Nutritional parameters of commercially available milk samples by FTIR and chemometric techniques

A chemometric study on the prediction of the main nutritional aspects of milk has been carried out by using fourier transform infrared spectroscopy (FTIR) attenuated total reflectance (ATR) measurements of commercially available milk samples of different types. Whole, semi and skimmed milks, enriched or not with calcium, vitamins or modified by alteration of lipid or sugar composition were considered. After evaluating different strategies for data acquisition and ATR cleaning between samples, hierarchical cluster analysis (HCA) was carried out for classification of samples in order to choose the calibration set. The prediction capabilities of partial least squares (PLS) data treatment were evaluated in order to obtain information about total fat, total protein, total carbohydrates (CH), calories and calcium. On using the mean square error of cross-validation and prediction as control variables, a critical evaluation were made about the calibration set to be used, the spectral range to be considered and the data treatment (PLS-1 or PLS-2) to be performed. By selecting a calibration set of 33 samples the properties of 48 samples were predicted with relative precision of triplicates of 0.062, 0.040 and 0.039% w/v for total fat, protein and carbohydrates, and 0.66 kcal/100 ml for calories, and 2.1 mg of Ca/100 ml. The mean difference (d_x−y) between predicted and actual values and standard deviation of mean differences (s_x−y), were of 0.06 (0.38), 0.03 (0.18) and −0.15 (0.41), being s_x−y values between brackets, for total fat, proteins and carbohydrates, 0.06 (3.8) kcal/100 ml for calories and −4.5 (9) mg/100 ml for calcium.The sensitivity and selectivity of the methodology developed were evaluated on terms of the net analyte signal. Selectivity factors ranging from 2 to 7.6% have been calculated for the five parameters considered.     

Near-infrared diffuse reflectance spectroscopy and neural networks for measuring nutritional parameters in chocolate samples

A rapid and non-destructive method has been developed for the characterization of chocolate samples based on diffuse reflectance near-infrared Fourier transform spectroscopy (DRIFTS) and artificial neural networks (ANNs). This methodology provides a potentially useful alternative to time-consuming chemical methods of analysis. To assess its utility, 36 chocolate samples purchased from the Spanish market were analyzed for the determination of the main nutritional parameters like carbohydrates, fat, proteins, energetic value and cocoa content.Direct triplicate measurements of each sample were carried out by DRIFTS. Cluster hierarchical analysis was used for selecting calibration and validation data sets, resulting in a calibration set comprised of 19 samples and a validation data set of 17 samples. As it is common the presence of non-linear effect in reflectance spectroscopy, ANNs was chosen for data pretreatment. The root-mean-square error of prediction (RMSEP) values obtained for carbohydrates, fat, energetic value and cocoa were 1.0% (w/w), 1.0% (w/w), 50 kJ (100 g)⁻¹ and 1.4%, respectively. The mean difference (d_x-y) and standard deviation of mean differences (s_x-y) of the carbohydrates, fat, proteins content, energetic value and cocoa content were 0.9 and 2.4% (w/w), 0.2 and 1.0% (w/w), 9.1 and 50 kJ (100 g)⁻¹, and −0.5 and 1.4%, respectively. The maximum relative error for the prediction (QC) of any of these parameters for a new sample did not exceed 5.2%.     

Crystal growth and properties of Ln2Ag1−xGa10−y (Ln=La, Ce), a disordered variant of the Ce2NiGa10-structure type

We report the flux growth and characterization of Ln₂Ag_1−xGa_10−y (Ln=La, Ce), a disordered variant of the Ce₂NiGa₁₀ structure type. Single crystals of La₂Ag_1−xGa_10−y (x∼0.3; y∼0.6) and Ce₂Ag_1−xGa_10−y (x∼0.3; y∼0.9) were grown by the self-flux method and characterized using single-crystal X-ray diffraction. Transport measurements of Ce₂Ag_1−xGa_10−y (x∼0.3; y∼0.9) reveal metallic behavior with a transition at 3 K. Magnetic measurements indicate antiferromagnetic ordering at 3 K of localized Ce³⁺ moments for Ce₂Ag_1−xGa_10−y. Magnetoresistance is positive with a maximum value of 16% at 9 T. La₂Ag_1−xGa_10−y exhibits metallic behavior with magnetic susceptibility showing temperature independent paramagnetism. We will compare Ce₂Ag_1−xGa_10−y (x∼0.3; y∼0.9) to Ce₂NiGa₁₀ to examine the effects of transition metal substitution and to the related Ce(Ag,Ga)₄ phase to examine the effects of crystal structure on the physical properties.     

