumped) tube monitoring, diffusive (passive) sampling onto sorbent tubes/cartridges plus sorbent trapping/focusing of whole air samples that are either collected in containers (such as canisters or bags) or monitored online. Options for subsequent extraction and transfer to GC(MS) analysis were also summarised and the trend to thermal desorption (TD)-based methods and away from solvent extraction was explained. As a result of this trend, demand for TD-compatible sorbents (alternatives to traditional charcoal) is growing. Part 2 of this paper therefore continues with a summary of TD-compatible sorbents, their respective advantages and limitations and considerations for sorbent selection. Other analytical considerations for optimizing sorbent-based air monitoring methods are also discussed together with recent technical developments and sampling accessories which have extended the application range of sorbent trapping technology generally.     

A piezoelectric quartz crystal sensor array self assembled calixarene bilayers for detection of volatile organic amine in gas

P-tert-butylcalix[n]arenes (n=4, 6, 8, abbreviated as CA[4], CA[6], CA[8], respectively) were immobilized on the Au surface of the piezoelectric quartz crystal by the reaction between CA[n] and the acid chloride terminated mercaptoacetic acid (MAA) self assembled monolayers to form MAA/CA[n] bilayers. The sensing films were not only immobilized easily and reproducibly, but also used to improve the reversibility of the sensor signal. The response characteristics show the response of CA to organic amine attributes to specific interaction between CA[n] (host) and organic amines (guest). The frequency shifts of n-butylamine and iso-butylamine are much larger than tert-butylamine and diethylamine because of shape-selection and hydrogen bonding. Compared to CA[6] and CA[4], CA[8] has highest sensitivity to organic amine due to having more flexibility to accommodate guest molecules. A sensor array with three-layer back-propagation neural network was applied to detect the binary mixture of n-butylamine in the range of 7.14–142 μl l⁻¹ and iso-butylamine in the range of 7.14–57 μl l⁻¹. The optimum values of learning rate (0.15) and momentum term (0.8) were determined by experiment. The best epoch of training was 1098. The root mean square error of prediction was 1.69 (μl l⁻¹) for n-butylamine, and 1.42 (μl l⁻¹) for iso-butylamine.