Study on the phosphorescence characterizations of palmatine chloride on the solid substrate and its interaction with ctDNA

The spectroscopic characterizations of solid substrate room temperature phosphorescence (SS-RTP) of palmatine (Pal) have been studied. Strong RTP signal at 615 nm can be induced on filter paper in the presence of TIAc. The interaction between calf thymus DNA (ctDNA) and Pal has been investigated at pH 6.90 using fluorescence, UV-vis, SS-RTP and cyclic voltammogram spectroscopy. Strong binding affinity of Pal with DNA is revealed from the absorption and fluorescence studies in the liquid state. With the addition of ctDNA, the fluorescence intensity of Pal is enhanced greatly and UV-vis spectra show no apparent hypochromicity and red shift, which indicates that Pal intercalates into ctDNA bases. However, this conclusion could not explain the phenomena from fluorescence polarization and denatured DNA measurements, which indicate that groove binding is at least the main binding mode. Binding constant and binding site size have been calculated to be 2.57 × 10⁴ L/mol and 0.16 based on Scatchard plot from fluorescence titration data. Groove binding has also been supported by phosphorescence lifetime and anion quenching experiments. Above studies demonstrate that there should exist intercalative binding and groove binding in the interaction of Pal and DNA. Furthermore, cyclic voltammogram study suggests that electrostatic binding exists at the same time exactly. Taken together, the binding model obtained in this study is mixed-mode.     

Interactions of tetrakis(4-N-methylpyridyl)porphyrin with cyclodextrins and disodium phthalate in aqueous solution

In pH 7.3 buffers, the interactions of a cationic porphyrin, tetrakis(4-N-methylpyridyl)porphyrin (TMPyP), with cyclodextrins (CDs) and disodium phthalate (DSP) have been examined by means of absorption, fluorescence, and induced circular dichroism spectroscopy. α-CD, β-CD, and γ-CD form a 1:1 inclusion complex with a TMPyP monomer, which dimerizes in solution without CD. TMPyP also forms a 1:1 organic cation–organic anion complex with DSP. The 1:1 TMPyP–DSP complex forms a ternary CD–TMPyP–DSP inclusion complex with α-, β-, and γ-CD, in which a DSP molecule is not incorporated into the CD cavity. From the fluorescence intensity change, the␣equilibrium constants have been evaluated for the formation of the inclusion complexes and the organic cation–anion complexes.     

Five-membered ring chelate complexes of Ni(II), Pd(II) and Pt(II) derived of di-(2-pyridyl)-N-ethylimine

Cis-diaquobis{di-(2-pyridyl)-N-ethylimine}nickel(II) chloride (2) was obtained from the reaction of di-(2-pyridyl)-N-ethylimine (1) and [NiCl₂dppe] [dppe = cis-1,2-bis(diphenylphosphino)ethylene] in a 2:1 ratio in hot acetonitrile. Cis-dichloro{di-(2-pyridyl)-N-ethylimine}palladium(II) (3) and cis-dichloro{di-(2-pyridyl)-N-ethylimine}platinum(II) (4) complexes were obtained from the reaction of MCl₂ (M = Pd, Pt) and (1) in equimolar ratio in hot acetonitrile. Compounds 1–4 were characterized by IR spectroscopy, elemental analysis, and mass spectrometry; the complexes 3 and 4 were characterized in solution by NMR. In addition, solid state structures of compounds 1–4 were determined using single crystal X-ray diffraction analyses. X-ray diffraction data of the complexes 3 and 4 showed a distorted square planar local geometry at palladium and platinum atoms with the chlorine atoms in a cis-coordination; in 2 a local octahedral geometry at nickel atom was observed. Complexes 3 and 4 are arranged as dimers with a M?M distance of 3.4567(4) Å (M = Pd) and 3.4221(4) Å (M = Pt), respectively; 2 consists of units linked by intermolecular hydrogen bonding.     