Partial least squares-near infrared determination of pesticides in commercial formulations

A solvent free, fast and environmentally friendly near infrared-based methodology (NIR) was developed for pesticide determination in commercially available formulations. This methodology was based on the direct measurement of the diffuse reflectance spectra of solid samples and a multivariate calibration model (partial least squares, PLS) to determine the active principle concentration in commercial formulations. The PLS calibration set was built on using the spiked samples by mixing different amounts of pesticide standards and powdered samples. Buprofezin, Diuron and Daminozide were used as test analytes. Concentration of Buprofezin in the samples was calculated employing a 4-factors PLS calibration using the spectral information in the range between 2231–2430 and 1657–1784 nm. For Diuron determination a 1-factor PLS calibration model using the spectral range 1110–2497 nm, after a linear removed correction. Daminozide determination was carried out employing a 4-factors PLS model using the spectral information in the ranges 1644–1772 and 2014–2607 nm without baseline correction. The root mean square errors of prediction (RMSEP) found were 1.1, 1.7 and 0.7% (w/w) for Buprofezin, Diuron and Daminozide determination, respectively. The developed PLS-NIR procedure allows the determination of 120 samples/h, does not require any sample pre-treatment and avoids waste generation.     

A method for calibration and validation subset partitioning

This paper proposes a new method to divide a pool of samples into calibration and validation subsets for multivariate modelling. The proposed method is of value for analytical applications involving complex matrices, in which the composition variability of real samples cannot be easily reproduced by optimized experimental designs. A stepwise procedure is employed to select samples according to their differences in both x (instrumental responses) and y (predicted parameter) spaces. The proposed technique is illustrated in a case study involving the prediction of three quality parameters (specific mass and distillation temperatures at which 10 and 90% of the sample has evaporated) of diesel by NIR spectrometry and PLS modelling. For comparison, PLS models are also constructed by full cross-validation, as well as by using the Kennard-Stone and random sampling methods for calibration and validation subset partitioning. The obtained models are compared in terms of prediction performance by employing an independent set of samples not used for calibration or validation. The results of F-tests at 95% confidence level reveal that the proposed technique may be an advantageous alternative to the other three strategies.     

Phase equilibria and crystal structure of the complex oxides in the Sr-Fe-Co-O system

Phase relations in the Sr-Fe-Co-O system have been investigated at 1100 °C in air by X-ray powder diffraction on quenched samples. Solid solutions of the form SrFe_1−xCo_xO_3−δ (0?x?0.7), Sr₃Fe_2−yCo_yO_7−δ (0?y?0.4) and Sr₄Fe_6−zCo_zO_13±δ (0?z?1.6) were prepared by solid-state reaction and by the sol-gel method. The structural parameters of single-phase samples were refined by the Rietveld profile method. The variation of the lattice parameters with composition has been determined for each solid solution and a cross-section of the phase diagram at 1100 °C in air for the entire Sr-Fe-Co-O system has been constructed.     

Crystal structure and electrical conductivity of lanthanum-calcium chromites-titanates La1−xCaxCr1−yTiyO3−δ (x=0-1, y=0-1)