Syntheses of aryl- and arylethynyl-substituted N-confused porphyrins

Palladium-catalyzed cross-coupling reactions under Suzuki, Sonogashira, and Stille conditions afford 3-aryl (9-12) and 3-arylethynyl N-confused porphyrin (NCP) silver(III) complexes (13-15) from the 3-bromo NCP complex (4) in ca. 70% yields along with the transmetalated products, 3-substituted NCP palladium(II) complexes (11-Pd to 15-Pd), in 10-30% yields. Substitution at 3-position was confirmed by the single crystal X-ray structures of 9, 13-Ag, and 13-Pd. The arylethynyl groups or five-membered heterocyclic aromatic rings at 3-position largely affected the optical properties of N-confused porphyrin, in which the longest absorption maxima of the Q-bands are shifted bathochromically by 30-120 nm. The electronic effect of substituent differs largely between palladium and silver complexes reflecting the different π-electron delocalization pathway of NCP cores. 3-Aryl- and 3-arylethynyl NCP silver(III) complexes were easily demetalated to afford the corresponding free base porphyrins by the treatment of sodium borohydride.     

Studies on interaction of porphyrin and its complexes with DNA at interface on gold electrode modified by thiol-porphyrin self-assembled monolayer

The interaction of 5-[p-(mercaptopropyloxy)-phenyl]-10, 15, 20-triphenylporphyrin (H₂MPTPP) and its metalloporphyrin (Co, Ni-MPTPP) with calf thymus deoxyribonucleic acid (DNA) has been studied on gold electrode modified by thiol-porphyrin self-assembled monolayer (SAM). The mode and characteristics of their interaction with DNA have been studied by cyclic voltammetry, scanning electrochemical microscope (SECM), and alternating current (AC) impedance. Some electrochemical parameters have been determined, i.e., apparent heterogeneous reaction rate constant (k _eff from SECM and k _f from AC impedance) and the hindrance (B) of electrode. K₃[Fe(CN)₆] was used as probe to obtain some electrochemical information of electrode interface. SECM images obtained from interface on SAM interacted with DNA showed very good resolution with different topography. Based on a comparison with the results from experiments, a reasonable agreement between SECM and AC impedance can be obtained, which means a conjunction of them. It is proposed to be electrostatic interaction of H₂MPTPP, Co-MPTPP and Ni-MPTPP with DNA, and the attractive force between porphyrins and DNA follows the order Ni-MPTPP > Co-MPTPP > H₂MPTPP.     

A comparative study on the interaction with calf thymus DNA of a Ni(II) complex of the anticancer drug adriamycin and a Ni(II) complex of sodium 1,4-dihydroxy-9,10-anthraquinone-2-sulphonate

The anthracycline drug adriamycin and its metal complexes are efficient in treating several forms of human cancers with recognized antineoplastic activity attributed to strong interactions with DNA within the target cells. The hydroxy-9,10-anthraquinone unit present in the molecule controls and regulates drug action. Metal ions when linked to adriamycin help to reduce the generation of radicals responsible for toxic side effects. A complex of adriamycin with Ni(II) was prepared and its physicochemical characteristics and DNA-binding ability were compared to a Ni(II) complex of sodium-1,4-dihydroxy-9,10-anthraquinone-2-sulphonate (NaLH₂), an analog of adriamycin. Interactions with calf thymus DNA of both complexes were studied by UV-Vis and fluorescence spectroscopy. Binding parameters determined for both complexes agree with each other. Binding of the Ni(II)-adriamycin complex to DNA was five to eight times stronger than for the Ni(II) complex of the hydroxy-9,10-anthraquinone analog, Na₂[Ni(NaLH)₂Cl₂]?·?2H₂O, i.e., Ni(NaLH)₂. The difference in binding was attributed to the presence of sugar units in adriamycin and to its absence in NaLH₂. Although the Ni(II) complex of the hydroxy-9,10-anthraquinone analog of adriamycin [Ni(NaLH)₂] was slightly weaker in binding DNA than the drug and its Ni(II) complex, a much lower cost of the former justifies its consideration as a substitute for the anthracycline drugs that are now in use.     

Pd(0) or Pd(II)-catalyzed ring-opening reactions of benzylidene- and alkylidenecyclopropyl ketones and aldehydes

Pd(0) catalyzed reactions of methylenecyclopropyl carbonyl compounds afforded a convenient method for the synthesis of conjugate (E,E)-1,3-diene derivatives 2 in good to excellent yields. Moreover, we also found that Pd(II)-catalyzed reactions of methylenecyclopropyl carbonyl compounds with water gave 1,5-diketones in good to high yields via a carbene-palladium intermediate. The plausible reaction mechanisms have also been provided on the basis of control and ¹⁸O-labeling experiments.     

Palladium-catalyzed meso-amination and amidation of porphyrins: marked acceleration with the Ni(II) central metal ion

The preparation of meso-amino and meso-amido substituted porphyrins was easily accomplished by palladium-mediated cross-coupling reactions of meso-brominated porphyrins with amines and amides. Ni(II) introduced as a central metal ion into the substrate porphyrin markedly accelerated the cross-coupling.     

Synthesis, structural, spectroscopic and reactivity properties of a new N-2,3,4-trifluorophenyl-3,5-di-tert-butylsalicylaldimine ligand and its Cu(II) and Pd(II) complexes

A new N-2,3,4-trifluorophenyl-3,5-di-tert-butylsalicylaldimine (1) complexes with Cu(II) (2) and Pd(II) (3) have been synthesized and characterized by X-ray crystallography, UV-Vis, IR, ¹H NMR and EPR spectroscopic techniques. The X-ray crystal structure of complex 2 reveals tetrahedrally distorted square-planar coordination geometry around Cu(II). The UV/Vis and EPR results indicate that the solid state geometry of 2 remains unchanged in solutions. Chemical oxidation of 3 with Ce(IV) in CHCl₃ generates relatively stable Pd(II)-phenoxyl radical complex (g = 2.0073). The results related with the chemical oxidation of 2 and 3 as well as the catalytic activity of 3 in the hydrogenation of PhNO₂ are presented.     

Syntheses and structures of zinc and tin(II) compounds with hemilabile N-silyl-tert-butylamido and N-silyl-p-tolylamido ligands that contain pendent tert-butoxy groups

Syntheses and solid-state structures of zinc and tin(II) compounds, containing the N-silyl-amide ligands (O^tBu)(NR)SiMe₂, R = ^tBu (L^tBu), or R = p-tolyl (L^pTol), are reported. The N-silyl amines were synthesized by modified published procedures from commercially available Me₂SiCl₂, ^tBuOH, and ^tBuNH₂, or p-Me-C₆H₄NH₂, respectively. Treatment of SnCl₂ with LiL^pTol furnished Sn(L^pTol)₂, which was X-ray structurally characterized and shown to contain two covalent Sn-N bonds and two asymmetrical O → Sn donor bonds. The single-crystal X-ray structure of Sn(L^tBu)₂ revealed a much more symmetrically-coordinated, pseudo-trigonal-bipyramidal tin atom. Aminolysis of diethylzinc with HL^pTol produced [EtZn(L^pTol)]₂, which crystallized as a centrosymmetric dimer, containing four-coordinate zinc atoms connected by bridging amides. Zinc dichloride, by contrast, reacted with two equivalents of LiL^tBu to produce the homoleptic, pseudo-spirocyclic Zn(L^tBu)₂.     

Study on interaction between Tb(III) and poly(N-isopropylacrylamide)

A new kind of the thermo-sensitive and fluorescent complex of poly(N-isopropylacrylamide) (PNIPAM) and Tb(III) was synthesized by free radical polymerization, in which PNIPAM was used as a polymer ligand. The complex was characterized by using X-ray photoelectron spectroscopy (XPS), ultraviolet-visual (UV), Fourier transform infrared (FT-IR) and fluorescence spectroscopy. The results from the experiments indicated that there is a strong interaction between PNIPAM and Tb(III), leading to a decrease in the electron density of nitrogen and oxygen atoms and an increase in the electron density of Tb(III) in the PNIPAM containing Tb(III) by contrast with PNIPAM and Tb(III), respectively, meanwhile, exhibiting that the Tb(III) is mainly bonded to oxygen atoms in the polymer chain of PNIPAM and formed the complex of PNIPAM-Tb(III). After forming the PNIPAM-Tb(III) complex, the emission fluorescence intensity of Tb(III) in the PNIPAM-Tb(III) complex is significantly enhanced because the effective intramolecular energy transfer from PNIPAM to Tb(III). Especially, the emission intensity of the fluorescence peak at 547 nm can be increased as high as 145 times comparing with that of the pure Tb(III). The intramolecular energy transfer efficiency for fluorescence peak at 547 nm can reach as high as 68%. The fluorescence intensity is related the weight ratio of Tb(III) and PNIPAM in the PNIPAM-Tb(III) complex. When the weight ratio is 1.4%, the maximum fluorescence enhancement can be obtained. Nevertheless, the lower critical solution temperature of PNIPAM containing a low content of Tb(III) has not obviously changed after the formation of the complex of PNIPAM-Tb(III) by the interaction between PNIPAM and Tb(III). This novel thermosensitive and fluorescence characterization of the PNIPAM-Tb(III) complex may be useful in the fluorescence systems and the biomedical field.     