Five series of perovskite-type compounds in the system La_1−xCa_xCr_1−yTi_yO₃ with the nominal compositions y=0, x=0-0.5; y=0.2, x=0.2-0.8; y=0.5, x=0.5-1.0; y=0.8, x=0.6-1.0 and y=1, x=0.8-1 were synthesized by a ceramic technique in air (final heating 1350 °C). On the basis of the X-ray analysis of the samples with (Ca/Ti)?1, the phase diagram of the CaTiO₃-LaCr^IIIO₃-CaCr^IVO₃ quasi-ternary system was constructed. Extended solid solution with a wide homogeneity range is formed in the quasi-ternary system CaCr^IVO₃-CaTiO₃-LaCr^IIIO₃. The solid solution La_{(1−x′−y)}Ca_(x′+y)Cr^IV_x′Cr^III_{(1−x′−y)}Ti_yO₃ exists by up to 0.6-0.7 mol fractions of CaCr^IVO₃ (x^′<0.6-0.7) at the experimental conditions. The crystal structure of the compounds is orthorhombic in the space group Pbnm at room temperature. The lattice parameters and the average interatomic distances of the samples within the solid solution ranges decrease uniformly with increasing Ca content. Outside the quasi-ternary system, the nominal compositions La_0.1Ca_0.9TiO₃, La_0.2Ca_0.8TiO₃, La_0.4Ca_0.6Cr_0.2Ti_0.8O₃ and La_0.3Ca_0.7Cr_0.2Ti_0.8O₃ in the system La_1−xCa_xCr_1−yTi_yO₃ were found as single phases with an orthorhombic structure. In the temperature range between 850 and 1000 °C, the synthesized single-phase compositions are stable at pO₂=6×10⁻¹⁶-0.21×10⁵ Pa. Oxygen stoichiometry and electrical conductivity of the separate compounds were investigated as functions of temperature and oxygen partial pressure. The chemical stability of these oxides with respect to oxygen release during thermal dissociation decreases with increasing Ca-content. At 900 °C and oxygen partial pressure 1×10⁻¹⁵-0.21×10⁵ Pa, the compounds with x>y (acceptor doped) are p-type semiconductors and those with x<y (donor doped) and x=y are n-type semiconductors. The type and level of electrical conductivity are functions of the concentration ratios of cations occupying the B-sites of the perovskite structures: [Cr³⁺]/[Cr⁴⁺] and [Ti⁴⁺]/[Ti³⁺]. The maximum electrical conductivity at 900 °C and pO₂=10⁻¹⁵ Pa was found for the composition La_0.1Ca_0.9TiO₃ (near 50 S/cm) and in air at 900 °C for La_0.5Ca_0.5CrO₃ (close to 100 S/cm).     

Room temperature photoluminescence of amorphous BaxSr1−xTiO3 doped with chromium

ABO₃ amorphous materials, such as BaTiO₃ (BT), SrTiO₃ (ST), PbTiO₃ (PT), and Ba_xSr_1−xTiO₃ (BST) have recently attracted a good deal of attention due to their ferroelectric and electro-optical properties. Intense photoluminescence at room temperature was observed in amorphous titanate doped with chromium (Ba_xSr_1−xTi_1−yCr_yO₃) prepared by the polymeric precursor method. Results indicated that substantial luminescence at room temperature was achieved with the addition of small Cr contents to amorphous Ba_xSr_1−xTi_1−yCr_yO₃. Further addition of Cr or crystallization were deleterious to the intensity of the luminescent peak obtained for excitation using λ=488.0 nm.     

Combination of mid- and near-infrared spectroscopy for the determination of the quality properties of beers

The combination of infrared (MIR) and near-infrared (NIR) spectroscopy has been employed for the determination of important quality parameters of beers, such as original and real extract and alcohol content. A population of 43 samples obtained from the Spanish market and including different types of beer, was evaluated. For each technique, spectra were obtained in triplicate. In the case of NIR a 1 mm pathlength quartz flow cell was used, whereas attenuated total reflectance measurements were used in MIR. Cluster hierarchical analysis was employed to select calibration and validation data sets. The calibration set was composed of 15 samples, thus leaving 28 for validation. A critical evaluation of the prediction capability of multivariate methods established from the combination of NIR and MIR spectra was made. Partial least squares (PLS) and artificial neural networks (ANN) were evaluated for the treatment of data obtained in each individual technique and the combination of both. Different parameters of each methodology were optimized. A slightly better predictive performance was obtained for NIR-MIR combined spectra, and in all the cases ANN performs better than PLS, which may be interpreted from the existence of some non-linearity in the data. The root-mean-sqare-error of prediction (RMSEP) values obtained for the combined NIR-MIR spectra for the determination of real extract, original extract and ethanol were 0.076% w/w, 0.14% w/w and 0.091% v/v.     

Luminescent and structural properties of the series Ba6−xEuxTi2+xTa8−xO30 and Ba4−yKyEu2Ti4−yTa6+yO30

The series Ba_6−xEu_xTi_2+xTa_8−xO₃₀ and Ba_4−yK_yEu₂Ti_4−yTa_6+yO₃₀ have been synthesized at 1400°C in air. They exhibit efficient excitation at about 400 nm and typical emission of Eu³⁺ at about 580-620 nm, form solid solutions within 0.0?x?2.0 and 0?y?4 respectively, and crystallized in P4/mbm at room temperature with Eu atoms occupied at centrosymmetric site (0, 0, 0). Their conductivity is very low (2.8×10⁻⁶ Ω⁻¹ cm⁻¹ at 740°C for Ba₆Ti₂Ta₈O₃₀).     