Study on interaction between Tb(III) and poly(N-isopropylacrylamide)-g-poly(N-isopropylacrylamide-co-styrene) core-shell nanoparticles

Based on the synthesis of poly(N-isopropylacrylamide-co-styrene) P(NIPAM-co-St) and poly(N-isopropylacrylamide) (PNIPAM) grafted P(NIPAM-co-St) core-shell nanoparticle, a new kind of thermoresponsive and fluorescent complex of Tb(III) and PNIPAM-g-P(NIPAM-co-St) (PNNS) was successfully prepared. The PNNS-Tb(III) complex was characterized with the different techniques. It was found that when PNNS with the core-shell structure interact with Tb(III), Tb(III) mainly bonded to O of the carbonyl groups of PNNS, forming the novel PNNS-Tb(III) complex. After forming the complex, the emission fluorescence intensity of Tb(III) in the complex is significantly enhanced. Especially, the maximum emission intensity of the PNNS-Tb(III) complex at 545 nm is enhanced about 223 times comparing to that of the pure Tb(III) because the effective intramolecular energy transfer from PNNS to Tb(III). The intramolecular energy transfer efficiency from PNNS to Tb(III) reaches 50%. The fluorescence intensity is related the weight ratio of Tb(III) and PNNS in the PNNS-Tb(III) complex. When the weight ratio of Tb(III) and the PNNS is 12 wt%, the enhancement of the emission fluorescence intensity at 545 nm is highest. This novel fluorescence characterization of the PNNS-Tb(III) complex may be useful in the fluorescence systems and the biomedical field.     

Complexes derived from the copper(II)/succinamic acid/N,N′,N″-chelate tertiary reaction systems: Synthesis,structural and spectroscopic studies

The use of succinamic acid (H₂sucm) in Cu^II/N,N′,N″-donor [2,2′:6′,2″-terpyridine (terpy), 2,6-bis(3,5-dimethylpyrazol-1-yl)pyridine (dmbppy)] reaction mixtures yielded compounds [Cu(Hsucm)(terpy)]_n(ClO₄)_n (1), [Cu(Hsucm)(terpy)(MeOH)](ClO₄) (2), [Cu₂(Hsucm)₂(terpy)₂](ClO₄)₂ (3), [Cu(ClO₄)₂(terpy)(MeOH)] (4), [Cu(Hsucm)(dmbppy)]_n(NO₃)_n·3nH₂O (5^.3nH₂O), and [CuCl₂(dmbppy)]·H₂O (6·H₂O). The succinamate(−1) ligand exists in four different coordination modes in the structures of 1–3 and 5, i.e., the μ₂-κO:κO′:κO″ in 1 and 5 which involves asymmetric chelating coordination of the carboxylato group and ligation of the amide O-atom leading to 1D coordination polymers, the μ₂-κ²O:κO′ in 3 which involves asymmetric chelating and bridging coordination of the carboxylato group, and the asymmetric chelating mode in 2. The primary amide group, either coordinated in 1 and 5, or uncoordinated in 2 and 3, participate in hydrogen bonding interactions, leading to interesting crystal structures. Characteristic IR bands of the complexes are discussed in terms of the known structures and the coordination modes of the Hsucm⁻ ligands. The thermal decomposition of complex 5·3nH₂O was monitored by TG/DTG and DTA measurements.     

Study on the supramolecular system of meso-tetrakis (4-sulfonatophenyl) porphyrin and cyclodextrins by spectroscopy

The ability of beta-cyclodextrin (beta-CD), sulfurbutylether-beta-CD (SBE-beta-CD) and hydroxypropyl-beta-CD (HP-beta-CD) to break the aggregate of the meso-Tetrakis (4-sulfonatophenyl) porphyrin (TPPS4) and to form 2:1 inclusion complexes has been studied by adsorption and fluorescence spectroscopy. The formation constants are calculated, respectively by fluoremetry, from which the inclusion capacity of different CDs is compared and the inclusion mechanism of charged-beta-CD (SBE-beta-CD) is quite different from that of parent beta-CD. At lower pH, the complexation between HP-beta-CD and H2TPPS(2+)4 (the form of the diprotonated TPPS4) hampers the continuous protonation of the pyrrole nitrogen of TPPS4 and the hydrophobic cavity may prefer to bind an apolar neutral porphyrin molecule. 1HNMR data support the inclusion conformation of the porphyrin-cyclodextrin supramolecular system, indicating the interaction of meso-phenyl groups of TPPS4 with the cavity of CDs. For this host-guest inclusion model, cyclodextrin, being regarded as the protein component, which acts as a carrier enveloping the active site of heme prosthetic group within its hydrophobic environment, provides a protective sheath for porphyrin, creating artificial analogues of heme-containing proteins. However, the TPPS4, encapsulated within this saccharide-coated barrier, its physico-chemical, photophysical and photochemical properties changed strongly.     

Studies on the effects of metal ions and counter anions on the aggregate behaviors of meso-tetrakis(p-sulfonatophenyl)porphyrin by absorption and fluorescence spectroscopy

The aggregation behaviors of meso-tetrakis(p-sulfonatophenyl)porphyrin (TPPS) in the function of metal ions and their counter anions (Cl(-), SO(4)(2-), and NO(3)(-)) were investigated by absorption, fluorescence spectroscopy and resonance scattering spectrum. It was shown that the TPPS J-aggregates could be effectively promoted by metal ions under lower ionic strength. Moreover, the prominent effects of counter ions (Cl(-), SO(4)(2-), and NO(3)(-)) on TPPS J- and/or H-aggregate formation at higher ionic strength were observed. These results suggested that the counter anions play a significant role in the formation of TPPS J- and/or H-aggregates and their conversion each other. Very interestingly, the absorption spectrum of metal ions investigated except for Co(2+) leaves a WINDOW from ca. 450 to 550nm centered at 490nm in which the absorption of Cu(2+) or Ni(2+) ions per se was very weak. The spectrum window might be really significant in avoiding possible spectrum interferences when porphyrins are chosen as spectrometric reagents for the determination of metal ions based on J-aggregation.     

中位-四(对烷氧苯基 )卟啉 Co2+、Cu2+、Zn2+、Pb2+配合物的合成与表征

Synthesis of fourteen new complexes of meso-tetrakis(4-alkoxyphenyl) porphyrins with Co²⁺, Cu²⁺, Zn²⁺, Pb²⁺ were presented in this paper.Meso-tetrakis (4-alkoxyphenyl) porphyrins were prepared by condensation of 4-alkoxybenzaldehydes with pyrrole, then treated with corresponding metallic acetate to produce mentioned complexes, IR, UV, ¹H NMR, MS and elementary analysis were explored to confirm the structures of all theses new complexes.Characteristic spectrometric data of IR, UV, ¹H NMR related to these complexes have been systematically summarized.Ten of the fourteen complexes were found to exhibit liquid crystal properties.     

Synthetic,structural and spectroscopic studies of complexes derived from the copper(II) perchlorate/fumaric acid/N,N′-chelates tertiary reaction systems

The synthetic investigation of the Cu(ClO₄)₂·6H₂O/fumaric acid (H₂fum)/N,N’-chelates (1,10-phen, 2,2′-bpy) tertiary reaction systems has yielded mononuclear, dinuclear and tetranuclear complexes, and three coordination polymers. The chemical and structural identity of the products depends on the solvent, the absence or presence of external hydroxides in the reaction mixtures and the N,N’-donor. Three fumarato(−2) complexes, i.e. compounds [Cu₂(fum)(phen)₄](ClO₄)₂·2H₂O (1·2H₂O), [Cu(fum)(phen)(H₂O)]_n (3) and [Cu₂(fum)(bpy)₂(H₂O)₂]_n(ClO₄)_2n (6), were isolated and structurally characterized, and four non-fumarato complexes, i.e. compounds [Cu₄(μ₃-ΟΗ)₂(μ₂-ΟΗ)₂(phen)₄(H₂O)₂](ClO₄)₄·2H₂O (2·2H₂O), [Cu(ClO₄)(phen) (MeCN)₂(H₂O)](ClO₄) (4), [Cu(ClO₄)(phen)(MeCN)₂]_n(ClO₄)_n (5) and [Cu(ClO₄)₂(bpy)(MeCN)₂] (7), were simultaneously obtained from the reaction systems investigated. The coordination versatility of the fumarato(−2) ligand is reflected to the three different coordination modes observed in 1·2H₂O, 3 and 6; the monodentate bridging μ₂-κO:κO′ mode in 3, the asymmetric chelating bridging μ₂-κO:κO′:κO′′:κO′′′ mode in 1·2H₂O and 3, and the syn,syn bridging μ₄-κO:κO′:κO′′:κO′′′ mode in 6. The crystal structures of the complexes are stabilized by intra- and inter-molecular hydrogen bonding and π–π stacking interactions leading to interesting supramolecular architectures. Characteristic IR bands of the complexes are discussed in terms of the known structures, and the coordination modes of the fum²⁻ ligands.     