Crystal structure and physical properties of quaternary clathrates Ba8ZnxGe46−x−ySiy, Ba8(Zn,Cu)xGe46−x and Ba8(Zn,Pd)xGe46−x

Three series of vacancy-free quaternary clathrates of type I, Ba₈Zn_xGe_46−x−ySi_y, Ba₈(Zn,Cu)_xGe_46−x, and Ba₈(Zn,Pd)_xGe_46−x, have been prepared by reactions of elemental ingots in vacuum sealed quartz at 800 °C. In all cases cubic primitive symmetry (space group Pm3?n, a∼1.1 nm) was confirmed for the clathrate phase by X-ray powder diffraction and X-ray single crystal analyses. The lattice parameters show a linear increase with increase in Ge for Ba₈Zn_xGe_46−x−ySi_y. M atoms (Zn, Pd, Cu) preferably occupy the 6d site in random mixtures. No defects were observed for the 6d site. Site preference of Ge and Si in Ba₈Zn_xGe_46−x−ySi_y has been elucidated from X-ray refinement: Ge atoms linearly substitute Si in the 24k site whilst a significant deviation from linearity is observed for occupation of the 16i site. A connectivity scheme for the phase equilibria in the “Ba₈Ge₄₆” corner at 800 °C has been derived and a three-dimensional isothermal section at 800 °C is presented for the Ba-Pd-Zn-Ge system. Studies of transport properties carried out for Ba₈{Cu,Pd,Zn}_xGe_46−x and Ba₈Zn_xSi_yGe_46−x−y evidenced predominantly electrons as charge carriers and the closeness of the systems to a metal-to-insulator transition, fine-tuned by substitution and mechanical processing of starting material Ba₈Ge₄₃. A promising figure of merit, ZT ∼0.45 at 750 K, has been derived for Ba₈Zn_7.4Ge_19.8Si_18.8, where pricey germanium is exchanged by reasonably cheap silicon.     

Energetics of magnesium, strontium, and barium doped lanthanum gallate perovskites

LaGaO₃ perovskites doped with Sr or Ba at the La site and Mg at the Ga site were prepared by solid-state reaction or sol-gel method and characterized. Enthalpies of formation from constituent oxides at 298 K were determined by high-temperature oxide melt solution calorimetry. Energetic trends are discussed in terms of defect chemistry. As oxygen deficiency increases, formation enthalpies define three trends, LaGa_1−yMg_yO_3−δ (LGM), La_1−xSr_xGa_1−yMg_yO_3−δ (LSGM), and La_1−xBa_xGa_1−yMg_yO_3−δ (LBGM). They become less exothermic with increasing doping, suggesting a dominant destabilization effect from oxygen vacancies. The endothermic enthalpy of vacancy formation is 275±37, 166±18 and 138±12 kJ/mol of V_O^·· for LGM, LBGM and LSGM, respectively. Tolerance factor and ion size mismatch also affect enthalpies. In terms of energetics, Sr is the best dopant for the La site and Mg for the Ga site, supporting earlier studies, including oxygen ion conductivity and computer modeling.     

Determination of biogenic amines in apples and wine with 8-phenyl-(4-oxy-acetic acid N-hydroxysuccinimide ester)-4, 4-difluoro-1,3,5,7-tetramethyl-4-bora-3a,4a-diaza-s-indacene by high performance liquid chromatography

A solvent free, fast and environmentally friendly photoacoustic-infrared-based methodology (PAS-FTIR) was developed for the determination of Mancozeb in agrochemicals. This methodology was based on the direct measurement of the transmittance spectra of solid samples and a multivariate calibration model to determine the active ingredient concentration. The proposed partial least squares (PLS) model was made using nine standards prepared by mixing different amounts of kaolin and Mancozeb, with concentrations between 5.43 and 88.10% (w/w).A hierarchical cluster analysis was made in order to classify the samples in terms of similarity in the PAS-FTIR spectra. From their spectra different commercially available fungicide samples were classified in four groups, attending to the presence of other active ingredients co-formulated with Mancozeb. Different PLS models were applied for the analysis of each group of samples.So, for samples containing copper oxychloride (group 1), the information in the spectral range from 1543 to 1474 and 1390 to 1269 cm⁻¹ was employed. For samples co-formulated with Fosetyl-Al (group 2) the range between 3334 and 3211 cm⁻¹, corrected with a single point baseline located at 3055 cm⁻¹, was used. For samples containing Metalaxyl (group 3) it was used the information in the spectral range from 1543 to 1474 cm⁻¹ was used to determine Mancozeb. Finally, the range between 1456 and 1306 cm⁻¹ was used for Mancozeb determination in samples containing Cymoxanil (group 4).The PLS factors used for Mancozeb determination depends on the PLS model employed. 3, 2, 2 and 3 factors were used for Mancozeb determination in commercially available pesticides for groups 1, 2, 3 and 4, respectively. The mean accuracy errors found were 3.1, 2.1, 2.5 and 3.0% for groups 1, 2, 3 and 4, respectively. The developed PAS-FTIR methodology does not consume any solvent, as no sample preparation is necessary it improves the laboratory efficiency without sacrifice the accuracy and avoids the contact of the operator with toxic substances.     

XRD and Mössbauer studies of crystallographic and magnetic transformations in synthesized Zn-substituted Cu-Ga-Fe compound

System of samples in the form of Cu_1−xZn_xFe_2−yGa_yO₄ with (0.0?x?1.0, y=0.0 and 1.0) is synthesized. X-ray diffraction study confirms the presence of a single-phase structure, where tetragonal unit cell is obtained for samples CuFe₂O₄ and CuGaFeO₄ with c/a>1. At compositional parameter x?0.25, tetragonal-to-cubic transformation occurs. The determined lattice parameter a for the cubic samples is found to decrease with increasing Zn content x. ⁵⁷Fe Mössbauer measurements at 293, 77 and 12 K show characteristic spectra of paramagnetic, magnetic, and electronic types for the different compositions. Cation distribution obtained from the spectral analysis at 12 K revealed transformation from the ferrimagnetic inverse spinel of CuFe₂O₄ to the antiferromagnetic normal spinel of ZnFe₂O₄. Hyperfine parameters are found to be strongly dependent on temperature and concentration parameter x. Low-temperature measurements are carried out using installed and well-calibrated closed-cycle variable temperature cryostat Model REF-399-D22. Low vibration is obtained through bellows, spacer, and exchange gas isolation and a difference of 0.018 mm s⁻¹ between the FWHM of a pure iron foil at room temperature and 12 K is achieved.     

Quantitative determination of acyclovir in plasma by near infrared spectroscopy

The aim of this study was to assess the feasibility of near infrared spectroscopy (NIRS) for analysis of acyclovir in plasma. This methodology was based on the direct measurement of the transmission spectra of liquid samples and a multivariate calibration model (partial least squares, PLS) to determine the acyclovir concentration in plasma sample. The PLS calibration set was built on using the spiked samples by mixing different amounts of acyclovir. Concentration of acyclovir in the plasma samples was calculated employing a 6-factors PLS calibration using the spectral information in the range of 6102-5450 cm^− 1. The root mean square errors of prediction (RMSEP) found was 1.21 for acyclovir. The developed PLS-NIRS procedure allows the determination of 120 samples/h does not require any sample pretreatment and avoids waste generation.     

Crystal structures of RPt3−xSi1−y(R=Y, Tb, Dy, Ho, Er, Tm, Yb) studied by single crystal X-ray diffraction

The crystal structures of ternary compounds RPt_3−xSi_1−y(R=Y, Tb, Dy, Ho, Er, Tm, Yb) have been elucidated from X-ray single crystal CCD data. All compounds are isotypic and crystallize in the tetragonal space group P4/mbm. The general formula RPt_3−xSi_1−y arises from defects: x≈0.20, y≈0.14. The crystal structure of RPt_3−xSi_1−y can be considered as a packing of four types of building blocks which derive from the CePt₃B-type unit cell by various degrees of distortion and Pt, Si-defects.     