Pd(OAc)2/Cu(OTf)2在离子液体BMImPF6中催化苯乙烯二聚反应的研究

在离子液体BMImPF₆中, 用不同的钯催化剂和Lewis酸三氟甲磺酸铜Cu(OTf)₂共催化苯乙烯二聚反应, 发现用Pd(OAc)₂/Cu(OTf)₂作催化剂, Pd/Cu物质的量之比为1～4时, 可高产率高选择性地获得苯乙烯二聚产物1,3-二苯基-1-丁烯. BMImPF₆对催化剂有较好的溶解性, 可固定催化剂体系, 使催化剂有效地与产品分离. 同时, α-甲基苯乙烯的二聚反应表明, 室温下不发生反应, 提高温度有利于反应进行.     

Synthesis,characterization and cytotoxicity of Pt(II), Pd(II), Cu(II) and Zn(II) complexes with 4’‐substituted terpyridine

Eight novel Pt(II), Pd(II), Cu(II) and Zn(II) complexes with 4’‐substituted terpyridine were synthesized and characterized by elemental analysis, UV, IR, NMR, electron paramagnetic resonance, high‐resolution mass spectrometry and molar conductivity measurements. The cytotoxicity of these complexes against HL‐60, BGC‐823, KB and Bel‐7402 cell lines was evaluated by MTT assay. All the complexes displayed cytotoxicity with low IC₅₀ values (<20 μm ) and showed selectivity. Complexes 3 , 5 , 7 and 8 exerted 9‐, 5‐, 12‐ and 7‐fold higher cytotoxicity than cisplatin against Bel‐7402 cell line. The cytotoxicity of complexes 3 , 5 , 6 , 7 and 8 was higher than that of cisplatin against BGC‐823 cell line. Complexes 3 , 7 and 8 showed similar cytotoxicity to cisplatin against KB cell line. Complex 7 exhibited higher cytotoxicity than cisplatin against HL‐60 cell line. Among these complexes, complex 7 demonstrated the highest in vitro cytotoxicity, with IC₅₀ values of 1.62, 3.59, 2.28 and 0.63 μm against HL‐60, BGC‐823, Bel‐7402 and KB cells lines, respectively. The results suggest that the cytotoxicity of these complexes is related to the nature of the terminal group of the ligand, the metal center and the leaving groups. Copyright © 2013 John Wiley & Sons, Ltd.     

Catalytic activity of Mn(III) and Fe(III) complexes of meso-tetra(n-propyl)porphyrin in oxidation of olefins: Meso-alkyl substituent in comparison with the alkenyl and aryl ones

Catalytic activity of Mn(III) and Fe(III) complexes of meso-tetra(n-propyl)porphyrin, MnT(n-Pr)P(X) and FeT(n-Pr)P(X) (X = Cl, SCN, OAc) in oxidation of olefins with tetra-n-butylammonium periodate at room temperature has been studied. The influence of different parameters including the molar ratio of catalyst to imidazole, type of counter ion (X) and oxidative stability of metalloporphyrins on the efficiency of the catalysts was investigated. The results of competitive oxidation of cis- and trans-stilbene suggest the presence of a high-valent Mn-oxo as the predominant oxidant species in equilibrium with a six coordinate complex, MnT(n-Pr)P(ImH)(IO₄) in the case of MnT(n-Pr)P(OAc). An unusual preference for trans-stilbene over cis-stilbene was observed in the reaction catalyzed by FeT(n-Pr)P(OAc). Control reaction indicated a significant cis- to trans-isomerization (81%) in oxidation of cis-stilbene catalyzed by FeT(n-Pr)P(OAc) which may explain the observed unusual cis to trans-stilbene oxide ratio. While oxidation of cyclooctene and styrene led to the exclusive formation of the corresponding epoxides, oxidation of cyclohexene gave 2-cyclohexe-1-ol and cyclohexene oxide as the products. However, the results of this study clearly demonstrate the key role played by the group substituted at the meso positions of metalloporphyrins on their catalytic activity, apart from the electron-donating or electron-withdrawing properties of the substituents.