Phase equilibria and crystal structure of the complex oxides in the Ln-Ba-Co-O (Ln=Nd, Sm) systems

The phase equilibria in the Ln-Ba-Co-O (Ln=Nd, Sm) systems were systematically studied at 1100 °C in air. The homogeneity ranges and crystal structure of the solid solutions: Ln_2−xBa_xO_3−δ (0<x≤0.1 for Ln=Nd and 0<x≤0.3 for Ln=Sm), Nd_3−yBa_yCo₂O₇ (0.70≤y≤0.80), BaCo_1−zSm_zO_3−δ (0.1≤z≤0.2) were determined by X-ray diffraction of quenched samples. The values of oxygen content (5+δ) for slowly cooled LnBaCo₂O_5+δ (Ln=Nd, Sm) samples were estimated as 5.73 for Ln=Nd, and 5.60 for Ln=Sm. The unit cell parameters were refined using Rietveld full-profile analysis. It was shown that NdBaCo₂O_5.73 possesses tetragonal structure and SmBaCo₂O_5.60 - orthorhombic structure. The projections of isothermal-isobaric phase diagrams for the Ln-Ba-Co-O (Ln=Nd, Sm) systems to the compositional triangle of metallic components were presented.     

Structural and magnetic properties of pyrochlore solid solutions (Y,Lu)2Ti2−x(Nb,Ta)xO7±y

The synthesis and characterization of the pyrochlore solid solutions, Y₂Ti_2−xNb_xO_7−y, Lu₂Ti_2−xNb_xO_7−y, Y₂Ti_2−xTa_xO_7−y and Lu₂TiTaO_7−y (−0.4<y<0.5), is described. Synthesis at 1600 °C, and 10⁻⁵ Torr yields oxygen deficiency in all systems. All compounds are found to be paramagnetic and semiconducting, with the size of the local moments being less, in some cases substantially less, than the expected value for the number of nominally unpaired electrons present. Thermogravimetric analysis (TGA) shows that all compounds can be fully oxidized while retaining the pyrochlore structure, yielding oxygen rich pyrochlores as white powders. Powder neutron diffraction of Y₂TiNbO₇-based samples was done. Refinement of the data for oxygen deficient Y₂TiNbO_6.76 indicates the presence of a distribution of oxygen over the 8b and 48f sites. Refinement of the data for oxygen rich Y₂TiNbO_7.5 shows these sites to be completely filled, with an additional half filling of the 8a site. The magnetic and TGA data strongly suggest a preference for a Ti³⁺/(Nb,Ta)⁵⁺ combination, as opposed to Ti⁴⁺/(Nb,Ta)⁴⁺, in this pyrochlore family. In addition, the evidence clearly points to Ti³⁺ as the source of the localized moments, with no evidence for localized Nb⁴⁺ moments.     

Electrothermal atomic absorption spectrometric determination of germanium in soils using ultrasound-assisted leaching

A procedure for determining germanium in soil samples using electrothermal atomic absorption spectrometry is discussed. The analyte is leached from the solid sample by the addition of 1 ml of concentrated hydrofluoric acid to 10-300 mg of sample, and the mixture is then submitted to a 10 min ultrasonic treatment. After adding 0.4 g boric acid and 3 ml concentrated hydrochloric acid, germanium is extracted into 1 ml chloroform and back-extracted into an aqueous phase containing (0.05%, w/v) nickel nitrate. Ten micro liter of aqueous phase are introduced into the atomizer and the analytical signal from germanium is obtained using a fast-heating cycle. The detection limit, calculated using three times the standard error of estimate (s_y/x) of the calibration graph, is 0.015 μg g⁻¹. The reliability of the procedure is verified by analyzing several certified reference materials.     

New protonic solid electrolyte with tetragonal tungsten bronze structure obtained through ionic exchange

Proton exchange reactions have been performed on tetragonal tungsten bronze-like NaNbWO₆ by using nitric acid as an exchanging agent. The characterization of the exchange reaction products has been made by means of chemical analysis, X-ray diffraction, thermal analysis, and IR spectroscopy. The exchange reaction takes place topotactically and the following formula is proposed for the obtained phase of variable composition: Na_1−xH_xNbWO₆·yH₂O (0<x?0.46 and 0?y?0.12). Impedance spectroscopy on the present proton exchanged samples indicated that these samples behaved as solid electrolytes under high humidity. As an example, the compound with the composition Na_0.68H_0.32NbWO₆·0.1 H₂O exhibits ionic conductivity of 8×10⁻³ and 1×10⁻² S cm⁻¹ at 70°C and 90°C, respectively.